1 Himax HX8357D display panels
2
3 This binding is for display panels using a Himax HX8357D controller in SPI
4 mode, such as the Adafruit 3.5" TFT for Raspberry Pi.
5
6 Required properties:
7 - compatible: "adafruit,yx350hv15", "himax,hx8357d"
8 - dc-gpios: D/C pin
9 - reg: address of the panel on the SPI bus
10
11 The node for this driver must be a child node of a SPI controller, hence
12 all mandatory properties described in ../spi/spi-bus.txt must be specified.
13
14 Optional properties:
15 - rotation: panel rotation in degrees counter clockwise (0,90,180,270)
16 - backlight: phandle of the backlight device attached to the panel
17
18 Example:
19 display@0{
20 compatible = "adafruit,yx350hv15", "himax,hx8357d";
21 reg = <0>;
22 spi-max-frequency = <32000000>;
23 dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
24 rotation = <90>;
25 backlight = <&backlight>;
26 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.