1 PXA LCD Controller
2 ------------------
3
4 Required properties:
5 - compatible : one of these
6 "marvell,pxa2xx-lcdc",
7 "marvell,pxa270-lcdc",
8 "marvell,pxa300-lcdc"
9 - reg : should contain 1 register range (address and length).
10 - interrupts : framebuffer controller interrupt.
11 - clocks: phandle to input clocks
12
13 Optional properties:
14 - lcd-supply: A phandle to a power regulator that controls the LCD voltage.
15
16 Required nodes:
17 - port: connection to the LCD panel (see video-interfaces.txt)
18 This node must have its properties bus-width and remote-endpoint set.
19 If the panel is not a TFT color panel, then a "lcd-type" property in
20 the panel should specify the panel type.
21 This panel node should be in the board dts.
22
23 Example:
24 lcd-controller@40500000 {
25 compatible = "marvell,pxa2xx-lcdc";
26 reg = <0x44000000 0x10000>;
27 interrupts = <17>;
28 clocks = <&clks CLK_LCD>;
29
30 port {
31 lcdc_out: endpoint {
32 remote-endpoint = <&panel_in>;
33 bus-width = <16>;
34 };
35 };
36 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.