1 Sitronix ST7586 display panel
2
3 Required properties:
4 - compatible: "lego,ev3-lcd".
5 - a0-gpios: The A0 signal (since this binding is for serial mode, this is
6 the pin labeled D1 on the controller, not the pin labeled A0)
7 - reset-gpios: Reset pin
8
9 The node for this driver must be a child node of a SPI controller, hence
10 all mandatory properties described in ../spi/spi-bus.txt must be specified.
11
12 Optional properties:
13 - rotation: panel rotation in degrees counter clockwise (0,90,180,270)
14
15 Example:
16 display@0{
17 compatible = "lego,ev3-lcd";
18 reg = <0>;
19 spi-max-frequency = <10000000>;
20 a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
21 reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
22 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.