~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml

Version: ~ [ linux-6.12-rc7 ] ~ [ linux-6.11.7 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.60 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.116 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.171 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.229 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.285 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.323 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.12 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
  2 %YAML 1.2
  3 ---
  4 $id: http://devicetree.org/schemas/iio/adc/ti,ads1298.yaml#
  5 $schema: http://devicetree.org/meta-schemas/core.yaml#
  6 
  7 title: Texas Instruments' ads1298 medical ADC chips
  8 
  9 description: |
 10   Datasheet at: https://www.ti.com/product/ADS1298
 11   Bindings for this chip aren't complete.
 12 
 13 maintainers:
 14   - Mike Looijmans <mike.looijmans@topic.nl>
 15 
 16 properties:
 17   compatible:
 18     enum:
 19       - ti,ads1298
 20 
 21   reg:
 22     maxItems: 1
 23 
 24   spi-cpha: true
 25 
 26   reset-gpios:
 27     maxItems: 1
 28 
 29   avdd-supply:
 30     description:
 31       Analog power supply, voltage between AVDD and AVSS. When providing a
 32       symmetric +/- 2.5V, the regulator should report 5V.
 33 
 34   vref-supply:
 35     description:
 36       Optional reference voltage. If omitted, internal reference is used,
 37       which is 2.4V when analog supply is below 4.4V, 4V otherwise.
 38 
 39   clocks:
 40     description: Optional 2.048 MHz external source clock on CLK pin
 41     maxItems: 1
 42 
 43   interrupts:
 44     description: Interrupt on DRDY pin, triggers on falling edge
 45     maxItems: 1
 46 
 47   label: true
 48 
 49 required:
 50   - compatible
 51   - reg
 52   - avdd-supply
 53   - interrupts
 54 
 55 allOf:
 56   - $ref: /schemas/spi/spi-peripheral-props.yaml#
 57 
 58 unevaluatedProperties: false
 59 
 60 examples:
 61   - |
 62     #include <dt-bindings/gpio/gpio.h>
 63     #include <dt-bindings/interrupt-controller/irq.h>
 64     spi {
 65         #address-cells = <1>;
 66         #size-cells = <0>;
 67 
 68         adc@1 {
 69           reg = <1>;
 70           compatible = "ti,ads1298";
 71           label = "ads1298-1-ecg";
 72           avdd-supply = <&reg_iso_5v_a>;
 73           clocks = <&clk_ads1298>;
 74           interrupt-parent = <&gpio0>;
 75           interrupts = <78 IRQ_TYPE_EDGE_FALLING>;
 76           spi-max-frequency = <20000000>;
 77           spi-cpha;
 78         };
 79     };
 80 ...

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php