~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml

Version: ~ [ linux-6.12-rc7 ] ~ [ linux-6.11.7 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.60 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.116 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.171 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.229 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.285 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.323 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.12 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
  2 # Copyright (c) 2022 Amarulasolutions
  3 %YAML 1.2
  4 ---
  5 $id: http://devicetree.org/schemas/media/i2c/ovti,ov5693.yaml#
  6 $schema: http://devicetree.org/meta-schemas/core.yaml#
  7 
  8 title: Omnivision OV5693/OV5695 CMOS Sensors
  9 
 10 maintainers:
 11   - Tommaso Merciai <tomm.merciai@gmail.com>
 12 
 13 description: |
 14   The Omnivision OV5693/OV5695 are high performance, 1/4-inch, 5 megapixel, CMOS
 15   image sensors that deliver 2592x1944 at 30fps. It provides full-frame,
 16   sub-sampled, and windowed 10-bit MIPI images in various formats via the
 17   Serial Camera Control Bus (SCCB) interface.
 18 
 19   OV5693/OV5695 are controlled via I2C and two-wire Serial Camera Control Bus
 20   (SCCB). The sensor output is available via CSI-2 serial data output (up to
 21   2-lane).
 22 
 23 allOf:
 24   - $ref: /schemas/media/video-interface-devices.yaml#
 25   - if:
 26       properties:
 27         compatible:
 28           contains:
 29             const: ovti,ov5693
 30     then:
 31       properties:
 32         port:
 33           properties:
 34             endpoint:
 35               required:
 36                 - link-frequencies
 37 
 38 properties:
 39   compatible:
 40     enum:
 41       - ovti,ov5693
 42       - ovti,ov5695
 43 
 44   reg:
 45     maxItems: 1
 46 
 47   clocks:
 48     description:
 49       System input clock (aka XVCLK). From 6 to 27 MHz.
 50     maxItems: 1
 51 
 52   clock-names:
 53     const: xvclk
 54 
 55   dovdd-supply:
 56     description:
 57       Digital I/O voltage supply, 1.8V.
 58 
 59   avdd-supply:
 60     description:
 61       Analog voltage supply, 2.8V.
 62 
 63   dvdd-supply:
 64     description:
 65       Digital core voltage supply, 1.2V.
 66 
 67   reset-gpios:
 68     description:
 69       The phandle and specifier for the GPIO that controls sensor reset.
 70       This corresponds to the hardware pin XSHUTDN which is physically
 71       active low.
 72     maxItems: 1
 73 
 74   port:
 75     description: MIPI CSI-2 transmitter port
 76     $ref: /schemas/graph.yaml#/$defs/port-base
 77     additionalProperties: false
 78 
 79     properties:
 80       endpoint:
 81         $ref: /schemas/media/video-interfaces.yaml#
 82         unevaluatedProperties: false
 83 
 84         properties:
 85           link-frequencies: true
 86 
 87           data-lanes:
 88             minItems: 1
 89             maxItems: 2
 90 
 91         required:
 92           - data-lanes
 93 
 94 required:
 95   - compatible
 96   - reg
 97   - clocks
 98   - port
 99 
100 unevaluatedProperties: false
101 
102 examples:
103   - |
104     #include <dt-bindings/clock/px30-cru.h>
105     #include <dt-bindings/gpio/gpio.h>
106     #include <dt-bindings/pinctrl/rockchip.h>
107 
108     i2c {
109         #address-cells = <1>;
110         #size-cells = <0>;
111 
112         ov5693: camera@36 {
113             compatible = "ovti,ov5693";
114             reg = <0x36>;
115 
116             reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
117             pinctrl-names = "default";
118             pinctrl-0 = <&cif_clkout_m0>;
119 
120             clocks = <&cru SCLK_CIF_OUT>;
121             assigned-clocks = <&cru SCLK_CIF_OUT>;
122             assigned-clock-rates = <19200000>;
123 
124             avdd-supply = <&vcc_1v8>;
125             dvdd-supply = <&vcc_1v2>;
126             dovdd-supply = <&vcc_2v8>;
127 
128             rotation = <90>;
129             orientation = <0>;
130 
131             port {
132                 ucam_out: endpoint {
133                     remote-endpoint = <&mipi_in_ucam>;
134                     data-lanes = <1 2>;
135                     link-frequencies = /bits/ 64 <450000000>;
136                 };
137             };
138         };
139     };
140 
141 ...

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php