1 * SOCIONEXT Milbeaut SDHCI controller
2
3 This file documents differences between the core properties in mmc.txt
4 and the properties used by the sdhci_milbeaut driver.
5
6 Required properties:
7 - compatible: "socionext,milbeaut-m10v-sdhci-3.0"
8 - clocks: Must contain an entry for each entry in clock-names. It is a
9 list of phandles and clock-specifier pairs.
10 See ../clocks/clock-bindings.txt for details.
11 - clock-names: Should contain the following two entries:
12 "iface" - clock used for sdhci interface
13 "core" - core clock for sdhci controller
14
15 Optional properties:
16 - fujitsu,cmd-dat-delay-select: boolean property indicating that this host
17 requires the CMD_DAT_DELAY control to be enabled.
18
19 Example:
20 sdhci3: mmc@1b010000 {
21 compatible = "socionext,milbeaut-m10v-sdhci-3.0";
22 reg = <0x1b010000 0x10000>;
23 interrupts = <0 265 0x4>;
24 voltage-ranges = <3300 3300>;
25 bus-width = <4>;
26 clocks = <&clk 7>, <&ahb_clk>;
27 clock-names = "core", "iface";
28 cap-sdio-irq;
29 fujitsu,cmd-dat-delay-select;
30 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.