~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml

Version: ~ [ linux-6.12-rc7 ] ~ [ linux-6.11.7 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.60 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.116 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.171 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.229 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.285 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.323 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.12 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 # SPDX-License-Identifier: GPL-2.0
  2 %YAML 1.2
  3 ---
  4 $id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc-common.yaml#
  5 $schema: http://devicetree.org/meta-schemas/core.yaml#
  6 
  7 title: Synopsys Designware Mobile Storage Host Controller Common Properties
  8 
  9 allOf:
 10   - $ref: mmc-controller.yaml#
 11 
 12 maintainers:
 13   - Ulf Hansson <ulf.hansson@linaro.org>
 14 
 15 # Everything else is described in the common file
 16 properties:
 17   resets:
 18     maxItems: 1
 19 
 20   reset-names:
 21     const: reset
 22 
 23   clock-frequency:
 24     description:
 25       Should be the frequency (in Hz) of the ciu clock.  If this
 26       is specified and the ciu clock is specified then we'll try to set the ciu
 27       clock to this at probe time.
 28 
 29   fifo-depth:
 30     description:
 31       The maximum size of the tx/rx fifo's. If this property is not
 32       specified, the default value of the fifo size is determined from the
 33       controller registers.
 34     $ref: /schemas/types.yaml#/definitions/uint32
 35 
 36   card-detect-delay:
 37     description:
 38       Delay in milli-seconds before detecting card after card
 39       insert event. The default value is 0.
 40     $ref: /schemas/types.yaml#/definitions/uint32
 41     default: 0
 42 
 43   data-addr:
 44     description:
 45       Override fifo address with value provided by DT. The default FIFO reg
 46       offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A)
 47       by driver. If the controller does not follow this rule, please use
 48       this property to set fifo address in device tree.
 49     $ref: /schemas/types.yaml#/definitions/uint32
 50 
 51   fifo-watermark-aligned:
 52     description:
 53       Data done irq is expected if data length is less than
 54       watermark in PIO mode. But fifo watermark is requested to be aligned
 55       with data length in some SoC so that TX/RX irq can be generated with
 56       data done irq. Add this watermark quirk to mark this requirement and
 57       force fifo watermark setting accordingly.
 58     $ref: /schemas/types.yaml#/definitions/flag
 59 
 60   dmas:
 61     maxItems: 1
 62 
 63   dma-names:
 64     const: rx-tx
 65 
 66 additionalProperties: true

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php