1 * CA8210 IEEE 802.15.4 *
2
3 Required properties:
4 - compatible: Should be "cascoda,ca8210"
5 - reg: Controlling chip select
6 - spi-max-frequency: Maximum clock speed, should be *less than*
7 4000000
8 - spi-cpol: Requires inverted clock polarity
9 - reset-gpio: GPIO attached to reset
10 - irq-gpio: GPIO attached to IRQ
11 Optional properties:
12 - extclock-enable: Include for the ca8210 to route its 16MHz clock
13 to an output
14 - extclock-freq: Frequency in Hz of the external clock
15 - extclock-gpio: GPIO of the ca8210 to output the clock on
16
17 Example:
18 ca8210@0 {
19 compatible = "cascoda,ca8210";
20 reg = <0>;
21 spi-max-frequency = <3000000>;
22 spi-cpol;
23 reset-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
24 irq-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
25 extclock-enable;
26 extclock-freq = 16000000;
27 extclock-gpio = 2;
28 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.