1 * NXP LPC32xx SoC Ethernet Controller
2
3 Required properties:
4 - compatible: Should be "nxp,lpc-eth"
5 - reg: Address and length of the register set for the device
6 - interrupts: Should contain ethernet controller interrupt
7
8 Optional properties:
9 - phy-mode: See ethernet.txt file in the same directory. If the property is
10 absent, "rmii" is assumed.
11 - use-iram: Use LPC32xx internal SRAM (IRAM) for DMA buffering
12
13 Optional subnodes:
14 - mdio : specifies the mdio bus, used as a container for phy nodes according to
15 phy.txt in the same directory
16
17
18 Example:
19
20 mac: ethernet@31060000 {
21 compatible = "nxp,lpc-eth";
22 reg = <0x31060000 0x1000>;
23 interrupt-parent = <&mic>;
24 interrupts = <29 0>;
25
26 phy-mode = "rmii";
27 use-iram;
28 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.