1 * Marvell PXA168 Ethernet Controller
2
3 Required properties:
4 - compatible: should be "marvell,pxa168-eth".
5 - reg: address and length of the register set for the device.
6 - interrupts: interrupt for the device.
7 - clocks: pointer to the clock for the device.
8
9 Optional properties:
10 - port-id: Ethernet port number. Should be '0','1' or '2'.
11 - #address-cells: must be 1 when using sub-nodes.
12 - #size-cells: must be 0 when using sub-nodes.
13 - phy-handle: see ethernet.txt file in the same directory.
14
15 The MAC address will be determined using the optional properties
16 defined in ethernet.txt.
17
18 Sub-nodes:
19 Each PHY can be represented as a sub-node. This is not mandatory.
20
21 Sub-nodes required properties:
22 - reg: the MDIO address of the PHY.
23
24 Example:
25
26 eth0: ethernet@f7b90000 {
27 compatible = "marvell,pxa168-eth";
28 reg = <0xf7b90000 0x10000>;
29 clocks = <&chip CLKID_GETH0>;
30 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
31 #address-cells = <1>;
32 #size-cells = <0>;
33 phy-handle = <ðphy0>;
34
35 ethphy0: ethernet-phy@0 {
36 reg = <0>;
37 };
38 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.