1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2 %YAML 1.2 3 --- 4 $id: http://devicetree.org/schemas/net/pse-pd/pse-controller.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 6 7 title: Power Sourcing Equipment (PSE). 8 9 description: Binding for the Power Sourcing Equipment (PSE) as defined in the 10 IEEE 802.3 specification. It is designed for hardware which is delivering 11 power over twisted pair/ethernet cable. The ethernet-pse nodes should be 12 used to describe PSE controller and referenced by the ethernet-phy node. 13 14 maintainers: 15 - Oleksij Rempel <o.rempel@pengutronix.de> 16 - Kory Maincent <kory.maincent@bootlin.com> 17 18 properties: 19 $nodename: 20 pattern: "^ethernet-pse(@.*|-([0-9]|[1-9][0-9]+))?$" 21 22 "#pse-cells": 23 description: 24 Used to uniquely identify a PSE instance within an IC. Will be 25 0 on PSE nodes with only a single output and at least 1 on nodes 26 controlling several outputs which are not described in the pse-pis 27 subnode. This property is deprecated, please use pse-pis instead. 28 enum: [0, 1] 29 30 pse-pis: 31 type: object 32 description: 33 Overview of the PSE PIs provided by the controller. 34 35 properties: 36 "#address-cells": 37 const: 1 38 39 "#size-cells": 40 const: 0 41 42 required: 43 - "#address-cells" 44 - "#size-cells" 45 46 patternProperties: 47 "^pse-pi@[0-9a-f]+$": 48 type: object 49 description: 50 PSE PI for power delivery via pairsets, compliant with IEEE 51 802.3-2022, Section 145.2.4. Each pairset comprises a positive and 52 a negative VPSE pair, adhering to the pinout configurations 53 detailed in the standard. 54 See Documentation/networking/pse-pd/pse-pi.rst for details. 55 56 properties: 57 reg: 58 description: 59 Address describing the PSE PI index. 60 maxItems: 1 61 62 "#pse-cells": 63 const: 0 64 65 pairset-names: 66 $ref: /schemas/types.yaml#/definitions/string-array 67 description: 68 Names of the pairsets as per IEEE 802.3-2022, Section 145.2.4. 69 Each name should correspond to a phandle in the 'pairset' 70 property pointing to the power supply for that pairset. 71 minItems: 1 72 maxItems: 2 73 items: 74 enum: 75 - alternative-a 76 - alternative-b 77 78 pairsets: 79 $ref: /schemas/types.yaml#/definitions/phandle-array 80 description: 81 List of phandles, each pointing to the power supply for the 82 corresponding pairset named in 'pairset-names'. This property 83 aligns with IEEE 802.3-2022, Section 33.2.3 and 145.2.4. 84 PSE Pinout Alternatives (as per IEEE 802.3-2022 Table 145\u20133) 85 |-----------|---------------|---------------|---------------|---------------| 86 | Conductor | Alternative A | Alternative A | Alternative B | Alternative B | 87 | | (MDI-X) | (MDI) | (X) | (S) | 88 |-----------|---------------|---------------|---------------|---------------| 89 | 1 | Negative VPSE | Positive VPSE | - | - | 90 | 2 | Negative VPSE | Positive VPSE | - | - | 91 | 3 | Positive VPSE | Negative VPSE | - | - | 92 | 4 | - | - | Negative VPSE | Positive VPSE | 93 | 5 | - | - | Negative VPSE | Positive VPSE | 94 | 6 | Positive VPSE | Negative VPSE | - | - | 95 | 7 | - | - | Positive VPSE | Negative VPSE | 96 | 8 | - | - | Positive VPSE | Negative VPSE | 97 minItems: 1 98 maxItems: 2 99 100 polarity-supported: 101 $ref: /schemas/types.yaml#/definitions/string-array 102 description: 103 Polarity configuration supported by the PSE PI pairsets. 104 minItems: 1 105 maxItems: 4 106 items: 107 enum: 108 - MDI-X 109 - MDI 110 - X 111 - S 112 113 vpwr-supply: 114 description: Regulator power supply for the PSE PI. 115 116 required: 117 - reg 118 - "#pse-cells" 119 120 oneOf: 121 - required: 122 - "#pse-cells" 123 - required: 124 - pse-pis 125 126 additionalProperties: true 127 128 ...
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.