1 Marvell 88PM800 regulator
2
3 Required properties:
4 - compatible: "marvell,88pm800"
5 - reg: I2C slave address
6 - regulators: A node that houses a sub-node for each regulator within the
7 device. Each sub-node is identified using the node's name (or the deprecated
8 regulator-compatible property if present), with valid values listed below.
9 The content of each sub-node is defined by the standard binding for
10 regulators; see regulator.txt.
11
12 The valid names for regulators are:
13
14 buck1, buck2, buck3, buck4, buck5, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7,
15 ldo8, ldo9, ldo10, ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19
16
17 Example:
18
19 pmic: 88pm800@31 {
20 compatible = "marvell,88pm800";
21 reg = <0x31>;
22
23 regulators {
24 buck1 {
25 regulator-min-microvolt = <600000>;
26 regulator-max-microvolt = <3950000>;
27 regulator-boot-on;
28 regulator-always-on;
29 };
30 ldo1 {
31 regulator-min-microvolt = <600000>;
32 regulator-max-microvolt = <15000000>;
33 regulator-boot-on;
34 regulator-always-on;
35 };
36 ...
37 };
38 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.