1 Binding for the Synopsys HSDK reset controller
2
3 This binding uses the common reset binding[1].
4
5 [1] Documentation/devicetree/bindings/reset/reset.txt
6
7 Required properties:
8 - compatible: should be "snps,hsdk-reset".
9 - reg: should always contain 2 pairs address - length: first for reset
10 configuration register and second for corresponding SW reset and status bits
11 register.
12 - #reset-cells: from common reset binding; Should always be set to 1.
13
14 Example:
15 reset: reset@880 {
16 compatible = "snps,hsdk-reset";
17 #reset-cells = <1>;
18 reg = <0x8A0 0x4>, <0xFF0 0x4>;
19 };
20
21 Specifying reset lines connected to IP modules:
22 ethernet@.... {
23 ....
24 resets = <&reset HSDK_V1_ETH_RESET>;
25 ....
26 };
27
28 The index could be found in <dt-bindings/reset/snps,hsdk-reset.h>
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.