1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 2 %YAML 1.2 3 --- 4 $id: http://devicetree.org/schemas/sound/wlf,wm8960.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 6 7 title: Wolfson WM8960 audio codec 8 9 maintainers: 10 - patches@opensource.cirrus.com 11 12 properties: 13 compatible: 14 const: wlf,wm8960 15 16 reg: 17 maxItems: 1 18 19 clocks: 20 maxItems: 1 21 22 clock-names: 23 items: 24 - const: mclk 25 26 '#sound-dai-cells': 27 const: 0 28 29 AVDD-supply: 30 description: Analogue supply. 31 32 DBVDD-supply: 33 description: Digital Buffer Supply. 34 35 DCVDD-supply: 36 description: Digital Core Supply. 37 38 SPKVDD1-supply: 39 description: Supply for speaker drivers 1. 40 41 SPKVDD2-supply: 42 description: Supply for speaker drivers 2. 43 44 wlf,capless: 45 type: boolean 46 description: 47 If present, OUT3 pin will be enabled and disabled together with HP_L and 48 HP_R pins in response to jack detect events. 49 50 wlf,gpio-cfg: 51 $ref: /schemas/types.yaml#/definitions/uint32-array 52 maxItems: 2 53 description: | 54 A list of GPIO configuration register values. 55 - gpio-cfg[0]: ALRCGPIO of R9 (Audio interface) 56 - gpio-cfg[1]: {GPIOPOL:GPIOSEL[2:0]} of R48 (Additional Control 4). 57 58 wlf,hp-cfg: 59 $ref: /schemas/types.yaml#/definitions/uint32-array 60 maxItems: 3 61 description: | 62 A list of headphone jack detect configuration register values: 63 - hp-cfg[0]: HPSEL[1:0] of R48 (Additional Control 4). 64 - hp-cfg[1]: {HPSWEN:HPSWPOL} of R24 (Additional Control 2). 65 - hp-cfg[2]: {TOCLKSEL:TOEN} of R23 (Additional Control 1). 66 67 wlf,shared-lrclk: 68 type: boolean 69 description: 70 If present, the LRCM bit of R24 (Additional control 2) gets set, 71 indicating that ADCLRC and DACLRC pins will be disabled only when ADC 72 (Left and Right) and DAC (Left and Right) are disabled. 73 When WM8960 works on synchronize mode and DACLRC pin is used to supply 74 frame clock, it will no frame clock for captrue unless enable DAC to 75 enable DACLRC pin. If shared-lrclk is present, no need to enable DAC for 76 captrue. 77 78 required: 79 - compatible 80 - reg 81 82 allOf: 83 - $ref: dai-common.yaml# 84 85 unevaluatedProperties: false 86 87 examples: 88 - | 89 i2c { 90 #address-cells = <1>; 91 #size-cells = <0>; 92 93 audio-codec@1a { 94 compatible = "wlf,wm8960"; 95 reg = <0x1a>; 96 clocks = <&clks 0>; 97 clock-names = "mclk"; 98 #sound-dai-cells = <0>; 99 wlf,hp-cfg = <3 2 3>; 100 wlf,gpio-cfg = <1 3>; 101 wlf,shared-lrclk; 102 DCVDD-supply = <®_audio>; 103 DBVDD-supply = <®_audio>; 104 AVDD-supply = <®_audio>; 105 SPKVDD1-supply = <®_audio>; 106 SPKVDD2-supply = <®_audio>; 107 }; 108 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.