1 Kernel Driver IBMPOWERNV 2 ======================== 3 4 Supported systems: 5 6 * Any recent IBM P servers based on POWERNV platform 7 8 Author: Neelesh Gupta 9 10 Description 11 ----------- 12 13 This driver implements reading the platform sensors data like temperature/fan/ 14 voltage/power for 'POWERNV' platform. 15 16 The driver uses the platform device infrastructure. It probes the device tree 17 for sensor devices during the __init phase and registers them with the 'hwmon'. 18 'hwmon' populates the 'sysfs' tree having attribute files, each for a given 19 sensor type and its attribute data. 20 21 All the nodes in the DT appear under "/ibm,opal/sensors" and each valid node in 22 the DT maps to an attribute file in 'sysfs'. The node exports unique 'sensor-id' 23 which the driver uses to make an OPAL call to the firmware. 24 25 Usage notes 26 ----------- 27 The driver is built statically with the kernel by enabling the config 28 CONFIG_SENSORS_IBMPOWERNV. It can also be built as module 'ibmpowernv'. 29 30 Sysfs attributes 31 ---------------- 32 33 ======================= ======================================================= 34 fanX_input Measured RPM value. 35 fanX_min Threshold RPM for alert generation. 36 fanX_fault - 0: No fail condition 37 - 1: Failing fan 38 39 tempX_input Measured ambient temperature. 40 tempX_max Threshold ambient temperature for alert generation. 41 tempX_highest Historical maximum temperature 42 tempX_lowest Historical minimum temperature 43 tempX_enable Enable/disable all temperature sensors belonging to the 44 sub-group. In POWER9, this attribute corresponds to 45 each OCC. Using this attribute each OCC can be asked to 46 disable/enable all of its temperature sensors. 47 48 - 1: Enable 49 - 0: Disable 50 51 inX_input Measured power supply voltage (millivolt) 52 inX_fault - 0: No fail condition. 53 - 1: Failing power supply. 54 inX_highest Historical maximum voltage 55 inX_lowest Historical minimum voltage 56 inX_enable Enable/disable all voltage sensors belonging to the 57 sub-group. In POWER9, this attribute corresponds to 58 each OCC. Using this attribute each OCC can be asked to 59 disable/enable all of its voltage sensors. 60 61 - 1: Enable 62 - 0: Disable 63 64 powerX_input Power consumption (microWatt) 65 powerX_input_highest Historical maximum power 66 powerX_input_lowest Historical minimum power 67 powerX_enable Enable/disable all power sensors belonging to the 68 sub-group. In POWER9, this attribute corresponds to 69 each OCC. Using this attribute each OCC can be asked to 70 disable/enable all of its power sensors. 71 72 - 1: Enable 73 - 0: Disable 74 75 currX_input Measured current (milliampere) 76 currX_highest Historical maximum current 77 currX_lowest Historical minimum current 78 currX_enable Enable/disable all current sensors belonging to the 79 sub-group. In POWER9, this attribute corresponds to 80 each OCC. Using this attribute each OCC can be asked to 81 disable/enable all of its current sensors. 82 83 - 1: Enable 84 - 0: Disable 85 86 energyX_input Cumulative energy (microJoule) 87 ======================= =======================================================
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.