1 .. SPDX-License-Identifier: GPL-2.0 2 3 ================ 4 ADIS16480 driver 5 ================ 6 7 This driver supports Analog Device's IMUs on SPI bus. 8 9 1. Supported devices 10 ==================== 11 12 * `ADIS16375 <https://www.analog.com/ADIS16375>`_ 13 * `ADIS16480 <https://www.analog.com/ADIS16480>`_ 14 * `ADIS16485 <https://www.analog.com/ADIS16485>`_ 15 * `ADIS16488 <https://www.analog.com/ADIS16488>`_ 16 * `ADIS16490 <https://www.analog.com/ADIS16490>`_ 17 * `ADIS16495 <https://www.analog.com/ADIS16495>`_ 18 * `ADIS16497 <https://www.analog.com/ADIS16497>`_ 19 * `ADIS16545 <https://www.analog.com/ADIS16545>`_ 20 * `ADIS16547 <https://www.analog.com/ADIS16547>`_ 21 22 Each supported device is a complete inertial system that includes a triaxial 23 gyroscope and a triaxial accelerometer. Each inertial sensor in device combines 24 with signal conditioning that optimizes dynamic performance. The factory 25 calibration characterizes each sensor for sensitivity, bias, and alignment. As 26 a result, each sensor has its own dynamic compensation formulas that provide 27 accurate sensor measurements. 28 29 2. Device attributes 30 ==================== 31 32 Accelerometer, gyroscope measurements are always provided. Furthermore, the 33 driver offers the capability to retrieve the delta angle and the delta velocity 34 measurements computed by the device. 35 36 The delta angle measurements represent a calculation of angular displacement 37 between each sample update, while the delta velocity measurements represent a 38 calculation of linear velocity change between each sample update. 39 40 Finally, temperature data are provided which show a coarse measurement of 41 the temperature inside of the IMU device. This data is most useful for 42 monitoring relative changes in the thermal environment. 43 44 ADIS16480 and ADIS16488 also provide access to barometric pressure data and 45 triaxial magnetometer measurements. 46 47 Each IIO device, has a device folder under ``/sys/bus/iio/devices/iio:deviceX``, 48 where X is the IIO index of the device. Under these folders reside a set of 49 device files, depending on the characteristics and features of the hardware 50 device in questions. These files are consistently generalized and documented in 51 the IIO ABI documentation. 52 53 The following tables show the adis16480 related device files, found in the 54 specific device folder path ``/sys/bus/iio/devices/iio:deviceX``. 55 56 **Available only for ADIS16480 and ADIS16488:** 57 58 +------------------------------------------+---------------------------------------------------------+ 59 | 3-Axis Magnetometer related device files | Description | 60 +------------------------------------------+---------------------------------------------------------+ 61 | in_magn_scale | Scale for the magnetometer channels. | 62 +------------------------------------------+---------------------------------------------------------+ 63 | in_magn_x_calibbias | Calibration offset for the X-axis magnetometer channel. | 64 +------------------------------------------+---------------------------------------------------------+ 65 | in_magn_x_filter_low_pass_3db_frequency | Bandwidth for the X-axis magnetometer channel. | 66 +------------------------------------------+---------------------------------------------------------+ 67 | in_magn_x_raw | Raw X-axis magnetometer channel value. | 68 +------------------------------------------+---------------------------------------------------------+ 69 | in_magn_y_calibbias | Calibration offset for the Y-axis magnetometer channel. | 70 +------------------------------------------+---------------------------------------------------------+ 71 | in_magn_y_filter_low_pass_3db_frequency | Bandwidth for the Y-axis magnetometer channel. | 72 +------------------------------------------+---------------------------------------------------------+ 73 | in_magn_y_raw | Raw Y-axis magnetometer channel value. | 74 +------------------------------------------+---------------------------------------------------------+ 75 | in_magn_z_calibbias | Calibration offset for the Z-axis magnetometer channel. | 76 +------------------------------------------+---------------------------------------------------------+ 77 | in_magn_z_filter_low_pass_3db_frequency | Bandwidth for the Z-axis magnetometer channel. | 78 +------------------------------------------+---------------------------------------------------------+ 79 | in_magn_z_raw | Raw Z-axis magnetometer channel value. | 80 +------------------------------------------+---------------------------------------------------------+ 81 82 +------------------------------------------+-----------------------------------------------------+ 83 | Barometric pressure sensor related files | Description | 84 +------------------------------------------+-----------------------------------------------------+ 85 | in_pressure0_calibbias | Calibration offset for barometric pressure channel. | 86 +------------------------------------------+-----------------------------------------------------+ 87 | in_pressure0_raw | Raw barometric pressure channel value. | 88 +------------------------------------------+-----------------------------------------------------+ 89 | in_pressure0_scale | Scale for the barometric pressure sensor channel. | 90 +------------------------------------------+-----------------------------------------------------+ 91 92 **Available for all supported devices:** 93 94 +-------------------------------------------+----------------------------------------------------------+ 95 | 3-Axis Accelerometer related device files | Description | 96 +-------------------------------------------+----------------------------------------------------------+ 97 | in_accel_scale | Scale for the accelerometer channels. | 98 +-------------------------------------------+----------------------------------------------------------+ 99 | in_accel_x_calibbias | Calibration offset for the X-axis accelerometer channel. | 100 +-------------------------------------------+----------------------------------------------------------+ 101 | in_accel_x_calibscale | Calibration scale for the X-axis accelerometer channel. | 102 +-------------------------------------------+----------------------------------------------------------+ 103 | in_accel_x_filter_low_pass_3db_frequency | Bandwidth for the X-axis accelerometer channel. | 104 +-------------------------------------------+----------------------------------------------------------+ 105 | in_accel_x_raw | Raw X-axis accelerometer channel value. | 106 +-------------------------------------------+----------------------------------------------------------+ 107 | in_accel_y_calibbias | Calibration offset for the Y-axis accelerometer channel. | 108 +-------------------------------------------+----------------------------------------------------------+ 109 | in_accel_y_calibscale | Calibration scale for the Y-axis accelerometer channel. | 110 +-------------------------------------------+----------------------------------------------------------+ 111 | in_accel_y_filter_low_pass_3db_frequency | Bandwidth for the Y-axis accelerometer channel. | 112 +-------------------------------------------+----------------------------------------------------------+ 113 | in_accel_y_raw | Raw Y-axis accelerometer channel value. | 114 +-------------------------------------------+----------------------------------------------------------+ 115 | in_accel_z_calibbias | Calibration offset for the Z-axis accelerometer channel. | 116 +-------------------------------------------+----------------------------------------------------------+ 117 | in_accel_z_calibscale | Calibration scale for the Z-axis accelerometer channel. | 118 +-------------------------------------------+----------------------------------------------------------+ 119 | in_accel_z_filter_low_pass_3db_frequency | Bandwidth for the Z-axis accelerometer channel. | 120 +-------------------------------------------+----------------------------------------------------------+ 121 | in_accel_z_raw | Raw Z-axis accelerometer channel value. | 122 +-------------------------------------------+----------------------------------------------------------+ 123 | in_deltavelocity_scale | Scale for delta velocity channels. | 124 +-------------------------------------------+----------------------------------------------------------+ 125 | in_deltavelocity_x_raw | Raw X-axis delta velocity channel value. | 126 +-------------------------------------------+----------------------------------------------------------+ 127 | in_deltavelocity_y_raw | Raw Y-axis delta velocity channel value. | 128 +-------------------------------------------+----------------------------------------------------------+ 129 | in_deltavelocity_z_raw | Raw Z-axis delta velocity channel value. | 130 +-------------------------------------------+----------------------------------------------------------+ 131 132 +--------------------------------------------+------------------------------------------------------+ 133 | 3-Axis Gyroscope related device files | Description | 134 +--------------------------------------------+------------------------------------------------------+ 135 | in_anglvel_scale | Scale for the gyroscope channels. | 136 +--------------------------------------------+------------------------------------------------------+ 137 | in_anglvel_x_calibbias | Calibration offset for the X-axis gyroscope channel. | 138 +--------------------------------------------+------------------------------------------------------+ 139 | in_anglvel_x_calibscale | Calibration scale for the X-axis gyroscope channel. | 140 +--------------------------------------------+------------------------------------------------------+ 141 | in_anglvel_x_filter_low_pass_3db_frequency | Bandwidth for the X-axis gyroscope channel. | 142 +--------------------------------------------+------------------------------------------------------+ 143 | in_anglvel_x_raw | Raw X-axis gyroscope channel value. | 144 +--------------------------------------------+------------------------------------------------------+ 145 | in_anglvel_y_calibbias | Calibration offset for the Y-axis gyroscope channel. | 146 +--------------------------------------------+------------------------------------------------------+ 147 | in_anglvel_y_calibscale | Calibration scale for the Y-axis gyroscope channel. | 148 +--------------------------------------------+------------------------------------------------------+ 149 | in_anglvel_y_filter_low_pass_3db_frequency | Bandwidth for the Y-axis gyroscope channel. | 150 +--------------------------------------------+------------------------------------------------------+ 151 | in_anglvel_y_raw | Raw Y-axis gyroscope channel value. | 152 +--------------------------------------------+------------------------------------------------------+ 153 | in_anglvel_z_calibbias | Calibration offset for the Z-axis gyroscope channel. | 154 +--------------------------------------------+------------------------------------------------------+ 155 | in_anglvel_z_calibscale | Calibration scale for the Z-axis gyroscope channel. | 156 +--------------------------------------------+------------------------------------------------------+ 157 | in_anglvel_z_filter_low_pass_3db_frequency | Bandwidth for the Z-axis gyroscope channel. | 158 +--------------------------------------------+------------------------------------------------------+ 159 | in_anglvel_z_raw | Raw Z-axis gyroscope channel value. | 160 +--------------------------------------------+------------------------------------------------------+ 161 | in_deltaangl_scale | Scale for delta angle channels. | 162 +--------------------------------------------+------------------------------------------------------+ 163 | in_deltaangl_x_raw | Raw X-axis delta angle channel value. | 164 +--------------------------------------------+------------------------------------------------------+ 165 | in_deltaangl_y_raw | Raw Y-axis delta angle channel value. | 166 +--------------------------------------------+------------------------------------------------------+ 167 | in_deltaangl_z_raw | Raw Z-axis delta angle channel value. | 168 +--------------------------------------------+------------------------------------------------------+ 169 170 +----------------------------------+-------------------------------------------+ 171 | Temperature sensor related files | Description | 172 +----------------------------------+-------------------------------------------+ 173 | in_temp0_raw | Raw temperature channel value. | 174 +----------------------------------+-------------------------------------------+ 175 | in_temp0_offset | Offset for the temperature sensor channel.| 176 +----------------------------------+-------------------------------------------+ 177 | in_temp0_scale | Scale for the temperature sensor channel. | 178 +----------------------------------+-------------------------------------------+ 179 180 +-------------------------------+---------------------------------------------------------+ 181 | Miscellaneous device files | Description | 182 +-------------------------------+---------------------------------------------------------+ 183 | name | Name of the IIO device. | 184 +-------------------------------+---------------------------------------------------------+ 185 | sampling_frequency | Currently selected sample rate. | 186 +-------------------------------+---------------------------------------------------------+ 187 188 The following table shows the adis16480 related device debug files, found in the 189 specific device debug folder path ``/sys/kernel/debug/iio/iio:deviceX``. 190 191 +----------------------+-------------------------------------------------------------------------+ 192 | Debugfs device files | Description | 193 +----------------------+-------------------------------------------------------------------------+ 194 | serial_number | The serial number of the chip in hexadecimal format. | 195 +----------------------+-------------------------------------------------------------------------+ 196 | product_id | Chip specific product id (e.g. 16480, 16488, 16545, etc.). | 197 +----------------------+-------------------------------------------------------------------------+ 198 | flash_count | The number of flash writes performed on the device. | 199 +----------------------+-------------------------------------------------------------------------+ 200 | firmware_revision | String containing the firmware revision in the following format ##.##. | 201 +----------------------+-------------------------------------------------------------------------+ 202 | firmware_date | String containing the firmware date in the following format mm-dd-yyyy. | 203 +----------------------+-------------------------------------------------------------------------+ 204 205 Channels processed values 206 ------------------------- 207 208 A channel value can be read from its _raw attribute. The value returned is the 209 raw value as reported by the devices. To get the processed value of the channel, 210 apply the following formula: 211 212 .. code-block:: bash 213 214 processed value = (_raw + _offset) * _scale 215 216 Where _offset and _scale are device attributes. If no _offset attribute is 217 present, simply assume its value is 0. 218 219 The adis16480 driver offers data for 7 types of channels, the table below shows 220 the measurement units for the processed value, which are defined by the IIO 221 framework: 222 223 +--------------------------------------+---------------------------+ 224 | Channel type | Measurement unit | 225 +--------------------------------------+---------------------------+ 226 | Acceleration on X, Y, and Z axis | Meters per Second squared | 227 +--------------------------------------+---------------------------+ 228 | Angular velocity on X, Y and Z axis | Radians per second | 229 +--------------------------------------+---------------------------+ 230 | Delta velocity on X. Y, and Z axis | Meters per Second | 231 +--------------------------------------+---------------------------+ 232 | Delta angle on X, Y, and Z axis | Radians | 233 +--------------------------------------+---------------------------+ 234 | Temperature | Millidegrees Celsius | 235 +--------------------------------------+---------------------------+ 236 | Magnetic field along X, Y and Z axis | Gauss | 237 +--------------------------------------+---------------------------+ 238 | Barometric pressure | kilo Pascal | 239 +--------------------------------------+---------------------------+ 240 241 Usage examples 242 -------------- 243 244 Show device name: 245 246 .. code-block:: bash 247 248 root:/sys/bus/iio/devices/iio:device0> cat name 249 adis16545-1 250 251 Show accelerometer channels value: 252 253 .. code-block:: bash 254 255 root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_raw 256 1376728 257 root:/sys/bus/iio/devices/iio:device0> cat in_accel_y_raw 258 4487621 259 root:/sys/bus/iio/devices/iio:device0> cat in_accel_z_raw 260 262773792 261 root:/sys/bus/iio/devices/iio:device0> cat in_accel_scale 262 0.000000037 263 264 - X-axis acceleration = in_accel_x_raw * in_accel_scale = 0.050938936 m/s^2 265 - Y-axis acceleration = in_accel_y_raw * in_accel_scale = 0.166041977 m/s^2 266 - Z-axis acceleration = in_accel_z_raw * in_accel_scale = 9.722630304 m/s^2 267 268 Show gyroscope channels value: 269 270 .. code-block:: bash 271 272 root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_x_raw 273 -1041702 274 root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_y_raw 275 -273013 276 root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_z_raw 277 2745116 278 root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_scale 279 0.000000001 280 281 - X-axis angular velocity = in_anglvel_x_raw * in_anglvel_scale = −0.001041702 rad/s 282 - Y-axis angular velocity = in_anglvel_y_raw * in_anglvel_scale = −0.000273013 rad/s 283 - Z-axis angular velocity = in_anglvel_z_raw * in_anglvel_scale = 0.002745116 rad/s 284 285 Set calibration offset for accelerometer channels: 286 287 .. code-block:: bash 288 289 root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_calibbias 290 0 291 292 root:/sys/bus/iio/devices/iio:device0> echo 5000 > in_accel_x_calibbias 293 root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_calibbias 294 5000 295 296 Set calibration offset for gyroscope channels: 297 298 .. code-block:: bash 299 300 root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_y_calibbias 301 0 302 303 root:/sys/bus/iio/devices/iio:device0> echo -5000 > in_anglvel_y_calibbias 304 root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_y_calibbias 305 -5000 306 307 Set sampling frequency: 308 309 .. code-block:: bash 310 311 root:/sys/bus/iio/devices/iio:device0> cat sampling_frequency 312 4250.000000 313 314 root:/sys/bus/iio/devices/iio:device0> echo 1000 > sampling_frequency 315 1062.500000 316 317 Set bandwidth for accelerometer channels: 318 319 .. code-block:: bash 320 321 root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_filter_low_pass_3db_frequency 322 0 323 324 root:/sys/bus/iio/devices/iio:device0> echo 300 > in_accel_x_filter_low_pass_3db_frequency 325 root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_filter_low_pass_3db_frequency 326 300 327 328 Show serial number: 329 330 .. code-block:: bash 331 332 root:/sys/kernel/debug/iio/iio:device0> cat serial_number 333 0x000c 334 335 Show product id: 336 337 .. code-block:: bash 338 339 root:/sys/kernel/debug/iio/iio:device0> cat product_id 340 16545 341 342 Show flash count: 343 344 .. code-block:: bash 345 346 root:/sys/kernel/debug/iio/iio:device0> cat flash_count 347 88 348 349 Show firmware revision: 350 351 .. code-block:: bash 352 353 root:/sys/kernel/debug/iio/iio:device0> cat firmware_revision 354 1.4 355 356 Show firmware date: 357 358 .. code-block:: bash 359 360 root:/sys/kernel/debug/iio/iio:device0> cat firmware_date 361 09-23-2023 362 363 3. Device buffers 364 ================= 365 366 This driver supports IIO buffers. 367 368 All devices support retrieving the raw acceleration, gyroscope and temperature 369 measurements using buffers. 370 371 The following device families also support retrieving the delta velocity, delta 372 angle and temperature measurements using buffers: 373 374 - ADIS16545 375 - ADIS16547 376 377 However, when retrieving acceleration or gyroscope data using buffers, delta 378 readings will not be available and vice versa. This is because the device only 379 allows to read either acceleration and gyroscope data or delta velocity and 380 delta angle data at a time and switching between these two burst data selection 381 modes is time consuming. 382 383 Usage examples 384 -------------- 385 386 Set device trigger in current_trigger, if not already set: 387 388 .. code-block:: bash 389 390 root:/sys/bus/iio/devices/iio:device0> cat trigger/current_trigger 391 392 root:/sys/bus/iio/devices/iio:device0> echo adis16545-1-dev0 > trigger/current_trigger 393 root:/sys/bus/iio/devices/iio:device0> cat trigger/current_trigger 394 adis16545-1-dev0 395 396 Select channels for buffer read: 397 398 .. code-block:: bash 399 400 root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_deltavelocity_x_en 401 root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_deltavelocity_y_en 402 root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_deltavelocity_z_en 403 root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_temp0_en 404 405 Set the number of samples to be stored in the buffer: 406 407 .. code-block:: bash 408 409 root:/sys/bus/iio/devices/iio:device0> echo 10 > buffer/length 410 411 Enable buffer readings: 412 413 .. code-block:: bash 414 415 root:/sys/bus/iio/devices/iio:device0> echo 1 > buffer/enable 416 417 Obtain buffered data:: 418 419 root:/sys/bus/iio/devices/iio:device0> hexdump -C /dev/iio\:device0 420 ... 421 00006aa0 09 62 00 00 ff ff fc a4 00 00 01 69 00 03 3c 08 |.b.........i..<.| 422 00006ab0 09 61 00 00 00 00 02 96 00 00 02 8f 00 03 37 50 |.a............7P| 423 00006ac0 09 61 00 00 00 00 12 3d 00 00 0b 89 00 03 2c 0b |.a.....=......,.| 424 00006ad0 09 61 00 00 00 00 1e dc 00 00 16 dd 00 03 25 bf |.a............%.| 425 00006ae0 09 61 00 00 00 00 1e e3 00 00 1b bf 00 03 27 0b |.a............'.| 426 00006af0 09 61 00 00 00 00 15 50 00 00 19 44 00 03 30 fd |.a.....P...D..0.| 427 00006b00 09 61 00 00 00 00 09 0e 00 00 14 41 00 03 3d 7f |.a.........A..=.| 428 00006b10 09 61 00 00 ff ff ff f0 00 00 0e bc 00 03 48 d0 |.a............H.| 429 00006b20 09 63 00 00 00 00 00 9f 00 00 0f 37 00 03 4c fe |.c.........7..L.| 430 00006b30 09 64 00 00 00 00 0b f6 00 00 18 92 00 03 43 22 |.d............C"| 431 00006b40 09 64 00 00 00 00 18 df 00 00 22 33 00 03 33 ab |.d........"3..3.| 432 00006b50 09 63 00 00 00 00 1e 81 00 00 26 be 00 03 29 60 |.c........&...)`| 433 00006b60 09 63 00 00 00 00 1b 13 00 00 22 2f 00 03 23 91 |.c........"/..#.| 434 ... 435 436 See ``Documentation/iio/iio_devbuf.rst`` for more information about how buffered 437 data is structured. 438 439 4. IIO Interfacing Tools 440 ======================== 441 442 See ``Documentation/iio/iio_tools.rst`` for the description of the available IIO 443 interfacing tools.
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.