1 .. SPDX-License-Identifier: GPL-2.0 2 3 =================================== 4 Kernel driver for Spreadtrum SC27XX 5 =================================== 6 7 /sys/class/leds/<led>/hw_pattern 8 -------------------------------- 9 10 Specify a hardware pattern for the SC27XX LED. For the SC27XX 11 LED controller, it only supports 4 stages to make a single 12 hardware pattern, which is used to configure the rise time, 13 high time, fall time and low time for the breathing mode. 14 15 For the breathing mode, the SC27XX LED only expects one brightness 16 for the high stage. To be compatible with the hardware pattern 17 format, we should set brightness as 0 for rise stage, fall 18 stage and low stage. 19 20 - Min stage duration: 125 ms 21 - Max stage duration: 31875 ms 22 23 Since the stage duration step is 125 ms, the duration should be 24 a multiplier of 125, like 125ms, 250ms, 375ms, 500ms ... 31875ms. 25 26 Thus the format of the hardware pattern values should be: 27 "0 rise_duration brightness high_duration 0 fall_duration 0 low_duration".
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.