1 .. SPDX-License-Identifier: GPL-2.0+ 2 3 ========================================================== 4 Linux Base Driver for Intel(R) Ethernet Network Connection 5 ========================================================== 6 7 Intel Gigabit Linux driver. 8 Copyright(c) 1999-2018 Intel Corporation. 9 10 Contents 11 ======== 12 13 - Identifying Your Adapter 14 - Command Line Parameters 15 - Additional Configurations 16 - Support 17 18 19 Identifying Your Adapter 20 ======================== 21 For information on how to identify your adapter, and for the latest Intel 22 network drivers, refer to the Intel Support website: 23 https://www.intel.com/support 24 25 26 Command Line Parameters 27 ======================== 28 If the driver is built as a module, the following optional parameters are used 29 by entering them on the command line with the modprobe command using this 30 syntax:: 31 32 modprobe igb [<option>=<VAL1>,<VAL2>,...] 33 34 There needs to be a <VAL#> for each network port in the system supported by 35 this driver. The values will be applied to each instance, in function order. 36 For example:: 37 38 modprobe igb max_vfs=2,4 39 40 In this case, there are two network ports supported by igb in the system. 41 42 NOTE: A descriptor describes a data buffer and attributes related to the data 43 buffer. This information is accessed by the hardware. 44 45 max_vfs 46 ------- 47 :Valid Range: 0-7 48 49 This parameter adds support for SR-IOV. It causes the driver to spawn up to 50 max_vfs worth of virtual functions. If the value is greater than 0 it will 51 also force the VMDq parameter to be 1 or more. 52 53 The parameters for the driver are referenced by position. Thus, if you have a 54 dual port adapter, or more than one adapter in your system, and want N virtual 55 functions per port, you must specify a number for each port with each parameter 56 separated by a comma. For example:: 57 58 modprobe igb max_vfs=4 59 60 This will spawn 4 VFs on the first port. 61 62 :: 63 64 modprobe igb max_vfs=2,4 65 66 This will spawn 2 VFs on the first port and 4 VFs on the second port. 67 68 NOTE: Caution must be used in loading the driver with these parameters. 69 Depending on your system configuration, number of slots, etc., it is impossible 70 to predict in all cases where the positions would be on the command line. 71 72 NOTE: Neither the device nor the driver control how VFs are mapped into config 73 space. Bus layout will vary by operating system. On operating systems that 74 support it, you can check sysfs to find the mapping. 75 76 NOTE: When either SR-IOV mode or VMDq mode is enabled, hardware VLAN filtering 77 and VLAN tag stripping/insertion will remain enabled. Please remove the old 78 VLAN filter before the new VLAN filter is added. For example:: 79 80 ip link set eth0 vf 0 vlan 100 // set vlan 100 for VF 0 81 ip link set eth0 vf 0 vlan 0 // Delete vlan 100 82 ip link set eth0 vf 0 vlan 200 // set a new vlan 200 for VF 0 83 84 Debug 85 ----- 86 :Valid Range: 0-16 (0=none,...,16=all) 87 :Default Value: 0 88 89 This parameter adjusts the level debug messages displayed in the system logs. 90 91 92 Additional Features and Configurations 93 ====================================== 94 95 Jumbo Frames 96 ------------ 97 Jumbo Frames support is enabled by changing the Maximum Transmission Unit (MTU) 98 to a value larger than the default value of 1500. 99 100 Use the ifconfig command to increase the MTU size. For example, enter the 101 following where <x> is the interface number:: 102 103 ifconfig eth<x> mtu 9000 up 104 105 Alternatively, you can use the ip command as follows:: 106 107 ip link set mtu 9000 dev eth<x> 108 ip link set up dev eth<x> 109 110 This setting is not saved across reboots. The setting change can be made 111 permanent by adding 'MTU=9000' to the file: 112 113 - For RHEL: /etc/sysconfig/network-scripts/ifcfg-eth<x> 114 - For SLES: /etc/sysconfig/network/<config_file> 115 116 NOTE: The maximum MTU setting for Jumbo Frames is 9216. This value coincides 117 with the maximum Jumbo Frames size of 9234 bytes. 118 119 NOTE: Using Jumbo frames at 10 or 100 Mbps is not supported and may result in 120 poor performance or loss of link. 121 122 123 ethtool 124 ------- 125 The driver utilizes the ethtool interface for driver configuration and 126 diagnostics, as well as displaying statistical information. The latest ethtool 127 version is required for this functionality. Download it at: 128 129 https://www.kernel.org/pub/software/network/ethtool/ 130 131 132 Enabling Wake on LAN (WoL) 133 -------------------------- 134 WoL is configured through the ethtool utility. 135 136 WoL will be enabled on the system during the next shut down or reboot. For 137 this driver version, in order to enable WoL, the igb driver must be loaded 138 prior to shutting down or suspending the system. 139 140 NOTE: Wake on LAN is only supported on port A of multi-port devices. Also 141 Wake On LAN is not supported for the following device: 142 - Intel(R) Gigabit VT Quad Port Server Adapter 143 144 145 Multiqueue 146 ---------- 147 In this mode, a separate MSI-X vector is allocated for each queue and one for 148 "other" interrupts such as link status change and errors. All interrupts are 149 throttled via interrupt moderation. Interrupt moderation must be used to avoid 150 interrupt storms while the driver is processing one interrupt. The moderation 151 value should be at least as large as the expected time for the driver to 152 process an interrupt. Multiqueue is off by default. 153 154 REQUIREMENTS: MSI-X support is required for Multiqueue. If MSI-X is not found, 155 the system will fallback to MSI or to Legacy interrupts. This driver supports 156 receive multiqueue on all kernels that support MSI-X. 157 158 NOTE: On some kernels a reboot is required to switch between single queue mode 159 and multiqueue mode or vice-versa. 160 161 162 MAC and VLAN anti-spoofing feature 163 ---------------------------------- 164 When a malicious driver attempts to send a spoofed packet, it is dropped by the 165 hardware and not transmitted. 166 167 An interrupt is sent to the PF driver notifying it of the spoof attempt. When a 168 spoofed packet is detected, the PF driver will send the following message to 169 the system log (displayed by the "dmesg" command): 170 Spoof event(s) detected on VF(n), where n = the VF that attempted to do the 171 spoofing 172 173 174 Setting MAC Address, VLAN and Rate Limit Using IProute2 Tool 175 ------------------------------------------------------------ 176 You can set a MAC address of a Virtual Function (VF), a default VLAN and the 177 rate limit using the IProute2 tool. Download the latest version of the 178 IProute2 tool from Sourceforge if your version does not have all the features 179 you require. 180 181 Credit Based Shaper (Qav Mode) 182 ------------------------------ 183 When enabling the CBS qdisc in the hardware offload mode, traffic shaping using 184 the CBS (described in the IEEE 802.1Q-2018 Section 8.6.8.2 and discussed in the 185 Annex L) algorithm will run in the i210 controller, so it's more accurate and 186 uses less CPU. 187 188 When using offloaded CBS, and the traffic rate obeys the configured rate 189 (doesn't go above it), CBS should have little to no effect in the latency. 190 191 The offloaded version of the algorithm has some limits, caused by how the idle 192 slope is expressed in the adapter's registers. It can only represent idle slopes 193 in 16.38431 kbps units, which means that if a idle slope of 2576kbps is 194 requested, the controller will be configured to use a idle slope of ~2589 kbps, 195 because the driver rounds the value up. For more details, see the comments on 196 :c:func:`igb_config_tx_modes()`. 197 198 NOTE: This feature is exclusive to i210 models. 199 200 201 Support 202 ======= 203 For general information, go to the Intel support website at: 204 https://www.intel.com/support/ 205 206 If an issue is identified with the released source code on a supported kernel 207 with a supported adapter, email the specific information related to the issue 208 to intel-wired-lan@lists.osuosl.org.
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.