1 =================== 2 Tracepoints in ALSA 3 =================== 4 5 2017/07/02 6 Takasahi Sakamoto 7 8 Tracepoints in ALSA PCM core 9 ============================ 10 11 ALSA PCM core registers ``snd_pcm`` subsystem to kernel tracepoint system. 12 This subsystem includes two categories of tracepoints; for state of PCM buffer 13 and for processing of PCM hardware parameters. These tracepoints are available 14 when corresponding kernel configurations are enabled. When ``CONFIG_SND_DEBUG`` 15 is enabled, the latter tracepoints are available. When additional 16 ``SND_PCM_XRUN_DEBUG`` is enabled too, the former trace points are enabled. 17 18 Tracepoints for state of PCM buffer 19 ------------------------------------ 20 21 This category includes four tracepoints; ``hwptr``, ``applptr``, ``xrun`` and 22 ``hw_ptr_error``. 23 24 Tracepoints for processing of PCM hardware parameters 25 ----------------------------------------------------- 26 27 This category includes two tracepoints; ``hw_mask_param`` and 28 ``hw_interval_param``. 29 30 In a design of ALSA PCM core, data transmission is abstracted as PCM substream. 31 Applications manage PCM substream to maintain data transmission for PCM frames. 32 Before starting the data transmission, applications need to configure PCM 33 substream. In this procedure, PCM hardware parameters are decided by 34 interaction between applications and ALSA PCM core. Once decided, runtime of 35 the PCM substream keeps the parameters. 36 37 The parameters are described in struct snd_pcm_hw_params. This 38 structure includes several types of parameters. Applications set preferable 39 value to these parameters, then execute ioctl(2) with SNDRV_PCM_IOCTL_HW_REFINE 40 or SNDRV_PCM_IOCTL_HW_PARAMS. The former is used just for refining available 41 set of parameters. The latter is used for an actual decision of the parameters. 42 43 The struct snd_pcm_hw_params structure has below members: 44 45 ``flags`` 46 Configurable. ALSA PCM core and some drivers handle this flag to select 47 convenient parameters or change their behaviour. 48 ``masks`` 49 Configurable. This type of parameter is described in 50 struct snd_mask and represent mask values. As of PCM protocol 51 v2.0.13, three types are defined. 52 53 - SNDRV_PCM_HW_PARAM_ACCESS 54 - SNDRV_PCM_HW_PARAM_FORMAT 55 - SNDRV_PCM_HW_PARAM_SUBFORMAT 56 ``intervals`` 57 Configurable. This type of parameter is described in 58 struct snd_interval and represent values with a range. As of 59 PCM protocol v2.0.13, twelve types are defined. 60 61 - SNDRV_PCM_HW_PARAM_SAMPLE_BITS 62 - SNDRV_PCM_HW_PARAM_FRAME_BITS 63 - SNDRV_PCM_HW_PARAM_CHANNELS 64 - SNDRV_PCM_HW_PARAM_RATE 65 - SNDRV_PCM_HW_PARAM_PERIOD_TIME 66 - SNDRV_PCM_HW_PARAM_PERIOD_SIZE 67 - SNDRV_PCM_HW_PARAM_PERIOD_BYTES 68 - SNDRV_PCM_HW_PARAM_PERIODS 69 - SNDRV_PCM_HW_PARAM_BUFFER_TIME 70 - SNDRV_PCM_HW_PARAM_BUFFER_SIZE 71 - SNDRV_PCM_HW_PARAM_BUFFER_BYTES 72 - SNDRV_PCM_HW_PARAM_TICK_TIME 73 ``rmask`` 74 Configurable. This is evaluated at ioctl(2) with 75 SNDRV_PCM_IOCTL_HW_REFINE only. Applications can select which 76 mask/interval parameter can be changed by ALSA PCM core. For 77 SNDRV_PCM_IOCTL_HW_PARAMS, this mask is ignored and all of parameters 78 are going to be changed. 79 ``cmask`` 80 Read-only. After returning from ioctl(2), buffer in user space for 81 struct snd_pcm_hw_params includes result of each operation. 82 This mask represents which mask/interval parameter is actually changed. 83 ``info`` 84 Read-only. This represents hardware/driver capabilities as bit flags 85 with SNDRV_PCM_INFO_XXX. Typically, applications execute ioctl(2) with 86 SNDRV_PCM_IOCTL_HW_REFINE to retrieve this flag, then decide candidates 87 of parameters and execute ioctl(2) with SNDRV_PCM_IOCTL_HW_PARAMS to 88 configure PCM substream. 89 ``msbits`` 90 Read-only. This value represents available bit width in MSB side of 91 a PCM sample. When a parameter of SNDRV_PCM_HW_PARAM_SAMPLE_BITS was 92 decided as a fixed number, this value is also calculated according to 93 it. Else, zero. But this behaviour depends on implementations in driver 94 side. 95 ``rate_num`` 96 Read-only. This value represents numerator of sampling rate in fraction 97 notation. Basically, when a parameter of SNDRV_PCM_HW_PARAM_RATE was 98 decided as a single value, this value is also calculated according to 99 it. Else, zero. But this behaviour depends on implementations in driver 100 side. 101 ``rate_den`` 102 Read-only. This value represents denominator of sampling rate in 103 fraction notation. Basically, when a parameter of 104 SNDRV_PCM_HW_PARAM_RATE was decided as a single value, this value is 105 also calculated according to it. Else, zero. But this behaviour depends 106 on implementations in driver side. 107 ``fifo_size`` 108 Read-only. This value represents the size of FIFO in serial sound 109 interface of hardware. Basically, each driver can assigns a proper 110 value to this parameter but some drivers intentionally set zero with 111 a care of hardware design or data transmission protocol. 112 113 ALSA PCM core handles buffer of struct snd_pcm_hw_params when 114 applications execute ioctl(2) with SNDRV_PCM_HW_REFINE or SNDRV_PCM_HW_PARAMS. 115 Parameters in the buffer are changed according to 116 struct snd_pcm_hardware and rules of constraints in the runtime. The 117 structure describes capabilities of handled hardware. The rules describes 118 dependencies on which a parameter is decided according to several parameters. 119 A rule has a callback function, and drivers can register arbitrary functions 120 to compute the target parameter. ALSA PCM core registers some rules to the 121 runtime as a default. 122 123 Each driver can join in the interaction as long as it prepared for two stuffs 124 in a callback of struct snd_pcm_ops.open. 125 126 1. In the callback, drivers are expected to change a member of 127 struct snd_pcm_hardware type in the runtime, according to 128 capacities of corresponding hardware. 129 2. In the same callback, drivers are also expected to register additional rules 130 of constraints into the runtime when several parameters have dependencies 131 due to hardware design. 132 133 The driver can refers to result of the interaction in a callback of 134 struct snd_pcm_ops.hw_params, however it should not change the 135 content. 136 137 Tracepoints in this category are designed to trace changes of the 138 mask/interval parameters. When ALSA PCM core changes them, ``hw_mask_param`` or 139 ``hw_interval_param`` event is probed according to type of the changed parameter. 140 141 ALSA PCM core also has a pretty print format for each of the tracepoints. Below 142 is an example for ``hw_mask_param``. 143 144 :: 145 146 hw_mask_param: pcmC0D0p 001/023 FORMAT 00000000000000000000001000000044 00000000000000000000001000000044 147 148 149 Below is an example for ``hw_interval_param``. 150 151 :: 152 153 hw_interval_param: pcmC0D0p 000/023 BUFFER_SIZE 0 0 [0 4294967295] 0 1 [0 4294967295] 154 155 The first three fields are common. They represent name of ALSA PCM character 156 device, rules of constraint and name of the changed parameter, in order. The 157 field for rules of constraint consists of two sub-fields; index of applied rule 158 and total number of rules added to the runtime. As an exception, the index 000 159 means that the parameter is changed by ALSA PCM core, regardless of the rules. 160 161 The rest of field represent state of the parameter before/after changing. These 162 fields are different according to type of the parameter. For parameters of mask 163 type, the fields represent hexadecimal dump of content of the parameter. For 164 parameters of interval type, the fields represent values of each member of 165 ``empty``, ``integer``, ``openmin``, ``min``, ``max``, ``openmax`` in 166 struct snd_interval in this order. 167 168 Tracepoints in drivers 169 ====================== 170 171 Some drivers have tracepoints for developers' convenience. For them, please 172 refer to each documentation or implementation.
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.