1 /*
2 * BSD LICENSE
3 *
4 * Copyright(c) 2016 Broadcom. All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 *
10 * * Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * * Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in
14 * the documentation and/or other materials provided with the
15 * distribution.
16 * * Neither the name of Broadcom Corporation nor the names of its
17 * contributors may be used to endorse or promote products derived
18 * from this software without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33 /dts-v1/;
34
35 #include "bcm-nsp.dtsi"
36 #include <dt-bindings/gpio/gpio.h>
37
38 / {
39 model = "NorthStar Plus SVK (BCM958622HR)";
40 compatible = "brcm,bcm958622hr", "brcm,bcm58622", "brcm,nsp";
41
42 chosen {
43 stdout-path = "serial0:115200n8";
44 };
45
46 memory@60000000 {
47 device_type = "memory";
48 reg = <0x60000000 0x80000000>;
49 };
50
51 gpio-restart {
52 compatible = "gpio-restart";
53 gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
54 open-source;
55 priority = <200>;
56 };
57 };
58
59 /* USB 3 and SLIC support needed to be complete */
60
61 &dma {
62 status = "okay";
63 };
64
65 &amac0 {
66 status = "okay";
67 };
68
69 &amac1 {
70 status = "okay";
71 };
72
73 &amac2 {
74 status = "okay";
75 };
76
77 &ehci0 {
78 status = "okay";
79 };
80
81 &nand_controller {
82 nand@0 {
83 compatible = "brcm,nandcs";
84 reg = <0>;
85 nand-on-flash-bbt;
86
87 #address-cells = <1>;
88 #size-cells = <1>;
89
90 nand-ecc-strength = <24>;
91 nand-ecc-step-size = <1024>;
92
93 brcm,nand-oob-sector-size = <27>;
94
95 partition@0 {
96 label = "nboot";
97 reg = <0x00000000 0x00200000>;
98 read-only;
99 };
100 partition@200000 {
101 label = "nenv";
102 reg = <0x00200000 0x00400000>;
103 };
104 partition@600000 {
105 label = "nsystem";
106 reg = <0x00600000 0x00a00000>;
107 };
108 partition@1000000 {
109 label = "nrootfs";
110 reg = <0x01000000 0x03000000>;
111 };
112 partition@4000000 {
113 label = "ncustfs";
114 reg = <0x04000000 0x3c000000>;
115 };
116 };
117 };
118
119 &ohci0 {
120 status = "okay";
121 };
122
123 &pcie0 {
124 status = "okay";
125 };
126
127 &pcie1 {
128 status = "okay";
129 };
130
131 &pinctrl {
132 pinctrl-names = "default";
133 pinctrl-0 = <&nand_sel>;
134 nand_sel: nand_sel {
135 function = "nand";
136 groups = "nand_grp";
137 };
138 };
139
140 &qspi {
141 status = "okay";
142 bspi-sel = <0>;
143 flash: flash@0 {
144 #address-cells = <1>;
145 #size-cells = <1>;
146 compatible = "m25p80";
147 reg = <0x0>;
148 spi-max-frequency = <12500000>;
149 m25p,fast-read;
150 spi-cpol;
151 spi-cpha;
152
153 partition@0 {
154 label = "boot";
155 reg = <0x00000000 0x000a0000>;
156 };
157
158 partition@a0000 {
159 label = "env";
160 reg = <0x000a0000 0x00060000>;
161 };
162
163 partition@100000 {
164 label = "system";
165 reg = <0x00100000 0x00600000>;
166 };
167
168 partition@700000 {
169 label = "rootfs";
170 reg = <0x00700000 0x01900000>;
171 };
172 };
173 };
174
175 &srab {
176 compatible = "brcm,bcm58622-srab", "brcm,nsp-srab";
177 status = "okay";
178
179 ports {
180 port@0 {
181 label = "port0";
182 reg = <0>;
183 };
184
185 port@1 {
186 label = "port1";
187 reg = <1>;
188 };
189
190 port@2 {
191 label = "port2";
192 reg = <2>;
193 };
194
195 port@3 {
196 label = "port3";
197 reg = <3>;
198 };
199
200 port@4 {
201 label = "port4";
202 reg = <4>;
203 };
204
205 port@8 {
206 ethernet = <&amac2>;
207 label = "cpu";
208 reg = <8>;
209 fixed-link {
210 speed = <1000>;
211 full-duplex;
212 };
213 };
214 };
215 };
216
217 &uart0 {
218 status = "okay";
219 };
220
221 &usb3_phy {
222 status = "okay";
223 };
224
225 &xhci {
226 status = "okay";
227 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.