1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
3
4 #include "kirkwood.dtsi"
5 #include "kirkwood-6281.dtsi"
6
7 / {
8 model = "Globalscale Technologies Guruplug Server Plus";
9 compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
10
11 memory {
12 device_type = "memory";
13 reg = <0x00000000 0x20000000>;
14 };
15
16 chosen {
17 bootargs = "console=ttyS0,115200n8 earlyprintk";
18 stdout-path = &uart0;
19 };
20
21 ocp@f1000000 {
22 pinctrl: pin-controller@10000 {
23 pmx_led_health_r: pmx-led-health-r {
24 marvell,pins = "mpp46";
25 marvell,function = "gpio";
26 };
27 pmx_led_health_g: pmx-led-health-g {
28 marvell,pins = "mpp47";
29 marvell,function = "gpio";
30 };
31 pmx_led_wmode_r: pmx-led-wmode-r {
32 marvell,pins = "mpp48";
33 marvell,function = "gpio";
34 };
35 pmx_led_wmode_g: pmx-led-wmode-g {
36 marvell,pins = "mpp49";
37 marvell,function = "gpio";
38 };
39 };
40 serial@12000 {
41 status = "okay";
42 };
43
44 sata@80000 {
45 status = "okay";
46 nr-ports = <1>;
47 };
48
49 /* AzureWave AW-GH381 WiFi/BT */
50 mvsdio@90000 {
51 status = "okay";
52 non-removable;
53 };
54 };
55
56 gpio-leds {
57 compatible = "gpio-leds";
58 pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g
59 &pmx_led_wmode_r &pmx_led_wmode_g >;
60 pinctrl-names = "default";
61
62 led-health-r {
63 label = "guruplug:red:health";
64 gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
65 };
66 led-health-g {
67 label = "guruplug:green:health";
68 gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
69 };
70 led-wmode-r {
71 label = "guruplug:red:wmode";
72 gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
73 };
74 led-wmode-g {
75 label = "guruplug:green:wmode";
76 gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
77 };
78 };
79 };
80
81 &nand {
82 status = "okay";
83
84 partition@0 {
85 label = "u-boot";
86 reg = <0x00000000 0x00100000>;
87 read-only;
88 };
89
90 partition@100000 {
91 label = "uImage";
92 reg = <0x00100000 0x00400000>;
93 };
94
95 partition@500000 {
96 label = "data";
97 reg = <0x00500000 0x1fb00000>;
98 };
99 };
100
101 &mdio {
102 status = "okay";
103
104 ethphy0: ethernet-phy@0 {
105 /* Marvell 88E1121R */
106 compatible = "ethernet-phy-id0141.0cb0",
107 "ethernet-phy-ieee802.3-c22";
108 reg = <0>;
109 };
110
111 ethphy1: ethernet-phy@1 {
112 /* Marvell 88E1121R */
113 compatible = "ethernet-phy-id0141.0cb0",
114 "ethernet-phy-ieee802.3-c22";
115 reg = <1>;
116 };
117 };
118
119 ð0 {
120 status = "okay";
121 ethernet0-port@0 {
122 phy-handle = <ðphy0>;
123 phy-connection-type = "rgmii-id";
124 };
125 };
126
127 ð1 {
128 status = "okay";
129 ethernet1-port@0 {
130 phy-handle = <ðphy1>;
131 phy-connection-type = "rgmii-id";
132 };
133 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.