~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/arch/arm/boot/dts/microchip/sama7g5.dtsi

Version: ~ [ linux-6.12-rc7 ] ~ [ linux-6.11.7 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.60 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.116 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.171 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.229 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.285 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.323 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.12 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  2 /*
  3  *  sama7g5.dtsi - Device Tree Include file for SAMA7G5 family SoC
  4  *
  5  *  Copyright (C) 2020 Microchip Technology, Inc. and its subsidiaries
  6  *
  7  *  Author: Eugen Hristev <eugen.hristev@microchip.com>
  8  *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
  9  *
 10  */
 11 
 12 #include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
 13 #include <dt-bindings/interrupt-controller/irq.h>
 14 #include <dt-bindings/interrupt-controller/arm-gic.h>
 15 #include <dt-bindings/clock/at91.h>
 16 #include <dt-bindings/dma/at91.h>
 17 #include <dt-bindings/gpio/gpio.h>
 18 #include <dt-bindings/mfd/at91-usart.h>
 19 #include <dt-bindings/nvmem/microchip,sama7g5-otpc.h>
 20 #include <dt-bindings/thermal/thermal.h>
 21 
 22 / {
 23         model = "Microchip SAMA7G5 family SoC";
 24         compatible = "microchip,sama7g5";
 25         #address-cells = <1>;
 26         #size-cells = <1>;
 27         interrupt-parent = <&gic>;
 28 
 29         cpus {
 30                 #address-cells = <1>;
 31                 #size-cells = <0>;
 32 
 33                 cpu0: cpu@0 {
 34                         device_type = "cpu";
 35                         compatible = "arm,cortex-a7";
 36                         reg = <0x0>;
 37                         clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>;
 38                         clock-names = "cpu";
 39                         operating-points-v2 = <&cpu_opp_table>;
 40                         #cooling-cells = <2>; /* min followed by max */
 41                 };
 42         };
 43 
 44         cpu_opp_table: opp-table {
 45                 compatible = "operating-points-v2";
 46 
 47                 opp-90000000 {
 48                         opp-hz = /bits/ 64 <90000000>;
 49                         opp-microvolt = <1050000 1050000 1225000>;
 50                         clock-latency-ns = <320000>;
 51                 };
 52 
 53                 opp-250000000 {
 54                         opp-hz = /bits/ 64 <250000000>;
 55                         opp-microvolt = <1050000 1050000 1225000>;
 56                         clock-latency-ns = <320000>;
 57                 };
 58 
 59                 opp-600000000 {
 60                         opp-hz = /bits/ 64 <600000000>;
 61                         opp-microvolt = <1050000 1050000 1225000>;
 62                         clock-latency-ns = <320000>;
 63                         opp-suspend;
 64                 };
 65 
 66                 opp-800000000 {
 67                         opp-hz = /bits/ 64 <800000000>;
 68                         opp-microvolt = <1150000 1125000 1225000>;
 69                         clock-latency-ns = <320000>;
 70                 };
 71 
 72                 opp-1000000002 {
 73                         opp-hz = /bits/ 64 <1000000002>;
 74                         opp-microvolt = <1250000 1225000 1300000>;
 75                         clock-latency-ns = <320000>;
 76                 };
 77         };
 78 
 79         thermal-zones {
 80                 cpu_thermal: cpu-thermal {
 81                         polling-delay-passive = <1000>;
 82                         polling-delay = <5000>;
 83                         thermal-sensors = <&thermal_sensor>;
 84 
 85                         trips {
 86                                 cpu_normal: cpu-alert0 {
 87                                         temperature = <90000>;
 88                                         hysteresis = <0>;
 89                                         type = "passive";
 90                                 };
 91 
 92                                 cpu_hot: cpu-alert1 {
 93                                         temperature = <95000>;
 94                                         hysteresis = <0>;
 95                                         type = "passive";
 96                                 };
 97 
 98                                 cpu_critical: cpu-critical {
 99                                         temperature = <100000>;
100                                         hysteresis = <0>;
101                                         type = "critical";
102                                 };
103                         };
104 
105                         cooling-maps {
106                                 map0 {
107                                         trip = <&cpu_normal>;
108                                         cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
109                                 };
110 
111                                 map1 {
112                                         trip = <&cpu_hot>;
113                                         cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
114                                 };
115                         };
116                 };
117         };
118 
119         clocks {
120                 slow_xtal: slow_xtal {
121                         compatible = "fixed-clock";
122                         #clock-cells = <0>;
123                 };
124 
125                 main_xtal: main_xtal {
126                         compatible = "fixed-clock";
127                         #clock-cells = <0>;
128                 };
129 
130                 usb_clk: usb_clk {
131                         compatible = "fixed-clock";
132                         #clock-cells = <0>;
133                         clock-frequency = <48000000>;
134                 };
135         };
136 
137         vddout25: fixed-regulator-vddout25 {
138                 compatible = "regulator-fixed";
139 
140                 regulator-name = "VDDOUT25";
141                 regulator-min-microvolt = <2500000>;
142                 regulator-max-microvolt = <2500000>;
143                 regulator-boot-on;
144                 status = "disabled";
145         };
146 
147         ns_sram: sram@100000 {
148                 compatible = "mmio-sram";
149                 #address-cells = <1>;
150                 #size-cells = <1>;
151                 reg = <0x100000 0x20000>;
152                 ranges;
153         };
154 
155         thermal_sensor: thermal-sensor {
156                 compatible = "generic-adc-thermal";
157                 #thermal-sensor-cells = <0>;
158                 io-channels = <&adc AT91_SAMA7G5_ADC_TEMP_CHANNEL>;
159                 io-channel-names = "sensor-channel";
160         };
161 
162         soc {
163                 compatible = "simple-bus";
164                 #address-cells = <1>;
165                 #size-cells = <1>;
166                 ranges;
167 
168                 nfc_sram: sram@600000 {
169                         compatible = "mmio-sram";
170                         no-memory-wc;
171                         reg = <0x00600000 0x2400>;
172                         #address-cells = <1>;
173                         #size-cells = <1>;
174                         ranges = <0 0x00600000 0x2400>;
175                 };
176 
177                 nfc_io: nfc-io@10000000 {
178                         compatible = "atmel,sama5d3-nfc-io", "syscon";
179                         reg = <0x10000000 0x8000000>;
180                 };
181 
182                 ebi: ebi@40000000 {
183                         compatible = "atmel,sama5d3-ebi";
184                         #address-cells = <2>;
185                         #size-cells = <1>;
186                         atmel,smc = <&hsmc>;
187                         reg = <0x40000000 0x20000000>;
188                         ranges = <0x0 0x0 0x40000000 0x8000000
189                                   0x1 0x0 0x48000000 0x8000000
190                                   0x2 0x0 0x50000000 0x8000000
191                                   0x3 0x0 0x58000000 0x8000000>;
192                         clocks = <&pmc PMC_TYPE_CORE PMC_MCK1>;
193                         status = "disabled";
194 
195                         nand_controller: nand-controller {
196                                 compatible = "atmel,sama5d3-nand-controller";
197                                 atmel,nfc-sram = <&nfc_sram>;
198                                 atmel,nfc-io = <&nfc_io>;
199                                 ecc-engine = <&pmecc>;
200                                 #address-cells = <2>;
201                                 #size-cells = <1>;
202                                 ranges;
203                                 status = "disabled";
204                         };
205                 };
206 
207                 securam: sram@e0000000 {
208                         compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram";
209                         reg = <0xe0000000 0x4000>;
210                         clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
211                         #address-cells = <1>;
212                         #size-cells = <1>;
213                         ranges = <0 0xe0000000 0x4000>;
214                         no-memory-wc;
215                 };
216 
217                 secumod: secumod@e0004000 {
218                         compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon";
219                         reg = <0xe0004000 0x4000>;
220                         gpio-controller;
221                         #gpio-cells = <2>;
222                 };
223 
224                 sfrbu: sfr@e0008000 {
225                         compatible = "microchip,sama7g5-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
226                         reg = <0xe0008000 0x20>;
227                 };
228 
229                 pioA: pinctrl@e0014000 {
230                         compatible = "microchip,sama7g5-pinctrl";
231                         reg = <0xe0014000 0x800>;
232                         interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
233                                 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
234                                 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
235                                 <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
236                                 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
237                         interrupt-controller;
238                         #interrupt-cells = <2>;
239                         gpio-controller;
240                         #gpio-cells = <2>;
241                         clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
242                 };
243 
244                 pmc: clock-controller@e0018000 {
245                         compatible = "microchip,sama7g5-pmc", "syscon";
246                         reg = <0xe0018000 0x200>;
247                         interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
248                         #clock-cells = <2>;
249                         clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
250                         clock-names = "td_slck", "md_slck", "main_xtal";
251                 };
252 
253                 reset_controller: reset-controller@e001d000 {
254                         compatible = "microchip,sama7g5-rstc";
255                         reg = <0xe001d000 0xc>, <0xe001d0e4 0x4>;
256                         #reset-cells = <1>;
257                         clocks = <&clk32k 0>;
258                 };
259 
260                 shdwc: poweroff@e001d010 {
261                         compatible = "microchip,sama7g5-shdwc", "syscon";
262                         reg = <0xe001d010 0x10>;
263                         clocks = <&clk32k 0>;
264                         #address-cells = <1>;
265                         #size-cells = <0>;
266                         atmel,wakeup-rtc-timer;
267                         atmel,wakeup-rtt-timer;
268                         status = "disabled";
269                 };
270 
271                 rtt: rtc@e001d020 {
272                         compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
273                         reg = <0xe001d020 0x30>;
274                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
275                         clocks = <&clk32k 1>;
276                 };
277 
278                 clk32k: clock-controller@e001d050 {
279                         compatible = "microchip,sama7g5-sckc", "microchip,sam9x60-sckc";
280                         reg = <0xe001d050 0x4>;
281                         clocks = <&slow_xtal>;
282                         #clock-cells = <1>;
283                 };
284 
285                 gpbr: gpbr@e001d060 {
286                         compatible = "microchip,sama7g5-gpbr", "syscon";
287                         reg = <0xe001d060 0x48>;
288                 };
289 
290                 rtc: rtc@e001d0a8 {
291                         compatible = "microchip,sama7g5-rtc", "microchip,sam9x60-rtc";
292                         reg = <0xe001d0a8 0x30>;
293                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
294                         clocks = <&clk32k 1>;
295                 };
296 
297                 ps_wdt: watchdog@e001d180 {
298                         compatible = "microchip,sama7g5-wdt";
299                         reg = <0xe001d180 0x24>;
300                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
301                         clocks = <&clk32k 0>;
302                 };
303 
304                 chipid@e0020000 {
305                         compatible = "microchip,sama7g5-chipid";
306                         reg = <0xe0020000 0x8>;
307                 };
308 
309                 tcb1: timer@e0800000 {
310                         compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
311                         #address-cells = <1>;
312                         #size-cells = <0>;
313                         reg = <0xe0800000 0x100>;
314                         interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
315                         clocks = <&pmc PMC_TYPE_PERIPHERAL 91>, <&pmc PMC_TYPE_PERIPHERAL 92>, <&pmc PMC_TYPE_PERIPHERAL 93>, <&clk32k 1>;
316                         clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
317                 };
318 
319                 hsmc: hsmc@e0808000 {
320                         compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
321                         reg = <0xe0808000 0x1000>;
322                         interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
323                         clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
324                         #address-cells = <1>;
325                         #size-cells = <1>;
326                         ranges;
327 
328                         pmecc: ecc-engine@e0808070 {
329                                 compatible = "atmel,sama5d2-pmecc";
330                                 reg = <0xe0808070 0x490>,
331                                       <0xe0808500 0x200>;
332                         };
333                 };
334 
335                 qspi0: spi@e080c000 {
336                         compatible = "microchip,sama7g5-ospi";
337                         reg = <0xe080c000 0x400>, <0x20000000 0x10000000>;
338                         reg-names = "qspi_base", "qspi_mmap";
339                         interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
340                         dmas = <&dma0 AT91_XDMAC_DT_PERID(41)>,
341                                <&dma0 AT91_XDMAC_DT_PERID(40)>;
342                         dma-names = "tx", "rx";
343                         clocks = <&pmc PMC_TYPE_PERIPHERAL 78>, <&pmc PMC_TYPE_GCK 78>;
344                         clock-names = "pclk", "gclk";
345                         #address-cells = <1>;
346                         #size-cells = <0>;
347                         status = "disabled";
348                 };
349 
350                 qspi1: spi@e0810000 {
351                         compatible = "microchip,sama7g5-qspi";
352                         reg = <0xe0810000 0x400>, <0x30000000 0x10000000>;
353                         reg-names = "qspi_base", "qspi_mmap";
354                         interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
355                         dmas = <&dma0 AT91_XDMAC_DT_PERID(43)>,
356                                <&dma0 AT91_XDMAC_DT_PERID(42)>;
357                         dma-names = "tx", "rx";
358                         clocks = <&pmc PMC_TYPE_PERIPHERAL 79>, <&pmc PMC_TYPE_GCK 79>;
359                         clock-names = "pclk", "gclk";
360                         #address-cells = <1>;
361                         #size-cells = <0>;
362                         status = "disabled";
363                 };
364 
365                 can0: can@e0828000 {
366                         compatible = "bosch,m_can";
367                         reg = <0xe0828000 0x100>, <0x100000 0x7800>;
368                         reg-names = "m_can", "message_ram";
369                         interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
370                                      <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
371                         interrupt-names = "int0", "int1";
372                         clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>;
373                         clock-names = "hclk", "cclk";
374                         assigned-clocks = <&pmc PMC_TYPE_GCK 61>;
375                         assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
376                         assigned-clock-rates = <40000000>;
377                         bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
378                         status = "disabled";
379                 };
380 
381                 can1: can@e082c000 {
382                         compatible = "bosch,m_can";
383                         reg = <0xe082c000 0x100>, <0x100000 0xbc00>;
384                         reg-names = "m_can", "message_ram";
385                         interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
386                                      <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
387                         interrupt-names = "int0", "int1";
388                         clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>;
389                         clock-names = "hclk", "cclk";
390                         assigned-clocks = <&pmc PMC_TYPE_GCK 62>;
391                         assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
392                         assigned-clock-rates = <40000000>;
393                         bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
394                         status = "disabled";
395                 };
396 
397                 can2: can@e0830000 {
398                         compatible = "bosch,m_can";
399                         reg = <0xe0830000 0x100>, <0x100000 0x10000>;
400                         reg-names = "m_can", "message_ram";
401                         interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
402                                      <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
403                         interrupt-names = "int0", "int1";
404                         clocks = <&pmc PMC_TYPE_PERIPHERAL 63>, <&pmc PMC_TYPE_GCK 63>;
405                         clock-names = "hclk", "cclk";
406                         assigned-clocks = <&pmc PMC_TYPE_GCK 63>;
407                         assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
408                         assigned-clock-rates = <40000000>;
409                         bosch,mram-cfg = <0xbc00 0 0 64 0 0 32 32>;
410                         status = "disabled";
411                 };
412 
413                 can3: can@e0834000 {
414                         compatible = "bosch,m_can";
415                         reg = <0xe0834000 0x100>, <0x110000 0x4400>;
416                         reg-names = "m_can", "message_ram";
417                         interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
418                                      <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
419                         interrupt-names = "int0", "int1";
420                         clocks = <&pmc PMC_TYPE_PERIPHERAL 64>, <&pmc PMC_TYPE_GCK 64>;
421                         clock-names = "hclk", "cclk";
422                         assigned-clocks = <&pmc PMC_TYPE_GCK 64>;
423                         assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
424                         assigned-clock-rates = <40000000>;
425                         bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
426                         status = "disabled";
427                 };
428 
429                 can4: can@e0838000 {
430                         compatible = "bosch,m_can";
431                         reg = <0xe0838000 0x100>, <0x110000 0x8800>;
432                         reg-names = "m_can", "message_ram";
433                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
434                                      <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
435                         interrupt-names = "int0", "int1";
436                         clocks = <&pmc PMC_TYPE_PERIPHERAL 65>, <&pmc PMC_TYPE_GCK 65>;
437                         clock-names = "hclk", "cclk";
438                         assigned-clocks = <&pmc PMC_TYPE_GCK 65>;
439                         assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
440                         assigned-clock-rates = <40000000>;
441                         bosch,mram-cfg = <0x4400 0 0 64 0 0 32 32>;
442                         status = "disabled";
443                 };
444 
445                 can5: can@e083c000 {
446                         compatible = "bosch,m_can";
447                         reg = <0xe083c000 0x100>, <0x110000 0xcc00>;
448                         reg-names = "m_can", "message_ram";
449                         interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
450                                      <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
451                         interrupt-names = "int0", "int1";
452                         clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>;
453                         clock-names = "hclk", "cclk";
454                         assigned-clocks = <&pmc PMC_TYPE_GCK 66>;
455                         assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
456                         assigned-clock-rates = <40000000>;
457                         bosch,mram-cfg = <0x8800 0 0 64 0 0 32 32>;
458                         status = "disabled";
459                 };
460 
461                 adc: adc@e1000000 {
462                         compatible = "microchip,sama7g5-adc";
463                         reg = <0xe1000000 0x200>;
464                         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
465                         clocks = <&pmc PMC_TYPE_GCK 26>;
466                         assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
467                         assigned-clock-rates = <100000000>;
468                         clock-names = "adc_clk";
469                         dmas = <&dma0 AT91_XDMAC_DT_PERID(0)>;
470                         dma-names = "rx";
471                         atmel,min-sample-rate-hz = <200000>;
472                         atmel,max-sample-rate-hz = <20000000>;
473                         atmel,startup-time-ms = <4>;
474                         #io-channel-cells = <1>;
475                         nvmem-cells = <&temperature_calib>;
476                         nvmem-cell-names = "temperature_calib";
477                         status = "disabled";
478                 };
479 
480                 sdmmc0: mmc@e1204000 {
481                         compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
482                         reg = <0xe1204000 0x4000>;
483                         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
484                         clocks = <&pmc PMC_TYPE_PERIPHERAL 80>, <&pmc PMC_TYPE_GCK 80>;
485                         clock-names = "hclock", "multclk";
486                         assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
487                         assigned-clocks = <&pmc PMC_TYPE_GCK 80>;
488                         assigned-clock-rates = <200000000>;
489                         microchip,sdcal-inverted;
490                         status = "disabled";
491                 };
492 
493                 sdmmc1: mmc@e1208000 {
494                         compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
495                         reg = <0xe1208000 0x4000>;
496                         interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
497                         clocks = <&pmc PMC_TYPE_PERIPHERAL 81>, <&pmc PMC_TYPE_GCK 81>;
498                         clock-names = "hclock", "multclk";
499                         assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
500                         assigned-clocks = <&pmc PMC_TYPE_GCK 81>;
501                         assigned-clock-rates = <200000000>;
502                         microchip,sdcal-inverted;
503                         status = "disabled";
504                 };
505 
506                 sdmmc2: mmc@e120c000 {
507                         compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
508                         reg = <0xe120c000 0x4000>;
509                         interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
510                         clocks = <&pmc PMC_TYPE_PERIPHERAL 82>, <&pmc PMC_TYPE_GCK 82>;
511                         clock-names = "hclock", "multclk";
512                         assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
513                         assigned-clocks = <&pmc PMC_TYPE_GCK 82>;
514                         assigned-clock-rates = <200000000>;
515                         microchip,sdcal-inverted;
516                         status = "disabled";
517                 };
518 
519                 csi2dc: csi2dc@e1404000 {
520                         compatible = "microchip,sama7g5-csi2dc";
521                         reg = <0xe1404000 0x500>;
522                         clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&xisc>;
523                         clock-names = "pclk", "scck";
524                         assigned-clocks = <&xisc>;
525                         assigned-clock-rates = <266000000>;
526                         status = "disabled";
527 
528                         ports {
529                                 #address-cells = <1>;
530                                 #size-cells = <0>;
531                                 port@0 {
532                                         reg = <0>;
533                                         csi2dc_in: endpoint {
534                                         };
535                                 };
536 
537                                 port@1 {
538                                         reg = <1>;
539                                         csi2dc_out: endpoint {
540                                                 bus-width = <14>;
541                                                 hsync-active = <1>;
542                                                 vsync-active = <1>;
543                                                 remote-endpoint = <&xisc_in>;
544                                         };
545                                 };
546                         };
547                 };
548 
549                 xisc: xisc@e1408000 {
550                         compatible = "microchip,sama7g5-isc";
551                         reg = <0xe1408000 0x2000>;
552                         interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
553                         clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
554                         clock-names = "hclock";
555                         #clock-cells = <0>;
556                         clock-output-names = "isc-mck";
557                         status = "disabled";
558 
559                         port {
560                                 xisc_in: endpoint {
561                                         bus-type = <5>; /* Parallel */
562                                         bus-width = <14>;
563                                         hsync-active = <1>;
564                                         vsync-active = <1>;
565                                         remote-endpoint = <&csi2dc_out>;
566                                 };
567                         };
568                 };
569 
570                 pwm: pwm@e1604000 {
571                         compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm";
572                         reg = <0xe1604000 0x4000>;
573                         interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
574                         #pwm-cells = <3>;
575                         clocks = <&pmc PMC_TYPE_PERIPHERAL 77>;
576                         status = "disabled";
577                 };
578 
579                 pdmc0: sound@e1608000 {
580                         compatible = "microchip,sama7g5-pdmc";
581                         reg = <0xe1608000 0x1000>;
582                         interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
583                         #sound-dai-cells = <0>;
584                         dmas = <&dma0 AT91_XDMAC_DT_PERID(37)>;
585                         dma-names = "rx";
586                         clocks = <&pmc PMC_TYPE_PERIPHERAL 68>, <&pmc PMC_TYPE_GCK 68>;
587                         clock-names = "pclk", "gclk";
588                         status = "disabled";
589                 };
590 
591                 pdmc1: sound@e160c000 {
592                         compatible = "microchip,sama7g5-pdmc";
593                         reg = <0xe160c000 0x1000>;
594                         interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
595                         #sound-dai-cells = <0>;
596                         dmas = <&dma0 AT91_XDMAC_DT_PERID(38)>;
597                         dma-names = "rx";
598                         clocks = <&pmc PMC_TYPE_PERIPHERAL 69>, <&pmc PMC_TYPE_GCK 69>;
599                         clock-names = "pclk", "gclk";
600                         status = "disabled";
601                 };
602 
603                 spdifrx: spdifrx@e1614000 {
604                         #sound-dai-cells = <0>;
605                         compatible = "microchip,sama7g5-spdifrx";
606                         reg = <0xe1614000 0x4000>;
607                         interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
608                         dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>;
609                         dma-names = "rx";
610                         clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>;
611                         clock-names = "pclk", "gclk";
612                         status = "disabled";
613                 };
614 
615                 spdiftx: spdiftx@e1618000 {
616                         #sound-dai-cells = <0>;
617                         compatible = "microchip,sama7g5-spdiftx";
618                         reg = <0xe1618000 0x4000>;
619                         interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
620                         dmas = <&dma0 AT91_XDMAC_DT_PERID(50)>;
621                         dma-names = "tx";
622                         clocks = <&pmc PMC_TYPE_PERIPHERAL 85>, <&pmc PMC_TYPE_GCK 85>;
623                         clock-names = "pclk", "gclk";
624                 };
625 
626                 i2s0: i2s@e161c000 {
627                         compatible = "microchip,sama7g5-i2smcc";
628                         #sound-dai-cells = <0>;
629                         reg = <0xe161c000 0x4000>;
630                         interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
631                         dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>, <&dma0 AT91_XDMAC_DT_PERID(33)>;
632                         dma-names = "tx", "rx";
633                         clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
634                         clock-names = "pclk", "gclk";
635                         status = "disabled";
636                 };
637 
638                 i2s1: i2s@e1620000 {
639                         compatible = "microchip,sama7g5-i2smcc";
640                         #sound-dai-cells = <0>;
641                         reg = <0xe1620000 0x4000>;
642                         interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
643                         dmas = <&dma0 AT91_XDMAC_DT_PERID(36)>, <&dma0 AT91_XDMAC_DT_PERID(35)>;
644                         dma-names = "tx", "rx";
645                         clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
646                         clock-names = "pclk", "gclk";
647                         status = "disabled";
648                 };
649 
650                 eic: interrupt-controller@e1628000 {
651                         compatible = "microchip,sama7g5-eic";
652                         reg = <0xe1628000 0xec>;
653                         interrupt-parent = <&gic>;
654                         interrupt-controller;
655                         #interrupt-cells = <2>;
656                         interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
657                                      <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
658                         clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
659                         clock-names = "pclk";
660                         status = "disabled";
661                 };
662 
663                 pit64b0: timer@e1800000 {
664                         compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
665                         reg = <0xe1800000 0x4000>;
666                         interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
667                         clocks = <&pmc PMC_TYPE_PERIPHERAL 70>, <&pmc PMC_TYPE_GCK 70>;
668                         clock-names = "pclk", "gclk";
669                 };
670 
671                 pit64b1: timer@e1804000 {
672                         compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
673                         reg = <0xe1804000 0x4000>;
674                         interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
675                         clocks = <&pmc PMC_TYPE_PERIPHERAL 71>, <&pmc PMC_TYPE_GCK 71>;
676                         clock-names = "pclk", "gclk";
677                 };
678 
679                 aes: crypto@e1810000 {
680                         compatible = "atmel,at91sam9g46-aes";
681                         reg = <0xe1810000 0x100>;
682                         interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
683                         clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
684                         clock-names = "aes_clk";
685                         dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
686                                <&dma0 AT91_XDMAC_DT_PERID(2)>;
687                         dma-names = "tx", "rx";
688                 };
689 
690                 sha: crypto@e1814000 {
691                         compatible = "atmel,at91sam9g46-sha";
692                         reg = <0xe1814000 0x100>;
693                         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
694                         clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
695                         clock-names = "sha_clk";
696                         dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
697                         dma-names = "tx";
698                 };
699 
700                 flx0: flexcom@e1818000 {
701                         compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
702                         reg = <0xe1818000 0x200>;
703                         clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
704                         #address-cells = <1>;
705                         #size-cells = <1>;
706                         ranges = <0x0 0xe1818000 0x800>;
707                         status = "disabled";
708 
709                         uart0: serial@200 {
710                                 compatible = "atmel,at91sam9260-usart";
711                                 reg = <0x200 0x200>;
712                                 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
713                                 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
714                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
715                                 clock-names = "usart";
716                                 dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
717                                        <&dma1 AT91_XDMAC_DT_PERID(5)>;
718                                 dma-names = "tx", "rx";
719                                 atmel,use-dma-rx;
720                                 atmel,use-dma-tx;
721                                 status = "disabled";
722                         };
723                 };
724 
725                 flx1: flexcom@e181c000 {
726                         compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
727                         reg = <0xe181c000 0x200>;
728                         clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
729                         #address-cells = <1>;
730                         #size-cells = <1>;
731                         ranges = <0x0 0xe181c000 0x800>;
732                         status = "disabled";
733 
734                         i2c1: i2c@600 {
735                                 compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
736                                 reg = <0x600 0x200>;
737                                 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
738                                 #address-cells = <1>;
739                                 #size-cells = <0>;
740                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
741                                 atmel,fifo-size = <32>;
742                                 dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
743                                        <&dma0 AT91_XDMAC_DT_PERID(7)>;
744                                 dma-names = "tx", "rx";
745                                 status = "disabled";
746                         };
747                 };
748 
749                 flx3: flexcom@e1824000 {
750                         compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
751                         reg = <0xe1824000 0x200>;
752                         clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
753                         #address-cells = <1>;
754                         #size-cells = <1>;
755                         ranges = <0x0 0xe1824000 0x800>;
756                         status = "disabled";
757 
758                         uart3: serial@200 {
759                                 compatible = "atmel,at91sam9260-usart";
760                                 reg = <0x200 0x200>;
761                                 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
762                                 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
763                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
764                                 clock-names = "usart";
765                                 dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>,
766                                        <&dma1 AT91_XDMAC_DT_PERID(11)>;
767                                 dma-names = "tx", "rx";
768                                 atmel,use-dma-rx;
769                                 atmel,use-dma-tx;
770                                 status = "disabled";
771                         };
772                 };
773 
774                 trng: rng@e2010000 {
775                         compatible = "microchip,sama7g5-trng", "atmel,at91sam9g45-trng";
776                         reg = <0xe2010000 0x100>;
777                         interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
778                         clocks = <&pmc PMC_TYPE_PERIPHERAL 97>;
779                         status = "disabled";
780                 };
781 
782                 tdes: crypto@e2014000 {
783                         compatible = "atmel,at91sam9g46-tdes";
784                         reg = <0xe2014000 0x100>;
785                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
786                         clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
787                         clock-names = "tdes_clk";
788                         dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
789                                <&dma0 AT91_XDMAC_DT_PERID(53)>;
790                         dma-names = "tx", "rx";
791                 };
792 
793                 flx4: flexcom@e2018000 {
794                         compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
795                         reg = <0xe2018000 0x200>;
796                         clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
797                         #address-cells = <1>;
798                         #size-cells = <1>;
799                         ranges = <0x0 0xe2018000 0x800>;
800                         status = "disabled";
801 
802                         uart4: serial@200 {
803                                 compatible = "atmel,at91sam9260-usart";
804                                 reg = <0x200 0x200>;
805                                 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
806                                 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
807                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
808                                 clock-names = "usart";
809                                 dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
810                                        <&dma1 AT91_XDMAC_DT_PERID(13)>;
811                                 dma-names = "tx", "rx";
812                                 atmel,use-dma-rx;
813                                 atmel,use-dma-tx;
814                                 atmel,fifo-size = <16>;
815                                 status = "disabled";
816                         };
817                 };
818 
819                 flx7: flexcom@e2024000 {
820                         compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
821                         reg = <0xe2024000 0x200>;
822                         clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
823                         #address-cells = <1>;
824                         #size-cells = <1>;
825                         ranges = <0x0 0xe2024000 0x800>;
826                         status = "disabled";
827 
828                         uart7: serial@200 {
829                                 compatible = "atmel,at91sam9260-usart";
830                                 reg = <0x200 0x200>;
831                                 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
832                                 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
833                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
834                                 clock-names = "usart";
835                                 dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
836                                        <&dma1 AT91_XDMAC_DT_PERID(19)>;
837                                 dma-names = "tx", "rx";
838                                 atmel,use-dma-rx;
839                                 atmel,use-dma-tx;
840                                 atmel,fifo-size = <16>;
841                                 status = "disabled";
842                         };
843                 };
844 
845                 gmac0: ethernet@e2800000 {
846                         compatible = "microchip,sama7g5-gem";
847                         reg = <0xe2800000 0x1000>;
848                         interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
849                                      <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
850                                      <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
851                                      <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
852                                      <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
853                                      <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
854                         clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_GCK 51>, <&pmc PMC_TYPE_GCK 53>;
855                         clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
856                         assigned-clocks = <&pmc PMC_TYPE_GCK 51>;
857                         assigned-clock-rates = <125000000>;
858                         status = "disabled";
859                 };
860 
861                 gmac1: ethernet@e2804000 {
862                         compatible = "microchip,sama7g5-emac";
863                         reg = <0xe2804000 0x1000>;
864                         interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
865                                      <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
866                         clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&pmc PMC_TYPE_PERIPHERAL 52>;
867                         clock-names = "pclk", "hclk";
868                         status = "disabled";
869                 };
870 
871                 dma0: dma-controller@e2808000 {
872                         compatible = "microchip,sama7g5-dma";
873                         reg = <0xe2808000 0x1000>;
874                         interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
875                         #dma-cells = <1>;
876                         clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
877                         clock-names = "dma_clk";
878                         status = "disabled";
879                 };
880 
881                 dma1: dma-controller@e280c000 {
882                         compatible = "microchip,sama7g5-dma";
883                         reg = <0xe280c000 0x1000>;
884                         interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
885                         #dma-cells = <1>;
886                         clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
887                         clock-names = "dma_clk";
888                         status = "disabled";
889                 };
890 
891                 /* Place dma2 here despite it's address */
892                 dma2: dma-controller@e1200000 {
893                         compatible = "microchip,sama7g5-dma";
894                         reg = <0xe1200000 0x1000>;
895                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
896                         #dma-cells = <1>;
897                         clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
898                         clock-names = "dma_clk";
899                         dma-requests = <0>;
900                         status = "disabled";
901                 };
902 
903                 tcb0: timer@e2814000 {
904                         compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
905                         #address-cells = <1>;
906                         #size-cells = <0>;
907                         reg = <0xe2814000 0x100>;
908                         interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
909                         clocks = <&pmc PMC_TYPE_PERIPHERAL 88>, <&pmc PMC_TYPE_PERIPHERAL 89>, <&pmc PMC_TYPE_PERIPHERAL 90>, <&clk32k 1>;
910                         clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
911                 };
912 
913                 flx8: flexcom@e2818000 {
914                         compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
915                         reg = <0xe2818000 0x200>;
916                         clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
917                         #address-cells = <1>;
918                         #size-cells = <1>;
919                         ranges = <0x0 0xe2818000 0x800>;
920                         status = "disabled";
921 
922                         i2c8: i2c@600 {
923                                 compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
924                                 reg = <0x600 0x200>;
925                                 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
926                                 #address-cells = <1>;
927                                 #size-cells = <0>;
928                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
929                                 atmel,fifo-size = <32>;
930                                 dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
931                                        <&dma0 AT91_XDMAC_DT_PERID(21)>;
932                                 dma-names = "tx", "rx";
933                                 status = "disabled";
934                         };
935                 };
936 
937                 flx9: flexcom@e281c000 {
938                         compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
939                         reg = <0xe281c000 0x200>;
940                         clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
941                         #address-cells = <1>;
942                         #size-cells = <1>;
943                         ranges = <0x0 0xe281c000 0x800>;
944                         status = "disabled";
945 
946                         i2c9: i2c@600 {
947                                 compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
948                                 reg = <0x600 0x200>;
949                                 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
950                                 #address-cells = <1>;
951                                 #size-cells = <0>;
952                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
953                                 atmel,fifo-size = <32>;
954                                 dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
955                                        <&dma0 AT91_XDMAC_DT_PERID(23)>;
956                                 dma-names = "tx", "rx";
957                                 status = "disabled";
958                         };
959                 };
960 
961                 flx10: flexcom@e2820000 {
962                         compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
963                         reg = <0xe2820000 0x200>;
964                         clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
965                         #address-cells = <1>;
966                         #size-cells = <1>;
967                         ranges = <0x0 0xe2820000 0x800>;
968                         status = "disabled";
969 
970                         i2c10: i2c@600 {
971                                 compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
972                                 reg = <0x600 0x200>;
973                                 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
974                                 #address-cells = <1>;
975                                 #size-cells = <0>;
976                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
977                                 atmel,fifo-size = <32>;
978                                 dmas = <&dma0 AT91_XDMAC_DT_PERID(26)>,
979                                        <&dma0 AT91_XDMAC_DT_PERID(25)>;
980                                 dma-names = "tx", "rx";
981                                 status = "disabled";
982                         };
983                 };
984 
985                 flx11: flexcom@e2824000 {
986                         compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
987                         reg = <0xe2824000 0x200>;
988                         clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
989                         #address-cells = <1>;
990                         #size-cells = <1>;
991                         ranges = <0x0 0xe2824000 0x800>;
992                         status = "disabled";
993 
994                         spi11: spi@400 {
995                                 compatible = "atmel,at91rm9200-spi";
996                                 reg = <0x400 0x200>;
997                                 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
998                                 clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
999                                 clock-names = "spi_clk";
1000                                 #address-cells = <1>;
1001                                 #size-cells = <0>;
1002                                 atmel,fifo-size = <32>;
1003                                 dmas = <&dma0 AT91_XDMAC_DT_PERID(28)>,
1004                                        <&dma0 AT91_XDMAC_DT_PERID(27)>;
1005                                 dma-names = "tx", "rx";
1006                                 status = "disabled";
1007                         };
1008                 };
1009 
1010                 uddrc: uddrc@e3800000 {
1011                         compatible = "microchip,sama7g5-uddrc";
1012                         reg = <0xe3800000 0x4000>;
1013                 };
1014 
1015                 ddr3phy: ddr3phy@e3804000 {
1016                         compatible = "microchip,sama7g5-ddr3phy";
1017                         reg = <0xe3804000 0x1000>;
1018                 };
1019 
1020                 otpc: efuse@e8c00000 {
1021                         compatible = "microchip,sama7g5-otpc", "syscon";
1022                         reg = <0xe8c00000 0x100>;
1023                         #address-cells = <1>;
1024                         #size-cells = <1>;
1025 
1026                         temperature_calib: calib@1 {
1027                                 reg = <OTP_PKT(1) 76>;
1028                         };
1029                 };
1030 
1031                 gic: interrupt-controller@e8c11000 {
1032                         compatible = "arm,cortex-a7-gic";
1033                         #interrupt-cells = <3>;
1034                         #address-cells = <0>;
1035                         interrupt-controller;
1036                         reg = <0xe8c11000 0x1000>,
1037                                 <0xe8c12000 0x2000>;
1038                 };
1039         };
1040 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php