~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts

Version: ~ [ linux-6.12-rc7 ] ~ [ linux-6.11.7 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.60 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.116 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.171 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.229 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.285 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.323 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.12 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
  2 /*
  3  * Copyright (c) 2014 Protonic Holland
  4  */
  5 
  6 /dts-v1/;
  7 #include "imx6q.dtsi"
  8 #include "imx6qdl-prti6q.dtsi"
  9 #include <dt-bindings/leds/common.h>
 10 #include <dt-bindings/sound/fsl-imx-audmux.h>
 11 
 12 / {
 13         model = "Protonic PRTI6Q board";
 14         compatible = "prt,prti6q", "fsl,imx6q";
 15 
 16         memory@10000000 {
 17                 device_type = "memory";
 18                 reg = <0x10000000 0xf0000000>;
 19         };
 20 
 21         backlight_lcd: backlight-lcd {
 22                 compatible = "pwm-backlight";
 23                 pinctrl-names = "default";
 24                 pinctrl-0 = <&pinctrl_backlight>;
 25                 pwms = <&pwm1 0 5000000 0>;
 26                 brightness-levels = <0 16 64 255>;
 27                 num-interpolated-steps = <16>;
 28                 default-brightness-level = <1>;
 29                 power-supply = <&reg_3v3>;
 30                 enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
 31         };
 32 
 33         can_osc: can-osc {
 34                 compatible = "fixed-clock";
 35                 #clock-cells = <0>;
 36                 clock-frequency = <25000000>;
 37         };
 38 
 39         leds {
 40                 compatible = "gpio-leds";
 41                 pinctrl-names = "default";
 42                 pinctrl-0 = <&pinctrl_leds>;
 43 
 44                 led-debug0 {
 45                         function = LED_FUNCTION_STATUS;
 46                         gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 47                         linux,default-trigger = "heartbeat";
 48                 };
 49 
 50                 led-debug1 {
 51                         function = LED_FUNCTION_SD;
 52                         gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 53                         linux,default-trigger = "disk-activity";
 54                 };
 55         };
 56 
 57         panel {
 58                 compatible = "kyo,tcg121xglp";
 59                 backlight = <&backlight_lcd>;
 60 
 61                 port {
 62                         panel_in: endpoint {
 63                                 remote-endpoint = <&lvds0_out>;
 64                         };
 65                 };
 66         };
 67 
 68         reg_1v8: regulator-1v8 {
 69                 compatible = "regulator-fixed";
 70                 regulator-name = "1v8";
 71                 regulator-min-microvolt = <1800000>;
 72                 regulator-max-microvolt = <1800000>;
 73         };
 74 
 75         reg_wifi: regulator-wifi {
 76                 compatible = "regulator-fixed";
 77                 pinctrl-names = "default";
 78                 pinctrl-0 = <&pinctrl_wifi_npd>;
 79                 enable-active-high;
 80                 gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
 81                 regulator-max-microvolt = <1800000>;
 82                 regulator-min-microvolt = <1800000>;
 83                 regulator-name = "regulator-WL12xx";
 84                 startup-delay-us = <70000>;
 85         };
 86 
 87         sound {
 88                 compatible = "simple-audio-card";
 89                 simple-audio-card,name = "prti6q-sgtl5000";
 90                 simple-audio-card,format = "i2s";
 91                 simple-audio-card,widgets =
 92                         "Microphone", "Microphone Jack",
 93                         "Line", "Line In Jack",
 94                         "Headphone", "Headphone Jack",
 95                         "Speaker", "External Speaker";
 96                 simple-audio-card,routing =
 97                         "MIC_IN", "Microphone Jack",
 98                         "LINE_IN", "Line In Jack",
 99                         "Headphone Jack", "HP_OUT",
100                         "External Speaker", "LINE_OUT";
101 
102                 simple-audio-card,cpu {
103                         sound-dai = <&ssi1>;
104                         system-clock-frequency = <0>;
105                 };
106 
107                 simple-audio-card,codec {
108                         sound-dai = <&sgtl5000>;
109                         bitclock-master;
110                         frame-master;
111                 };
112         };
113 
114         spdif_out: spdif-out {
115                 compatible = "linux,spdif-dit";
116                 #sound-dai-cells = <0>;
117         };
118 
119         spdif_in: spdif-in {
120                 compatible = "linux,spdif-dir";
121                 #sound-dai-cells = <0>;
122         };
123 
124         sound-spdif {
125                 compatible = "fsl,imx-audio-spdif";
126                 model = "imx-spdif";
127                 audio-cpu = <&spdif>;
128                 audio-codec = <&spdif_out>, <&spdif_in>;
129         };
130 };
131 
132 &audmux {
133         pinctrl-names = "default";
134         pinctrl-0 = <&pinctrl_audmux>;
135         status = "okay";
136 
137         mux-ssi1 {
138                 fsl,audmux-port = <0>;
139                 fsl,port-config = <
140                         IMX_AUDMUX_V2_PTCR_SYN          0
141                         IMX_AUDMUX_V2_PTCR_TFSEL(2)     0
142                         IMX_AUDMUX_V2_PTCR_TCSEL(2)     0
143                         IMX_AUDMUX_V2_PTCR_TFSDIR       0
144                         IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
145                 >;
146         };
147 
148         mux-pins3 {
149                 fsl,audmux-port = <2>;
150                 fsl,port-config = <
151                         IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
152                         0                      IMX_AUDMUX_V2_PDCR_TXRXEN
153                 >;
154         };
155 };
156 
157 &can1 {
158         pinctrl-names = "default";
159         pinctrl-0 = <&pinctrl_can1>;
160         status = "okay";
161 };
162 
163 &can2 {
164         pinctrl-names = "default";
165         pinctrl-0 = <&pinctrl_can2>;
166         status = "okay";
167 };
168 
169 &ecspi1 {
170         cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
171         pinctrl-names = "default";
172         pinctrl-0 = <&pinctrl_ecspi1>;
173         status = "okay";
174 
175         flash@0 {
176                 compatible = "jedec,spi-nor";
177                 reg = <0>;
178                 spi-max-frequency = <20000000>;
179         };
180 };
181 
182 &ecspi2 {
183         cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio4 25 GPIO_ACTIVE_LOW>;
184         pinctrl-names = "default";
185         pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
186         status = "okay";
187 
188         can@0 {
189                 compatible = "microchip,mcp2515";
190                 reg = <0>;
191                 pinctrl-names = "default";
192                 pinctrl-0 = <&pinctrl_can3>;
193                 clocks = <&can_osc>;
194                 interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
195                 spi-max-frequency = <5000000>;
196         };
197 
198         adc@1 {
199                 compatible = "ti,adc128s052";
200                 reg = <1>;
201                 spi-max-frequency = <2000000>;
202                 vref-supply = <&reg_3v3>;
203         };
204 };
205 
206 &ecspi3 {
207         cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
208         pinctrl-names = "default";
209         pinctrl-0 = <&pinctrl_ecspi3>;
210         status = "okay";
211 };
212 
213 &fec {
214         pinctrl-names = "default";
215         pinctrl-0 = <&pinctrl_enet>;
216         phy-mode = "rgmii-id";
217         phy-handle = <&rgmii_phy>;
218         status = "okay";
219 
220         mdio {
221                 #address-cells = <1>;
222                 #size-cells = <0>;
223 
224                 /* Microchip KSZ9031RNX PHY */
225                 rgmii_phy: ethernet-phy@0 {
226                         reg = <0>;
227                         interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
228                         reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
229                         reset-assert-us = <10000>;
230                         reset-deassert-us = <300>;
231                 };
232         };
233 };
234 
235 &hdmi {
236         pinctrl-names = "default";
237         pinctrl-0 = <&pinctrl_hdmi>;
238         ddc-i2c-bus = <&i2c2>;
239         status = "okay";
240 };
241 
242 &i2c1 {
243         sgtl5000: audio-codec@a {
244                 compatible = "fsl,sgtl5000";
245                 reg = <0xa>;
246                 #sound-dai-cells = <0>;
247                 clocks = <&clks 201>;
248                 VDDA-supply = <&reg_3v3>;
249                 VDDIO-supply = <&reg_3v3>;
250                 VDDD-supply = <&reg_1v8>;
251         };
252 };
253 
254 /* DDC */
255 &i2c2 {
256         clock-frequency = <100000>;
257         pinctrl-names = "default";
258         pinctrl-0 = <&pinctrl_i2c2>;
259         status = "okay";
260 };
261 
262 &i2c3 {
263         adc@49 {
264                 compatible = "ti,ads1015";
265                 reg = <0x49>;
266                 #address-cells = <1>;
267                 #size-cells = <0>;
268 
269                 /* can2_l */
270                 channel@4 {
271                         reg = <4>;
272                         ti,gain = <3>;
273                         ti,datarate = <3>;
274                 };
275 
276                 /* can2_h */
277                 channel@5 {
278                         reg = <5>;
279                         ti,gain = <3>;
280                         ti,datarate = <3>;
281                 };
282 
283                 /* can1_l */
284                 channel@6 {
285                         reg = <6>;
286                         ti,gain = <3>;
287                         ti,datarate = <3>;
288                 };
289 
290                 /* can1_h */
291                 channel@7 {
292                         reg = <7>;
293                         ti,gain = <3>;
294                         ti,datarate = <3>;
295                 };
296         };
297 };
298 
299 &pcie {
300         status = "okay";
301 };
302 
303 &pwm1 {
304         pinctrl-names = "default";
305         pinctrl-0 = <&pinctrl_pwm1>;
306         status = "okay";
307 };
308 
309 &ldb {
310         status = "okay";
311 
312         lvds-channel@0 {
313                 status = "okay";
314 
315                 port@4 {
316                         reg = <4>;
317 
318                         lvds0_out: endpoint {
319                                 remote-endpoint = <&panel_in>;
320                         };
321                 };
322         };
323 };
324 
325 &sata {
326         status = "okay";
327 };
328 
329 &snvs_poweroff {
330         status = "okay";
331 };
332 
333 &spdif {
334         pinctrl-names = "default";
335         pinctrl-0 = <&pinctrl_spdif>;
336         status = "okay";
337 };
338 
339 &ssi1 {
340         #sound-dai-cells = <0>;
341         fsl,mode = "ac97-slave";
342         status = "okay";
343 };
344 
345 &uart2 {
346         pinctrl-names = "default";
347         pinctrl-0 = <&pinctrl_uart2>;
348         status = "okay";
349 };
350 
351 &uart5 {
352         pinctrl-names = "default";
353         pinctrl-0 = <&pinctrl_uart5>;
354         status = "okay";
355 };
356 
357 &usbotg {
358         pinctrl-0 = <&pinctrl_usbotg &pinctrl_usbotg_id>;
359 };
360 
361 &usdhc2 {
362         pinctrl-names = "default";
363         pinctrl-0 = <&pinctrl_usdhc2>;
364         non-removable;
365         vmmc-supply = <&reg_wifi>;
366         cap-power-off-card;
367         keep-power-in-suspend;
368         status = "okay";
369 
370         #address-cells = <1>;
371         #size-cells = <0>;
372         wifi@2 {
373                 compatible = "ti,wl1271";
374                 reg = <2>;
375                 pinctrl-names = "default";
376                 pinctrl-0 = <&pinctrl_wifi>;
377                 interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
378                 ref-clock-frequency = <38400000>;
379                 tcxo-clock-frequency = <19200000>;
380         };
381 };
382 
383 &iomuxc {
384         pinctrl_audmux: audmuxgrp {
385                 fsl,pins = <
386                         MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1         0x030b0
387                         MX6QDL_PAD_CSI0_DAT7__AUD3_RXD          0x130b0
388                         MX6QDL_PAD_CSI0_DAT4__AUD3_TXC          0x130b0
389                         MX6QDL_PAD_CSI0_DAT5__AUD3_TXD          0x110b0
390                         MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS         0x130b0
391                 >;
392         };
393 
394         pinctrl_backlight: backlightgrp {
395                 fsl,pins = <
396                         MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28       0x1b0b0
397                 >;
398         };
399 
400         pinctrl_can2: can2grp {
401                 fsl,pins = <
402                         MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX        0x1b008
403                         MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX        0x1b008
404                 >;
405         };
406 
407         pinctrl_can3: can3grp {
408                 fsl,pins = <
409                         MX6QDL_PAD_EIM_D20__GPIO3_IO20          0x1b0b1
410                 >;
411         };
412 
413         pinctrl_ecspi1: ecspi1grp {
414                 fsl,pins = <
415                         MX6QDL_PAD_EIM_D17__ECSPI1_MISO         0x100b1
416                         MX6QDL_PAD_EIM_D18__ECSPI1_MOSI         0x100b1
417                         MX6QDL_PAD_EIM_D16__ECSPI1_SCLK         0x100b1
418                         /* CS */
419                         MX6QDL_PAD_EIM_D19__GPIO3_IO19          0x000b1
420                 >;
421         };
422 
423         pinctrl_ecspi2: ecspi2grp {
424                 fsl,pins = <
425                         MX6QDL_PAD_EIM_OE__ECSPI2_MISO          0x100b1
426                         MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK         0x100b1
427                         MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI         0x100b1
428                         MX6QDL_PAD_EIM_RW__GPIO2_IO26           0x000b1
429                 >;
430         };
431 
432         pinctrl_ecspi2_cs: ecspi2csgrp {
433                 fsl,pins = <
434                         /* ADC128S022 CS */
435                         MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25       0x1b0b1
436                 >;
437         };
438 
439         pinctrl_ecspi3: ecspi3grp {
440                 fsl,pins = <
441                         MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK      0x100b1
442                         MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI      0x100b1
443                         MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO      0x100b1
444                         MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24       0x000b1
445                 >;
446         };
447 
448         pinctrl_enet: enetgrp {
449                 fsl,pins = <
450                         MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
451                         MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
452                         MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
453                         MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
454                         MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
455                         MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
456                         MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x10030
457                         MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x10030
458                         MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x10030
459                         MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x10030
460                         MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x10030
461                         MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x10030
462                         MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x10030
463                         MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x10030
464                         MX6QDL_PAD_ENET_MDC__ENET_MDC           0x10030
465 
466                         /* Phy reset */
467                         MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25      0x1b0b0
468                         MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28       0x1b0b1
469                 >;
470         };
471 
472         pinctrl_hdmi: hdmigrp {
473                 fsl,pins = <
474                         /* NOTE: DDC is done via I2C2, so DON'T
475                          * configure DDC pins for HDMI!
476                          */
477                         MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE    0x1f8b0
478                 >;
479         };
480 
481         /* DDC */
482         pinctrl_i2c2: i2c2grp {
483                 fsl,pins = <
484                         MX6QDL_PAD_KEY_COL3__I2C2_SCL   0x4001b8b1
485                         MX6QDL_PAD_KEY_ROW3__I2C2_SDA   0x4001b8b1
486                 >;
487         };
488 
489         pinctrl_leds: ledsgrp {
490                 fsl,pins = <
491                         MX6QDL_PAD_GPIO_8__GPIO1_IO08           0x1b0b0
492                         MX6QDL_PAD_GPIO_9__GPIO1_IO09           0x1b0b0
493                 >;
494         };
495 
496         pinctrl_pwm1: pwm1grp {
497                 fsl,pins = <
498                         MX6QDL_PAD_DISP0_DAT8__PWM1_OUT         0x1b0b0
499                 >;
500         };
501 
502         pinctrl_spdif: spdifgrp {
503                 fsl,pins = <
504                         MX6QDL_PAD_GPIO_16__SPDIF_IN            0x1b0b0
505                         MX6QDL_PAD_GPIO_19__SPDIF_OUT           0x1b0b0
506                 >;
507         };
508 
509         pinctrl_uart2: uart2grp {
510                 fsl,pins = <
511                         MX6QDL_PAD_EIM_D26__UART2_RX_DATA       0x1b0b1
512                         MX6QDL_PAD_EIM_D27__UART2_TX_DATA       0x1b0b1
513                         MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B     0x1b0b1
514                         MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B     0x1b0b1
515                 >;
516         };
517 
518         pinctrl_uart5: uart5grp {
519                 fsl,pins = <
520                         MX6QDL_PAD_KEY_COL1__UART5_TX_DATA      0x1b0b1
521                         MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA      0x1b0b1
522                 >;
523         };
524 
525         pinctrl_usbotg_id: usbotgidgrp {
526                 fsl,pins = <
527                         MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID       0x1f058
528                 >;
529         };
530 
531         pinctrl_usdhc2: usdhc2grp {
532                 fsl,pins = <
533                         MX6QDL_PAD_SD2_CMD__SD2_CMD             0x170b9
534                         MX6QDL_PAD_SD2_CLK__SD2_CLK             0x100b9
535                         MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x170b9
536                         MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x170b9
537                         MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x170b9
538                         MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x170b9
539                 >;
540         };
541 
542         pinctrl_wifi: wifigrp {
543                 fsl,pins = <
544                         /* WL12xx IRQ */
545                         MX6QDL_PAD_ENET_TXD0__GPIO1_IO30        0x10880
546                 >;
547         };
548 
549         pinctrl_wifi_npd: wifinpd {
550                 fsl,pins = <
551                         MX6QDL_PAD_ENET_RXD1__GPIO1_IO26        0x1b8b0
552                 >;
553         };
554 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php