~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi

Version: ~ [ linux-6.12-rc7 ] ~ [ linux-6.11.7 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.60 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.116 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.171 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.229 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.285 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.323 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.12 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: GPL-2.0-or-later
  2 /*
  3  * Copyright 2013 Gateworks Corporation
  4  */
  5 
  6 #include <dt-bindings/gpio/gpio.h>
  7 #include <dt-bindings/input/linux-event-codes.h>
  8 #include <dt-bindings/interrupt-controller/irq.h>
  9 
 10 / {
 11         /* these are used by bootloader for disabling nodes */
 12         aliases {
 13                 led0 = &led0;
 14                 led1 = &led1;
 15                 nand = &gpmi;
 16                 usb0 = &usbh1;
 17                 usb1 = &usbotg;
 18         };
 19 
 20         chosen {
 21                 bootargs = "console=ttymxc1,115200";
 22         };
 23 
 24         gpio-keys {
 25                 compatible = "gpio-keys";
 26 
 27                 user-pb {
 28                         label = "user_pb";
 29                         gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 30                         linux,code = <BTN_0>;
 31                 };
 32 
 33                 user-pb1x {
 34                         label = "user_pb1x";
 35                         linux,code = <BTN_1>;
 36                         interrupt-parent = <&gsc>;
 37                         interrupts = <0>;
 38                 };
 39 
 40                 key-erased {
 41                         label = "key-erased";
 42                         linux,code = <BTN_2>;
 43                         interrupt-parent = <&gsc>;
 44                         interrupts = <1>;
 45                 };
 46 
 47                 eeprom-wp {
 48                         label = "eeprom_wp";
 49                         linux,code = <BTN_3>;
 50                         interrupt-parent = <&gsc>;
 51                         interrupts = <2>;
 52                 };
 53 
 54                 tamper {
 55                         label = "tamper";
 56                         linux,code = <BTN_4>;
 57                         interrupt-parent = <&gsc>;
 58                         interrupts = <5>;
 59                 };
 60 
 61                 switch-hold {
 62                         label = "switch_hold";
 63                         linux,code = <BTN_5>;
 64                         interrupt-parent = <&gsc>;
 65                         interrupts = <7>;
 66                 };
 67         };
 68 
 69         leds {
 70                 compatible = "gpio-leds";
 71                 pinctrl-names = "default";
 72                 pinctrl-0 = <&pinctrl_gpio_leds>;
 73 
 74                 led0: led-user1 {
 75                         label = "user1";
 76                         gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 77                         default-state = "on";
 78                         linux,default-trigger = "heartbeat";
 79                 };
 80 
 81                 led1: led-user2 {
 82                         label = "user2";
 83                         gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 84                         default-state = "off";
 85                 };
 86         };
 87 
 88         memory@10000000 {
 89                 device_type = "memory";
 90                 reg = <0x10000000 0x20000000>;
 91         };
 92 
 93         pps {
 94                 compatible = "pps-gpio";
 95                 pinctrl-names = "default";
 96                 pinctrl-0 = <&pinctrl_pps>;
 97                 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
 98                 status = "okay";
 99         };
100 
101         reg_3p3v: regulator-3p3v {
102                 compatible = "regulator-fixed";
103                 regulator-name = "3P3V";
104                 regulator-min-microvolt = <3300000>;
105                 regulator-max-microvolt = <3300000>;
106                 regulator-always-on;
107         };
108 
109         reg_5p0v: regulator-5p0v {
110                 compatible = "regulator-fixed";
111                 regulator-name = "5P0V";
112                 regulator-min-microvolt = <5000000>;
113                 regulator-max-microvolt = <5000000>;
114                 regulator-always-on;
115         };
116 
117         reg_usb_otg_vbus: regulator-usb-otg-vbus {
118                 compatible = "regulator-fixed";
119                 regulator-name = "usb_otg_vbus";
120                 regulator-min-microvolt = <5000000>;
121                 regulator-max-microvolt = <5000000>;
122                 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
123                 enable-active-high;
124         };
125 };
126 
127 &fec {
128         pinctrl-names = "default";
129         pinctrl-0 = <&pinctrl_enet>;
130         phy-mode = "rgmii-id";
131         phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
132         status = "okay";
133 };
134 
135 &gpmi {
136         pinctrl-names = "default";
137         pinctrl-0 = <&pinctrl_gpmi_nand>;
138         status = "okay";
139 };
140 
141 &hdmi {
142         ddc-i2c-bus = <&i2c3>;
143         status = "okay";
144 };
145 
146 &i2c1 {
147         clock-frequency = <100000>;
148         pinctrl-names = "default";
149         pinctrl-0 = <&pinctrl_i2c1>;
150         status = "okay";
151 
152         gsc: gsc@20 {
153                 compatible = "gw,gsc";
154                 reg = <0x20>;
155                 interrupt-parent = <&gpio1>;
156                 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
157                 interrupt-controller;
158                 #interrupt-cells = <1>;
159                 #size-cells = <0>;
160 
161                 adc {
162                         compatible = "gw,gsc-adc";
163                         #address-cells = <1>;
164                         #size-cells = <0>;
165 
166                         channel@0 {
167                                 gw,mode = <0>;
168                                 reg = <0x00>;
169                                 label = "temp";
170                         };
171 
172                         channel@2 {
173                                 gw,mode = <1>;
174                                 reg = <0x02>;
175                                 label = "vdd_vin";
176                         };
177 
178                         channel@5 {
179                                 gw,mode = <1>;
180                                 reg = <0x05>;
181                                 label = "vdd_3p3";
182                         };
183 
184                         channel@8 {
185                                 gw,mode = <1>;
186                                 reg = <0x08>;
187                                 label = "vdd_bat";
188                         };
189 
190                         channel@b {
191                                 gw,mode = <1>;
192                                 reg = <0x0b>;
193                                 label = "vdd_5p0";
194                         };
195 
196                         channel@e {
197                                 gw,mode = <1>;
198                                 reg = <0xe>;
199                                 label = "vdd_arm";
200                         };
201 
202                         channel@11 {
203                                 gw,mode = <1>;
204                                 reg = <0x11>;
205                                 label = "vdd_soc";
206                         };
207 
208                         channel@14 {
209                                 gw,mode = <1>;
210                                 reg = <0x14>;
211                                 label = "vdd_3p0";
212                         };
213 
214                         channel@17 {
215                                 gw,mode = <1>;
216                                 reg = <0x17>;
217                                 label = "vdd_1p5";
218                         };
219 
220                         channel@1d {
221                                 gw,mode = <1>;
222                                 reg = <0x1d>;
223                                 label = "vdd_1p8";
224                         };
225 
226                         channel@20 {
227                                 gw,mode = <1>;
228                                 reg = <0x20>;
229                                 label = "vdd_an1";
230                         };
231 
232                         channel@23 {
233                                 gw,mode = <1>;
234                                 reg = <0x23>;
235                                 label = "vdd_2p5";
236                         };
237                 };
238         };
239 
240         gsc_gpio: gpio@23 {
241                 compatible = "nxp,pca9555";
242                 reg = <0x23>;
243                 gpio-controller;
244                 #gpio-cells = <2>;
245                 interrupt-parent = <&gsc>;
246                 interrupts = <4>;
247         };
248 
249         eeprom1: eeprom@50 {
250                 compatible = "atmel,24c02";
251                 reg = <0x50>;
252                 pagesize = <16>;
253         };
254 
255         eeprom2: eeprom@51 {
256                 compatible = "atmel,24c02";
257                 reg = <0x51>;
258                 pagesize = <16>;
259         };
260 
261         eeprom3: eeprom@52 {
262                 compatible = "atmel,24c02";
263                 reg = <0x52>;
264                 pagesize = <16>;
265         };
266 
267         eeprom4: eeprom@53 {
268                 compatible = "atmel,24c02";
269                 reg = <0x53>;
270                 pagesize = <16>;
271         };
272 
273         rtc: ds1672@68 {
274                 compatible = "dallas,ds1672";
275                 reg = <0x68>;
276         };
277 };
278 
279 &i2c2 {
280         clock-frequency = <100000>;
281         pinctrl-names = "default";
282         pinctrl-0 = <&pinctrl_i2c2>;
283         status = "okay";
284 
285         ltc3676: pmic@3c {
286                 compatible = "lltc,ltc3676";
287                 reg = <0x3c>;
288                 pinctrl-names = "default";
289                 pinctrl-0 = <&pinctrl_pmic>;
290                 interrupt-parent = <&gpio1>;
291                 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
292 
293                 regulators {
294                         /* VDD_SOC (1+R1/R2 = 1.635) */
295                         reg_vdd_soc: sw1 {
296                                 regulator-name = "vddsoc";
297                                 regulator-min-microvolt = <674400>;
298                                 regulator-max-microvolt = <1308000>;
299                                 lltc,fb-voltage-divider = <127000 200000>;
300                                 regulator-ramp-delay = <7000>;
301                                 regulator-boot-on;
302                                 regulator-always-on;
303                         };
304 
305                         /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
306                         reg_1p8v: sw2 {
307                                 regulator-name = "vdd1p8";
308                                 regulator-min-microvolt = <1033310>;
309                                 regulator-max-microvolt = <2004000>;
310                                 lltc,fb-voltage-divider = <301000 200000>;
311                                 regulator-ramp-delay = <7000>;
312                                 regulator-boot-on;
313                                 regulator-always-on;
314                         };
315 
316                         /* VDD_ARM (1+R1/R2 = 1.635) */
317                         reg_vdd_arm: sw3 {
318                                 regulator-name = "vddarm";
319                                 regulator-min-microvolt = <674400>;
320                                 regulator-max-microvolt = <1308000>;
321                                 lltc,fb-voltage-divider = <127000 200000>;
322                                 regulator-ramp-delay = <7000>;
323                                 regulator-boot-on;
324                                 regulator-always-on;
325                         };
326 
327                         /* VDD_DDR (1+R1/R2 = 2.105) */
328                         reg_vdd_ddr: sw4 {
329                                 regulator-name = "vddddr";
330                                 regulator-min-microvolt = <868310>;
331                                 regulator-max-microvolt = <1684000>;
332                                 lltc,fb-voltage-divider = <221000 200000>;
333                                 regulator-ramp-delay = <7000>;
334                                 regulator-boot-on;
335                                 regulator-always-on;
336                         };
337 
338                         /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
339                         reg_2p5v: ldo2 {
340                                 regulator-name = "vdd2p5";
341                                 regulator-min-microvolt = <2490375>;
342                                 regulator-max-microvolt = <2490375>;
343                                 lltc,fb-voltage-divider = <487000 200000>;
344                                 regulator-boot-on;
345                                 regulator-always-on;
346                         };
347 
348                         /* VDD_HIGH (1+R1/R2 = 4.17) */
349                         reg_3p0v: ldo4 {
350                                 regulator-name = "vdd3p0";
351                                 regulator-min-microvolt = <3023250>;
352                                 regulator-max-microvolt = <3023250>;
353                                 lltc,fb-voltage-divider = <634000 200000>;
354                                 regulator-boot-on;
355                                 regulator-always-on;
356                         };
357                 };
358         };
359 };
360 
361 &i2c3 {
362         clock-frequency = <100000>;
363         pinctrl-names = "default";
364         pinctrl-0 = <&pinctrl_i2c3>;
365         status = "okay";
366 
367         adv7180: camera@20 {
368                 compatible = "adi,adv7180";
369                 pinctrl-names = "default";
370                 pinctrl-0 = <&pinctrl_adv7180>;
371                 reg = <0x20>;
372                 powerdown-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
373                 interrupt-parent = <&gpio5>;
374                 interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
375 
376                 port {
377                         adv7180_to_ipu1_csi0_mux: endpoint {
378                                 remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
379                                 bus-width = <8>;
380                         };
381                 };
382         };
383 };
384 
385 &ipu1_csi0_from_ipu1_csi0_mux {
386         bus-width = <8>;
387 };
388 
389 &ipu1_csi0_mux_from_parallel_sensor {
390         remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
391         bus-width = <8>;
392 };
393 
394 &ipu1_csi0 {
395         pinctrl-names = "default";
396         pinctrl-0 = <&pinctrl_ipu1_csi0>;
397 };
398 
399 &pcie {
400         pinctrl-names = "default";
401         pinctrl-0 = <&pinctrl_pcie>;
402         reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
403         status = "okay";
404 };
405 
406 &pwm2 {
407         pinctrl-names = "default";
408         pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
409         status = "disabled";
410 };
411 
412 &pwm3 {
413         pinctrl-names = "default";
414         pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
415         status = "disabled";
416 };
417 
418 &pwm4 {
419         pinctrl-names = "default";
420         pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
421         status = "disabled";
422 };
423 
424 &uart1 {
425         pinctrl-names = "default";
426         pinctrl-0 = <&pinctrl_uart1>;
427         status = "okay";
428 };
429 
430 &uart2 {
431         pinctrl-names = "default";
432         pinctrl-0 = <&pinctrl_uart2>;
433         status = "okay";
434 };
435 
436 &uart3 {
437         pinctrl-names = "default";
438         pinctrl-0 = <&pinctrl_uart3>;
439         status = "okay";
440 };
441 
442 &uart5 {
443         pinctrl-names = "default";
444         pinctrl-0 = <&pinctrl_uart5>;
445         status = "okay";
446 };
447 
448 &usbotg {
449         vbus-supply = <&reg_usb_otg_vbus>;
450         pinctrl-names = "default";
451         pinctrl-0 = <&pinctrl_usbotg>;
452         disable-over-current;
453         status = "okay";
454 };
455 
456 &usbh1 {
457         status = "okay";
458 };
459 
460 &wdog1 {
461         pinctrl-names = "default";
462         pinctrl-0 = <&pinctrl_wdog>;
463         fsl,ext-reset-output;
464 };
465 
466 &iomuxc {
467         pinctrl_adv7180: adv7180grp {
468                 fsl,pins = <
469                         MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23        0x0001b0b0
470                         MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20     0x4001b0b0
471                 >;
472         };
473 
474         pinctrl_enet: enetgrp {
475                 fsl,pins = <
476                         MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
477                         MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
478                         MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
479                         MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
480                         MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
481                         MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
482                         MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b030
483                         MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b030
484                         MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b030
485                         MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b030
486                         MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b030
487                         MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b030
488                         MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
489                         MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
490                         MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
491                         MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
492                         MX6QDL_PAD_ENET_TXD0__GPIO1_IO30        0x1b0b0 /* PHY Reset */
493                 >;
494         };
495 
496         pinctrl_gpio_leds: gpioledsgrp {
497                 fsl,pins = <
498                         MX6QDL_PAD_KEY_COL0__GPIO4_IO06         0x1b0b0
499                         MX6QDL_PAD_KEY_ROW0__GPIO4_IO07         0x1b0b0
500                 >;
501         };
502 
503         pinctrl_gpmi_nand: gpminandgrp {
504                 fsl,pins = <
505                         MX6QDL_PAD_NANDF_CLE__NAND_CLE          0xb0b1
506                         MX6QDL_PAD_NANDF_ALE__NAND_ALE          0xb0b1
507                         MX6QDL_PAD_NANDF_WP_B__NAND_WP_B        0xb0b1
508                         MX6QDL_PAD_NANDF_RB0__NAND_READY_B      0xb000
509                         MX6QDL_PAD_NANDF_CS0__NAND_CE0_B        0xb0b1
510                         MX6QDL_PAD_SD4_CMD__NAND_RE_B           0xb0b1
511                         MX6QDL_PAD_SD4_CLK__NAND_WE_B           0xb0b1
512                         MX6QDL_PAD_NANDF_D0__NAND_DATA00        0xb0b1
513                         MX6QDL_PAD_NANDF_D1__NAND_DATA01        0xb0b1
514                         MX6QDL_PAD_NANDF_D2__NAND_DATA02        0xb0b1
515                         MX6QDL_PAD_NANDF_D3__NAND_DATA03        0xb0b1
516                         MX6QDL_PAD_NANDF_D4__NAND_DATA04        0xb0b1
517                         MX6QDL_PAD_NANDF_D5__NAND_DATA05        0xb0b1
518                         MX6QDL_PAD_NANDF_D6__NAND_DATA06        0xb0b1
519                         MX6QDL_PAD_NANDF_D7__NAND_DATA07        0xb0b1
520                 >;
521         };
522 
523         pinctrl_i2c1: i2c1grp {
524                 fsl,pins = <
525                         MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
526                         MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
527                         MX6QDL_PAD_GPIO_4__GPIO1_IO04           0x0001b0b0 /* GSC_IRQ# */
528                 >;
529         };
530 
531         pinctrl_i2c2: i2c2grp {
532                 fsl,pins = <
533                         MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
534                         MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
535                 >;
536         };
537 
538         pinctrl_i2c3: i2c3grp {
539                 fsl,pins = <
540                         MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
541                         MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
542                 >;
543         };
544 
545         pinctrl_ipu1_csi0: ipu1csi0grp {
546                 fsl,pins = <
547                         MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
548                         MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
549                         MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
550                         MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
551                         MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
552                         MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
553                         MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
554                         MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
555                         MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
556                         MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
557                         MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
558                 >;
559         };
560 
561         pinctrl_pcie: pciegrp {
562                 fsl,pins = <
563                         MX6QDL_PAD_GPIO_0__GPIO1_IO00           0x1b0b0
564                 >;
565         };
566 
567         pinctrl_pmic: pmicgrp {
568                 fsl,pins = <
569                         MX6QDL_PAD_GPIO_8__GPIO1_IO08           0x0001b0b0 /* PMIC_IRQ# */
570                 >;
571         };
572 
573         pinctrl_pps: ppsgrp {
574                 fsl,pins = <
575                         MX6QDL_PAD_ENET_RXD1__GPIO1_IO26        0x1b0b1
576                 >;
577         };
578 
579         pinctrl_pwm2: pwm2grp {
580                 fsl,pins = <
581                         MX6QDL_PAD_SD1_DAT2__PWM2_OUT           0x1b0b1
582                 >;
583         };
584 
585         pinctrl_pwm3: pwm3grp {
586                 fsl,pins = <
587                         MX6QDL_PAD_SD1_DAT1__PWM3_OUT           0x1b0b1
588                 >;
589         };
590 
591         pinctrl_pwm4: pwm4grp {
592                 fsl,pins = <
593                         MX6QDL_PAD_SD1_CMD__PWM4_OUT            0x1b0b1
594                 >;
595         };
596 
597         pinctrl_uart1: uart1grp {
598                 fsl,pins = <
599                         MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
600                         MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
601                 >;
602         };
603 
604         pinctrl_uart2: uart2grp {
605                 fsl,pins = <
606                         MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA      0x1b0b1
607                         MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA      0x1b0b1
608                 >;
609         };
610 
611         pinctrl_uart3: uart3grp {
612                 fsl,pins = <
613                         MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
614                         MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
615                 >;
616         };
617 
618         pinctrl_uart5: uart5grp {
619                 fsl,pins = <
620                         MX6QDL_PAD_KEY_COL1__UART5_TX_DATA      0x1b0b1
621                         MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA      0x1b0b1
622                 >;
623         };
624 
625         pinctrl_usbotg: usbotggrp {
626                 fsl,pins = <
627                         MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
628                         MX6QDL_PAD_EIM_D22__GPIO3_IO22          0x1b0b0 /* OTG_PWR_EN */
629                         MX6QDL_PAD_KEY_COL4__USB_OTG_OC         0x17059
630                 >;
631         };
632 
633         pinctrl_wdog: wdoggrp {
634                 fsl,pins = <
635                         MX6QDL_PAD_DISP0_DAT8__WDOG1_B          0x1b0b0
636                 >;
637         };
638 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php