1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /*
3 * Copyright (c) 2014 Protonic Holland
4 */
5
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8
9 / {
10 chosen {
11 stdout-path = &uart4;
12 };
13
14 reg_3v3: regulator-3v3 {
15 compatible = "regulator-fixed";
16 regulator-name = "3v3";
17 regulator-min-microvolt = <3300000>;
18 regulator-max-microvolt = <3300000>;
19 };
20
21 reg_usb_h1_vbus: regulator-h1-vbus {
22 compatible = "regulator-fixed";
23 regulator-name = "h1-vbus";
24 regulator-min-microvolt = <5000000>;
25 regulator-max-microvolt = <5000000>;
26 };
27
28 reg_usb_otg_vbus: regulator-otg-vbus {
29 compatible = "regulator-fixed";
30 regulator-name = "otg-vbus";
31 regulator-min-microvolt = <5000000>;
32 regulator-max-microvolt = <5000000>;
33 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
34 enable-active-high;
35 };
36 };
37
38 &can1 {
39 pinctrl-names = "default";
40 status = "okay";
41 };
42
43 &i2c1 {
44 clock-frequency = <100000>;
45 pinctrl-names = "default";
46 pinctrl-0 = <&pinctrl_i2c1>;
47 status = "okay";
48 };
49
50 &i2c3 {
51 clock-frequency = <100000>;
52 pinctrl-names = "default";
53 pinctrl-0 = <&pinctrl_i2c3>;
54 status = "okay";
55
56 temperature-sensor@70 {
57 compatible = "ti,tmp103";
58 reg = <0x70>;
59 };
60 };
61
62 &uart4 {
63 pinctrl-names = "default";
64 pinctrl-0 = <&pinctrl_uart4>;
65 status = "okay";
66 };
67
68 &usbh1 {
69 vbus-supply = <®_usb_h1_vbus>;
70 phy_type = "utmi";
71 dr_mode = "host";
72 disable-over-current;
73 status = "okay";
74 };
75
76 &usbotg {
77 vbus-supply = <®_usb_otg_vbus>;
78 pinctrl-names = "default";
79 pinctrl-0 = <&pinctrl_usbotg>;
80 phy_type = "utmi";
81 dr_mode = "host";
82 over-current-active-low;
83 status = "okay";
84 };
85
86 &usbphynop1 {
87 status = "disabled";
88 };
89
90 &usbphynop2 {
91 status = "disabled";
92 };
93
94 &usdhc1 {
95 pinctrl-names = "default";
96 pinctrl-0 = <&pinctrl_usdhc1>;
97 cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
98 status = "okay";
99 };
100
101 &usdhc3 {
102 pinctrl-names = "default";
103 pinctrl-0 = <&pinctrl_usdhc3>;
104 bus-width = <8>;
105 non-removable;
106 no-1-8-v;
107 no-sd;
108 no-sdio;
109 status = "okay";
110 };
111
112 &iomuxc {
113 pinctrl_can1: can1grp {
114 fsl,pins = <
115 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b008
116 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b008
117 >;
118 };
119
120 pinctrl_i2c1: i2c1grp {
121 fsl,pins = <
122 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1
123 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1
124 >;
125 };
126
127 pinctrl_i2c3: i2c3grp {
128 fsl,pins = <
129 MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
130 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
131 >;
132 };
133
134 pinctrl_uart4: uart4grp {
135 fsl,pins = <
136 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
137 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
138 >;
139 };
140
141 pinctrl_usdhc1: usdhc1grp {
142 fsl,pins = <
143 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9
144 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9
145 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
146 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
147 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
148 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
149 MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0
150 >;
151 };
152
153 pinctrl_usdhc3: usdhc3grp {
154 fsl,pins = <
155 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099
156 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099
157 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099
158 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099
159 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099
160 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099
161 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099
162 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099
163 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099
164 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099
165 MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1
166 >;
167 };
168
169 pinctrl_usbotg: usbotggrp {
170 fsl,pins = <
171 MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
172 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
173 >;
174 };
175 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.