1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (C) 2014 STMicroelectronics Limited.
4 * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
5 */
6 #include "st-pincfg.h"
7 #include <dt-bindings/interrupt-controller/arm-gic.h>
8 / {
9
10 aliases {
11 /* 0-5: PIO_SBC */
12 gpio0 = &pio0;
13 gpio1 = &pio1;
14 gpio2 = &pio2;
15 gpio3 = &pio3;
16 gpio4 = &pio4;
17 gpio5 = &pio5;
18 /* 10-19: PIO_FRONT0 */
19 gpio6 = &pio10;
20 gpio7 = &pio11;
21 gpio8 = &pio12;
22 gpio9 = &pio13;
23 gpio10 = &pio14;
24 gpio11 = &pio15;
25 gpio12 = &pio16;
26 gpio13 = &pio17;
27 gpio14 = &pio18;
28 gpio15 = &pio19;
29 /* 20: PIO_FRONT1 */
30 gpio16 = &pio20;
31 /* 30-35: PIO_REAR */
32 gpio17 = &pio30;
33 gpio18 = &pio31;
34 gpio19 = &pio32;
35 gpio20 = &pio33;
36 gpio21 = &pio34;
37 gpio22 = &pio35;
38 /* 40-42: PIO_FLASH */
39 gpio23 = &pio40;
40 gpio24 = &pio41;
41 gpio25 = &pio42;
42 };
43
44 soc {
45 pin-controller-sbc@961f080 {
46 #address-cells = <1>;
47 #size-cells = <1>;
48 compatible = "st,stih407-sbc-pinctrl";
49 st,syscfg = <&syscfg_sbc>;
50 reg = <0x0961f080 0x4>;
51 reg-names = "irqmux";
52 interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
53 interrupt-names = "irqmux";
54 ranges = <0 0x09610000 0x6000>;
55
56 pio0: gpio@9610000 {
57 gpio-controller;
58 #gpio-cells = <2>;
59 interrupt-controller;
60 #interrupt-cells = <2>;
61 reg = <0x0 0x100>;
62 st,bank-name = "PIO0";
63 };
64 pio1: gpio@9611000 {
65 gpio-controller;
66 #gpio-cells = <2>;
67 interrupt-controller;
68 #interrupt-cells = <2>;
69 reg = <0x1000 0x100>;
70 st,bank-name = "PIO1";
71 };
72 pio2: gpio@9612000 {
73 gpio-controller;
74 #gpio-cells = <2>;
75 interrupt-controller;
76 #interrupt-cells = <2>;
77 reg = <0x2000 0x100>;
78 st,bank-name = "PIO2";
79 };
80 pio3: gpio@9613000 {
81 gpio-controller;
82 #gpio-cells = <2>;
83 interrupt-controller;
84 #interrupt-cells = <2>;
85 reg = <0x3000 0x100>;
86 st,bank-name = "PIO3";
87 };
88 pio4: gpio@9614000 {
89 gpio-controller;
90 #gpio-cells = <2>;
91 interrupt-controller;
92 #interrupt-cells = <2>;
93 reg = <0x4000 0x100>;
94 st,bank-name = "PIO4";
95 };
96
97 pio5: gpio@9615000 {
98 gpio-controller;
99 #gpio-cells = <2>;
100 interrupt-controller;
101 #interrupt-cells = <2>;
102 reg = <0x5000 0x100>;
103 st,bank-name = "PIO5";
104 st,retime-pin-mask = <0x3f>;
105 };
106
107 cec0 {
108 pinctrl_cec0_default: cec0-default {
109 st,pins {
110 hdmi_cec = <&pio2 4 ALT1 BIDIR>;
111 };
112 };
113 };
114
115 rc {
116 pinctrl_ir: ir0 {
117 st,pins {
118 ir = <&pio4 0 ALT2 IN>;
119 };
120 };
121
122 pinctrl_uhf: uhf0 {
123 st,pins {
124 ir = <&pio4 1 ALT2 IN>;
125 };
126 };
127
128 pinctrl_tx: tx0 {
129 st,pins {
130 tx = <&pio4 2 ALT2 OUT>;
131 };
132 };
133
134 pinctrl_tx_od: tx_od0 {
135 st,pins {
136 tx_od = <&pio4 3 ALT2 OUT>;
137 };
138 };
139 };
140
141 /* SBC_ASC0 - UART10 */
142 sbc_serial0 {
143 pinctrl_sbc_serial0: sbc_serial0-0 {
144 st,pins {
145 tx = <&pio3 4 ALT1 OUT>;
146 rx = <&pio3 5 ALT1 IN>;
147 };
148 };
149 };
150 /* SBC_ASC1 - UART11 */
151 sbc_serial1 {
152 pinctrl_sbc_serial1: sbc_serial1-0 {
153 st,pins {
154 tx = <&pio2 6 ALT3 OUT>;
155 rx = <&pio2 7 ALT3 IN>;
156 };
157 };
158 };
159
160 i2c10 {
161 pinctrl_i2c10_default: i2c10-default {
162 st,pins {
163 sda = <&pio4 6 ALT1 BIDIR>;
164 scl = <&pio4 5 ALT1 BIDIR>;
165 };
166 };
167 };
168
169 i2c11 {
170 pinctrl_i2c11_default: i2c11-default {
171 st,pins {
172 sda = <&pio5 1 ALT1 BIDIR>;
173 scl = <&pio5 0 ALT1 BIDIR>;
174 };
175 };
176 };
177
178 keyscan {
179 pinctrl_keyscan: keyscan {
180 st,pins {
181 keyin0 = <&pio4 0 ALT6 IN>;
182 keyin1 = <&pio4 5 ALT4 IN>;
183 keyin2 = <&pio0 4 ALT2 IN>;
184 keyin3 = <&pio2 6 ALT2 IN>;
185
186 keyout0 = <&pio4 6 ALT4 OUT>;
187 keyout1 = <&pio1 7 ALT2 OUT>;
188 keyout2 = <&pio0 6 ALT2 OUT>;
189 keyout3 = <&pio2 7 ALT2 OUT>;
190 };
191 };
192 };
193
194 gmac1 {
195 /*
196 * Almost all the boards based on STiH407 SoC have an embedded
197 * switch where the mdio/mdc have been used for managing the SMI
198 * iface via I2C. For this reason these lines can be allocated
199 * by using dedicated configuration (in case of there will be a
200 * standard PHY transceiver on-board).
201 */
202 pinctrl_rgmii1: rgmii1-0 {
203 st,pins {
204
205 txd0 = <&pio0 0 ALT1 OUT DE_IO 0 CLK_A>;
206 txd1 = <&pio0 1 ALT1 OUT DE_IO 0 CLK_A>;
207 txd2 = <&pio0 2 ALT1 OUT DE_IO 0 CLK_A>;
208 txd3 = <&pio0 3 ALT1 OUT DE_IO 0 CLK_A>;
209 txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
210 txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
211 rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>;
212 rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>;
213 rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>;
214 rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>;
215 rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>;
216 rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
217 clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
218 phyclk = <&pio2 3 ALT4 OUT NICLK 1250 CLK_B>;
219 };
220 };
221
222 pinctrl_rgmii1_mdio: rgmii1-mdio {
223 st,pins {
224 mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
225 mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
226 mdint = <&pio1 3 ALT1 IN BYPASS 0>;
227 };
228 };
229
230 pinctrl_rgmii1_mdio_1: rgmii1-mdio-1 {
231 st,pins {
232 mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
233 mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
234 };
235 };
236
237 pinctrl_mii1: mii1 {
238 st,pins {
239 txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
240 txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
241 txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
242 txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
243 txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
244 txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
245 txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
246 col = <&pio0 7 ALT1 IN BYPASS 1000>;
247
248 mdio = <&pio1 0 ALT1 OUT BYPASS 1500>;
249 mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
250 crs = <&pio1 2 ALT1 IN BYPASS 1000>;
251 mdint = <&pio1 3 ALT1 IN BYPASS 0>;
252 rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
253 rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
254 rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
255 rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
256
257 rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
258 rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
259 rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
260 phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
261 };
262 };
263
264 pinctrl_rmii1: rmii1-0 {
265 st,pins {
266 txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
267 txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
268 txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
269 mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
270 mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
271 mdint = <&pio1 3 ALT1 IN BYPASS 0>;
272 rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_B>;
273 rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_B>;
274 rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_B>;
275 rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
276 };
277 };
278
279 pinctrl_rmii1_phyclk: rmii1_phyclk {
280 st,pins {
281 phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
282 };
283 };
284
285 pinctrl_rmii1_phyclk_ext: rmii1_phyclk_ext {
286 st,pins {
287 phyclk = <&pio2 3 ALT2 IN NICLK 0 CLK_A>;
288 };
289 };
290 };
291
292 pwm1 {
293 pinctrl_pwm1_chan0_default: pwm1-0-default {
294 st,pins {
295 pwm-out = <&pio3 0 ALT1 OUT>;
296 pwm-capturein = <&pio3 2 ALT1 IN>;
297 };
298 };
299 pinctrl_pwm1_chan1_default: pwm1-1-default {
300 st,pins {
301 pwm-capturein = <&pio4 3 ALT1 IN>;
302 pwm-out = <&pio4 4 ALT1 OUT>;
303 };
304 };
305 pinctrl_pwm1_chan2_default: pwm1-2-default {
306 st,pins {
307 pwm-out = <&pio4 6 ALT3 OUT>;
308 };
309 };
310 pinctrl_pwm1_chan3_default: pwm1-3-default {
311 st,pins {
312 pwm-out = <&pio4 7 ALT3 OUT>;
313 };
314 };
315 };
316
317 spi10 {
318 pinctrl_spi10_default: spi10-4w-alt1-0 {
319 st,pins {
320 mtsr = <&pio4 6 ALT1 OUT>;
321 mrst = <&pio4 7 ALT1 IN>;
322 scl = <&pio4 5 ALT1 OUT>;
323 };
324 };
325
326 pinctrl_spi10_3w_alt1_0: spi10-3w-alt1-0 {
327 st,pins {
328 mtsr = <&pio4 6 ALT1 BIDIR_PU>;
329 scl = <&pio4 5 ALT1 OUT>;
330 };
331 };
332 };
333
334 spi11 {
335 pinctrl_spi11_default: spi11-4w-alt2-0 {
336 st,pins {
337 mtsr = <&pio3 1 ALT2 OUT>;
338 mrst = <&pio3 0 ALT2 IN>;
339 scl = <&pio3 2 ALT2 OUT>;
340 };
341 };
342
343 pinctrl_spi11_3w_alt2_0: spi11-3w-alt2-0 {
344 st,pins {
345 mtsr = <&pio3 1 ALT2 BIDIR_PU>;
346 scl = <&pio3 2 ALT2 OUT>;
347 };
348 };
349 };
350
351 spi12 {
352 pinctrl_spi12_default: spi12-4w-alt2-0 {
353 st,pins {
354 mtsr = <&pio3 6 ALT2 OUT>;
355 mrst = <&pio3 4 ALT2 IN>;
356 scl = <&pio3 7 ALT2 OUT>;
357 };
358 };
359
360 pinctrl_spi12_3w_alt2_0: spi12-3w-alt2-0 {
361 st,pins {
362 mtsr = <&pio3 6 ALT2 BIDIR_PU>;
363 scl = <&pio3 7 ALT2 OUT>;
364 };
365 };
366 };
367 };
368
369 pin-controller-front0@920f080 {
370 #address-cells = <1>;
371 #size-cells = <1>;
372 compatible = "st,stih407-front-pinctrl";
373 st,syscfg = <&syscfg_front>;
374 reg = <0x0920f080 0x4>;
375 reg-names = "irqmux";
376 interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
377 interrupt-names = "irqmux";
378 ranges = <0 0x09200000 0x10000>;
379
380 pio10: pio@9200000 {
381 gpio-controller;
382 #gpio-cells = <2>;
383 interrupt-controller;
384 #interrupt-cells = <2>;
385 reg = <0x0 0x100>;
386 st,bank-name = "PIO10";
387 };
388 pio11: pio@9201000 {
389 gpio-controller;
390 #gpio-cells = <2>;
391 interrupt-controller;
392 #interrupt-cells = <2>;
393 reg = <0x1000 0x100>;
394 st,bank-name = "PIO11";
395 };
396 pio12: pio@9202000 {
397 gpio-controller;
398 #gpio-cells = <2>;
399 interrupt-controller;
400 #interrupt-cells = <2>;
401 reg = <0x2000 0x100>;
402 st,bank-name = "PIO12";
403 };
404 pio13: pio@9203000 {
405 gpio-controller;
406 #gpio-cells = <2>;
407 interrupt-controller;
408 #interrupt-cells = <2>;
409 reg = <0x3000 0x100>;
410 st,bank-name = "PIO13";
411 };
412 pio14: pio@9204000 {
413 gpio-controller;
414 #gpio-cells = <2>;
415 interrupt-controller;
416 #interrupt-cells = <2>;
417 reg = <0x4000 0x100>;
418 st,bank-name = "PIO14";
419 };
420 pio15: pio@9205000 {
421 gpio-controller;
422 #gpio-cells = <2>;
423 interrupt-controller;
424 #interrupt-cells = <2>;
425 reg = <0x5000 0x100>;
426 st,bank-name = "PIO15";
427 };
428 pio16: pio@9206000 {
429 gpio-controller;
430 #gpio-cells = <2>;
431 interrupt-controller;
432 #interrupt-cells = <2>;
433 reg = <0x6000 0x100>;
434 st,bank-name = "PIO16";
435 };
436 pio17: pio@9207000 {
437 gpio-controller;
438 #gpio-cells = <2>;
439 interrupt-controller;
440 #interrupt-cells = <2>;
441 reg = <0x7000 0x100>;
442 st,bank-name = "PIO17";
443 };
444 pio18: pio@9208000 {
445 gpio-controller;
446 #gpio-cells = <2>;
447 interrupt-controller;
448 #interrupt-cells = <2>;
449 reg = <0x8000 0x100>;
450 st,bank-name = "PIO18";
451 };
452 pio19: pio@9209000 {
453 gpio-controller;
454 #gpio-cells = <2>;
455 interrupt-controller;
456 #interrupt-cells = <2>;
457 reg = <0x9000 0x100>;
458 st,bank-name = "PIO19";
459 };
460
461 /* Comms */
462 serial0 {
463 pinctrl_serial0: serial0-0 {
464 st,pins {
465 tx = <&pio17 0 ALT1 OUT>;
466 rx = <&pio17 1 ALT1 IN>;
467 };
468 };
469 pinctrl_serial0_hw_flowctrl: serial0-0_hw_flowctrl {
470 st,pins {
471 tx = <&pio17 0 ALT1 OUT>;
472 rx = <&pio17 1 ALT1 IN>;
473 cts = <&pio17 2 ALT1 IN>;
474 rts = <&pio17 3 ALT1 OUT>;
475 };
476 };
477 };
478
479 serial1 {
480 pinctrl_serial1: serial1-0 {
481 st,pins {
482 tx = <&pio16 0 ALT1 OUT>;
483 rx = <&pio16 1 ALT1 IN>;
484 };
485 };
486 };
487
488 serial2 {
489 pinctrl_serial2: serial2-0 {
490 st,pins {
491 tx = <&pio15 0 ALT1 OUT>;
492 rx = <&pio15 1 ALT1 IN>;
493 };
494 };
495 };
496
497 mmc1 {
498 pinctrl_sd1: sd1-0 {
499 st,pins {
500 sd_clk = <&pio19 3 ALT5 BIDIR NICLK 0 CLK_B>;
501 sd_cmd = <&pio19 2 ALT5 BIDIR_PU BYPASS 0>;
502 sd_dat0 = <&pio19 4 ALT5 BIDIR_PU BYPASS 0>;
503 sd_dat1 = <&pio19 5 ALT5 BIDIR_PU BYPASS 0>;
504 sd_dat2 = <&pio19 6 ALT5 BIDIR_PU BYPASS 0>;
505 sd_dat3 = <&pio19 7 ALT5 BIDIR_PU BYPASS 0>;
506 sd_led = <&pio16 6 ALT6 OUT>;
507 sd_pwren = <&pio16 7 ALT6 OUT>;
508 sd_cd = <&pio19 0 ALT6 IN>;
509 sd_wp = <&pio19 1 ALT6 IN>;
510 };
511 };
512 };
513
514
515 i2c0 {
516 pinctrl_i2c0_default: i2c0-default {
517 st,pins {
518 sda = <&pio10 6 ALT2 BIDIR>;
519 scl = <&pio10 5 ALT2 BIDIR>;
520 };
521 };
522 };
523
524 i2c1 {
525 pinctrl_i2c1_default: i2c1-default {
526 st,pins {
527 sda = <&pio11 1 ALT2 BIDIR>;
528 scl = <&pio11 0 ALT2 BIDIR>;
529 };
530 };
531 };
532
533 i2c2 {
534 pinctrl_i2c2_default: i2c2-default {
535 st,pins {
536 sda = <&pio15 6 ALT2 BIDIR>;
537 scl = <&pio15 5 ALT2 BIDIR>;
538 };
539 };
540
541 pinctrl_i2c2_alt2_1: i2c2-alt2-1 {
542 st,pins {
543 sda = <&pio12 6 ALT2 BIDIR>;
544 scl = <&pio12 5 ALT2 BIDIR>;
545 };
546 };
547 };
548
549 i2c3 {
550 pinctrl_i2c3_default: i2c3-alt1-0 {
551 st,pins {
552 sda = <&pio18 6 ALT1 BIDIR>;
553 scl = <&pio18 5 ALT1 BIDIR>;
554 };
555 };
556 pinctrl_i2c3_alt1_1: i2c3-alt1-1 {
557 st,pins {
558 sda = <&pio17 7 ALT1 BIDIR>;
559 scl = <&pio17 6 ALT1 BIDIR>;
560 };
561 };
562 pinctrl_i2c3_alt3_0: i2c3-alt3-0 {
563 st,pins {
564 sda = <&pio13 6 ALT3 BIDIR>;
565 scl = <&pio13 5 ALT3 BIDIR>;
566 };
567 };
568 };
569
570 spi0 {
571 pinctrl_spi0_default: spi0-4w-alt2-0 {
572 st,pins {
573 mtsr = <&pio10 6 ALT2 OUT>;
574 mrst = <&pio10 7 ALT2 IN>;
575 scl = <&pio10 5 ALT2 OUT>;
576 };
577 };
578
579 pinctrl_spi0_3w_alt2_0: spi0-3w-alt2-0 {
580 st,pins {
581 mtsr = <&pio10 6 ALT2 BIDIR_PU>;
582 scl = <&pio10 5 ALT2 OUT>;
583 };
584 };
585
586 pinctrl_spi0_4w_alt1_0: spi0-4w-alt1-0 {
587 st,pins {
588 mtsr = <&pio19 7 ALT1 OUT>;
589 mrst = <&pio19 5 ALT1 IN>;
590 scl = <&pio19 6 ALT1 OUT>;
591 };
592 };
593
594 pinctrl_spi0_3w_alt1_0: spi0-3w-alt1-0 {
595 st,pins {
596 mtsr = <&pio19 7 ALT1 BIDIR_PU>;
597 scl = <&pio19 6 ALT1 OUT>;
598 };
599 };
600 };
601
602 spi1 {
603 pinctrl_spi1_default: spi1-4w-alt2-0 {
604 st,pins {
605 mtsr = <&pio11 1 ALT2 OUT>;
606 mrst = <&pio11 2 ALT2 IN>;
607 scl = <&pio11 0 ALT2 OUT>;
608 };
609 };
610
611 pinctrl_spi1_3w_alt2_0: spi1-3w-alt2-0 {
612 st,pins {
613 mtsr = <&pio11 1 ALT2 BIDIR_PU>;
614 scl = <&pio11 0 ALT2 OUT>;
615 };
616 };
617
618 pinctrl_spi1_4w_alt1_0: spi1-4w-alt1-0 {
619 st,pins {
620 mtsr = <&pio14 3 ALT1 OUT>;
621 mrst = <&pio14 4 ALT1 IN>;
622 scl = <&pio14 2 ALT1 OUT>;
623 };
624 };
625
626 pinctrl_spi1_3w_alt1_0: spi1-3w-alt1-0 {
627 st,pins {
628 mtsr = <&pio14 3 ALT1 BIDIR_PU>;
629 scl = <&pio14 2 ALT1 OUT>;
630 };
631 };
632 };
633
634 spi2 {
635 pinctrl_spi2_default: spi2-4w-alt2-0 {
636 st,pins {
637 mtsr = <&pio12 6 ALT2 OUT>;
638 mrst = <&pio12 7 ALT2 IN>;
639 scl = <&pio12 5 ALT2 OUT>;
640 };
641 };
642
643 pinctrl_spi2_3w_alt2_0: spi2-3w-alt2-0 {
644 st,pins {
645 mtsr = <&pio12 6 ALT2 BIDIR_PU>;
646 scl = <&pio12 5 ALT2 OUT>;
647 };
648 };
649
650 pinctrl_spi2_4w_alt1_0: spi2-4w-alt1-0 {
651 st,pins {
652 mtsr = <&pio14 6 ALT1 OUT>;
653 mrst = <&pio14 7 ALT1 IN>;
654 scl = <&pio14 5 ALT1 OUT>;
655 };
656 };
657
658 pinctrl_spi2_3w_alt1_0: spi2-3w-alt1-0 {
659 st,pins {
660 mtsr = <&pio14 6 ALT1 BIDIR_PU>;
661 scl = <&pio14 5 ALT1 OUT>;
662 };
663 };
664
665 pinctrl_spi2_4w_alt2_1: spi2-4w-alt2-1 {
666 st,pins {
667 mtsr = <&pio15 6 ALT2 OUT>;
668 mrst = <&pio15 7 ALT2 IN>;
669 scl = <&pio15 5 ALT2 OUT>;
670 };
671 };
672
673 pinctrl_spi2_3w_alt2_1: spi2-3w-alt2-1 {
674 st,pins {
675 mtsr = <&pio15 6 ALT2 BIDIR_PU>;
676 scl = <&pio15 5 ALT2 OUT>;
677 };
678 };
679 };
680
681 spi3 {
682 pinctrl_spi3_default: spi3-4w-alt3-0 {
683 st,pins {
684 mtsr = <&pio13 6 ALT3 OUT>;
685 mrst = <&pio13 7 ALT3 IN>;
686 scl = <&pio13 5 ALT3 OUT>;
687 };
688 };
689
690 pinctrl_spi3_3w_alt3_0: spi3-3w-alt3-0 {
691 st,pins {
692 mtsr = <&pio13 6 ALT3 BIDIR_PU>;
693 scl = <&pio13 5 ALT3 OUT>;
694 };
695 };
696
697 pinctrl_spi3_4w_alt1_0: spi3-4w-alt1-0 {
698 st,pins {
699 mtsr = <&pio17 7 ALT1 OUT>;
700 mrst = <&pio17 5 ALT1 IN>;
701 scl = <&pio17 6 ALT1 OUT>;
702 };
703 };
704
705 pinctrl_spi3_3w_alt1_0: spi3-3w-alt1-0 {
706 st,pins {
707 mtsr = <&pio17 7 ALT1 BIDIR_PU>;
708 scl = <&pio17 6 ALT1 OUT>;
709 };
710 };
711
712 pinctrl_spi3_4w_alt1_1: spi3-4w-alt1-1 {
713 st,pins {
714 mtsr = <&pio18 6 ALT1 OUT>;
715 mrst = <&pio18 7 ALT1 IN>;
716 scl = <&pio18 5 ALT1 OUT>;
717 };
718 };
719
720 pinctrl_spi3_3w_alt1_1: spi3-3w-alt1-1 {
721 st,pins {
722 mtsr = <&pio18 6 ALT1 BIDIR_PU>;
723 scl = <&pio18 5 ALT1 OUT>;
724 };
725 };
726 };
727
728 tsin0 {
729 pinctrl_tsin0_parallel: tsin0_parallel {
730 st,pins {
731 DATA7 = <&pio10 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
732 DATA6 = <&pio10 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
733 DATA5 = <&pio10 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
734 DATA4 = <&pio10 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
735 DATA3 = <&pio11 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
736 DATA2 = <&pio11 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
737 DATA1 = <&pio11 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
738 DATA0 = <&pio11 3 ALT1 IN SE_NICLK_IO 0 CLK_A>;
739 CLKIN = <&pio10 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
740 VALID = <&pio10 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
741 ERROR = <&pio10 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
742 PKCLK = <&pio10 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
743 };
744 };
745 pinctrl_tsin0_serial: tsin0_serial {
746 st,pins {
747 DATA7 = <&pio10 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
748 CLKIN = <&pio10 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
749 VALID = <&pio10 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
750 ERROR = <&pio10 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
751 PKCLK = <&pio10 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
752 };
753 };
754 };
755
756 tsin1 {
757 pinctrl_tsin1_parallel: tsin1_parallel {
758 st,pins {
759 DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
760 DATA6 = <&pio12 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
761 DATA5 = <&pio12 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
762 DATA4 = <&pio12 3 ALT1 IN SE_NICLK_IO 0 CLK_A>;
763 DATA3 = <&pio12 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
764 DATA2 = <&pio12 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
765 DATA1 = <&pio12 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
766 DATA0 = <&pio12 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
767 CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>;
768 VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
769 ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
770 PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
771 };
772 };
773 pinctrl_tsin1_serial: tsin1_serial {
774 st,pins {
775 DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
776 CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>;
777 VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
778 ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
779 PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
780 };
781 };
782 };
783
784 tsin2 {
785 pinctrl_tsin2_parallel: tsin2_parallel {
786 st,pins {
787 DATA7 = <&pio13 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
788 DATA6 = <&pio13 5 ALT2 IN SE_NICLK_IO 0 CLK_B>;
789 DATA5 = <&pio13 6 ALT2 IN SE_NICLK_IO 0 CLK_B>;
790 DATA4 = <&pio13 7 ALT2 IN SE_NICLK_IO 0 CLK_B>;
791 DATA3 = <&pio14 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
792 DATA2 = <&pio14 1 ALT2 IN SE_NICLK_IO 0 CLK_B>;
793 DATA1 = <&pio14 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
794 DATA0 = <&pio14 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
795 CLKIN = <&pio13 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
796 VALID = <&pio13 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
797 ERROR = <&pio13 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
798 PKCLK = <&pio13 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
799 };
800 };
801 pinctrl_tsin2_serial: tsin2_serial {
802 st,pins {
803 DATA7 = <&pio13 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
804 CLKIN = <&pio13 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
805 VALID = <&pio13 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
806 ERROR = <&pio13 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
807 PKCLK = <&pio13 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
808 };
809 };
810 };
811
812 tsin3 {
813 pinctrl_tsin3_serial: tsin3_serial {
814 st,pins {
815 DATA7 = <&pio14 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
816 CLKIN = <&pio14 0 ALT1 IN CLKNOTDATA 0 CLK_A>;
817 VALID = <&pio13 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
818 ERROR = <&pio13 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
819 PKCLK = <&pio13 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
820 };
821 };
822 };
823
824 tsin4 {
825 pinctrl_tsin4_serial_alt3: tsin4_serial_alt3 {
826 st,pins {
827 DATA7 = <&pio14 6 ALT3 IN SE_NICLK_IO 0 CLK_A>;
828 CLKIN = <&pio14 5 ALT3 IN CLKNOTDATA 0 CLK_A>;
829 VALID = <&pio14 3 ALT3 IN SE_NICLK_IO 0 CLK_B>;
830 ERROR = <&pio14 2 ALT3 IN SE_NICLK_IO 0 CLK_B>;
831 PKCLK = <&pio14 4 ALT3 IN SE_NICLK_IO 0 CLK_A>;
832 };
833 };
834 };
835
836 tsin5 {
837 pinctrl_tsin5_serial_alt1: tsin5_serial_alt1 {
838 st,pins {
839 DATA7 = <&pio18 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
840 CLKIN = <&pio18 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
841 VALID = <&pio18 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
842 ERROR = <&pio18 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
843 PKCLK = <&pio18 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
844 };
845 };
846 pinctrl_tsin5_serial_alt2: tsin5_serial_alt2 {
847 st,pins {
848 DATA7 = <&pio19 4 ALT2 IN SE_NICLK_IO 0 CLK_A>;
849 CLKIN = <&pio19 3 ALT2 IN CLKNOTDATA 0 CLK_A>;
850 VALID = <&pio19 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
851 ERROR = <&pio19 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
852 PKCLK = <&pio19 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
853 };
854 };
855 };
856
857 tsout0 {
858 pinctrl_tsout0_parallel: tsout0_parallel {
859 st,pins {
860 DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
861 DATA6 = <&pio12 1 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
862 DATA5 = <&pio12 2 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
863 DATA4 = <&pio12 3 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
864 DATA3 = <&pio12 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
865 DATA2 = <&pio12 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
866 DATA1 = <&pio12 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
867 DATA0 = <&pio12 7 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
868 CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>;
869 VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
870 ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
871 PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
872 };
873 };
874 pinctrl_tsout0_serial: tsout0_serial {
875 st,pins {
876 DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
877 CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>;
878 VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
879 ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
880 PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>;
881 };
882 };
883 };
884
885 tsout1 {
886 pinctrl_tsout1_serial: tsout1_serial {
887 st,pins {
888 DATA7 = <&pio19 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
889 CLKIN = <&pio19 3 ALT1 OUT NICLK 0 CLK_A>;
890 VALID = <&pio19 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
891 ERROR = <&pio19 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
892 PKCLK = <&pio19 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
893 };
894 };
895 };
896
897 mtsin0 {
898 pinctrl_mtsin0_parallel: mtsin0_parallel {
899 st,pins {
900 DATA7 = <&pio10 4 ALT3 IN SE_NICLK_IO 0 CLK_A>;
901 DATA6 = <&pio10 5 ALT3 IN SE_NICLK_IO 0 CLK_A>;
902 DATA5 = <&pio10 6 ALT3 IN SE_NICLK_IO 0 CLK_A>;
903 DATA4 = <&pio10 7 ALT3 IN SE_NICLK_IO 0 CLK_A>;
904 DATA3 = <&pio11 0 ALT3 IN SE_NICLK_IO 0 CLK_A>;
905 DATA2 = <&pio11 1 ALT3 IN SE_NICLK_IO 0 CLK_A>;
906 DATA1 = <&pio11 2 ALT3 IN SE_NICLK_IO 0 CLK_A>;
907 DATA0 = <&pio11 3 ALT3 IN SE_NICLK_IO 0 CLK_A>;
908 CLKIN = <&pio10 3 ALT3 IN CLKNOTDATA 0 CLK_A>;
909 VALID = <&pio10 1 ALT3 IN SE_NICLK_IO 0 CLK_A>;
910 ERROR = <&pio10 0 ALT3 IN SE_NICLK_IO 0 CLK_A>;
911 PKCLK = <&pio10 2 ALT3 IN SE_NICLK_IO 0 CLK_A>;
912 };
913 };
914 };
915
916 systrace {
917 pinctrl_systrace_default: systrace-default {
918 st,pins {
919 trc_data0 = <&pio11 3 ALT5 OUT>;
920 trc_data1 = <&pio11 4 ALT5 OUT>;
921 trc_data2 = <&pio11 5 ALT5 OUT>;
922 trc_data3 = <&pio11 6 ALT5 OUT>;
923 trc_clk = <&pio11 7 ALT5 OUT>;
924 };
925 };
926 };
927 };
928
929 pin-controller-front1@921f080 {
930 #address-cells = <1>;
931 #size-cells = <1>;
932 compatible = "st,stih407-front-pinctrl";
933 st,syscfg = <&syscfg_front>;
934 reg = <0x0921f080 0x4>;
935 reg-names = "irqmux";
936 interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
937 interrupt-names = "irqmux";
938 ranges = <0 0x09210000 0x10000>;
939
940 pio20: pio@9210000 {
941 gpio-controller;
942 #gpio-cells = <2>;
943 interrupt-controller;
944 #interrupt-cells = <2>;
945 reg = <0x0 0x100>;
946 st,bank-name = "PIO20";
947 };
948
949 tsin4 {
950 pinctrl_tsin4_serial_alt1: tsin4_serial_alt1 {
951 st,pins {
952 DATA7 = <&pio20 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
953 CLKIN = <&pio20 3 ALT1 IN CLKNOTDATA 0 CLK_A>;
954 VALID = <&pio20 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
955 ERROR = <&pio20 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
956 PKCLK = <&pio20 2 ALT1 IN SE_NICLK_IO 0 CLK_A>;
957 };
958 };
959 };
960 };
961
962 pin-controller-rear@922f080 {
963 #address-cells = <1>;
964 #size-cells = <1>;
965 compatible = "st,stih407-rear-pinctrl";
966 st,syscfg = <&syscfg_rear>;
967 reg = <0x0922f080 0x4>;
968 reg-names = "irqmux";
969 interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
970 interrupt-names = "irqmux";
971 ranges = <0 0x09220000 0x6000>;
972
973 pio30: gpio@9220000 {
974 gpio-controller;
975 #gpio-cells = <2>;
976 interrupt-controller;
977 #interrupt-cells = <2>;
978 reg = <0x0 0x100>;
979 st,bank-name = "PIO30";
980 };
981 pio31: gpio@9221000 {
982 gpio-controller;
983 #gpio-cells = <2>;
984 interrupt-controller;
985 #interrupt-cells = <2>;
986 reg = <0x1000 0x100>;
987 st,bank-name = "PIO31";
988 };
989 pio32: gpio@9222000 {
990 gpio-controller;
991 #gpio-cells = <2>;
992 interrupt-controller;
993 #interrupt-cells = <2>;
994 reg = <0x2000 0x100>;
995 st,bank-name = "PIO32";
996 };
997 pio33: gpio@9223000 {
998 gpio-controller;
999 #gpio-cells = <2>;
1000 interrupt-controller;
1001 #interrupt-cells = <2>;
1002 reg = <0x3000 0x100>;
1003 st,bank-name = "PIO33";
1004 };
1005 pio34: gpio@9224000 {
1006 gpio-controller;
1007 #gpio-cells = <2>;
1008 interrupt-controller;
1009 #interrupt-cells = <2>;
1010 reg = <0x4000 0x100>;
1011 st,bank-name = "PIO34";
1012 };
1013 pio35: gpio@9225000 {
1014 gpio-controller;
1015 #gpio-cells = <2>;
1016 interrupt-controller;
1017 #interrupt-cells = <2>;
1018 reg = <0x5000 0x100>;
1019 st,bank-name = "PIO35";
1020 st,retime-pin-mask = <0x7f>;
1021 };
1022
1023 i2c4 {
1024 pinctrl_i2c4_default: i2c4-default {
1025 st,pins {
1026 sda = <&pio30 1 ALT1 BIDIR>;
1027 scl = <&pio30 0 ALT1 BIDIR>;
1028 };
1029 };
1030 };
1031
1032 i2c5 {
1033 pinctrl_i2c5_default: i2c5-default {
1034 st,pins {
1035 sda = <&pio34 4 ALT1 BIDIR>;
1036 scl = <&pio34 3 ALT1 BIDIR>;
1037 };
1038 };
1039 };
1040
1041 usb3 {
1042 pinctrl_usb3: usb3-2 {
1043 st,pins {
1044 usb-oc-detect = <&pio35 4 ALT1 IN>;
1045 usb-pwr-enable = <&pio35 5 ALT1 OUT>;
1046 usb-vbus-valid = <&pio35 6 ALT1 IN>;
1047 };
1048 };
1049 };
1050
1051 pwm0 {
1052 pinctrl_pwm0_chan0_default: pwm0-0-default {
1053 st,pins {
1054 pwm-capturein = <&pio31 0 ALT1 IN>;
1055 pwm-out = <&pio31 1 ALT1 OUT>;
1056 };
1057 };
1058 };
1059
1060 spi4 {
1061 pinctrl_spi4_default: spi4-4w-alt1-0 {
1062 st,pins {
1063 mtsr = <&pio30 1 ALT1 OUT>;
1064 mrst = <&pio30 2 ALT1 IN>;
1065 scl = <&pio30 0 ALT1 OUT>;
1066 };
1067 };
1068
1069 pinctrl_spi4_3w_alt1_0: spi4-3w-alt1-0 {
1070 st,pins {
1071 mtsr = <&pio30 1 ALT1 BIDIR_PU>;
1072 scl = <&pio30 0 ALT1 OUT>;
1073 };
1074 };
1075
1076 pinctrl_spi4_4w_alt3_0: spi4-4w-alt3-0 {
1077 st,pins {
1078 mtsr = <&pio34 1 ALT3 OUT>;
1079 mrst = <&pio34 2 ALT3 IN>;
1080 scl = <&pio34 0 ALT3 OUT>;
1081 };
1082 };
1083
1084 pinctrl_spi4_3w_alt3_0: spi4-3w-alt3-0 {
1085 st,pins {
1086 mtsr = <&pio34 1 ALT3 BIDIR_PU>;
1087 scl = <&pio34 0 ALT3 OUT>;
1088 };
1089 };
1090 };
1091
1092 i2s_out {
1093 pinctrl_i2s_8ch_out: i2s_8ch_out {
1094 st,pins {
1095 mclk = <&pio33 5 ALT1 OUT>;
1096 lrclk = <&pio33 7 ALT1 OUT>;
1097 sclk = <&pio33 6 ALT1 OUT>;
1098 data0 = <&pio33 4 ALT1 OUT>;
1099 data1 = <&pio34 0 ALT1 OUT>;
1100 data2 = <&pio34 1 ALT1 OUT>;
1101 data3 = <&pio34 2 ALT1 OUT>;
1102 };
1103 };
1104
1105 pinctrl_i2s_2ch_out: i2s_2ch_out {
1106 st,pins {
1107 mclk = <&pio33 5 ALT1 OUT>;
1108 lrclk = <&pio33 7 ALT1 OUT>;
1109 sclk = <&pio33 6 ALT1 OUT>;
1110 data0 = <&pio33 4 ALT1 OUT>;
1111 };
1112 };
1113 };
1114
1115 i2s_in {
1116 pinctrl_i2s_8ch_in: i2s_8ch_in {
1117 st,pins {
1118 mclk = <&pio32 5 ALT1 IN>;
1119 lrclk = <&pio32 7 ALT1 IN>;
1120 sclk = <&pio32 6 ALT1 IN>;
1121 data0 = <&pio32 4 ALT1 IN>;
1122 data1 = <&pio33 0 ALT1 IN>;
1123 data2 = <&pio33 1 ALT1 IN>;
1124 data3 = <&pio33 2 ALT1 IN>;
1125 data4 = <&pio33 3 ALT1 IN>;
1126 };
1127 };
1128
1129 pinctrl_i2s_2ch_in: i2s_2ch_in {
1130 st,pins {
1131 mclk = <&pio32 5 ALT1 IN>;
1132 lrclk = <&pio32 7 ALT1 IN>;
1133 sclk = <&pio32 6 ALT1 IN>;
1134 data0 = <&pio32 4 ALT1 IN>;
1135 };
1136 };
1137 };
1138
1139 spdif_out {
1140 pinctrl_spdif_out: spdif_out {
1141 st,pins {
1142 spdif_out = <&pio34 7 ALT1 OUT>;
1143 };
1144 };
1145 };
1146
1147 serial3 {
1148 pinctrl_serial3: serial3-0 {
1149 st,pins {
1150 tx = <&pio31 3 ALT1 OUT>;
1151 rx = <&pio31 4 ALT1 IN>;
1152 };
1153 };
1154 };
1155 };
1156
1157 pin-controller-flash@923f080 {
1158 #address-cells = <1>;
1159 #size-cells = <1>;
1160 compatible = "st,stih407-flash-pinctrl";
1161 st,syscfg = <&syscfg_flash>;
1162 reg = <0x0923f080 0x4>;
1163 reg-names = "irqmux";
1164 interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
1165 interrupt-names = "irqmux";
1166 ranges = <0 0x09230000 0x3000>;
1167
1168 pio40: gpio@9230000 {
1169 gpio-controller;
1170 #gpio-cells = <2>;
1171 interrupt-controller;
1172 #interrupt-cells = <2>;
1173 reg = <0 0x100>;
1174 st,bank-name = "PIO40";
1175 };
1176 pio41: gpio@9231000 {
1177 gpio-controller;
1178 #gpio-cells = <2>;
1179 interrupt-controller;
1180 #interrupt-cells = <2>;
1181 reg = <0x1000 0x100>;
1182 st,bank-name = "PIO41";
1183 };
1184 pio42: gpio@9232000 {
1185 gpio-controller;
1186 #gpio-cells = <2>;
1187 interrupt-controller;
1188 #interrupt-cells = <2>;
1189 reg = <0x2000 0x100>;
1190 st,bank-name = "PIO42";
1191 };
1192
1193 mmc0 {
1194 pinctrl_mmc0: mmc0-0 {
1195 st,pins {
1196 emmc_clk = <&pio40 6 ALT1 BIDIR>;
1197 emmc_cmd = <&pio40 7 ALT1 BIDIR_PU>;
1198 emmc_d0 = <&pio41 0 ALT1 BIDIR_PU>;
1199 emmc_d1 = <&pio41 1 ALT1 BIDIR_PU>;
1200 emmc_d2 = <&pio41 2 ALT1 BIDIR_PU>;
1201 emmc_d3 = <&pio41 3 ALT1 BIDIR_PU>;
1202 emmc_d4 = <&pio41 4 ALT1 BIDIR_PU>;
1203 emmc_d5 = <&pio41 5 ALT1 BIDIR_PU>;
1204 emmc_d6 = <&pio41 6 ALT1 BIDIR_PU>;
1205 emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>;
1206 };
1207 };
1208 pinctrl_sd0: sd0-0 {
1209 st,pins {
1210 sd_clk = <&pio40 6 ALT1 BIDIR>;
1211 sd_cmd = <&pio40 7 ALT1 BIDIR_PU>;
1212 sd_dat0 = <&pio41 0 ALT1 BIDIR_PU>;
1213 sd_dat1 = <&pio41 1 ALT1 BIDIR_PU>;
1214 sd_dat2 = <&pio41 2 ALT1 BIDIR_PU>;
1215 sd_dat3 = <&pio41 3 ALT1 BIDIR_PU>;
1216 sd_led = <&pio42 0 ALT2 OUT>;
1217 sd_pwren = <&pio42 2 ALT2 OUT>;
1218 sd_vsel = <&pio42 3 ALT2 OUT>;
1219 sd_cd = <&pio42 4 ALT2 IN>;
1220 sd_wp = <&pio42 5 ALT2 IN>;
1221 };
1222 };
1223 };
1224
1225 fsm {
1226 pinctrl_fsm: fsm {
1227 st,pins {
1228 spi-fsm-clk = <&pio40 1 ALT1 OUT>;
1229 spi-fsm-cs = <&pio40 0 ALT1 OUT>;
1230 spi-fsm-mosi = <&pio40 2 ALT1 OUT>;
1231 spi-fsm-miso = <&pio40 3 ALT1 IN>;
1232 spi-fsm-hol = <&pio40 5 ALT1 OUT>;
1233 spi-fsm-wp = <&pio40 4 ALT1 OUT>;
1234 };
1235 };
1236 };
1237
1238 nand {
1239 pinctrl_nand: nand {
1240 st,pins {
1241 nand_cs1 = <&pio40 6 ALT3 OUT>;
1242 nand_cs0 = <&pio40 7 ALT3 OUT>;
1243 nand_d0 = <&pio41 0 ALT3 BIDIR>;
1244 nand_d1 = <&pio41 1 ALT3 BIDIR>;
1245 nand_d2 = <&pio41 2 ALT3 BIDIR>;
1246 nand_d3 = <&pio41 3 ALT3 BIDIR>;
1247 nand_d4 = <&pio41 4 ALT3 BIDIR>;
1248 nand_d5 = <&pio41 5 ALT3 BIDIR>;
1249 nand_d6 = <&pio41 6 ALT3 BIDIR>;
1250 nand_d7 = <&pio41 7 ALT3 BIDIR>;
1251 nand_we = <&pio42 0 ALT3 OUT>;
1252 nand_dqs = <&pio42 1 ALT3 OUT>;
1253 nand_ale = <&pio42 2 ALT3 OUT>;
1254 nand_cle = <&pio42 3 ALT3 OUT>;
1255 nand_rnb = <&pio42 4 ALT3 IN>;
1256 nand_oe = <&pio42 5 ALT3 OUT>;
1257 };
1258 };
1259 };
1260 };
1261 };
1262 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.