1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * arch/arm/mach-at91/pm.c
4 * AT91 Power Management
5 *
6 * Copyright (C) 2005 David Brownell
7 */
8
9 #include <linux/genalloc.h>
10 #include <linux/io.h>
11 #include <linux/of_address.h>
12 #include <linux/of.h>
13 #include <linux/of_fdt.h>
14 #include <linux/of_platform.h>
15 #include <linux/platform_device.h>
16 #include <linux/parser.h>
17 #include <linux/suspend.h>
18
19 #include <linux/clk.h>
20 #include <linux/clk/at91_pmc.h>
21 #include <linux/platform_data/atmel.h>
22
23 #include <asm/cacheflush.h>
24 #include <asm/fncpy.h>
25 #include <asm/system_misc.h>
26 #include <asm/suspend.h>
27
28 #include "generic.h"
29 #include "pm.h"
30 #include "sam_secure.h"
31
32 #define BACKUP_DDR_PHY_CALIBRATION (9)
33
34 /**
35 * struct at91_pm_bu - AT91 power management backup unit data structure
36 * @suspended: true if suspended to backup mode
37 * @reserved: reserved
38 * @canary: canary data for memory checking after exit from backup mode
39 * @resume: resume API
40 * @ddr_phy_calibration: DDR PHY calibration data: ZQ0CR0, first 8 words
41 * of the memory
42 */
43 struct at91_pm_bu {
44 int suspended;
45 unsigned long reserved;
46 phys_addr_t canary;
47 phys_addr_t resume;
48 unsigned long ddr_phy_calibration[BACKUP_DDR_PHY_CALIBRATION];
49 };
50
51 /**
52 * struct at91_pm_sfrbu_regs - registers mapping for SFRBU
53 * @pswbu: power switch BU control registers
54 */
55 struct at91_pm_sfrbu_regs {
56 struct {
57 u32 key;
58 u32 ctrl;
59 u32 state;
60 u32 softsw;
61 } pswbu;
62 };
63
64 /**
65 * enum at91_pm_eth_clk - Ethernet clock indexes
66 * @AT91_PM_ETH_PCLK: pclk index
67 * @AT91_PM_ETH_HCLK: hclk index
68 * @AT91_PM_ETH_MAX_CLK: max index
69 */
70 enum at91_pm_eth_clk {
71 AT91_PM_ETH_PCLK,
72 AT91_PM_ETH_HCLK,
73 AT91_PM_ETH_MAX_CLK,
74 };
75
76 /**
77 * enum at91_pm_eth - Ethernet controller indexes
78 * @AT91_PM_G_ETH: gigabit Ethernet controller index
79 * @AT91_PM_E_ETH: megabit Ethernet controller index
80 * @AT91_PM_MAX_ETH: max index
81 */
82 enum at91_pm_eth {
83 AT91_PM_G_ETH,
84 AT91_PM_E_ETH,
85 AT91_PM_MAX_ETH,
86 };
87
88 /**
89 * struct at91_pm_quirk_eth - AT91 PM Ethernet quirks
90 * @dev: Ethernet device
91 * @np: Ethernet device node
92 * @clks: Ethernet clocks
93 * @modes: power management mode that this quirk applies to
94 * @dns_modes: do not suspend modes: stop suspending if Ethernet is configured
95 * as wakeup source but buggy and no other wakeup source is
96 * available
97 */
98 struct at91_pm_quirk_eth {
99 struct device *dev;
100 struct device_node *np;
101 struct clk_bulk_data clks[AT91_PM_ETH_MAX_CLK];
102 u32 modes;
103 u32 dns_modes;
104 };
105
106 /**
107 * struct at91_pm_quirks - AT91 PM quirks
108 * @eth: Ethernet quirks
109 */
110 struct at91_pm_quirks {
111 struct at91_pm_quirk_eth eth[AT91_PM_MAX_ETH];
112 };
113
114 /**
115 * struct at91_soc_pm - AT91 SoC power management data structure
116 * @config_shdwc_ws: wakeup sources configuration function for SHDWC
117 * @config_pmc_ws: wakeup srouces configuration function for PMC
118 * @ws_ids: wakup sources of_device_id array
119 * @bu: backup unit mapped data (for backup mode)
120 * @quirks: PM quirks
121 * @data: PM data to be used on last phase of suspend
122 * @sfrbu_regs: SFRBU registers mapping
123 * @memcs: memory chip select
124 */
125 struct at91_soc_pm {
126 int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity);
127 int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity);
128 const struct of_device_id *ws_ids;
129 struct at91_pm_bu *bu;
130 struct at91_pm_quirks quirks;
131 struct at91_pm_data data;
132 struct at91_pm_sfrbu_regs sfrbu_regs;
133 void *memcs;
134 };
135
136 /**
137 * enum at91_pm_iomaps - IOs that needs to be mapped for different PM modes
138 * @AT91_PM_IOMAP_SHDWC: SHDWC controller
139 * @AT91_PM_IOMAP_SFRBU: SFRBU controller
140 * @AT91_PM_IOMAP_ETHC: Ethernet controller
141 */
142 enum at91_pm_iomaps {
143 AT91_PM_IOMAP_SHDWC,
144 AT91_PM_IOMAP_SFRBU,
145 AT91_PM_IOMAP_ETHC,
146 };
147
148 #define AT91_PM_IOMAP(name) BIT(AT91_PM_IOMAP_##name)
149
150 static struct at91_soc_pm soc_pm = {
151 .data = {
152 .standby_mode = AT91_PM_STANDBY,
153 .suspend_mode = AT91_PM_ULP0,
154 },
155 };
156
157 static const match_table_t pm_modes __initconst = {
158 { AT91_PM_STANDBY, "standby" },
159 { AT91_PM_ULP0, "ulp0" },
160 { AT91_PM_ULP0_FAST, "ulp0-fast" },
161 { AT91_PM_ULP1, "ulp1" },
162 { AT91_PM_BACKUP, "backup" },
163 { -1, NULL },
164 };
165
166 #define at91_ramc_read(id, field) \
167 __raw_readl(soc_pm.data.ramc[id] + field)
168
169 #define at91_ramc_write(id, field, value) \
170 __raw_writel(value, soc_pm.data.ramc[id] + field)
171
172 static int at91_pm_valid_state(suspend_state_t state)
173 {
174 switch (state) {
175 case PM_SUSPEND_ON:
176 case PM_SUSPEND_STANDBY:
177 case PM_SUSPEND_MEM:
178 return 1;
179
180 default:
181 return 0;
182 }
183 }
184
185 static int canary = 0xA5A5A5A5;
186
187 struct wakeup_source_info {
188 unsigned int pmc_fsmr_bit;
189 unsigned int shdwc_mr_bit;
190 bool set_polarity;
191 };
192
193 static const struct wakeup_source_info ws_info[] = {
194 { .pmc_fsmr_bit = AT91_PMC_FSTT(10), .set_polarity = true },
195 { .pmc_fsmr_bit = AT91_PMC_RTCAL, .shdwc_mr_bit = BIT(17) },
196 { .pmc_fsmr_bit = AT91_PMC_USBAL },
197 { .pmc_fsmr_bit = AT91_PMC_SDMMC_CD },
198 { .pmc_fsmr_bit = AT91_PMC_RTTAL },
199 { .pmc_fsmr_bit = AT91_PMC_RXLP_MCE },
200 };
201
202 static const struct of_device_id sama5d2_ws_ids[] = {
203 { .compatible = "atmel,sama5d2-gem", .data = &ws_info[0] },
204 { .compatible = "atmel,sama5d2-rtc", .data = &ws_info[1] },
205 { .compatible = "atmel,sama5d3-udc", .data = &ws_info[2] },
206 { .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] },
207 { .compatible = "usb-ohci", .data = &ws_info[2] },
208 { .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] },
209 { .compatible = "usb-ehci", .data = &ws_info[2] },
210 { .compatible = "atmel,sama5d2-sdhci", .data = &ws_info[3] },
211 { /* sentinel */ }
212 };
213
214 static const struct of_device_id sam9x60_ws_ids[] = {
215 { .compatible = "microchip,sam9x60-rtc", .data = &ws_info[1] },
216 { .compatible = "atmel,at91rm9200-ohci", .data = &ws_info[2] },
217 { .compatible = "usb-ohci", .data = &ws_info[2] },
218 { .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] },
219 { .compatible = "usb-ehci", .data = &ws_info[2] },
220 { .compatible = "microchip,sam9x60-rtt", .data = &ws_info[4] },
221 { .compatible = "cdns,sam9x60-macb", .data = &ws_info[5] },
222 { /* sentinel */ }
223 };
224
225 static const struct of_device_id sama7g5_ws_ids[] = {
226 { .compatible = "microchip,sama7g5-rtc", .data = &ws_info[1] },
227 { .compatible = "microchip,sama7g5-ohci", .data = &ws_info[2] },
228 { .compatible = "usb-ohci", .data = &ws_info[2] },
229 { .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] },
230 { .compatible = "usb-ehci", .data = &ws_info[2] },
231 { .compatible = "microchip,sama7g5-sdhci", .data = &ws_info[3] },
232 { .compatible = "microchip,sama7g5-rtt", .data = &ws_info[4] },
233 { /* sentinel */ }
234 };
235
236 static int at91_pm_config_ws(unsigned int pm_mode, bool set)
237 {
238 const struct wakeup_source_info *wsi;
239 const struct of_device_id *match;
240 struct platform_device *pdev;
241 struct device_node *np;
242 unsigned int mode = 0, polarity = 0, val = 0;
243
244 if (pm_mode != AT91_PM_ULP1)
245 return 0;
246
247 if (!soc_pm.data.pmc || !soc_pm.data.shdwc || !soc_pm.ws_ids)
248 return -EPERM;
249
250 if (!set) {
251 writel(mode, soc_pm.data.pmc + AT91_PMC_FSMR);
252 return 0;
253 }
254
255 if (soc_pm.config_shdwc_ws)
256 soc_pm.config_shdwc_ws(soc_pm.data.shdwc, &mode, &polarity);
257
258 /* SHDWC.MR */
259 val = readl(soc_pm.data.shdwc + 0x04);
260
261 /* Loop through defined wakeup sources. */
262 for_each_matching_node_and_match(np, soc_pm.ws_ids, &match) {
263 pdev = of_find_device_by_node(np);
264 if (!pdev)
265 continue;
266
267 if (device_may_wakeup(&pdev->dev)) {
268 wsi = match->data;
269
270 /* Check if enabled on SHDWC. */
271 if (wsi->shdwc_mr_bit && !(val & wsi->shdwc_mr_bit))
272 goto put_device;
273
274 mode |= wsi->pmc_fsmr_bit;
275 if (wsi->set_polarity)
276 polarity |= wsi->pmc_fsmr_bit;
277 }
278
279 put_device:
280 put_device(&pdev->dev);
281 }
282
283 if (mode) {
284 if (soc_pm.config_pmc_ws)
285 soc_pm.config_pmc_ws(soc_pm.data.pmc, mode, polarity);
286 } else {
287 pr_err("AT91: PM: no ULP1 wakeup sources found!");
288 }
289
290 return mode ? 0 : -EPERM;
291 }
292
293 static int at91_sama5d2_config_shdwc_ws(void __iomem *shdwc, u32 *mode,
294 u32 *polarity)
295 {
296 u32 val;
297
298 /* SHDWC.WUIR */
299 val = readl(shdwc + 0x0c);
300 *mode |= (val & 0x3ff);
301 *polarity |= ((val >> 16) & 0x3ff);
302
303 return 0;
304 }
305
306 static int at91_sama5d2_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity)
307 {
308 writel(mode, pmc + AT91_PMC_FSMR);
309 writel(polarity, pmc + AT91_PMC_FSPR);
310
311 return 0;
312 }
313
314 static int at91_sam9x60_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity)
315 {
316 writel(mode, pmc + AT91_PMC_FSMR);
317
318 return 0;
319 }
320
321 static bool at91_pm_eth_quirk_is_valid(struct at91_pm_quirk_eth *eth)
322 {
323 struct platform_device *pdev;
324
325 /* Interface NA in DT. */
326 if (!eth->np)
327 return false;
328
329 /* No quirks for this interface and current suspend mode. */
330 if (!(eth->modes & BIT(soc_pm.data.mode)))
331 return false;
332
333 if (!eth->dev) {
334 /* Driver not probed. */
335 pdev = of_find_device_by_node(eth->np);
336 if (!pdev)
337 return false;
338 /* put_device(eth->dev) is called at the end of suspend. */
339 eth->dev = &pdev->dev;
340 }
341
342 /* No quirks if device isn't a wakeup source. */
343 if (!device_may_wakeup(eth->dev))
344 return false;
345
346 return true;
347 }
348
349 static int at91_pm_config_quirks(bool suspend)
350 {
351 struct at91_pm_quirk_eth *eth;
352 int i, j, ret, tmp;
353
354 /*
355 * Ethernet IPs who's device_node pointers are stored into
356 * soc_pm.quirks.eth[].np cannot handle WoL packets while in ULP0, ULP1
357 * or both due to a hardware bug. If they receive WoL packets while in
358 * ULP0 or ULP1 IPs could stop working or the whole system could stop
359 * working. We cannot handle this scenario in the ethernet driver itself
360 * as the driver is common to multiple vendors and also we only know
361 * here, in this file, if we suspend to ULP0 or ULP1 mode. Thus handle
362 * these scenarios here, as quirks.
363 */
364 for (i = 0; i < AT91_PM_MAX_ETH; i++) {
365 eth = &soc_pm.quirks.eth[i];
366
367 if (!at91_pm_eth_quirk_is_valid(eth))
368 continue;
369
370 /*
371 * For modes in dns_modes mask the system blocks if quirk is not
372 * applied but if applied the interface doesn't act at WoL
373 * events. Thus take care to avoid suspending if this interface
374 * is the only configured wakeup source.
375 */
376 if (suspend && eth->dns_modes & BIT(soc_pm.data.mode)) {
377 int ws_count = 0;
378 #ifdef CONFIG_PM_SLEEP
379 struct wakeup_source *ws;
380
381 for_each_wakeup_source(ws) {
382 if (ws->dev == eth->dev)
383 continue;
384
385 ws_count++;
386 break;
387 }
388 #endif
389
390 /*
391 * Checking !ws is good for all platforms with issues
392 * even when both G_ETH and E_ETH are available as dns_modes
393 * is populated only on G_ETH interface.
394 */
395 if (!ws_count) {
396 pr_err("AT91: PM: Ethernet cannot resume from WoL!");
397 ret = -EPERM;
398 put_device(eth->dev);
399 eth->dev = NULL;
400 /* No need to revert clock settings for this eth. */
401 i--;
402 goto clk_unconfigure;
403 }
404 }
405
406 if (suspend) {
407 clk_bulk_disable_unprepare(AT91_PM_ETH_MAX_CLK, eth->clks);
408 } else {
409 ret = clk_bulk_prepare_enable(AT91_PM_ETH_MAX_CLK,
410 eth->clks);
411 if (ret)
412 goto clk_unconfigure;
413 /*
414 * Release the reference to eth->dev taken in
415 * at91_pm_eth_quirk_is_valid().
416 */
417 put_device(eth->dev);
418 eth->dev = NULL;
419 }
420 }
421
422 return 0;
423
424 clk_unconfigure:
425 /*
426 * In case of resume we reach this point if clk_prepare_enable() failed.
427 * we don't want to revert the previous clk_prepare_enable() for the
428 * other IP.
429 */
430 for (j = i; j >= 0; j--) {
431 eth = &soc_pm.quirks.eth[j];
432 if (suspend) {
433 if (!at91_pm_eth_quirk_is_valid(eth))
434 continue;
435
436 tmp = clk_bulk_prepare_enable(AT91_PM_ETH_MAX_CLK, eth->clks);
437 if (tmp) {
438 pr_err("AT91: PM: failed to enable %s clocks\n",
439 j == AT91_PM_G_ETH ? "geth" : "eth");
440 }
441 }
442
443 /*
444 * Release the reference to eth->dev taken in
445 * at91_pm_eth_quirk_is_valid().
446 */
447 put_device(eth->dev);
448 eth->dev = NULL;
449 }
450
451 return ret;
452 }
453
454 /*
455 * Called after processes are frozen, but before we shutdown devices.
456 */
457 static int at91_pm_begin(suspend_state_t state)
458 {
459 int ret;
460
461 switch (state) {
462 case PM_SUSPEND_MEM:
463 soc_pm.data.mode = soc_pm.data.suspend_mode;
464 break;
465
466 case PM_SUSPEND_STANDBY:
467 soc_pm.data.mode = soc_pm.data.standby_mode;
468 break;
469
470 default:
471 soc_pm.data.mode = -1;
472 }
473
474 ret = at91_pm_config_ws(soc_pm.data.mode, true);
475 if (ret)
476 return ret;
477
478 if (soc_pm.data.mode == AT91_PM_BACKUP)
479 soc_pm.bu->suspended = 1;
480 else if (soc_pm.bu)
481 soc_pm.bu->suspended = 0;
482
483 return 0;
484 }
485
486 /*
487 * Verify that all the clocks are correct before entering
488 * slow-clock mode.
489 */
490 static int at91_pm_verify_clocks(void)
491 {
492 unsigned long scsr;
493 int i;
494
495 scsr = readl(soc_pm.data.pmc + AT91_PMC_SCSR);
496
497 /* USB must not be using PLLB */
498 if ((scsr & soc_pm.data.uhp_udp_mask) != 0) {
499 pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
500 return 0;
501 }
502
503 /* PCK0..PCK3 must be disabled, or configured to use clk32k */
504 for (i = 0; i < 4; i++) {
505 u32 css;
506
507 if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
508 continue;
509 css = readl(soc_pm.data.pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
510 if (css != AT91_PMC_CSS_SLOW) {
511 pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
512 return 0;
513 }
514 }
515
516 return 1;
517 }
518
519 /*
520 * Call this from platform driver suspend() to see how deeply to suspend.
521 * For example, some controllers (like OHCI) need one of the PLL clocks
522 * in order to act as a wakeup source, and those are not available when
523 * going into slow clock mode.
524 *
525 * REVISIT: generalize as clk_will_be_available(clk)? Other platforms have
526 * the very same problem (but not using at91 main_clk), and it'd be better
527 * to add one generic API rather than lots of platform-specific ones.
528 */
529 int at91_suspend_entering_slow_clock(void)
530 {
531 return (soc_pm.data.mode >= AT91_PM_ULP0);
532 }
533 EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
534
535 static void (*at91_suspend_sram_fn)(struct at91_pm_data *);
536 extern void at91_pm_suspend_in_sram(struct at91_pm_data *pm_data);
537 extern u32 at91_pm_suspend_in_sram_sz;
538
539 static int at91_suspend_finish(unsigned long val)
540 {
541 unsigned char modified_gray_code[] = {
542 0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05, 0x0c, 0x0d,
543 0x0e, 0x0f, 0x0a, 0x0b, 0x08, 0x09, 0x18, 0x19, 0x1a, 0x1b,
544 0x1e, 0x1f, 0x1c, 0x1d, 0x14, 0x15, 0x16, 0x17, 0x12, 0x13,
545 0x10, 0x11,
546 };
547 unsigned int tmp, index;
548 int i;
549
550 if (soc_pm.data.mode == AT91_PM_BACKUP && soc_pm.data.ramc_phy) {
551 /*
552 * Bootloader will perform DDR recalibration and will try to
553 * restore the ZQ0SR0 with the value saved here. But the
554 * calibration is buggy and restoring some values from ZQ0SR0
555 * is forbidden and risky thus we need to provide processed
556 * values for these (modified gray code values).
557 */
558 tmp = readl(soc_pm.data.ramc_phy + DDR3PHY_ZQ0SR0);
559
560 /* Store pull-down output impedance select. */
561 index = (tmp >> DDR3PHY_ZQ0SR0_PDO_OFF) & 0x1f;
562 soc_pm.bu->ddr_phy_calibration[0] = modified_gray_code[index];
563
564 /* Store pull-up output impedance select. */
565 index = (tmp >> DDR3PHY_ZQ0SR0_PUO_OFF) & 0x1f;
566 soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
567
568 /* Store pull-down on-die termination impedance select. */
569 index = (tmp >> DDR3PHY_ZQ0SR0_PDODT_OFF) & 0x1f;
570 soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
571
572 /* Store pull-up on-die termination impedance select. */
573 index = (tmp >> DDR3PHY_ZQ0SRO_PUODT_OFF) & 0x1f;
574 soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
575
576 /*
577 * The 1st 8 words of memory might get corrupted in the process
578 * of DDR PHY recalibration; it is saved here in securam and it
579 * will be restored later, after recalibration, by bootloader
580 */
581 for (i = 1; i < BACKUP_DDR_PHY_CALIBRATION; i++)
582 soc_pm.bu->ddr_phy_calibration[i] =
583 *((unsigned int *)soc_pm.memcs + (i - 1));
584 }
585
586 flush_cache_all();
587 outer_disable();
588
589 at91_suspend_sram_fn(&soc_pm.data);
590
591 return 0;
592 }
593
594 static void at91_pm_switch_ba_to_vbat(void)
595 {
596 unsigned int offset = offsetof(struct at91_pm_sfrbu_regs, pswbu);
597 unsigned int val;
598
599 /* Just for safety. */
600 if (!soc_pm.data.sfrbu)
601 return;
602
603 val = readl(soc_pm.data.sfrbu + offset);
604
605 /* Already on VBAT. */
606 if (!(val & soc_pm.sfrbu_regs.pswbu.state))
607 return;
608
609 val &= ~soc_pm.sfrbu_regs.pswbu.softsw;
610 val |= soc_pm.sfrbu_regs.pswbu.key | soc_pm.sfrbu_regs.pswbu.ctrl;
611 writel(val, soc_pm.data.sfrbu + offset);
612
613 /* Wait for update. */
614 val = readl(soc_pm.data.sfrbu + offset);
615 while (val & soc_pm.sfrbu_regs.pswbu.state)
616 val = readl(soc_pm.data.sfrbu + offset);
617 }
618
619 static void at91_pm_suspend(suspend_state_t state)
620 {
621 if (soc_pm.data.mode == AT91_PM_BACKUP) {
622 at91_pm_switch_ba_to_vbat();
623
624 cpu_suspend(0, at91_suspend_finish);
625
626 /* The SRAM is lost between suspend cycles */
627 at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
628 &at91_pm_suspend_in_sram,
629 at91_pm_suspend_in_sram_sz);
630 } else {
631 at91_suspend_finish(0);
632 }
633
634 outer_resume();
635 }
636
637 /*
638 * STANDBY mode has *all* drivers suspended; ignores irqs not marked as 'wakeup'
639 * event sources; and reduces DRAM power. But otherwise it's identical to
640 * PM_SUSPEND_ON: cpu idle, and nothing fancy done with main or cpu clocks.
641 *
642 * AT91_PM_ULP0 is like STANDBY plus slow clock mode, so drivers must
643 * suspend more deeply, the master clock switches to the clk32k and turns off
644 * the main oscillator
645 *
646 * AT91_PM_BACKUP turns off the whole SoC after placing the DDR in self refresh
647 */
648 static int at91_pm_enter(suspend_state_t state)
649 {
650 int ret;
651
652 ret = at91_pm_config_quirks(true);
653 if (ret)
654 return ret;
655
656 switch (state) {
657 case PM_SUSPEND_MEM:
658 case PM_SUSPEND_STANDBY:
659 /*
660 * Ensure that clocks are in a valid state.
661 */
662 if (soc_pm.data.mode >= AT91_PM_ULP0 &&
663 !at91_pm_verify_clocks())
664 goto error;
665
666 at91_pm_suspend(state);
667
668 break;
669
670 case PM_SUSPEND_ON:
671 cpu_do_idle();
672 break;
673
674 default:
675 pr_debug("AT91: PM - bogus suspend state %d\n", state);
676 goto error;
677 }
678
679 error:
680 at91_pm_config_quirks(false);
681 return 0;
682 }
683
684 /*
685 * Called right prior to thawing processes.
686 */
687 static void at91_pm_end(void)
688 {
689 at91_pm_config_ws(soc_pm.data.mode, false);
690 }
691
692
693 static const struct platform_suspend_ops at91_pm_ops = {
694 .valid = at91_pm_valid_state,
695 .begin = at91_pm_begin,
696 .enter = at91_pm_enter,
697 .end = at91_pm_end,
698 };
699
700 static struct platform_device at91_cpuidle_device = {
701 .name = "cpuidle-at91",
702 };
703
704 /*
705 * The AT91RM9200 goes into self-refresh mode with this command, and will
706 * terminate self-refresh automatically on the next SDRAM access.
707 *
708 * Self-refresh mode is exited as soon as a memory access is made, but we don't
709 * know for sure when that happens. However, we need to restore the low-power
710 * mode if it was enabled before going idle. Restoring low-power mode while
711 * still in self-refresh is "not recommended", but seems to work.
712 */
713 static void at91rm9200_standby(void)
714 {
715 asm volatile(
716 "b 1f\n\t"
717 ".align 5\n\t"
718 "1: mcr p15, 0, %0, c7, c10, 4\n\t"
719 " str %2, [%1, %3]\n\t"
720 " mcr p15, 0, %0, c7, c0, 4\n\t"
721 :
722 : "r" (0), "r" (soc_pm.data.ramc[0]),
723 "r" (1), "r" (AT91_MC_SDRAMC_SRR));
724 }
725
726 /* We manage both DDRAM/SDRAM controllers, we need more than one value to
727 * remember.
728 */
729 static void at91_ddr_standby(void)
730 {
731 /* Those two values allow us to delay self-refresh activation
732 * to the maximum. */
733 u32 lpr0, lpr1 = 0;
734 u32 mdr, saved_mdr0, saved_mdr1 = 0;
735 u32 saved_lpr0, saved_lpr1 = 0;
736
737 /* LPDDR1 --> force DDR2 mode during self-refresh */
738 saved_mdr0 = at91_ramc_read(0, AT91_DDRSDRC_MDR);
739 if ((saved_mdr0 & AT91_DDRSDRC_MD) == AT91_DDRSDRC_MD_LOW_POWER_DDR) {
740 mdr = saved_mdr0 & ~AT91_DDRSDRC_MD;
741 mdr |= AT91_DDRSDRC_MD_DDR2;
742 at91_ramc_write(0, AT91_DDRSDRC_MDR, mdr);
743 }
744
745 if (soc_pm.data.ramc[1]) {
746 saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
747 lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
748 lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
749 saved_mdr1 = at91_ramc_read(1, AT91_DDRSDRC_MDR);
750 if ((saved_mdr1 & AT91_DDRSDRC_MD) == AT91_DDRSDRC_MD_LOW_POWER_DDR) {
751 mdr = saved_mdr1 & ~AT91_DDRSDRC_MD;
752 mdr |= AT91_DDRSDRC_MD_DDR2;
753 at91_ramc_write(1, AT91_DDRSDRC_MDR, mdr);
754 }
755 }
756
757 saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
758 lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
759 lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
760
761 /* self-refresh mode now */
762 at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
763 if (soc_pm.data.ramc[1])
764 at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
765
766 cpu_do_idle();
767
768 at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr0);
769 at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
770 if (soc_pm.data.ramc[1]) {
771 at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr1);
772 at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
773 }
774 }
775
776 static void sama5d3_ddr_standby(void)
777 {
778 u32 lpr0;
779 u32 saved_lpr0;
780
781 saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
782 lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
783 lpr0 |= AT91_DDRSDRC_LPCB_POWER_DOWN;
784
785 at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
786
787 cpu_do_idle();
788
789 at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
790 }
791
792 /* We manage both DDRAM/SDRAM controllers, we need more than one value to
793 * remember.
794 */
795 static void at91sam9_sdram_standby(void)
796 {
797 u32 lpr0, lpr1 = 0;
798 u32 saved_lpr0, saved_lpr1 = 0;
799
800 if (soc_pm.data.ramc[1]) {
801 saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
802 lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
803 lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
804 }
805
806 saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
807 lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
808 lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
809
810 /* self-refresh mode now */
811 at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
812 if (soc_pm.data.ramc[1])
813 at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
814
815 cpu_do_idle();
816
817 at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
818 if (soc_pm.data.ramc[1])
819 at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
820 }
821
822 static void sama7g5_standby(void)
823 {
824 int pwrtmg, ratio;
825
826 pwrtmg = readl(soc_pm.data.ramc[0] + UDDRC_PWRCTL);
827 ratio = readl(soc_pm.data.pmc + AT91_PMC_RATIO);
828
829 /*
830 * Place RAM into self-refresh after a maximum idle clocks. The maximum
831 * idle clocks is configured by bootloader in
832 * UDDRC_PWRMGT.SELFREF_TO_X32.
833 */
834 writel(pwrtmg | UDDRC_PWRCTL_SELFREF_EN,
835 soc_pm.data.ramc[0] + UDDRC_PWRCTL);
836 /* Divide CPU clock by 16. */
837 writel(ratio & ~AT91_PMC_RATIO_RATIO, soc_pm.data.pmc + AT91_PMC_RATIO);
838
839 cpu_do_idle();
840
841 /* Restore previous configuration. */
842 writel(ratio, soc_pm.data.pmc + AT91_PMC_RATIO);
843 writel(pwrtmg, soc_pm.data.ramc[0] + UDDRC_PWRCTL);
844 }
845
846 struct ramc_info {
847 void (*idle)(void);
848 unsigned int memctrl;
849 };
850
851 static const struct ramc_info ramc_infos[] __initconst = {
852 { .idle = at91rm9200_standby, .memctrl = AT91_MEMCTRL_MC},
853 { .idle = at91sam9_sdram_standby, .memctrl = AT91_MEMCTRL_SDRAMC},
854 { .idle = at91_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
855 { .idle = sama5d3_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
856 { .idle = sama7g5_standby, },
857 };
858
859 static const struct of_device_id ramc_ids[] __initconst = {
860 { .compatible = "atmel,at91rm9200-sdramc", .data = &ramc_infos[0] },
861 { .compatible = "atmel,at91sam9260-sdramc", .data = &ramc_infos[1] },
862 { .compatible = "atmel,at91sam9g45-ddramc", .data = &ramc_infos[2] },
863 { .compatible = "atmel,sama5d3-ddramc", .data = &ramc_infos[3] },
864 { .compatible = "microchip,sama7g5-uddrc", .data = &ramc_infos[4], },
865 { /*sentinel*/ }
866 };
867
868 static const struct of_device_id ramc_phy_ids[] __initconst = {
869 { .compatible = "microchip,sama7g5-ddr3phy", },
870 { /* Sentinel. */ },
871 };
872
873 static __init int at91_dt_ramc(bool phy_mandatory)
874 {
875 struct device_node *np;
876 const struct of_device_id *of_id;
877 int idx = 0;
878 void *standby = NULL;
879 const struct ramc_info *ramc;
880 int ret;
881
882 for_each_matching_node_and_match(np, ramc_ids, &of_id) {
883 soc_pm.data.ramc[idx] = of_iomap(np, 0);
884 if (!soc_pm.data.ramc[idx]) {
885 pr_err("unable to map ramc[%d] cpu registers\n", idx);
886 ret = -ENOMEM;
887 of_node_put(np);
888 goto unmap_ramc;
889 }
890
891 ramc = of_id->data;
892 if (ramc) {
893 if (!standby)
894 standby = ramc->idle;
895 soc_pm.data.memctrl = ramc->memctrl;
896 }
897
898 idx++;
899 }
900
901 if (!idx) {
902 pr_err("unable to find compatible ram controller node in dtb\n");
903 ret = -ENODEV;
904 goto unmap_ramc;
905 }
906
907 /* Lookup for DDR PHY node, if any. */
908 for_each_matching_node_and_match(np, ramc_phy_ids, &of_id) {
909 soc_pm.data.ramc_phy = of_iomap(np, 0);
910 if (!soc_pm.data.ramc_phy) {
911 pr_err("unable to map ramc phy cpu registers\n");
912 ret = -ENOMEM;
913 of_node_put(np);
914 goto unmap_ramc;
915 }
916 }
917
918 if (phy_mandatory && !soc_pm.data.ramc_phy) {
919 pr_err("DDR PHY is mandatory!\n");
920 ret = -ENODEV;
921 goto unmap_ramc;
922 }
923
924 if (!standby) {
925 pr_warn("ramc no standby function available\n");
926 return 0;
927 }
928
929 at91_cpuidle_device.dev.platform_data = standby;
930
931 return 0;
932
933 unmap_ramc:
934 while (idx)
935 iounmap(soc_pm.data.ramc[--idx]);
936
937 return ret;
938 }
939
940 static void at91rm9200_idle(void)
941 {
942 /*
943 * Disable the processor clock. The processor will be automatically
944 * re-enabled by an interrupt or by a reset.
945 */
946 writel(AT91_PMC_PCK, soc_pm.data.pmc + AT91_PMC_SCDR);
947 }
948
949 static void at91sam9_idle(void)
950 {
951 writel(AT91_PMC_PCK, soc_pm.data.pmc + AT91_PMC_SCDR);
952 cpu_do_idle();
953 }
954
955 static void __init at91_pm_sram_init(void)
956 {
957 struct gen_pool *sram_pool;
958 phys_addr_t sram_pbase;
959 unsigned long sram_base;
960 struct device_node *node;
961 struct platform_device *pdev = NULL;
962
963 for_each_compatible_node(node, NULL, "mmio-sram") {
964 pdev = of_find_device_by_node(node);
965 if (pdev) {
966 of_node_put(node);
967 break;
968 }
969 }
970
971 if (!pdev) {
972 pr_warn("%s: failed to find sram device!\n", __func__);
973 return;
974 }
975
976 sram_pool = gen_pool_get(&pdev->dev, NULL);
977 if (!sram_pool) {
978 pr_warn("%s: sram pool unavailable!\n", __func__);
979 goto out_put_device;
980 }
981
982 sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz);
983 if (!sram_base) {
984 pr_warn("%s: unable to alloc sram!\n", __func__);
985 goto out_put_device;
986 }
987
988 sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
989 at91_suspend_sram_fn = __arm_ioremap_exec(sram_pbase,
990 at91_pm_suspend_in_sram_sz, false);
991 if (!at91_suspend_sram_fn) {
992 pr_warn("SRAM: Could not map\n");
993 goto out_put_device;
994 }
995
996 /* Copy the pm suspend handler to SRAM */
997 at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
998 &at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
999 return;
1000
1001 out_put_device:
1002 put_device(&pdev->dev);
1003 return;
1004 }
1005
1006 static bool __init at91_is_pm_mode_active(int pm_mode)
1007 {
1008 return (soc_pm.data.standby_mode == pm_mode ||
1009 soc_pm.data.suspend_mode == pm_mode);
1010 }
1011
1012 static int __init at91_pm_backup_scan_memcs(unsigned long node,
1013 const char *uname, int depth,
1014 void *data)
1015 {
1016 const char *type;
1017 const __be32 *reg;
1018 int *located = data;
1019 int size;
1020
1021 /* Memory node already located. */
1022 if (*located)
1023 return 0;
1024
1025 type = of_get_flat_dt_prop(node, "device_type", NULL);
1026
1027 /* We are scanning "memory" nodes only. */
1028 if (!type || strcmp(type, "memory"))
1029 return 0;
1030
1031 reg = of_get_flat_dt_prop(node, "reg", &size);
1032 if (reg) {
1033 soc_pm.memcs = __va((phys_addr_t)be32_to_cpu(*reg));
1034 *located = 1;
1035 }
1036
1037 return 0;
1038 }
1039
1040 static int __init at91_pm_backup_init(void)
1041 {
1042 struct gen_pool *sram_pool;
1043 struct device_node *np;
1044 struct platform_device *pdev;
1045 int ret = -ENODEV, located = 0;
1046
1047 if (!IS_ENABLED(CONFIG_SOC_SAMA5D2) &&
1048 !IS_ENABLED(CONFIG_SOC_SAMA7G5))
1049 return -EPERM;
1050
1051 if (!at91_is_pm_mode_active(AT91_PM_BACKUP))
1052 return 0;
1053
1054 np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam");
1055 if (!np)
1056 return ret;
1057
1058 pdev = of_find_device_by_node(np);
1059 of_node_put(np);
1060 if (!pdev) {
1061 pr_warn("%s: failed to find securam device!\n", __func__);
1062 return ret;
1063 }
1064
1065 sram_pool = gen_pool_get(&pdev->dev, NULL);
1066 if (!sram_pool) {
1067 pr_warn("%s: securam pool unavailable!\n", __func__);
1068 goto securam_fail;
1069 }
1070
1071 soc_pm.bu = (void *)gen_pool_alloc(sram_pool, sizeof(struct at91_pm_bu));
1072 if (!soc_pm.bu) {
1073 pr_warn("%s: unable to alloc securam!\n", __func__);
1074 ret = -ENOMEM;
1075 goto securam_fail;
1076 }
1077
1078 soc_pm.bu->suspended = 0;
1079 soc_pm.bu->canary = __pa_symbol(&canary);
1080 soc_pm.bu->resume = __pa_symbol(cpu_resume);
1081 if (soc_pm.data.ramc_phy) {
1082 of_scan_flat_dt(at91_pm_backup_scan_memcs, &located);
1083 if (!located)
1084 goto securam_fail;
1085 }
1086
1087 return 0;
1088
1089 securam_fail:
1090 put_device(&pdev->dev);
1091 return ret;
1092 }
1093
1094 static void __init at91_pm_secure_init(void)
1095 {
1096 int suspend_mode;
1097 struct arm_smccc_res res;
1098
1099 suspend_mode = soc_pm.data.suspend_mode;
1100
1101 res = sam_smccc_call(SAMA5_SMC_SIP_SET_SUSPEND_MODE,
1102 suspend_mode, 0);
1103 if (res.a0 == 0) {
1104 pr_info("AT91: Secure PM: suspend mode set to %s\n",
1105 pm_modes[suspend_mode].pattern);
1106 soc_pm.data.mode = suspend_mode;
1107 return;
1108 }
1109
1110 pr_warn("AT91: Secure PM: %s mode not supported !\n",
1111 pm_modes[suspend_mode].pattern);
1112
1113 res = sam_smccc_call(SAMA5_SMC_SIP_GET_SUSPEND_MODE, 0, 0);
1114 if (res.a0 == 0) {
1115 pr_warn("AT91: Secure PM: failed to get default mode\n");
1116 soc_pm.data.mode = -1;
1117 return;
1118 }
1119
1120 pr_info("AT91: Secure PM: using default suspend mode %s\n",
1121 pm_modes[suspend_mode].pattern);
1122
1123 soc_pm.data.suspend_mode = res.a1;
1124 soc_pm.data.mode = soc_pm.data.suspend_mode;
1125 }
1126 static const struct of_device_id atmel_shdwc_ids[] = {
1127 { .compatible = "atmel,sama5d2-shdwc" },
1128 { .compatible = "microchip,sam9x60-shdwc" },
1129 { .compatible = "microchip,sama7g5-shdwc" },
1130 { /* sentinel. */ }
1131 };
1132
1133 static const struct of_device_id gmac_ids[] __initconst = {
1134 { .compatible = "atmel,sama5d3-gem" },
1135 { .compatible = "atmel,sama5d2-gem" },
1136 { .compatible = "atmel,sama5d29-gem" },
1137 { .compatible = "microchip,sama7g5-gem" },
1138 { },
1139 };
1140
1141 static const struct of_device_id emac_ids[] __initconst = {
1142 { .compatible = "atmel,sama5d3-macb" },
1143 { .compatible = "microchip,sama7g5-emac" },
1144 { },
1145 };
1146
1147 /*
1148 * Replaces _mode_to_replace with a supported mode that doesn't depend
1149 * on controller pointed by _map_bitmask
1150 * @_maps: u32 array containing AT91_PM_IOMAP() flags and indexed by AT91
1151 * PM mode
1152 * @_map_bitmask: AT91_PM_IOMAP() bitmask; if _mode_to_replace depends on
1153 * controller represented by _map_bitmask, _mode_to_replace needs to be
1154 * updated
1155 * @_mode_to_replace: standby_mode or suspend_mode that need to be
1156 * updated
1157 * @_mode_to_check: standby_mode or suspend_mode; this is needed here
1158 * to avoid having standby_mode and suspend_mode set with the same AT91
1159 * PM mode
1160 */
1161 #define AT91_PM_REPLACE_MODE(_maps, _map_bitmask, _mode_to_replace, \
1162 _mode_to_check) \
1163 do { \
1164 if (((_maps)[(_mode_to_replace)]) & (_map_bitmask)) { \
1165 int _mode_to_use, _mode_complementary; \
1166 /* Use ULP0 if it doesn't need _map_bitmask. */ \
1167 if (!((_maps)[AT91_PM_ULP0] & (_map_bitmask))) {\
1168 _mode_to_use = AT91_PM_ULP0; \
1169 _mode_complementary = AT91_PM_STANDBY; \
1170 } else { \
1171 _mode_to_use = AT91_PM_STANDBY; \
1172 _mode_complementary = AT91_PM_STANDBY; \
1173 } \
1174 \
1175 if ((_mode_to_check) != _mode_to_use) \
1176 (_mode_to_replace) = _mode_to_use; \
1177 else \
1178 (_mode_to_replace) = _mode_complementary;\
1179 } \
1180 } while (0)
1181
1182 /*
1183 * Replaces standby and suspend modes with default supported modes:
1184 * ULP0 and STANDBY.
1185 * @_maps: u32 array indexed by AT91 PM mode containing AT91_PM_IOMAP()
1186 * flags
1187 * @_map: controller specific name; standby and suspend mode need to be
1188 * replaced in order to not depend on this controller
1189 */
1190 #define AT91_PM_REPLACE_MODES(_maps, _map) \
1191 do { \
1192 AT91_PM_REPLACE_MODE((_maps), BIT(AT91_PM_IOMAP_##_map),\
1193 (soc_pm.data.standby_mode), \
1194 (soc_pm.data.suspend_mode)); \
1195 AT91_PM_REPLACE_MODE((_maps), BIT(AT91_PM_IOMAP_##_map),\
1196 (soc_pm.data.suspend_mode), \
1197 (soc_pm.data.standby_mode)); \
1198 } while (0)
1199
1200 static int __init at91_pm_get_eth_clks(struct device_node *np,
1201 struct clk_bulk_data *clks)
1202 {
1203 clks[AT91_PM_ETH_PCLK].clk = of_clk_get_by_name(np, "pclk");
1204 if (IS_ERR(clks[AT91_PM_ETH_PCLK].clk))
1205 return PTR_ERR(clks[AT91_PM_ETH_PCLK].clk);
1206
1207 clks[AT91_PM_ETH_HCLK].clk = of_clk_get_by_name(np, "hclk");
1208 if (IS_ERR(clks[AT91_PM_ETH_HCLK].clk))
1209 return PTR_ERR(clks[AT91_PM_ETH_HCLK].clk);
1210
1211 return 0;
1212 }
1213
1214 static int __init at91_pm_eth_clks_empty(struct clk_bulk_data *clks)
1215 {
1216 return IS_ERR(clks[AT91_PM_ETH_PCLK].clk) ||
1217 IS_ERR(clks[AT91_PM_ETH_HCLK].clk);
1218 }
1219
1220 static void __init at91_pm_modes_init(const u32 *maps, int len)
1221 {
1222 struct at91_pm_quirk_eth *gmac = &soc_pm.quirks.eth[AT91_PM_G_ETH];
1223 struct at91_pm_quirk_eth *emac = &soc_pm.quirks.eth[AT91_PM_E_ETH];
1224 struct device_node *np;
1225 int ret;
1226
1227 ret = at91_pm_backup_init();
1228 if (ret) {
1229 if (soc_pm.data.standby_mode == AT91_PM_BACKUP)
1230 soc_pm.data.standby_mode = AT91_PM_ULP0;
1231 if (soc_pm.data.suspend_mode == AT91_PM_BACKUP)
1232 soc_pm.data.suspend_mode = AT91_PM_ULP0;
1233 }
1234
1235 if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC) ||
1236 maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SHDWC)) {
1237 np = of_find_matching_node(NULL, atmel_shdwc_ids);
1238 if (!np) {
1239 pr_warn("%s: failed to find shdwc!\n", __func__);
1240 AT91_PM_REPLACE_MODES(maps, SHDWC);
1241 } else {
1242 soc_pm.data.shdwc = of_iomap(np, 0);
1243 of_node_put(np);
1244 }
1245 }
1246
1247 if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SFRBU) ||
1248 maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SFRBU)) {
1249 np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu");
1250 if (!np) {
1251 pr_warn("%s: failed to find sfrbu!\n", __func__);
1252 AT91_PM_REPLACE_MODES(maps, SFRBU);
1253 } else {
1254 soc_pm.data.sfrbu = of_iomap(np, 0);
1255 of_node_put(np);
1256 }
1257 }
1258
1259 if ((at91_is_pm_mode_active(AT91_PM_ULP1) ||
1260 at91_is_pm_mode_active(AT91_PM_ULP0) ||
1261 at91_is_pm_mode_active(AT91_PM_ULP0_FAST)) &&
1262 (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(ETHC) ||
1263 maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(ETHC))) {
1264 np = of_find_matching_node(NULL, gmac_ids);
1265 if (!np) {
1266 np = of_find_matching_node(NULL, emac_ids);
1267 if (np)
1268 goto get_emac_clks;
1269 AT91_PM_REPLACE_MODES(maps, ETHC);
1270 goto unmap_unused_nodes;
1271 } else {
1272 gmac->np = np;
1273 at91_pm_get_eth_clks(np, gmac->clks);
1274 }
1275
1276 np = of_find_matching_node(NULL, emac_ids);
1277 if (!np) {
1278 if (at91_pm_eth_clks_empty(gmac->clks))
1279 AT91_PM_REPLACE_MODES(maps, ETHC);
1280 } else {
1281 get_emac_clks:
1282 emac->np = np;
1283 ret = at91_pm_get_eth_clks(np, emac->clks);
1284 if (ret && at91_pm_eth_clks_empty(gmac->clks)) {
1285 of_node_put(gmac->np);
1286 of_node_put(emac->np);
1287 gmac->np = NULL;
1288 emac->np = NULL;
1289 }
1290 }
1291 }
1292
1293 unmap_unused_nodes:
1294 /* Unmap all unnecessary. */
1295 if (soc_pm.data.shdwc &&
1296 !(maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC) ||
1297 maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SHDWC))) {
1298 iounmap(soc_pm.data.shdwc);
1299 soc_pm.data.shdwc = NULL;
1300 }
1301
1302 if (soc_pm.data.sfrbu &&
1303 !(maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SFRBU) ||
1304 maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SFRBU))) {
1305 iounmap(soc_pm.data.sfrbu);
1306 soc_pm.data.sfrbu = NULL;
1307 }
1308
1309 return;
1310 }
1311
1312 struct pmc_info {
1313 unsigned long uhp_udp_mask;
1314 unsigned long mckr;
1315 unsigned long version;
1316 };
1317
1318 static const struct pmc_info pmc_infos[] __initconst = {
1319 {
1320 .uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP,
1321 .mckr = 0x30,
1322 .version = AT91_PMC_V1,
1323 },
1324
1325 {
1326 .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
1327 .mckr = 0x30,
1328 .version = AT91_PMC_V1,
1329 },
1330 {
1331 .uhp_udp_mask = AT91SAM926x_PMC_UHP,
1332 .mckr = 0x30,
1333 .version = AT91_PMC_V1,
1334 },
1335 { .uhp_udp_mask = 0,
1336 .mckr = 0x30,
1337 .version = AT91_PMC_V1,
1338 },
1339 {
1340 .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
1341 .mckr = 0x28,
1342 .version = AT91_PMC_V2,
1343 },
1344 {
1345 .mckr = 0x28,
1346 .version = AT91_PMC_V2,
1347 },
1348
1349 };
1350
1351 static const struct of_device_id atmel_pmc_ids[] __initconst = {
1352 { .compatible = "atmel,at91rm9200-pmc", .data = &pmc_infos[0] },
1353 { .compatible = "atmel,at91sam9260-pmc", .data = &pmc_infos[1] },
1354 { .compatible = "atmel,at91sam9261-pmc", .data = &pmc_infos[1] },
1355 { .compatible = "atmel,at91sam9263-pmc", .data = &pmc_infos[1] },
1356 { .compatible = "atmel,at91sam9g45-pmc", .data = &pmc_infos[2] },
1357 { .compatible = "atmel,at91sam9n12-pmc", .data = &pmc_infos[1] },
1358 { .compatible = "atmel,at91sam9rl-pmc", .data = &pmc_infos[3] },
1359 { .compatible = "atmel,at91sam9x5-pmc", .data = &pmc_infos[1] },
1360 { .compatible = "atmel,sama5d3-pmc", .data = &pmc_infos[1] },
1361 { .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] },
1362 { .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
1363 { .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] },
1364 { .compatible = "microchip,sama7g5-pmc", .data = &pmc_infos[5] },
1365 { /* sentinel */ },
1366 };
1367
1368 static void __init at91_pm_modes_validate(const int *modes, int len)
1369 {
1370 u8 i, standby = 0, suspend = 0;
1371 int mode;
1372
1373 for (i = 0; i < len; i++) {
1374 if (standby && suspend)
1375 break;
1376
1377 if (modes[i] == soc_pm.data.standby_mode && !standby) {
1378 standby = 1;
1379 continue;
1380 }
1381
1382 if (modes[i] == soc_pm.data.suspend_mode && !suspend) {
1383 suspend = 1;
1384 continue;
1385 }
1386 }
1387
1388 if (!standby) {
1389 if (soc_pm.data.suspend_mode == AT91_PM_STANDBY)
1390 mode = AT91_PM_ULP0;
1391 else
1392 mode = AT91_PM_STANDBY;
1393
1394 pr_warn("AT91: PM: %s mode not supported! Using %s.\n",
1395 pm_modes[soc_pm.data.standby_mode].pattern,
1396 pm_modes[mode].pattern);
1397 soc_pm.data.standby_mode = mode;
1398 }
1399
1400 if (!suspend) {
1401 if (soc_pm.data.standby_mode == AT91_PM_ULP0)
1402 mode = AT91_PM_STANDBY;
1403 else
1404 mode = AT91_PM_ULP0;
1405
1406 pr_warn("AT91: PM: %s mode not supported! Using %s.\n",
1407 pm_modes[soc_pm.data.suspend_mode].pattern,
1408 pm_modes[mode].pattern);
1409 soc_pm.data.suspend_mode = mode;
1410 }
1411 }
1412
1413 static void __init at91_pm_init(void (*pm_idle)(void))
1414 {
1415 struct device_node *pmc_np;
1416 const struct of_device_id *of_id;
1417 const struct pmc_info *pmc;
1418
1419 if (at91_cpuidle_device.dev.platform_data)
1420 platform_device_register(&at91_cpuidle_device);
1421
1422 pmc_np = of_find_matching_node_and_match(NULL, atmel_pmc_ids, &of_id);
1423 soc_pm.data.pmc = of_iomap(pmc_np, 0);
1424 of_node_put(pmc_np);
1425 if (!soc_pm.data.pmc) {
1426 pr_err("AT91: PM not supported, PMC not found\n");
1427 return;
1428 }
1429
1430 pmc = of_id->data;
1431 soc_pm.data.uhp_udp_mask = pmc->uhp_udp_mask;
1432 soc_pm.data.pmc_mckr_offset = pmc->mckr;
1433 soc_pm.data.pmc_version = pmc->version;
1434
1435 if (pm_idle)
1436 arm_pm_idle = pm_idle;
1437
1438 at91_pm_sram_init();
1439
1440 if (at91_suspend_sram_fn) {
1441 suspend_set_ops(&at91_pm_ops);
1442 pr_info("AT91: PM: standby: %s, suspend: %s\n",
1443 pm_modes[soc_pm.data.standby_mode].pattern,
1444 pm_modes[soc_pm.data.suspend_mode].pattern);
1445 } else {
1446 pr_info("AT91: PM not supported, due to no SRAM allocated\n");
1447 }
1448 }
1449
1450 void __init at91rm9200_pm_init(void)
1451 {
1452 int ret;
1453
1454 if (!IS_ENABLED(CONFIG_SOC_AT91RM9200))
1455 return;
1456
1457 /*
1458 * Force STANDBY and ULP0 mode to avoid calling
1459 * at91_pm_modes_validate() which may increase booting time.
1460 * Platform supports anyway only STANDBY and ULP0 modes.
1461 */
1462 soc_pm.data.standby_mode = AT91_PM_STANDBY;
1463 soc_pm.data.suspend_mode = AT91_PM_ULP0;
1464
1465 ret = at91_dt_ramc(false);
1466 if (ret)
1467 return;
1468
1469 /*
1470 * AT91RM9200 SDRAM low-power mode cannot be used with self-refresh.
1471 */
1472 at91_ramc_write(0, AT91_MC_SDRAMC_LPR, 0);
1473
1474 at91_pm_init(at91rm9200_idle);
1475 }
1476
1477 void __init sam9x60_pm_init(void)
1478 {
1479 static const int modes[] __initconst = {
1480 AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1,
1481 };
1482 static const int iomaps[] __initconst = {
1483 [AT91_PM_ULP1] = AT91_PM_IOMAP(SHDWC),
1484 };
1485 int ret;
1486
1487 if (!IS_ENABLED(CONFIG_SOC_SAM9X60))
1488 return;
1489
1490 at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
1491 at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
1492 ret = at91_dt_ramc(false);
1493 if (ret)
1494 return;
1495
1496 at91_pm_init(NULL);
1497
1498 soc_pm.ws_ids = sam9x60_ws_ids;
1499 soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
1500 }
1501
1502 void __init at91sam9_pm_init(void)
1503 {
1504 int ret;
1505
1506 if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
1507 return;
1508
1509 /*
1510 * Force STANDBY and ULP0 mode to avoid calling
1511 * at91_pm_modes_validate() which may increase booting time.
1512 * Platform supports anyway only STANDBY and ULP0 modes.
1513 */
1514 soc_pm.data.standby_mode = AT91_PM_STANDBY;
1515 soc_pm.data.suspend_mode = AT91_PM_ULP0;
1516
1517 ret = at91_dt_ramc(false);
1518 if (ret)
1519 return;
1520
1521 at91_pm_init(at91sam9_idle);
1522 }
1523
1524 void __init sama5_pm_init(void)
1525 {
1526 static const int modes[] __initconst = {
1527 AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST,
1528 };
1529 static const u32 iomaps[] __initconst = {
1530 [AT91_PM_ULP0] = AT91_PM_IOMAP(ETHC),
1531 [AT91_PM_ULP0_FAST] = AT91_PM_IOMAP(ETHC),
1532 };
1533 int ret;
1534
1535 if (!IS_ENABLED(CONFIG_SOC_SAMA5))
1536 return;
1537
1538 at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
1539 at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
1540 ret = at91_dt_ramc(false);
1541 if (ret)
1542 return;
1543
1544 at91_pm_init(NULL);
1545
1546 /* Quirks applies to ULP0, ULP0 fast and ULP1 modes. */
1547 soc_pm.quirks.eth[AT91_PM_G_ETH].modes = BIT(AT91_PM_ULP0) |
1548 BIT(AT91_PM_ULP0_FAST) |
1549 BIT(AT91_PM_ULP1);
1550 /* Do not suspend in ULP0, ULP0 fast if GETH is the only wakeup source. */
1551 soc_pm.quirks.eth[AT91_PM_G_ETH].dns_modes = BIT(AT91_PM_ULP0) |
1552 BIT(AT91_PM_ULP0_FAST);
1553 }
1554
1555 void __init sama5d2_pm_init(void)
1556 {
1557 static const int modes[] __initconst = {
1558 AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1,
1559 AT91_PM_BACKUP,
1560 };
1561 static const u32 iomaps[] __initconst = {
1562 [AT91_PM_ULP0] = AT91_PM_IOMAP(ETHC),
1563 [AT91_PM_ULP0_FAST] = AT91_PM_IOMAP(ETHC),
1564 [AT91_PM_ULP1] = AT91_PM_IOMAP(SHDWC) |
1565 AT91_PM_IOMAP(ETHC),
1566 [AT91_PM_BACKUP] = AT91_PM_IOMAP(SHDWC) |
1567 AT91_PM_IOMAP(SFRBU),
1568 };
1569 int ret;
1570
1571 if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
1572 return;
1573
1574 if (IS_ENABLED(CONFIG_ATMEL_SECURE_PM)) {
1575 pr_warn("AT91: Secure PM: ignoring standby mode\n");
1576 at91_pm_secure_init();
1577 return;
1578 }
1579
1580 at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
1581 at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
1582 ret = at91_dt_ramc(false);
1583 if (ret)
1584 return;
1585
1586 at91_pm_init(NULL);
1587
1588 soc_pm.ws_ids = sama5d2_ws_ids;
1589 soc_pm.config_shdwc_ws = at91_sama5d2_config_shdwc_ws;
1590 soc_pm.config_pmc_ws = at91_sama5d2_config_pmc_ws;
1591
1592 soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8);
1593 soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0);
1594 soc_pm.sfrbu_regs.pswbu.softsw = BIT(1);
1595 soc_pm.sfrbu_regs.pswbu.state = BIT(3);
1596
1597 /* Quirk applies to ULP0, ULP0 fast and ULP1 modes. */
1598 soc_pm.quirks.eth[AT91_PM_G_ETH].modes = BIT(AT91_PM_ULP0) |
1599 BIT(AT91_PM_ULP0_FAST) |
1600 BIT(AT91_PM_ULP1);
1601 /*
1602 * Do not suspend in ULP0, ULP0 fast if GETH is the only wakeup
1603 * source.
1604 */
1605 soc_pm.quirks.eth[AT91_PM_G_ETH].dns_modes = BIT(AT91_PM_ULP0) |
1606 BIT(AT91_PM_ULP0_FAST);
1607 }
1608
1609 void __init sama7_pm_init(void)
1610 {
1611 static const int modes[] __initconst = {
1612 AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP1, AT91_PM_BACKUP,
1613 };
1614 static const u32 iomaps[] __initconst = {
1615 [AT91_PM_ULP0] = AT91_PM_IOMAP(SFRBU),
1616 [AT91_PM_ULP1] = AT91_PM_IOMAP(SFRBU) |
1617 AT91_PM_IOMAP(SHDWC) |
1618 AT91_PM_IOMAP(ETHC),
1619 [AT91_PM_BACKUP] = AT91_PM_IOMAP(SFRBU) |
1620 AT91_PM_IOMAP(SHDWC),
1621 };
1622 int ret;
1623
1624 if (!IS_ENABLED(CONFIG_SOC_SAMA7))
1625 return;
1626
1627 at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
1628
1629 ret = at91_dt_ramc(true);
1630 if (ret)
1631 return;
1632
1633 at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
1634 at91_pm_init(NULL);
1635
1636 soc_pm.ws_ids = sama7g5_ws_ids;
1637 soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
1638
1639 soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8);
1640 soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0);
1641 soc_pm.sfrbu_regs.pswbu.softsw = BIT(1);
1642 soc_pm.sfrbu_regs.pswbu.state = BIT(2);
1643
1644 /* Quirks applies to ULP1 for both Ethernet interfaces. */
1645 soc_pm.quirks.eth[AT91_PM_E_ETH].modes = BIT(AT91_PM_ULP1);
1646 soc_pm.quirks.eth[AT91_PM_G_ETH].modes = BIT(AT91_PM_ULP1);
1647 }
1648
1649 static int __init at91_pm_modes_select(char *str)
1650 {
1651 char *s;
1652 substring_t args[MAX_OPT_ARGS];
1653 int standby, suspend;
1654
1655 if (!str)
1656 return 0;
1657
1658 s = strsep(&str, ",");
1659 standby = match_token(s, pm_modes, args);
1660 if (standby < 0)
1661 return 0;
1662
1663 suspend = match_token(str, pm_modes, args);
1664 if (suspend < 0)
1665 return 0;
1666
1667 soc_pm.data.standby_mode = standby;
1668 soc_pm.data.suspend_mode = suspend;
1669
1670 return 0;
1671 }
1672 early_param("atmel.pm_modes", at91_pm_modes_select);
1673
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.