1 /* 2 * Low-level PXA250/210 sleep/wakeUp support 3 * 4 * Initial SA1110 code: 5 * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com> 6 * 7 * Adapted for PXA by Nicolas Pitre: 8 * Copyright (c) 2002 Monta Vista Software, Inc. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License. 12 */ 13 14 #include <linux/linkage.h> 15 #include <asm/assembler.h> 16 #include "smemc.h" 17 #include "pxa2xx-regs.h" 18 19 #define MDREFR_KDIV 0x200a4000 // all banks 20 #define CCCR_SLEEP 0x00000107 // L=7 2N=2 A=0 PPDIS=0 CPDIS=0 21 #define CCCR_N_MASK 0x00000380 22 #define CCCR_M_MASK 0x00000060 23 #define CCCR_L_MASK 0x0000001f 24 .text 25 26 #ifdef CONFIG_PXA3xx 27 /* 28 * pxa3xx_finish_suspend() - forces CPU into sleep state (S2D3C4) 29 */ 30 ENTRY(pxa3xx_finish_suspend) 31 mov r0, #0x06 @ S2D3C4 mode 32 mcr p14, 0, r0, c7, c0, 0 @ enter sleep 33 34 20: b 20b @ waiting for sleep 35 #endif /* CONFIG_PXA3xx */ 36 37 #ifdef CONFIG_PXA27x 38 /* 39 * pxa27x_finish_suspend() 40 * 41 * Forces CPU into sleep state. 42 * 43 * r0 = value for PWRMODE M field for desired sleep state 44 */ 45 ENTRY(pxa27x_finish_suspend) 46 @ Put the processor to sleep 47 @ (also workaround for sighting 28071) 48 49 @ prepare value for sleep mode 50 mov r1, r0 @ sleep mode 51 52 @ prepare pointer to physical address 0 (virtual mapping in generic.c) 53 mov r2, #UNCACHED_PHYS_0 54 55 @ prepare SDRAM refresh settings 56 ldr r4, =MDREFR 57 ldr r5, [r4] 58 59 @ enable SDRAM self-refresh mode 60 orr r5, r5, #MDREFR_SLFRSH 61 62 @ set SDCLKx divide-by-2 bits (this is part of a workaround for Errata 50) 63 ldr r6, =MDREFR_KDIV 64 orr r5, r5, r6 65 66 @ Intel PXA270 Specification Update notes problems sleeping 67 @ with core operating above 91 MHz 68 @ (see Errata 50, ...processor does not exit from sleep...) 69 70 ldr r6, =CCCR 71 ldr r8, [r6] @ keep original value for resume 72 73 ldr r7, =CCCR_SLEEP @ prepare CCCR sleep value 74 mov r0, #0x2 @ prepare value for CLKCFG 75 76 @ align execution to a cache line 77 b pxa_cpu_do_suspend 78 #endif 79 80 #ifdef CONFIG_PXA25x 81 /* 82 * pxa25x_finish_suspend() 83 * 84 * Forces CPU into sleep state. 85 * 86 * r0 = value for PWRMODE M field for desired sleep state 87 */ 88 89 ENTRY(pxa25x_finish_suspend) 90 @ prepare value for sleep mode 91 mov r1, r0 @ sleep mode 92 93 @ prepare pointer to physical address 0 (virtual mapping in generic.c) 94 mov r2, #UNCACHED_PHYS_0 95 96 @ prepare SDRAM refresh settings 97 ldr r4, =MDREFR 98 ldr r5, [r4] 99 100 @ enable SDRAM self-refresh mode 101 orr r5, r5, #MDREFR_SLFRSH 102 103 @ Intel PXA255 Specification Update notes problems 104 @ about suspending with PXBus operating above 133MHz 105 @ (see Errata 31, GPIO output signals, ... unpredictable in sleep 106 @ 107 @ We keep the change-down close to the actual suspend on SDRAM 108 @ as possible to eliminate messing about with the refresh clock 109 @ as the system will restore with the original speed settings 110 @ 111 @ Ben Dooks, 13-Sep-2004 112 113 ldr r6, =CCCR 114 ldr r8, [r6] @ keep original value for resume 115 116 @ ensure x1 for run and turbo mode with memory clock 117 bic r7, r8, #CCCR_M_MASK | CCCR_N_MASK 118 orr r7, r7, #(1<<5) | (2<<7) 119 120 @ check that the memory frequency is within limits 121 and r14, r7, #CCCR_L_MASK 122 teq r14, #1 123 bicne r7, r7, #CCCR_L_MASK 124 orrne r7, r7, #1 @@ 99.53MHz 125 126 @ get ready for the change 127 128 @ note, turbo is not preserved over sleep so there is no 129 @ point in preserving it here. we save it on the stack with the 130 @ other CP registers instead. 131 mov r0, #0 132 mcr p14, 0, r0, c6, c0, 0 133 orr r0, r0, #2 @ initiate change bit 134 b pxa_cpu_do_suspend 135 #endif 136 137 .ltorg 138 .align 5 139 pxa_cpu_do_suspend: 140 141 @ All needed values are now in registers. 142 @ These last instructions should be in cache 143 144 @ initiate the frequency change... 145 str r7, [r6] 146 mcr p14, 0, r0, c6, c0, 0 147 148 @ restore the original cpu speed value for resume 149 str r8, [r6] 150 151 @ need 6 13-MHz cycles before changing PWRMODE 152 @ just set frequency to 91-MHz... 6*91/13 = 42 153 154 mov r0, #42 155 10: subs r0, r0, #1 156 bne 10b 157 158 @ Do not reorder... 159 @ Intel PXA270 Specification Update notes problems performing 160 @ external accesses after SDRAM is put in self-refresh mode 161 @ (see Errata 38 ...hangs when entering self-refresh mode) 162 163 @ force address lines low by reading at physical address 0 164 ldr r3, [r2] 165 166 @ put SDRAM into self-refresh 167 str r5, [r4] 168 169 @ enter sleep mode 170 mcr p14, 0, r1, c7, c0, 0 @ PWRMODE 171 172 20: b 20b @ loop waiting for sleep
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.