1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * PXA27x standby mode 4 * 5 * Author: David Burrage 6 * 7 * 2005 (c) MontaVista Software, Inc. 8 */ 9 10 #include <linux/linkage.h> 11 #include <asm/assembler.h> 12 13 #include "pxa2xx-regs.h" 14 15 .text 16 17 #ifdef CONFIG_PXA27x 18 ENTRY(pxa_cpu_standby) 19 ldr r0, =PSSR 20 mov r1, #(PSSR_PH | PSSR_STS) 21 mov r2, #PWRMODE_STANDBY 22 mov r3, #UNCACHED_PHYS_0 @ Read mem context in. 23 ldr ip, [r3] 24 b 1f 25 26 .align 5 27 1: mcr p14, 0, r2, c7, c0, 0 @ put the system into Standby 28 str r1, [r0] @ make sure PSSR_PH/STS are clear 29 ret lr 30 31 #endif 32 33 #ifdef CONFIG_PXA3xx 34 35 #define PXA3_MDCNFG 0x0000 36 #define PXA3_MDCNFG_DMCEN (1 << 30) 37 #define PXA3_DDR_HCAL 0x0060 38 #define PXA3_DDR_HCAL_HCRNG 0x1f 39 #define PXA3_DDR_HCAL_HCPROG (1 << 28) 40 #define PXA3_DDR_HCAL_HCEN (1 << 31) 41 #define PXA3_DMCIER 0x0070 42 #define PXA3_DMCIER_EDLP (1 << 29) 43 #define PXA3_DMCISR 0x0078 44 #define PXA3_RCOMP 0x0100 45 #define PXA3_RCOMP_SWEVAL (1 << 31) 46 47 ENTRY(pm_enter_standby_start) 48 mov r1, #0xf6000000 @ DMEMC_REG_BASE (PXA3_MDCNFG) 49 add r1, r1, #0x00100000 50 51 /* 52 * Preload the TLB entry for accessing the dynamic memory 53 * controller registers. Note that page table lookups will 54 * fail until the dynamic memory controller has been 55 * reinitialised - and that includes MMU page table walks. 56 * This also means that only the dynamic memory controller 57 * can be reliably accessed in the code following standby. 58 */ 59 ldr r2, [r1] @ Dummy read PXA3_MDCNFG 60 61 mcr p14, 0, r0, c7, c0, 0 62 .rept 8 63 nop 64 .endr 65 66 ldr r0, [r1, #PXA3_DDR_HCAL] @ Clear (and wait for) HCEN 67 bic r0, r0, #PXA3_DDR_HCAL_HCEN 68 str r0, [r1, #PXA3_DDR_HCAL] 69 1: ldr r0, [r1, #PXA3_DDR_HCAL] 70 tst r0, #PXA3_DDR_HCAL_HCEN 71 bne 1b 72 73 ldr r0, [r1, #PXA3_RCOMP] @ Initiate RCOMP 74 orr r0, r0, #PXA3_RCOMP_SWEVAL 75 str r0, [r1, #PXA3_RCOMP] 76 77 mov r0, #~0 @ Clear interrupts 78 str r0, [r1, #PXA3_DMCISR] 79 80 ldr r0, [r1, #PXA3_DMCIER] @ set DMIER[EDLP] 81 orr r0, r0, #PXA3_DMCIER_EDLP 82 str r0, [r1, #PXA3_DMCIER] 83 84 ldr r0, [r1, #PXA3_DDR_HCAL] @ clear HCRNG, set HCPROG, HCEN 85 bic r0, r0, #PXA3_DDR_HCAL_HCRNG 86 orr r0, r0, #PXA3_DDR_HCAL_HCEN | PXA3_DDR_HCAL_HCPROG 87 str r0, [r1, #PXA3_DDR_HCAL] 88 89 1: ldr r0, [r1, #PXA3_DMCISR] 90 tst r0, #PXA3_DMCIER_EDLP 91 beq 1b 92 93 ldr r0, [r1, #PXA3_MDCNFG] @ set PXA3_MDCNFG[DMCEN] 94 orr r0, r0, #PXA3_MDCNFG_DMCEN 95 str r0, [r1, #PXA3_MDCNFG] 96 1: ldr r0, [r1, #PXA3_MDCNFG] 97 tst r0, #PXA3_MDCNFG_DMCEN 98 beq 1b 99 100 ldr r0, [r1, #PXA3_DDR_HCAL] @ set PXA3_DDR_HCAL[HCRNG] 101 orr r0, r0, #2 @ HCRNG 102 str r0, [r1, #PXA3_DDR_HCAL] 103 104 ldr r0, [r1, #PXA3_DMCIER] @ Clear the interrupt 105 bic r0, r0, #0x20000000 106 str r0, [r1, #PXA3_DMCIER] 107 108 ret lr 109 ENTRY(pm_enter_standby_end) 110 111 #endif
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.