1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * linux/arch/arm/mach-sa1100/clock.c
4 */
5 #include <linux/kernel.h>
6 #include <linux/errno.h>
7 #include <linux/err.h>
8 #include <linux/clk.h>
9 #include <linux/clkdev.h>
10 #include <linux/clk-provider.h>
11 #include <linux/io.h>
12 #include <linux/spinlock.h>
13
14 #include <mach/hardware.h>
15 #include <mach/generic.h>
16
17 static const char * const clk_tucr_parents[] = {
18 "clk32768", "clk3686400",
19 };
20
21 static DEFINE_SPINLOCK(tucr_lock);
22
23 static int clk_gpio27_enable(struct clk_hw *hw)
24 {
25 unsigned long flags;
26
27 /*
28 * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
29 * (SA-1110 Developer's Manual, section 9.1.2.1)
30 */
31 local_irq_save(flags);
32 GAFR |= GPIO_32_768kHz;
33 GPDR |= GPIO_32_768kHz;
34 local_irq_restore(flags);
35
36 return 0;
37 }
38
39 static void clk_gpio27_disable(struct clk_hw *hw)
40 {
41 unsigned long flags;
42
43 local_irq_save(flags);
44 GPDR &= ~GPIO_32_768kHz;
45 GAFR &= ~GPIO_32_768kHz;
46 local_irq_restore(flags);
47 }
48
49 static const struct clk_ops clk_gpio27_ops = {
50 .enable = clk_gpio27_enable,
51 .disable = clk_gpio27_disable,
52 };
53
54 static const char * const clk_gpio27_parents[] = {
55 "tucr-mux",
56 };
57
58 static const struct clk_init_data clk_gpio27_init_data __initconst = {
59 .name = "gpio27",
60 .ops = &clk_gpio27_ops,
61 .parent_names = clk_gpio27_parents,
62 .num_parents = ARRAY_SIZE(clk_gpio27_parents),
63 };
64
65 /*
66 * Derived from the table 8-1 in the SA1110 manual, the MPLL appears to
67 * multiply its input rate by 4 x (4 + PPCR). This calculation gives
68 * the exact rate. The figures given in the table are the rates rounded
69 * to 100kHz. Stick with sa11x0_getspeed() for the time being.
70 */
71 static unsigned long clk_mpll_recalc_rate(struct clk_hw *hw,
72 unsigned long prate)
73 {
74 return sa11x0_getspeed(0) * 1000;
75 }
76
77 static const struct clk_ops clk_mpll_ops = {
78 .recalc_rate = clk_mpll_recalc_rate,
79 };
80
81 static const char * const clk_mpll_parents[] = {
82 "clk3686400",
83 };
84
85 static const struct clk_init_data clk_mpll_init_data __initconst = {
86 .name = "mpll",
87 .ops = &clk_mpll_ops,
88 .parent_names = clk_mpll_parents,
89 .num_parents = ARRAY_SIZE(clk_mpll_parents),
90 .flags = CLK_GET_RATE_NOCACHE | CLK_IS_CRITICAL,
91 };
92
93 int __init sa11xx_clk_init(void)
94 {
95 struct clk_hw *hw;
96 int ret;
97
98 hw = clk_hw_register_fixed_rate(NULL, "clk32768", NULL, 0, 32768);
99 if (IS_ERR(hw))
100 return PTR_ERR(hw);
101
102 clk_hw_register_clkdev(hw, NULL, "sa1100-rtc");
103
104 hw = clk_hw_register_fixed_rate(NULL, "clk3686400", NULL, 0, 3686400);
105 if (IS_ERR(hw))
106 return PTR_ERR(hw);
107
108 clk_hw_register_clkdev(hw, "OSTIMER0", NULL);
109
110 hw = kzalloc(sizeof(*hw), GFP_KERNEL);
111 if (!hw)
112 return -ENOMEM;
113 hw->init = &clk_mpll_init_data;
114 ret = clk_hw_register(NULL, hw);
115 if (ret) {
116 kfree(hw);
117 return ret;
118 }
119
120 clk_hw_register_clkdev(hw, NULL, "sa11x0-fb");
121 clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia");
122 clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia.0");
123 clk_hw_register_clkdev(hw, NULL, "sa11x0-pcmcia.1");
124 clk_hw_register_clkdev(hw, NULL, "1800");
125
126 hw = clk_hw_register_mux(NULL, "tucr-mux", clk_tucr_parents,
127 ARRAY_SIZE(clk_tucr_parents), 0,
128 (void __iomem *)&TUCR, FShft(TUCR_TSEL),
129 FAlnMsk(TUCR_TSEL), 0, &tucr_lock);
130 clk_set_rate(hw->clk, 3686400);
131
132 hw = kzalloc(sizeof(*hw), GFP_KERNEL);
133 if (!hw)
134 return -ENOMEM;
135 hw->init = &clk_gpio27_init_data;
136 ret = clk_hw_register(NULL, hw);
137 if (ret) {
138 kfree(hw);
139 return ret;
140 }
141
142 clk_hw_register_clkdev(hw, NULL, "sa1111.0");
143
144 return 0;
145 }
146
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.