1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 /* 3 * linux/arch/arm/mm/proc-fa526.S: MMU functions for FA526 4 * 5 * Written by : Luke Lee 6 * Copyright (C) 2005 Faraday Corp. 7 * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> 8 * 9 * These are the low level assembler for performing cache and TLB 10 * functions on the fa526. 11 */ 12 #include <linux/linkage.h> 13 #include <linux/init.h> 14 #include <linux/cfi_types.h> 15 #include <linux/pgtable.h> 16 #include <asm/assembler.h> 17 #include <asm/hwcap.h> 18 #include <asm/pgtable-hwdef.h> 19 #include <asm/page.h> 20 #include <asm/ptrace.h> 21 22 #include "proc-macros.S" 23 24 #define CACHE_DLINESIZE 16 25 26 .text 27 /* 28 * cpu_fa526_proc_init() 29 */ 30 SYM_TYPED_FUNC_START(cpu_fa526_proc_init) 31 ret lr 32 SYM_FUNC_END(cpu_fa526_proc_init) 33 34 /* 35 * cpu_fa526_proc_fin() 36 */ 37 SYM_TYPED_FUNC_START(cpu_fa526_proc_fin) 38 mrc p15, 0, r0, c1, c0, 0 @ ctrl register 39 bic r0, r0, #0x1000 @ ...i............ 40 bic r0, r0, #0x000e @ ............wca. 41 mcr p15, 0, r0, c1, c0, 0 @ disable caches 42 nop 43 nop 44 ret lr 45 SYM_FUNC_END(cpu_fa526_proc_fin) 46 47 /* 48 * cpu_fa526_reset(loc) 49 * 50 * Perform a soft reset of the system. Put the CPU into the 51 * same state as it would be if it had been reset, and branch 52 * to what would be the reset vector. 53 * 54 * loc: location to jump to for soft reset 55 */ 56 .align 4 57 .pushsection .idmap.text, "ax" 58 SYM_TYPED_FUNC_START(cpu_fa526_reset) 59 /* TODO: Use CP8 if possible... */ 60 mov ip, #0 61 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches 62 mcr p15, 0, ip, c7, c10, 4 @ drain WB 63 #ifdef CONFIG_MMU 64 mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs 65 #endif 66 mrc p15, 0, ip, c1, c0, 0 @ ctrl register 67 bic ip, ip, #0x000f @ ............wcam 68 bic ip, ip, #0x1100 @ ...i...s........ 69 bic ip, ip, #0x0800 @ BTB off 70 mcr p15, 0, ip, c1, c0, 0 @ ctrl register 71 nop 72 nop 73 ret r0 74 SYM_FUNC_END(cpu_fa526_reset) 75 .popsection 76 77 /* 78 * cpu_fa526_do_idle() 79 */ 80 .align 4 81 SYM_TYPED_FUNC_START(cpu_fa526_do_idle) 82 ret lr 83 SYM_FUNC_END(cpu_fa526_do_idle) 84 85 SYM_TYPED_FUNC_START(cpu_fa526_dcache_clean_area) 86 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry 87 add r0, r0, #CACHE_DLINESIZE 88 subs r1, r1, #CACHE_DLINESIZE 89 bhi 1b 90 mcr p15, 0, r0, c7, c10, 4 @ drain WB 91 ret lr 92 SYM_FUNC_END(cpu_fa526_dcache_clean_area) 93 94 /* =============================== PageTable ============================== */ 95 96 /* 97 * cpu_fa526_switch_mm(pgd) 98 * 99 * Set the translation base pointer to be as described by pgd. 100 * 101 * pgd: new page tables 102 */ 103 .align 4 104 SYM_TYPED_FUNC_START(cpu_fa526_switch_mm) 105 #ifdef CONFIG_MMU 106 mov ip, #0 107 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH 108 mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache 109 #else 110 mcr p15, 0, ip, c7, c14, 0 @ clean and invalidate whole D cache 111 #endif 112 mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache 113 mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB since mm changed 114 mcr p15, 0, ip, c7, c10, 4 @ data write barrier 115 mcr p15, 0, ip, c7, c5, 4 @ prefetch flush 116 mcr p15, 0, r0, c2, c0, 0 @ load page table pointer 117 mcr p15, 0, ip, c8, c7, 0 @ invalidate UTLB 118 #endif 119 ret lr 120 SYM_FUNC_END(cpu_fa526_switch_mm) 121 122 /* 123 * cpu_fa526_set_pte_ext(ptep, pte, ext) 124 * 125 * Set a PTE and flush it out 126 */ 127 .align 4 128 SYM_TYPED_FUNC_START(cpu_fa526_set_pte_ext) 129 #ifdef CONFIG_MMU 130 armv3_set_pte_ext 131 mov r0, r0 132 mcr p15, 0, r0, c7, c10, 1 @ clean D entry 133 mov r0, #0 134 mcr p15, 0, r0, c7, c10, 4 @ drain WB 135 #endif 136 ret lr 137 SYM_FUNC_END(cpu_fa526_set_pte_ext) 138 139 .type __fa526_setup, #function 140 __fa526_setup: 141 /* On return of this routine, r0 must carry correct flags for CFG register */ 142 mov r0, #0 143 mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4 144 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4 145 #ifdef CONFIG_MMU 146 mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 147 #endif 148 mcr p15, 0, r0, c7, c5, 5 @ invalidate IScratchpad RAM 149 150 mov r0, #1 151 mcr p15, 0, r0, c1, c1, 0 @ turn-on ECR 152 153 mov r0, #0 154 mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB All 155 mcr p15, 0, r0, c7, c10, 4 @ data write barrier 156 mcr p15, 0, r0, c7, c5, 4 @ prefetch flush 157 158 mov r0, #0x1f @ Domains 0, 1 = manager, 2 = client 159 mcr p15, 0, r0, c3, c0 @ load domain access register 160 161 mrc p15, 0, r0, c1, c0 @ get control register v4 162 ldr r5, fa526_cr1_clear 163 bic r0, r0, r5 164 ldr r5, fa526_cr1_set 165 orr r0, r0, r5 166 ret lr 167 .size __fa526_setup, . - __fa526_setup 168 169 /* 170 * .RVI ZFRS BLDP WCAM 171 * ..11 1001 .111 1101 172 * 173 */ 174 .type fa526_cr1_clear, #object 175 .type fa526_cr1_set, #object 176 fa526_cr1_clear: 177 .word 0x3f3f 178 fa526_cr1_set: 179 .word 0x397D 180 181 __INITDATA 182 183 @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) 184 define_processor_functions fa526, dabort=v4_early_abort, pabort=legacy_pabort 185 186 .section ".rodata" 187 188 string cpu_arch_name, "armv4" 189 string cpu_elf_name, "v4" 190 string cpu_fa526_name, "FA526" 191 192 .align 193 194 .section ".proc.info.init", "a" 195 196 .type __fa526_proc_info,#object 197 __fa526_proc_info: 198 .long 0x66015261 199 .long 0xff01fff1 200 .long PMD_TYPE_SECT | \ 201 PMD_SECT_BUFFERABLE | \ 202 PMD_SECT_CACHEABLE | \ 203 PMD_BIT4 | \ 204 PMD_SECT_AP_WRITE | \ 205 PMD_SECT_AP_READ 206 .long PMD_TYPE_SECT | \ 207 PMD_BIT4 | \ 208 PMD_SECT_AP_WRITE | \ 209 PMD_SECT_AP_READ 210 initfn __fa526_setup, __fa526_proc_info 211 .long cpu_arch_name 212 .long cpu_elf_name 213 .long HWCAP_SWP | HWCAP_HALF 214 .long cpu_fa526_name 215 .long fa526_processor_functions 216 .long fa_tlb_fns 217 .long fa_user_fns 218 .long fa_cache_fns 219 .size __fa526_proc_info, . - __fa526_proc_info
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.