1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3 * linux/arch/arm/mm/proc-feroceon.S: MMU functions for Feroceon
4 *
5 * Heavily based on proc-arm926.S
6 * Maintainer: Assaf Hoffman <hoffman@marvell.com>
7 */
8
9 #include <linux/linkage.h>
10 #include <linux/init.h>
11 #include <linux/cfi_types.h>
12 #include <linux/pgtable.h>
13 #include <asm/assembler.h>
14 #include <asm/hwcap.h>
15 #include <asm/pgtable-hwdef.h>
16 #include <asm/page.h>
17 #include <asm/ptrace.h>
18 #include "proc-macros.S"
19
20 /*
21 * This is the maximum size of an area which will be invalidated
22 * using the single invalidate entry instructions. Anything larger
23 * than this, and we go for the whole cache.
24 *
25 * This value should be chosen such that we choose the cheapest
26 * alternative.
27 */
28 #define CACHE_DLIMIT 16384
29
30 /*
31 * the cache line size of the I and D cache
32 */
33 #define CACHE_DLINESIZE 32
34
35 .bss
36 .align 3
37 __cache_params_loc:
38 .space 8
39
40 .text
41 __cache_params:
42 .word __cache_params_loc
43
44 /*
45 * cpu_feroceon_proc_init()
46 */
47 SYM_TYPED_FUNC_START(cpu_feroceon_proc_init)
48 mrc p15, 0, r0, c0, c0, 1 @ read cache type register
49 ldr r1, __cache_params
50 mov r2, #(16 << 5)
51 tst r0, #(1 << 16) @ get way
52 mov r0, r0, lsr #18 @ get cache size order
53 movne r3, #((4 - 1) << 30) @ 4-way
54 and r0, r0, #0xf
55 moveq r3, #0 @ 1-way
56 mov r2, r2, lsl r0 @ actual cache size
57 movne r2, r2, lsr #2 @ turned into # of sets
58 sub r2, r2, #(1 << 5)
59 stmia r1, {r2, r3}
60 #ifdef CONFIG_VFP
61 mov r1, #1 @ disable quirky VFP
62 str_l r1, VFP_arch_feroceon, r2
63 #endif
64 ret lr
65 SYM_FUNC_END(cpu_feroceon_proc_init)
66
67 /*
68 * cpu_feroceon_proc_fin()
69 */
70 SYM_TYPED_FUNC_START(cpu_feroceon_proc_fin)
71 #if defined(CONFIG_CACHE_FEROCEON_L2) && \
72 !defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
73 mov r0, #0
74 mcr p15, 1, r0, c15, c9, 0 @ clean L2
75 mcr p15, 0, r0, c7, c10, 4 @ drain WB
76 #endif
77
78 mrc p15, 0, r0, c1, c0, 0 @ ctrl register
79 bic r0, r0, #0x1000 @ ...i............
80 bic r0, r0, #0x000e @ ............wca.
81 mcr p15, 0, r0, c1, c0, 0 @ disable caches
82 ret lr
83 SYM_FUNC_END(cpu_feroceon_proc_fin)
84
85 /*
86 * cpu_feroceon_reset(loc)
87 *
88 * Perform a soft reset of the system. Put the CPU into the
89 * same state as it would be if it had been reset, and branch
90 * to what would be the reset vector.
91 *
92 * loc: location to jump to for soft reset
93 */
94 .align 5
95 .pushsection .idmap.text, "ax"
96 SYM_TYPED_FUNC_START(cpu_feroceon_reset)
97 mov ip, #0
98 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
99 mcr p15, 0, ip, c7, c10, 4 @ drain WB
100 #ifdef CONFIG_MMU
101 mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
102 #endif
103 mrc p15, 0, ip, c1, c0, 0 @ ctrl register
104 bic ip, ip, #0x000f @ ............wcam
105 bic ip, ip, #0x1100 @ ...i...s........
106 mcr p15, 0, ip, c1, c0, 0 @ ctrl register
107 ret r0
108 SYM_FUNC_END(cpu_feroceon_reset)
109 .popsection
110
111 /*
112 * cpu_feroceon_do_idle()
113 *
114 * Called with IRQs disabled
115 */
116 .align 5
117 SYM_TYPED_FUNC_START(cpu_feroceon_do_idle)
118 mov r0, #0
119 mcr p15, 0, r0, c7, c10, 4 @ Drain write buffer
120 mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
121 ret lr
122 SYM_FUNC_END(cpu_feroceon_do_idle)
123
124 /*
125 * flush_icache_all()
126 *
127 * Unconditionally clean and invalidate the entire icache.
128 */
129 SYM_TYPED_FUNC_START(feroceon_flush_icache_all)
130 mov r0, #0
131 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
132 ret lr
133 SYM_FUNC_END(feroceon_flush_icache_all)
134
135 /*
136 * flush_user_cache_all()
137 *
138 * Clean and invalidate all cache entries in a particular
139 * address space.
140 */
141 .align 5
142 SYM_FUNC_ALIAS(feroceon_flush_user_cache_all, feroceon_flush_kern_cache_all)
143
144 /*
145 * flush_kern_cache_all()
146 *
147 * Clean and invalidate the entire cache.
148 */
149 SYM_TYPED_FUNC_START(feroceon_flush_kern_cache_all)
150 mov r2, #VM_EXEC
151
152 __flush_whole_cache:
153 ldr r1, __cache_params
154 ldmia r1, {r1, r3}
155 1: orr ip, r1, r3
156 2: mcr p15, 0, ip, c7, c14, 2 @ clean + invalidate D set/way
157 subs ip, ip, #(1 << 30) @ next way
158 bcs 2b
159 subs r1, r1, #(1 << 5) @ next set
160 bcs 1b
161
162 tst r2, #VM_EXEC
163 mov ip, #0
164 mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
165 mcrne p15, 0, ip, c7, c10, 4 @ drain WB
166 ret lr
167 SYM_FUNC_END(feroceon_flush_kern_cache_all)
168
169 /*
170 * flush_user_cache_range(start, end, flags)
171 *
172 * Clean and invalidate a range of cache entries in the
173 * specified address range.
174 *
175 * - start - start address (inclusive)
176 * - end - end address (exclusive)
177 * - flags - vm_flags describing address space
178 */
179 .align 5
180 SYM_TYPED_FUNC_START(feroceon_flush_user_cache_range)
181 sub r3, r1, r0 @ calculate total size
182 cmp r3, #CACHE_DLIMIT
183 bgt __flush_whole_cache
184 1: tst r2, #VM_EXEC
185 mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
186 mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
187 add r0, r0, #CACHE_DLINESIZE
188 mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
189 mcrne p15, 0, r0, c7, c5, 1 @ invalidate I entry
190 add r0, r0, #CACHE_DLINESIZE
191 cmp r0, r1
192 blo 1b
193 tst r2, #VM_EXEC
194 mov ip, #0
195 mcrne p15, 0, ip, c7, c10, 4 @ drain WB
196 ret lr
197 SYM_FUNC_END(feroceon_flush_user_cache_range)
198
199 /*
200 * coherent_kern_range(start, end)
201 *
202 * Ensure coherency between the Icache and the Dcache in the
203 * region described by start, end. If you have non-snooping
204 * Harvard caches, you need to implement this function.
205 *
206 * - start - virtual start address
207 * - end - virtual end address
208 */
209 .align 5
210 SYM_TYPED_FUNC_START(feroceon_coherent_kern_range)
211 #ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
212 b feroceon_coherent_user_range
213 #endif
214 SYM_FUNC_END(feroceon_coherent_kern_range)
215
216 /*
217 * coherent_user_range(start, end)
218 *
219 * Ensure coherency between the Icache and the Dcache in the
220 * region described by start, end. If you have non-snooping
221 * Harvard caches, you need to implement this function.
222 *
223 * - start - virtual start address
224 * - end - virtual end address
225 */
226 SYM_TYPED_FUNC_START(feroceon_coherent_user_range)
227 bic r0, r0, #CACHE_DLINESIZE - 1
228 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
229 mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
230 add r0, r0, #CACHE_DLINESIZE
231 cmp r0, r1
232 blo 1b
233 mcr p15, 0, r0, c7, c10, 4 @ drain WB
234 mov r0, #0
235 ret lr
236 SYM_FUNC_END(feroceon_coherent_user_range)
237
238 /*
239 * flush_kern_dcache_area(void *addr, size_t size)
240 *
241 * Ensure no D cache aliasing occurs, either with itself or
242 * the I cache
243 *
244 * - addr - kernel address
245 * - size - region size
246 */
247 .align 5
248 SYM_TYPED_FUNC_START(feroceon_flush_kern_dcache_area)
249 add r1, r0, r1
250 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
251 add r0, r0, #CACHE_DLINESIZE
252 cmp r0, r1
253 blo 1b
254 mov r0, #0
255 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
256 mcr p15, 0, r0, c7, c10, 4 @ drain WB
257 ret lr
258 SYM_FUNC_END(feroceon_flush_kern_dcache_area)
259
260 .align 5
261 SYM_TYPED_FUNC_START(feroceon_range_flush_kern_dcache_area)
262 mrs r2, cpsr
263 add r1, r0, #PAGE_SZ - CACHE_DLINESIZE @ top addr is inclusive
264 orr r3, r2, #PSR_I_BIT
265 msr cpsr_c, r3 @ disable interrupts
266 mcr p15, 5, r0, c15, c15, 0 @ D clean/inv range start
267 mcr p15, 5, r1, c15, c15, 1 @ D clean/inv range top
268 msr cpsr_c, r2 @ restore interrupts
269 mov r0, #0
270 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
271 mcr p15, 0, r0, c7, c10, 4 @ drain WB
272 ret lr
273 SYM_FUNC_END(feroceon_range_flush_kern_dcache_area)
274
275 /*
276 * dma_inv_range(start, end)
277 *
278 * Invalidate (discard) the specified virtual address range.
279 * May not write back any entries. If 'start' or 'end'
280 * are not cache line aligned, those lines must be written
281 * back.
282 *
283 * - start - virtual start address
284 * - end - virtual end address
285 *
286 * (same as v4wb)
287 */
288 .align 5
289 feroceon_dma_inv_range:
290 tst r0, #CACHE_DLINESIZE - 1
291 bic r0, r0, #CACHE_DLINESIZE - 1
292 mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
293 tst r1, #CACHE_DLINESIZE - 1
294 mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
295 1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
296 add r0, r0, #CACHE_DLINESIZE
297 cmp r0, r1
298 blo 1b
299 mcr p15, 0, r0, c7, c10, 4 @ drain WB
300 ret lr
301
302 .align 5
303 feroceon_range_dma_inv_range:
304 mrs r2, cpsr
305 tst r0, #CACHE_DLINESIZE - 1
306 mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
307 tst r1, #CACHE_DLINESIZE - 1
308 mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
309 cmp r1, r0
310 subne r1, r1, #1 @ top address is inclusive
311 orr r3, r2, #PSR_I_BIT
312 msr cpsr_c, r3 @ disable interrupts
313 mcr p15, 5, r0, c15, c14, 0 @ D inv range start
314 mcr p15, 5, r1, c15, c14, 1 @ D inv range top
315 msr cpsr_c, r2 @ restore interrupts
316 ret lr
317
318 /*
319 * dma_clean_range(start, end)
320 *
321 * Clean the specified virtual address range.
322 *
323 * - start - virtual start address
324 * - end - virtual end address
325 *
326 * (same as v4wb)
327 */
328 .align 5
329 feroceon_dma_clean_range:
330 bic r0, r0, #CACHE_DLINESIZE - 1
331 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
332 add r0, r0, #CACHE_DLINESIZE
333 cmp r0, r1
334 blo 1b
335 mcr p15, 0, r0, c7, c10, 4 @ drain WB
336 ret lr
337
338 .align 5
339 feroceon_range_dma_clean_range:
340 mrs r2, cpsr
341 cmp r1, r0
342 subne r1, r1, #1 @ top address is inclusive
343 orr r3, r2, #PSR_I_BIT
344 msr cpsr_c, r3 @ disable interrupts
345 mcr p15, 5, r0, c15, c13, 0 @ D clean range start
346 mcr p15, 5, r1, c15, c13, 1 @ D clean range top
347 msr cpsr_c, r2 @ restore interrupts
348 mcr p15, 0, r0, c7, c10, 4 @ drain WB
349 ret lr
350
351 /*
352 * dma_flush_range(start, end)
353 *
354 * Clean and invalidate the specified virtual address range.
355 *
356 * - start - virtual start address
357 * - end - virtual end address
358 */
359 .align 5
360 SYM_TYPED_FUNC_START(feroceon_dma_flush_range)
361 bic r0, r0, #CACHE_DLINESIZE - 1
362 1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
363 add r0, r0, #CACHE_DLINESIZE
364 cmp r0, r1
365 blo 1b
366 mcr p15, 0, r0, c7, c10, 4 @ drain WB
367 ret lr
368 SYM_FUNC_END(feroceon_dma_flush_range)
369
370 .align 5
371 SYM_TYPED_FUNC_START(feroceon_range_dma_flush_range)
372 mrs r2, cpsr
373 cmp r1, r0
374 subne r1, r1, #1 @ top address is inclusive
375 orr r3, r2, #PSR_I_BIT
376 msr cpsr_c, r3 @ disable interrupts
377 mcr p15, 5, r0, c15, c15, 0 @ D clean/inv range start
378 mcr p15, 5, r1, c15, c15, 1 @ D clean/inv range top
379 msr cpsr_c, r2 @ restore interrupts
380 mcr p15, 0, r0, c7, c10, 4 @ drain WB
381 ret lr
382 SYM_FUNC_END(feroceon_range_dma_flush_range)
383
384 /*
385 * dma_map_area(start, size, dir)
386 * - start - kernel virtual start address
387 * - size - size of region
388 * - dir - DMA direction
389 */
390 SYM_TYPED_FUNC_START(feroceon_dma_map_area)
391 add r1, r1, r0
392 cmp r2, #DMA_TO_DEVICE
393 beq feroceon_dma_clean_range
394 bcs feroceon_dma_inv_range
395 b feroceon_dma_flush_range
396 SYM_FUNC_END(feroceon_dma_map_area)
397
398 /*
399 * dma_map_area(start, size, dir)
400 * - start - kernel virtual start address
401 * - size - size of region
402 * - dir - DMA direction
403 */
404 SYM_TYPED_FUNC_START(feroceon_range_dma_map_area)
405 add r1, r1, r0
406 cmp r2, #DMA_TO_DEVICE
407 beq feroceon_range_dma_clean_range
408 bcs feroceon_range_dma_inv_range
409 b feroceon_range_dma_flush_range
410 SYM_FUNC_END(feroceon_range_dma_map_area)
411
412 /*
413 * dma_unmap_area(start, size, dir)
414 * - start - kernel virtual start address
415 * - size - size of region
416 * - dir - DMA direction
417 */
418 SYM_TYPED_FUNC_START(feroceon_dma_unmap_area)
419 ret lr
420 SYM_FUNC_END(feroceon_dma_unmap_area)
421
422 .align 5
423 SYM_TYPED_FUNC_START(cpu_feroceon_dcache_clean_area)
424 #if defined(CONFIG_CACHE_FEROCEON_L2) && \
425 !defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
426 mov r2, r0
427 mov r3, r1
428 #endif
429 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
430 add r0, r0, #CACHE_DLINESIZE
431 subs r1, r1, #CACHE_DLINESIZE
432 bhi 1b
433 #if defined(CONFIG_CACHE_FEROCEON_L2) && \
434 !defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
435 1: mcr p15, 1, r2, c15, c9, 1 @ clean L2 entry
436 add r2, r2, #CACHE_DLINESIZE
437 subs r3, r3, #CACHE_DLINESIZE
438 bhi 1b
439 #endif
440 mcr p15, 0, r0, c7, c10, 4 @ drain WB
441 ret lr
442 SYM_FUNC_END(cpu_feroceon_dcache_clean_area)
443
444 /* =============================== PageTable ============================== */
445
446 /*
447 * cpu_feroceon_switch_mm(pgd)
448 *
449 * Set the translation base pointer to be as described by pgd.
450 *
451 * pgd: new page tables
452 */
453 .align 5
454 SYM_TYPED_FUNC_START(cpu_feroceon_switch_mm)
455 #ifdef CONFIG_MMU
456 /*
457 * Note: we wish to call __flush_whole_cache but we need to preserve
458 * lr to do so. The only way without touching main memory is to
459 * use r2 which is normally used to test the VM_EXEC flag, and
460 * compensate locally for the skipped ops if it is not set.
461 */
462 mov r2, lr @ abuse r2 to preserve lr
463 bl __flush_whole_cache
464 @ if r2 contains the VM_EXEC bit then the next 2 ops are done already
465 tst r2, #VM_EXEC
466 mcreq p15, 0, ip, c7, c5, 0 @ invalidate I cache
467 mcreq p15, 0, ip, c7, c10, 4 @ drain WB
468
469 mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
470 mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
471 ret r2
472 #else
473 ret lr
474 #endif
475 SYM_FUNC_END(cpu_feroceon_switch_mm)
476
477 /*
478 * cpu_feroceon_set_pte_ext(ptep, pte, ext)
479 *
480 * Set a PTE and flush it out
481 */
482 .align 5
483 SYM_TYPED_FUNC_START(cpu_feroceon_set_pte_ext)
484 #ifdef CONFIG_MMU
485 armv3_set_pte_ext wc_disable=0
486 mov r0, r0
487 mcr p15, 0, r0, c7, c10, 1 @ clean D entry
488 #if defined(CONFIG_CACHE_FEROCEON_L2) && \
489 !defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
490 mcr p15, 1, r0, c15, c9, 1 @ clean L2 entry
491 #endif
492 mcr p15, 0, r0, c7, c10, 4 @ drain WB
493 #endif
494 ret lr
495 SYM_FUNC_END(cpu_feroceon_set_pte_ext)
496
497 /* Suspend/resume support: taken from arch/arm/mm/proc-arm926.S */
498 .globl cpu_feroceon_suspend_size
499 .equ cpu_feroceon_suspend_size, 4 * 3
500 #ifdef CONFIG_ARM_CPU_SUSPEND
501 SYM_TYPED_FUNC_START(cpu_feroceon_do_suspend)
502 stmfd sp!, {r4 - r6, lr}
503 mrc p15, 0, r4, c13, c0, 0 @ PID
504 mrc p15, 0, r5, c3, c0, 0 @ Domain ID
505 mrc p15, 0, r6, c1, c0, 0 @ Control register
506 stmia r0, {r4 - r6}
507 ldmfd sp!, {r4 - r6, pc}
508 SYM_FUNC_END(cpu_feroceon_do_suspend)
509
510 SYM_TYPED_FUNC_START(cpu_feroceon_do_resume)
511 mov ip, #0
512 mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
513 mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
514 ldmia r0, {r4 - r6}
515 mcr p15, 0, r4, c13, c0, 0 @ PID
516 mcr p15, 0, r5, c3, c0, 0 @ Domain ID
517 mcr p15, 0, r1, c2, c0, 0 @ TTB address
518 mov r0, r6 @ control register
519 b cpu_resume_mmu
520 SYM_FUNC_END(cpu_feroceon_do_resume)
521 #endif
522
523 .type __feroceon_setup, #function
524 __feroceon_setup:
525 mov r0, #0
526 mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
527 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
528 #ifdef CONFIG_MMU
529 mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
530 #endif
531
532 adr r5, feroceon_crval
533 ldmia r5, {r5, r6}
534 mrc p15, 0, r0, c1, c0 @ get control register v4
535 bic r0, r0, r5
536 orr r0, r0, r6
537 ret lr
538 .size __feroceon_setup, . - __feroceon_setup
539
540 /*
541 * B
542 * R P
543 * .RVI UFRS BLDP WCAM
544 * .011 .001 ..11 0101
545 *
546 */
547 .type feroceon_crval, #object
548 feroceon_crval:
549 crval clear=0x0000773f, mmuset=0x00003135, ucset=0x00001134
550
551 __INITDATA
552
553 @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
554 define_processor_functions feroceon, dabort=v5t_early_abort, pabort=legacy_pabort
555
556 .section ".rodata"
557
558 string cpu_arch_name, "armv5te"
559 string cpu_elf_name, "v5"
560 string cpu_feroceon_name, "Feroceon"
561 string cpu_88fr531_name, "Feroceon 88FR531-vd"
562 string cpu_88fr571_name, "Feroceon 88FR571-vd"
563 string cpu_88fr131_name, "Feroceon 88FR131"
564
565 .align
566
567 .section ".proc.info.init", "a"
568
569 .macro feroceon_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache:req
570 .type __\name\()_proc_info,#object
571 __\name\()_proc_info:
572 .long \cpu_val
573 .long \cpu_mask
574 .long PMD_TYPE_SECT | \
575 PMD_SECT_BUFFERABLE | \
576 PMD_SECT_CACHEABLE | \
577 PMD_BIT4 | \
578 PMD_SECT_AP_WRITE | \
579 PMD_SECT_AP_READ
580 .long PMD_TYPE_SECT | \
581 PMD_BIT4 | \
582 PMD_SECT_AP_WRITE | \
583 PMD_SECT_AP_READ
584 initfn __feroceon_setup, __\name\()_proc_info
585 .long cpu_arch_name
586 .long cpu_elf_name
587 .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
588 .long \cpu_name
589 .long feroceon_processor_functions
590 .long v4wbi_tlb_fns
591 .long feroceon_user_fns
592 .long \cache
593 .size __\name\()_proc_info, . - __\name\()_proc_info
594 .endm
595
596 #ifdef CONFIG_CPU_FEROCEON_OLD_ID
597 feroceon_proc_info feroceon_old_id, 0x41009260, 0xff00fff0, \
598 cpu_name=cpu_feroceon_name, cache=feroceon_cache_fns
599 #endif
600
601 feroceon_proc_info 88fr531, 0x56055310, 0xfffffff0, cpu_88fr531_name, \
602 cache=feroceon_cache_fns
603 feroceon_proc_info 88fr571, 0x56155710, 0xfffffff0, cpu_88fr571_name, \
604 cache=feroceon_range_cache_fns
605 feroceon_proc_info 88fr131, 0x56251310, 0xfffffff0, cpu_88fr131_name, \
606 cache=feroceon_range_cache_fns
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.