~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi

Version: ~ [ linux-6.11-rc3 ] ~ [ linux-6.10.4 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.45 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.104 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.164 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.223 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.281 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.319 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.9 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  2 /*
  3  * Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com>
  4  */
  5 
  6 #include <dt-bindings/interrupt-controller/arm-gic.h>
  7 #include <dt-bindings/clock/sun50i-a100-ccu.h>
  8 #include <dt-bindings/clock/sun50i-a100-r-ccu.h>
  9 #include <dt-bindings/reset/sun50i-a100-ccu.h>
 10 #include <dt-bindings/reset/sun50i-a100-r-ccu.h>
 11 
 12 / {
 13         interrupt-parent = <&gic>;
 14         #address-cells = <2>;
 15         #size-cells = <2>;
 16 
 17         cpus {
 18                 #address-cells = <1>;
 19                 #size-cells = <0>;
 20 
 21                 cpu0: cpu@0 {
 22                         compatible = "arm,cortex-a53";
 23                         device_type = "cpu";
 24                         reg = <0x0>;
 25                         enable-method = "psci";
 26                 };
 27 
 28                 cpu@1 {
 29                         compatible = "arm,cortex-a53";
 30                         device_type = "cpu";
 31                         reg = <0x1>;
 32                         enable-method = "psci";
 33                 };
 34 
 35                 cpu@2 {
 36                         compatible = "arm,cortex-a53";
 37                         device_type = "cpu";
 38                         reg = <0x2>;
 39                         enable-method = "psci";
 40                 };
 41 
 42                 cpu@3 {
 43                         compatible = "arm,cortex-a53";
 44                         device_type = "cpu";
 45                         reg = <0x3>;
 46                         enable-method = "psci";
 47                 };
 48         };
 49 
 50         psci {
 51                 compatible = "arm,psci-1.0";
 52                 method = "smc";
 53         };
 54 
 55         dcxo24M: dcxo24M-clk {
 56                 compatible = "fixed-clock";
 57                 clock-frequency = <24000000>;
 58                 clock-output-names = "dcxo24M";
 59                 #clock-cells = <0>;
 60         };
 61 
 62         iosc: internal-osc-clk {
 63                 compatible = "fixed-clock";
 64                 clock-frequency = <16000000>;
 65                 clock-accuracy = <300000000>;
 66                 clock-output-names = "iosc";
 67                 #clock-cells = <0>;
 68         };
 69 
 70         osc32k: osc32k-clk {
 71                 compatible = "fixed-clock";
 72                 clock-frequency = <32768>;
 73                 clock-output-names = "osc32k";
 74                 #clock-cells = <0>;
 75         };
 76 
 77         timer {
 78                 compatible = "arm,armv8-timer";
 79                 interrupts = <GIC_PPI 13
 80                         (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
 81                              <GIC_PPI 14
 82                         (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
 83                              <GIC_PPI 11
 84                         (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
 85                              <GIC_PPI 10
 86                         (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 87         };
 88 
 89         soc {
 90                 compatible = "simple-bus";
 91                 #address-cells = <1>;
 92                 #size-cells = <1>;
 93                 ranges = <0 0 0 0x3fffffff>;
 94 
 95                 ccu: clock@3001000 {
 96                         compatible = "allwinner,sun50i-a100-ccu";
 97                         reg = <0x03001000 0x1000>;
 98                         clocks = <&dcxo24M>, <&osc32k>, <&iosc>;
 99                         clock-names = "hosc", "losc", "iosc";
100                         #clock-cells = <1>;
101                         #reset-cells = <1>;
102                 };
103 
104                 dma: dma-controller@3002000 {
105                         compatible = "allwinner,sun50i-a100-dma";
106                         reg = <0x03002000 0x1000>;
107                         interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
108                         clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
109                         clock-names = "bus", "mbus";
110                         resets = <&ccu RST_BUS_DMA>;
111                         dma-channels = <8>;
112                         dma-requests = <52>;
113                         #dma-cells = <1>;
114                 };
115 
116                 gic: interrupt-controller@3021000 {
117                         compatible = "arm,gic-400";
118                         reg = <0x03021000 0x1000>, <0x03022000 0x2000>,
119                               <0x03024000 0x2000>, <0x03026000 0x2000>;
120                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
121                                                  IRQ_TYPE_LEVEL_HIGH)>;
122                         interrupt-controller;
123                         #interrupt-cells = <3>;
124                 };
125 
126                 efuse@3006000 {
127                         compatible = "allwinner,sun50i-a100-sid",
128                                      "allwinner,sun50i-a64-sid";
129                         reg = <0x03006000 0x1000>;
130                         #address-cells = <1>;
131                         #size-cells = <1>;
132 
133                         ths_calibration: calib@14 {
134                                 reg = <0x14 8>;
135                         };
136                 };
137 
138                 pio: pinctrl@300b000 {
139                         compatible = "allwinner,sun50i-a100-pinctrl";
140                         reg = <0x0300b000 0x400>;
141                         interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
142                                      <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
143                                      <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
144                                      <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
145                                      <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
146                                      <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
147                                      <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
148                         clocks = <&ccu CLK_APB1>, <&dcxo24M>, <&osc32k>;
149                         clock-names = "apb", "hosc", "losc";
150                         gpio-controller;
151                         #gpio-cells = <3>;
152                         interrupt-controller;
153                         #interrupt-cells = <3>;
154 
155                         uart0_pb_pins: uart0-pb-pins {
156                                 pins = "PB9", "PB10";
157                                 function = "uart0";
158                         };
159                 };
160 
161                 uart0: serial@5000000 {
162                         compatible = "snps,dw-apb-uart";
163                         reg = <0x05000000 0x400>;
164                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
165                         reg-shift = <2>;
166                         reg-io-width = <4>;
167                         clocks = <&ccu CLK_BUS_UART0>;
168                         resets = <&ccu RST_BUS_UART0>;
169                         status = "disabled";
170                 };
171 
172                 uart1: serial@5000400 {
173                         compatible = "snps,dw-apb-uart";
174                         reg = <0x05000400 0x400>;
175                         interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
176                         reg-shift = <2>;
177                         reg-io-width = <4>;
178                         clocks = <&ccu CLK_BUS_UART1>;
179                         resets = <&ccu RST_BUS_UART1>;
180                         status = "disabled";
181                 };
182 
183                 uart2: serial@5000800 {
184                         compatible = "snps,dw-apb-uart";
185                         reg = <0x05000800 0x400>;
186                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
187                         reg-shift = <2>;
188                         reg-io-width = <4>;
189                         clocks = <&ccu CLK_BUS_UART2>;
190                         resets = <&ccu RST_BUS_UART2>;
191                         status = "disabled";
192                 };
193 
194                 uart3: serial@5000c00 {
195                         compatible = "snps,dw-apb-uart";
196                         reg = <0x05000c00 0x400>;
197                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
198                         reg-shift = <2>;
199                         reg-io-width = <4>;
200                         clocks = <&ccu CLK_BUS_UART3>;
201                         resets = <&ccu RST_BUS_UART3>;
202                         status = "disabled";
203                 };
204 
205                 uart4: serial@5001000 {
206                         compatible = "snps,dw-apb-uart";
207                         reg = <0x05001000 0x400>;
208                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
209                         reg-shift = <2>;
210                         reg-io-width = <4>;
211                         clocks = <&ccu CLK_BUS_UART4>;
212                         resets = <&ccu RST_BUS_UART4>;
213                         status = "disabled";
214                 };
215 
216                 i2c0: i2c@5002000 {
217                         compatible = "allwinner,sun50i-a100-i2c",
218                                      "allwinner,sun8i-v536-i2c",
219                                      "allwinner,sun6i-a31-i2c";
220                         reg = <0x05002000 0x400>;
221                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
222                         clocks = <&ccu CLK_BUS_I2C0>;
223                         resets = <&ccu RST_BUS_I2C0>;
224                         dmas = <&dma 43>, <&dma 43>;
225                         dma-names = "rx", "tx";
226                         status = "disabled";
227                         #address-cells = <1>;
228                         #size-cells = <0>;
229                 };
230 
231                 i2c1: i2c@5002400 {
232                         compatible = "allwinner,sun50i-a100-i2c",
233                                      "allwinner,sun8i-v536-i2c",
234                                      "allwinner,sun6i-a31-i2c";
235                         reg = <0x05002400 0x400>;
236                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
237                         clocks = <&ccu CLK_BUS_I2C1>;
238                         resets = <&ccu RST_BUS_I2C1>;
239                         dmas = <&dma 44>, <&dma 44>;
240                         dma-names = "rx", "tx";
241                         status = "disabled";
242                         #address-cells = <1>;
243                         #size-cells = <0>;
244                 };
245 
246                 i2c2: i2c@5002800 {
247                         compatible = "allwinner,sun50i-a100-i2c",
248                                      "allwinner,sun8i-v536-i2c",
249                                      "allwinner,sun6i-a31-i2c";
250                         reg = <0x05002800 0x400>;
251                         interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
252                         clocks = <&ccu CLK_BUS_I2C2>;
253                         resets = <&ccu RST_BUS_I2C2>;
254                         dmas = <&dma 45>, <&dma 45>;
255                         dma-names = "rx", "tx";
256                         status = "disabled";
257                         #address-cells = <1>;
258                         #size-cells = <0>;
259                 };
260 
261                 i2c3: i2c@5002c00 {
262                         compatible = "allwinner,sun50i-a100-i2c",
263                                      "allwinner,sun8i-v536-i2c",
264                                      "allwinner,sun6i-a31-i2c";
265                         reg = <0x05002c00 0x400>;
266                         interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
267                         clocks = <&ccu CLK_BUS_I2C3>;
268                         resets = <&ccu RST_BUS_I2C3>;
269                         dmas = <&dma 46>, <&dma 46>;
270                         dma-names = "rx", "tx";
271                         status = "disabled";
272                         #address-cells = <1>;
273                         #size-cells = <0>;
274                 };
275 
276                 ths: thermal-sensor@5070400 {
277                         compatible = "allwinner,sun50i-a100-ths";
278                         reg = <0x05070400 0x100>;
279                         interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
280                         clocks = <&ccu CLK_BUS_THS>;
281                         clock-names = "bus";
282                         resets = <&ccu RST_BUS_THS>;
283                         nvmem-cells = <&ths_calibration>;
284                         nvmem-cell-names = "calibration";
285                         #thermal-sensor-cells = <1>;
286                 };
287 
288                 r_ccu: clock@7010000 {
289                         compatible = "allwinner,sun50i-a100-r-ccu";
290                         reg = <0x07010000 0x300>;
291                         clocks = <&dcxo24M>, <&osc32k>, <&iosc>,
292                                  <&ccu CLK_PLL_PERIPH0>;
293                         clock-names = "hosc", "losc", "iosc", "pll-periph";
294                         #clock-cells = <1>;
295                         #reset-cells = <1>;
296                 };
297 
298                 r_intc: interrupt-controller@7010320 {
299                         compatible = "allwinner,sun50i-a100-nmi",
300                                      "allwinner,sun9i-a80-nmi";
301                         interrupt-controller;
302                         #interrupt-cells = <2>;
303                         reg = <0x07010320 0xc>;
304                         interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
305                 };
306 
307                 r_pio: pinctrl@7022000 {
308                         compatible = "allwinner,sun50i-a100-r-pinctrl";
309                         reg = <0x07022000 0x400>;
310                         interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
311                         clocks = <&r_ccu CLK_R_APB1>, <&dcxo24M>, <&osc32k>;
312                         clock-names = "apb", "hosc", "losc";
313                         gpio-controller;
314                         #gpio-cells = <3>;
315                         interrupt-controller;
316                         #interrupt-cells = <3>;
317 
318                         r_i2c0_pins: r-i2c0-pins {
319                                 pins = "PL0", "PL1";
320                                 function = "s_i2c0";
321                         };
322 
323                         r_i2c1_pins: r-i2c1-pins {
324                                 pins = "PL8", "PL9";
325                                 function = "s_i2c1";
326                         };
327                 };
328 
329                 r_uart: serial@7080000 {
330                         compatible = "snps,dw-apb-uart";
331                         reg = <0x07080000 0x400>;
332                         interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
333                         reg-shift = <2>;
334                         reg-io-width = <4>;
335                         clocks = <&r_ccu CLK_R_APB2_UART>;
336                         resets = <&r_ccu RST_R_APB2_UART>;
337                         status = "disabled";
338                 };
339 
340                 r_i2c0: i2c@7081400 {
341                         compatible = "allwinner,sun50i-a100-i2c",
342                                      "allwinner,sun8i-v536-i2c",
343                                      "allwinner,sun6i-a31-i2c";
344                         reg = <0x07081400 0x400>;
345                         interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
346                         clocks = <&r_ccu CLK_R_APB2_I2C0>;
347                         resets = <&r_ccu RST_R_APB2_I2C0>;
348                         dmas = <&dma 50>, <&dma 50>;
349                         dma-names = "rx", "tx";
350                         pinctrl-names = "default";
351                         pinctrl-0 = <&r_i2c0_pins>;
352                         status = "disabled";
353                         #address-cells = <1>;
354                         #size-cells = <0>;
355                 };
356 
357                 r_i2c1: i2c@7081800 {
358                         compatible = "allwinner,sun50i-a100-i2c",
359                                      "allwinner,sun8i-v536-i2c",
360                                      "allwinner,sun6i-a31-i2c";
361                         reg = <0x07081800 0x400>;
362                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
363                         clocks = <&r_ccu CLK_R_APB2_I2C1>;
364                         resets = <&r_ccu RST_R_APB2_I2C1>;
365                         dmas = <&dma 51>, <&dma 51>;
366                         dma-names = "rx", "tx";
367                         pinctrl-names = "default";
368                         pinctrl-0 = <&r_i2c1_pins>;
369                         status = "disabled";
370                         #address-cells = <1>;
371                         #size-cells = <0>;
372                 };
373         };
374 
375         thermal-zones {
376                 cpu-thermal {
377                         polling-delay-passive = <0>;
378                         polling-delay = <0>;
379                         thermal-sensors = <&ths 0>;
380                 };
381 
382                 ddr-thermal {
383                         polling-delay-passive = <0>;
384                         polling-delay = <0>;
385                         thermal-sensors = <&ths 2>;
386                 };
387 
388                 gpu-thermal {
389                         polling-delay-passive = <0>;
390                         polling-delay = <0>;
391                         thermal-sensors = <&ths 1>;
392                 };
393         };
394 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php