~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts

Version: ~ [ linux-6.11-rc3 ] ~ [ linux-6.10.4 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.45 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.104 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.164 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.223 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.281 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.319 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.9 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  2 // Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
  3 
  4 /dts-v1/;
  5 
  6 #include "sun50i-a64.dtsi"
  7 #include "sun50i-a64-cpu-opp.dtsi"
  8 
  9 #include <dt-bindings/gpio/gpio.h>
 10 
 11 / {
 12         model = "FriendlyARM NanoPi A64";
 13         compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64";
 14 
 15         aliases {
 16                 ethernet0 = &emac;
 17                 serial0 = &uart0;
 18         };
 19 
 20         chosen {
 21                 stdout-path = "serial0:115200n8";
 22         };
 23 
 24         hdmi-connector {
 25                 compatible = "hdmi-connector";
 26                 type = "a";
 27 
 28                 port {
 29                         hdmi_con_in: endpoint {
 30                                 remote-endpoint = <&hdmi_out_con>;
 31                         };
 32                 };
 33         };
 34 
 35         leds {
 36                 compatible = "gpio-leds";
 37 
 38                 led {
 39                         label = "nanopi-a64:blue:status";
 40                         gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
 41                 };
 42         };
 43 
 44         wifi_pwrseq: pwrseq {
 45                 compatible = "mmc-pwrseq-simple";
 46                 clocks = <&rtc CLK_OSC32K_FANOUT>;
 47                 clock-names = "ext_clock";
 48                 reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 49         };
 50 };
 51 
 52 &cpu0 {
 53         cpu-supply = <&reg_dcdc2>;
 54 };
 55 
 56 &cpu1 {
 57         cpu-supply = <&reg_dcdc2>;
 58 };
 59 
 60 &cpu2 {
 61         cpu-supply = <&reg_dcdc2>;
 62 };
 63 
 64 &cpu3 {
 65         cpu-supply = <&reg_dcdc2>;
 66 };
 67 
 68 &de {
 69         status = "okay";
 70 };
 71 
 72 &ehci0 {
 73         status = "okay";
 74 };
 75 
 76 &ehci1 {
 77         status = "okay";
 78 };
 79 
 80 &emac {
 81         pinctrl-names = "default";
 82         pinctrl-0 = <&rgmii_pins>;
 83         phy-mode = "rgmii";
 84         phy-handle = <&ext_rgmii_phy>;
 85         phy-supply = <&reg_dcdc1>;
 86         status = "okay";
 87 };
 88 
 89 &hdmi {
 90         hvcc-supply = <&reg_dldo1>;
 91         status = "okay";
 92 };
 93 
 94 &hdmi_out {
 95         hdmi_out_con: endpoint {
 96                 remote-endpoint = <&hdmi_con_in>;
 97         };
 98 };
 99 
100 /* i2c1 connected with gpio headers like pine64, bananapi */
101 &i2c1_pins {
102         bias-pull-up;
103 };
104 
105 &mdio {
106         ext_rgmii_phy: ethernet-phy@1 {
107                 compatible = "ethernet-phy-ieee802.3-c22";
108                 reg = <7>;
109         };
110 };
111 
112 &mmc0 {
113         pinctrl-names = "default";
114         pinctrl-0 = <&mmc0_pins>;
115         vmmc-supply = <&reg_dcdc1>;
116         cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
117         disable-wp;
118         bus-width = <4>;
119         status = "okay";
120 };
121 
122 &mmc1 {
123         pinctrl-names = "default";
124         pinctrl-0 = <&mmc1_pins>;
125         vmmc-supply = <&reg_dcdc1>;
126         vqmmc-supply = <&reg_dldo4>;
127         mmc-pwrseq = <&wifi_pwrseq>;
128         bus-width = <4>;
129         non-removable;
130         status = "okay";
131 
132         rtl8189etv: wifi@1 {
133                 reg = <1>;
134                 interrupt-parent = <&r_pio>;
135                 interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
136                 interrupt-names = "host-wake";
137         };
138 };
139 
140 &ohci0 {
141         status = "okay";
142 };
143 
144 &ohci1 {
145         status = "okay";
146 };
147 
148 &r_rsb {
149         status = "okay";
150 
151         axp803: pmic@3a3 {
152                 compatible = "x-powers,axp803";
153                 reg = <0x3a3>;
154                 interrupt-parent = <&r_intc>;
155                 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
156         };
157 };
158 
159 #include "axp803.dtsi"
160 
161 &ac_power_supply {
162         status = "okay";
163 };
164 
165 &reg_aldo2 {
166         regulator-always-on;
167         regulator-min-microvolt = <1800000>;
168         regulator-max-microvolt = <3300000>;
169         regulator-name = "vcc-pl";
170 };
171 
172 &reg_aldo3 {
173         regulator-always-on;
174         regulator-min-microvolt = <3000000>;
175         regulator-max-microvolt = <3000000>;
176         regulator-name = "vcc-pll-avcc";
177 };
178 
179 &reg_dcdc1 {
180         regulator-always-on;
181         regulator-min-microvolt = <3300000>;
182         regulator-max-microvolt = <3300000>;
183         regulator-name = "vcc-3v3";
184 };
185 
186 &reg_dcdc2 {
187         regulator-always-on;
188         regulator-min-microvolt = <1040000>;
189         regulator-max-microvolt = <1300000>;
190         regulator-name = "vdd-cpux";
191 };
192 
193 /* DCDC3 is polyphased with DCDC2 */
194 
195 &reg_dcdc5 {
196         regulator-always-on;
197         regulator-min-microvolt = <1500000>;
198         regulator-max-microvolt = <1500000>;
199         regulator-name = "vcc-dram";
200 };
201 
202 &reg_dcdc6 {
203         regulator-always-on;
204         regulator-min-microvolt = <1100000>;
205         regulator-max-microvolt = <1100000>;
206         regulator-name = "vdd-sys";
207 };
208 
209 &reg_dldo1 {
210         regulator-always-on;
211         regulator-min-microvolt = <3300000>;
212         regulator-max-microvolt = <3300000>;
213         regulator-name = "vcc-hdmi-dsi";
214 };
215 
216 &reg_dldo4 {
217         regulator-always-on;
218         regulator-min-microvolt = <3000000>;
219         regulator-max-microvolt = <3000000>;
220         regulator-name = "vcc-pg-wifi-io";
221 };
222 
223 &reg_eldo1 {
224         regulator-min-microvolt = <1800000>;
225         regulator-max-microvolt = <1800000>;
226         regulator-name = "cpvdd";
227 };
228 
229 &reg_fldo1 {
230         regulator-min-microvolt = <1200000>;
231         regulator-max-microvolt = <1200000>;
232         regulator-name = "vcc-1v2-hsic";
233 };
234 
235 /*
236  * The A64 chip cannot work without this regulator off, although
237  * it seems to be only driving the AR100 core.
238  * Maybe we don't still know well about CPUs domain.
239  */
240 &reg_fldo2 {
241         regulator-always-on;
242         regulator-min-microvolt = <1100000>;
243         regulator-max-microvolt = <1100000>;
244         regulator-name = "vdd-cpus";
245 };
246 
247 &reg_rtc_ldo {
248         regulator-name = "vcc-rtc";
249 };
250 
251 &simplefb_hdmi {
252         vcc-hdmi-supply = <&reg_dldo1>;
253 };
254 
255 &uart0 {
256         pinctrl-names = "default";
257         pinctrl-0 = <&uart0_pb_pins>;
258         status = "okay";
259 };
260 
261 &usbphy {
262         status = "okay";
263 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php