1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Device Tree Include file for NXP Layerscape-1012A family SoC.
4 *
5 * Copyright 2016 Freescale Semiconductor, Inc.
6 * Copyright 2019-2020 NXP
7 *
8 */
9
10 #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
11 #include <dt-bindings/interrupt-controller/arm-gic.h>
12 #include <dt-bindings/thermal/thermal.h>
13
14 / {
15 compatible = "fsl,ls1012a";
16 interrupt-parent = <&gic>;
17 #address-cells = <2>;
18 #size-cells = <2>;
19
20 aliases {
21 crypto = &crypto;
22 rtc1 = &ftm_alarm0;
23 rtic-a = &rtic_a;
24 rtic-b = &rtic_b;
25 rtic-c = &rtic_c;
26 rtic-d = &rtic_d;
27 sec-mon = &sec_mon;
28 };
29
30 cpus {
31 #address-cells = <1>;
32 #size-cells = <0>;
33
34 cpu0: cpu@0 {
35 device_type = "cpu";
36 compatible = "arm,cortex-a53";
37 reg = <0x0>;
38 clocks = <&clockgen QORIQ_CLK_CMUX 0>;
39 #cooling-cells = <2>;
40 cpu-idle-states = <&CPU_PH20>;
41 };
42 };
43
44 idle-states {
45 /*
46 * PSCI node is not added default, U-boot will add missing
47 * parts if it determines to use PSCI.
48 */
49 entry-method = "psci";
50
51 CPU_PH20: cpu-ph20 {
52 compatible = "arm,idle-state";
53 idle-state-name = "PH20";
54 arm,psci-suspend-param = <0x0>;
55 entry-latency-us = <1000>;
56 exit-latency-us = <1000>;
57 min-residency-us = <3000>;
58 };
59 };
60
61 sysclk: sysclk {
62 compatible = "fixed-clock";
63 #clock-cells = <0>;
64 clock-frequency = <125000000>;
65 clock-output-names = "sysclk";
66 };
67
68 coreclk: coreclk {
69 compatible = "fixed-clock";
70 #clock-cells = <0>;
71 clock-frequency = <100000000>;
72 clock-output-names = "coreclk";
73 };
74
75 timer {
76 compatible = "arm,armv8-timer";
77 interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
78 <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
79 <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
80 <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
81 };
82
83 pmu {
84 compatible = "arm,cortex-a53-pmu";
85 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
86 };
87
88 gic: interrupt-controller@1400000 {
89 compatible = "arm,gic-400";
90 #interrupt-cells = <3>;
91 interrupt-controller;
92 reg = <0x0 0x1401000 0 0x1000>, /* GICD */
93 <0x0 0x1402000 0 0x2000>, /* GICC */
94 <0x0 0x1404000 0 0x2000>, /* GICH */
95 <0x0 0x1406000 0 0x2000>; /* GICV */
96 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
97 };
98
99 reboot {
100 compatible = "syscon-reboot";
101 regmap = <&dcfg>;
102 offset = <0xb0>;
103 mask = <0x02>;
104 };
105
106 thermal-zones {
107 cpu_thermal: cpu-thermal {
108 polling-delay-passive = <1000>;
109 polling-delay = <5000>;
110 thermal-sensors = <&tmu 0>;
111
112 trips {
113 cpu_alert: cpu-alert {
114 temperature = <85000>;
115 hysteresis = <2000>;
116 type = "passive";
117 };
118
119 cpu_crit: cpu-crit {
120 temperature = <95000>;
121 hysteresis = <2000>;
122 type = "critical";
123 };
124 };
125
126 cooling-maps {
127 map0 {
128 trip = <&cpu_alert>;
129 cooling-device =
130 <&cpu0 THERMAL_NO_LIMIT
131 THERMAL_NO_LIMIT>;
132 };
133 };
134 };
135 };
136
137 soc {
138 compatible = "simple-bus";
139 #address-cells = <2>;
140 #size-cells = <2>;
141 ranges;
142
143 qspi: spi@1550000 {
144 compatible = "fsl,ls1021a-qspi";
145 #address-cells = <1>;
146 #size-cells = <0>;
147 reg = <0x0 0x1550000 0x0 0x10000>,
148 <0x0 0x40000000 0x0 0x10000000>;
149 reg-names = "QuadSPI", "QuadSPI-memory";
150 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
151 clock-names = "qspi_en", "qspi";
152 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
153 QORIQ_CLK_PLL_DIV(1)>,
154 <&clockgen QORIQ_CLK_PLATFORM_PLL
155 QORIQ_CLK_PLL_DIV(1)>;
156 status = "disabled";
157 };
158
159 esdhc0: mmc@1560000 {
160 compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
161 reg = <0x0 0x1560000 0x0 0x10000>;
162 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
163 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
164 QORIQ_CLK_PLL_DIV(1)>;
165 voltage-ranges = <1800 1800 3300 3300>;
166 sdhci,auto-cmd12;
167 big-endian;
168 bus-width = <4>;
169 status = "disabled";
170 };
171
172 scfg: scfg@1570000 {
173 compatible = "fsl,ls1012a-scfg", "syscon";
174 reg = <0x0 0x1570000 0x0 0x10000>;
175 big-endian;
176 };
177
178 esdhc1: mmc@1580000 {
179 compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
180 reg = <0x0 0x1580000 0x0 0x10000>;
181 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
182 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
183 QORIQ_CLK_PLL_DIV(1)>;
184 voltage-ranges = <1800 1800 3300 3300>;
185 sdhci,auto-cmd12;
186 big-endian;
187 broken-cd;
188 bus-width = <4>;
189 status = "disabled";
190 };
191
192 crypto: crypto@1700000 {
193 compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
194 "fsl,sec-v4.0";
195 fsl,sec-era = <8>;
196 #address-cells = <1>;
197 #size-cells = <1>;
198 ranges = <0x0 0x00 0x1700000 0x100000>;
199 reg = <0x00 0x1700000 0x0 0x100000>;
200 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
201 dma-coherent;
202
203 sec_jr0: jr@10000 {
204 compatible = "fsl,sec-v5.4-job-ring",
205 "fsl,sec-v5.0-job-ring",
206 "fsl,sec-v4.0-job-ring";
207 reg = <0x10000 0x10000>;
208 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
209 };
210
211 sec_jr1: jr@20000 {
212 compatible = "fsl,sec-v5.4-job-ring",
213 "fsl,sec-v5.0-job-ring",
214 "fsl,sec-v4.0-job-ring";
215 reg = <0x20000 0x10000>;
216 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
217 };
218
219 sec_jr2: jr@30000 {
220 compatible = "fsl,sec-v5.4-job-ring",
221 "fsl,sec-v5.0-job-ring",
222 "fsl,sec-v4.0-job-ring";
223 reg = <0x30000 0x10000>;
224 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
225 };
226
227 sec_jr3: jr@40000 {
228 compatible = "fsl,sec-v5.4-job-ring",
229 "fsl,sec-v5.0-job-ring",
230 "fsl,sec-v4.0-job-ring";
231 reg = <0x40000 0x10000>;
232 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
233 };
234
235 rtic@60000 {
236 compatible = "fsl,sec-v5.4-rtic",
237 "fsl,sec-v5.0-rtic",
238 "fsl,sec-v4.0-rtic";
239 #address-cells = <1>;
240 #size-cells = <1>;
241 reg = <0x60000 0x100>, <0x60e00 0x18>;
242 ranges = <0x0 0x60100 0x500>;
243
244 rtic_a: rtic-a@0 {
245 compatible = "fsl,sec-v5.4-rtic-memory",
246 "fsl,sec-v5.0-rtic-memory",
247 "fsl,sec-v4.0-rtic-memory";
248 reg = <0x00 0x20>, <0x100 0x100>;
249 };
250
251 rtic_b: rtic-b@20 {
252 compatible = "fsl,sec-v5.4-rtic-memory",
253 "fsl,sec-v5.0-rtic-memory",
254 "fsl,sec-v4.0-rtic-memory";
255 reg = <0x20 0x20>, <0x200 0x100>;
256 };
257
258 rtic_c: rtic-c@40 {
259 compatible = "fsl,sec-v5.4-rtic-memory",
260 "fsl,sec-v5.0-rtic-memory",
261 "fsl,sec-v4.0-rtic-memory";
262 reg = <0x40 0x20>, <0x300 0x100>;
263 };
264
265 rtic_d: rtic-d@60 {
266 compatible = "fsl,sec-v5.4-rtic-memory",
267 "fsl,sec-v5.0-rtic-memory",
268 "fsl,sec-v4.0-rtic-memory";
269 reg = <0x60 0x20>, <0x400 0x100>;
270 };
271 };
272 };
273
274 sfp: efuse@1e80000 {
275 compatible = "fsl,ls1021a-sfp";
276 reg = <0x0 0x1e80000 0x0 0x10000>;
277 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
278 QORIQ_CLK_PLL_DIV(4)>;
279 clock-names = "sfp";
280 };
281
282 sec_mon: sec_mon@1e90000 {
283 compatible = "fsl,sec-v5.4-mon", "fsl,sec-v5.0-mon",
284 "fsl,sec-v4.0-mon";
285 reg = <0x0 0x1e90000 0x0 0x10000>;
286 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
287 <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
288 };
289
290 dcfg: dcfg@1ee0000 {
291 compatible = "fsl,ls1012a-dcfg",
292 "syscon";
293 reg = <0x0 0x1ee0000 0x0 0x1000>;
294 big-endian;
295 };
296
297 clockgen: clocking@1ee1000 {
298 compatible = "fsl,ls1012a-clockgen";
299 reg = <0x0 0x1ee1000 0x0 0x1000>;
300 #clock-cells = <2>;
301 clocks = <&sysclk &coreclk>;
302 clock-names = "sysclk", "coreclk";
303 };
304
305 tmu: tmu@1f00000 {
306 compatible = "fsl,qoriq-tmu";
307 reg = <0x0 0x1f00000 0x0 0x10000>;
308 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
309 fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>;
310 fsl,tmu-calibration =
311 <0x00000000 0x00000025>,
312 <0x00000001 0x0000002c>,
313 <0x00000002 0x00000032>,
314 <0x00000003 0x00000039>,
315 <0x00000004 0x0000003f>,
316 <0x00000005 0x00000046>,
317 <0x00000006 0x0000004c>,
318 <0x00000007 0x00000053>,
319 <0x00000008 0x00000059>,
320 <0x00000009 0x0000005f>,
321 <0x0000000a 0x00000066>,
322 <0x0000000b 0x0000006c>,
323
324 <0x00010000 0x00000026>,
325 <0x00010001 0x0000002d>,
326 <0x00010002 0x00000035>,
327 <0x00010003 0x0000003d>,
328 <0x00010004 0x00000045>,
329 <0x00010005 0x0000004d>,
330 <0x00010006 0x00000055>,
331 <0x00010007 0x0000005d>,
332 <0x00010008 0x00000065>,
333 <0x00010009 0x0000006d>,
334
335 <0x00020000 0x00000026>,
336 <0x00020001 0x00000030>,
337 <0x00020002 0x0000003a>,
338 <0x00020003 0x00000044>,
339 <0x00020004 0x0000004e>,
340 <0x00020005 0x00000059>,
341 <0x00020006 0x00000063>,
342
343 <0x00030000 0x00000014>,
344 <0x00030001 0x00000021>,
345 <0x00030002 0x0000002e>,
346 <0x00030003 0x0000003a>,
347 <0x00030004 0x00000047>,
348 <0x00030005 0x00000053>,
349 <0x00030006 0x00000060>;
350 #thermal-sensor-cells = <1>;
351 };
352
353 i2c0: i2c@2180000 {
354 compatible = "fsl,ls1012a-i2c", "fsl,vf610-i2c";
355 #address-cells = <1>;
356 #size-cells = <0>;
357 reg = <0x0 0x2180000 0x0 0x10000>;
358 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
359 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
360 QORIQ_CLK_PLL_DIV(4)>;
361 scl-gpios = <&gpio0 2 0>;
362 status = "disabled";
363 };
364
365 i2c1: i2c@2190000 {
366 compatible = "fsl,ls1012a-i2c", "fsl,vf610-i2c";
367 #address-cells = <1>;
368 #size-cells = <0>;
369 reg = <0x0 0x2190000 0x0 0x10000>;
370 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
371 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
372 QORIQ_CLK_PLL_DIV(4)>;
373 scl-gpios = <&gpio0 13 0>;
374 status = "disabled";
375 };
376
377 dspi: spi@2100000 {
378 compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
379 #address-cells = <1>;
380 #size-cells = <0>;
381 reg = <0x0 0x2100000 0x0 0x10000>;
382 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
383 clock-names = "dspi";
384 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
385 QORIQ_CLK_PLL_DIV(1)>;
386 spi-num-chipselects = <5>;
387 big-endian;
388 status = "disabled";
389 };
390
391 duart0: serial@21c0500 {
392 compatible = "fsl,ns16550", "ns16550a";
393 reg = <0x00 0x21c0500 0x0 0x100>;
394 interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
395 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
396 QORIQ_CLK_PLL_DIV(1)>;
397 status = "disabled";
398 };
399
400 duart1: serial@21c0600 {
401 compatible = "fsl,ns16550", "ns16550a";
402 reg = <0x00 0x21c0600 0x0 0x100>;
403 interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
404 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
405 QORIQ_CLK_PLL_DIV(1)>;
406 status = "disabled";
407 };
408
409 gpio0: gpio@2300000 {
410 compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
411 reg = <0x0 0x2300000 0x0 0x10000>;
412 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
413 gpio-controller;
414 #gpio-cells = <2>;
415 interrupt-controller;
416 #interrupt-cells = <2>;
417 };
418
419 gpio1: gpio@2310000 {
420 compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
421 reg = <0x0 0x2310000 0x0 0x10000>;
422 interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
423 gpio-controller;
424 #gpio-cells = <2>;
425 interrupt-controller;
426 #interrupt-cells = <2>;
427 };
428
429 wdog0: watchdog@2ad0000 {
430 compatible = "fsl,ls1012a-wdt",
431 "fsl,imx21-wdt";
432 reg = <0x0 0x2ad0000 0x0 0x10000>;
433 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
434 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>;
435 big-endian;
436 };
437
438 sai1: sai@2b50000 {
439 #sound-dai-cells = <0>;
440 compatible = "fsl,vf610-sai";
441 reg = <0x0 0x2b50000 0x0 0x10000>;
442 interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
443 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
444 QORIQ_CLK_PLL_DIV(4)>,
445 <&clockgen QORIQ_CLK_PLATFORM_PLL
446 QORIQ_CLK_PLL_DIV(4)>,
447 <&clockgen QORIQ_CLK_PLATFORM_PLL
448 QORIQ_CLK_PLL_DIV(4)>,
449 <&clockgen QORIQ_CLK_PLATFORM_PLL
450 QORIQ_CLK_PLL_DIV(4)>;
451 clock-names = "bus", "mclk1", "mclk2", "mclk3";
452 dma-names = "rx", "tx";
453 dmas = <&edma0 1 46>,
454 <&edma0 1 47>;
455 status = "disabled";
456 };
457
458 sai2: sai@2b60000 {
459 #sound-dai-cells = <0>;
460 compatible = "fsl,vf610-sai";
461 reg = <0x0 0x2b60000 0x0 0x10000>;
462 interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
463 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
464 QORIQ_CLK_PLL_DIV(4)>,
465 <&clockgen QORIQ_CLK_PLATFORM_PLL
466 QORIQ_CLK_PLL_DIV(4)>,
467 <&clockgen QORIQ_CLK_PLATFORM_PLL
468 QORIQ_CLK_PLL_DIV(4)>,
469 <&clockgen QORIQ_CLK_PLATFORM_PLL
470 QORIQ_CLK_PLL_DIV(4)>;
471 clock-names = "bus", "mclk1", "mclk2", "mclk3";
472 dma-names = "rx", "tx";
473 dmas = <&edma0 1 44>,
474 <&edma0 1 45>;
475 status = "disabled";
476 };
477
478 edma0: dma-controller@2c00000 {
479 #dma-cells = <2>;
480 compatible = "fsl,vf610-edma";
481 reg = <0x0 0x2c00000 0x0 0x10000>,
482 <0x0 0x2c10000 0x0 0x10000>,
483 <0x0 0x2c20000 0x0 0x10000>;
484 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
485 <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
486 interrupt-names = "edma-tx", "edma-err";
487 dma-channels = <32>;
488 big-endian;
489 clock-names = "dmamux0", "dmamux1";
490 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
491 QORIQ_CLK_PLL_DIV(4)>,
492 <&clockgen QORIQ_CLK_PLATFORM_PLL
493 QORIQ_CLK_PLL_DIV(4)>;
494 };
495
496 usb0: usb@2f00000 {
497 compatible = "snps,dwc3";
498 reg = <0x0 0x2f00000 0x0 0x10000>;
499 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
500 dr_mode = "host";
501 snps,quirk-frame-length-adjustment = <0x20>;
502 snps,dis_rxdet_inp3_quirk;
503 snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
504 };
505
506 sata: sata@3200000 {
507 compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci";
508 reg = <0x0 0x3200000 0x0 0x10000>,
509 <0x0 0x20140520 0x0 0x4>;
510 reg-names = "ahci", "sata-ecc";
511 interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
512 clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
513 QORIQ_CLK_PLL_DIV(1)>;
514 dma-coherent;
515 status = "disabled";
516 };
517
518 usb1: usb@8600000 {
519 compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
520 reg = <0x0 0x8600000 0x0 0x1000>;
521 interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
522 dr_mode = "host";
523 phy_type = "ulpi";
524 };
525
526 msi: msi-controller1@1572000 {
527 compatible = "fsl,ls1012a-msi";
528 reg = <0x0 0x1572000 0x0 0x8>;
529 msi-controller;
530 interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
531 };
532
533 pcie1: pcie@3400000 {
534 compatible = "fsl,ls1012a-pcie";
535 reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
536 <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
537 reg-names = "regs", "config";
538 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
539 <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
540 interrupt-names = "pme", "aer";
541 #address-cells = <3>;
542 #size-cells = <2>;
543 device_type = "pci";
544 num-viewport = <2>;
545 bus-range = <0x0 0xff>;
546 ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
547 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
548 msi-parent = <&msi>;
549 #interrupt-cells = <1>;
550 interrupt-map-mask = <0 0 0 7>;
551 interrupt-map = <0000 0 0 1 &gic 0 110 IRQ_TYPE_LEVEL_HIGH>,
552 <0000 0 0 2 &gic 0 111 IRQ_TYPE_LEVEL_HIGH>,
553 <0000 0 0 3 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>,
554 <0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
555 big-endian;
556 status = "disabled";
557 };
558
559 rcpm: power-controller@1ee2140 {
560 compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1+";
561 reg = <0x0 0x1ee2140 0x0 0x4>;
562 #fsl,rcpm-wakeup-cells = <1>;
563 };
564
565 ftm_alarm0: rtc@29d0000 {
566 compatible = "fsl,ls1012a-ftm-alarm";
567 reg = <0x0 0x29d0000 0x0 0x10000>;
568 fsl,rcpm-wakeup = <&rcpm 0x20000>;
569 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
570 big-endian;
571 };
572 };
573
574 firmware {
575 optee {
576 compatible = "linaro,optee-tz";
577 method = "smc";
578 };
579 };
580 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.