1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Device Tree Include file for Freescale Layerscape-1046A family SoC.
4 *
5 * Copyright 2016 Freescale Semiconductor, Inc.
6 * Copyright 2018-2019 NXP
7 *
8 * Shaohui Xie <Shaohui.Xie@nxp.com>
9 */
10
11 /dts-v1/;
12
13 #include "fsl-ls1046a.dtsi"
14
15 / {
16 model = "LS1046A QDS Board";
17 compatible = "fsl,ls1046a-qds", "fsl,ls1046a";
18
19 aliases {
20 emi1-slot1 = &ls1046mdio_s1;
21 emi1-slot2 = &ls1046mdio_s2;
22 emi1-slot4 = &ls1046mdio_s4;
23 gpio0 = &gpio0;
24 gpio1 = &gpio1;
25 gpio2 = &gpio2;
26 gpio3 = &gpio3;
27 qsgmii-s2-p1 = &qsgmii_phy_s2_p1;
28 qsgmii-s2-p2 = &qsgmii_phy_s2_p2;
29 qsgmii-s2-p3 = &qsgmii_phy_s2_p3;
30 qsgmii-s2-p4 = &qsgmii_phy_s2_p4;
31 serial0 = &duart0;
32 serial1 = &duart1;
33 serial2 = &duart2;
34 serial3 = &duart3;
35 sgmii-s1-p1 = &sgmii_phy_s1_p1;
36 sgmii-s1-p2 = &sgmii_phy_s1_p2;
37 sgmii-s1-p3 = &sgmii_phy_s1_p3;
38 sgmii-s1-p4 = &sgmii_phy_s1_p4;
39 sgmii-s4-p1 = &sgmii_phy_s4_p1;
40 };
41
42 chosen {
43 stdout-path = "serial0:115200n8";
44 };
45 };
46
47 &dspi {
48 bus-num = <0>;
49 status = "okay";
50
51 flash@0 {
52 #address-cells = <1>;
53 #size-cells = <1>;
54 compatible = "n25q128a11", "jedec,spi-nor";
55 reg = <0>;
56 spi-max-frequency = <10000000>;
57 };
58
59 flash@1 {
60 #address-cells = <1>;
61 #size-cells = <1>;
62 compatible = "sst25wf040b", "jedec,spi-nor";
63 spi-cpol;
64 spi-cpha;
65 reg = <1>;
66 spi-max-frequency = <10000000>;
67 };
68
69 flash@2 {
70 #address-cells = <1>;
71 #size-cells = <1>;
72 compatible = "en25s64", "jedec,spi-nor";
73 spi-cpol;
74 spi-cpha;
75 reg = <2>;
76 spi-max-frequency = <10000000>;
77 };
78 };
79
80 &duart0 {
81 status = "okay";
82 };
83
84 &duart1 {
85 status = "okay";
86 };
87
88 &i2c0 {
89 status = "okay";
90
91 i2c-mux@77 {
92 compatible = "nxp,pca9547";
93 reg = <0x77>;
94 #address-cells = <1>;
95 #size-cells = <0>;
96
97 i2c@2 {
98 #address-cells = <1>;
99 #size-cells = <0>;
100 reg = <0x2>;
101
102 ina220@40 {
103 compatible = "ti,ina220";
104 reg = <0x40>;
105 shunt-resistor = <1000>;
106 };
107
108 ina220@41 {
109 compatible = "ti,ina220";
110 reg = <0x41>;
111 shunt-resistor = <1000>;
112 };
113 };
114
115 i2c@3 {
116 #address-cells = <1>;
117 #size-cells = <0>;
118 reg = <0x3>;
119
120 rtc@51 {
121 compatible = "nxp,pcf2129";
122 reg = <0x51>;
123 /* IRQ10_B */
124 interrupts = <0 150 0x4>;
125 };
126
127 eeprom@56 {
128 compatible = "atmel,24c512";
129 reg = <0x56>;
130 };
131
132 eeprom@57 {
133 compatible = "atmel,24c512";
134 reg = <0x57>;
135 };
136
137 temp-sensor@4c {
138 compatible = "adi,adt7461a";
139 reg = <0x4c>;
140 };
141 };
142 };
143 };
144
145 &ifc {
146 #address-cells = <2>;
147 #size-cells = <1>;
148 /* NOR, NAND Flashes and FPGA on board */
149 ranges = <0x0 0x0 0x0 0x60000000 0x08000000
150 0x1 0x0 0x0 0x7e800000 0x00010000
151 0x2 0x0 0x0 0x7fb00000 0x00000100>;
152 status = "okay";
153
154 flash@0,0 {
155 compatible = "cfi-flash";
156 reg = <0x0 0x0 0x8000000>;
157 big-endian;
158 bank-width = <2>;
159 device-width = <1>;
160 };
161
162 nand@1,0 {
163 compatible = "fsl,ifc-nand";
164 reg = <0x1 0x0 0x10000>;
165 };
166
167 fpga: board-control@2,0 {
168 compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis", "simple-mfd";
169 reg = <0x2 0x0 0x0000100>;
170 ranges = <0 2 0 0x100>;
171 };
172 };
173
174 &lpuart0 {
175 status = "okay";
176 };
177
178 &qspi {
179 status = "okay";
180
181 qflash0: flash@0 {
182 compatible = "spansion,m25p80";
183 #address-cells = <1>;
184 #size-cells = <1>;
185 spi-max-frequency = <50000000>;
186 spi-rx-bus-width = <4>;
187 spi-tx-bus-width = <4>;
188 reg = <0>;
189 };
190 };
191
192 #include "fsl-ls1046-post.dtsi"
193
194 &fman0 {
195 ethernet@e0000 {
196 phy-handle = <&qsgmii_phy_s2_p1>;
197 phy-connection-type = "sgmii";
198 };
199
200 ethernet@e2000 {
201 phy-handle = <&sgmii_phy_s4_p1>;
202 phy-connection-type = "sgmii";
203 };
204
205 ethernet@e4000 {
206 phy-handle = <&rgmii_phy1>;
207 phy-connection-type = "rgmii";
208 };
209
210 ethernet@e6000 {
211 phy-handle = <&rgmii_phy2>;
212 phy-connection-type = "rgmii";
213 };
214
215 ethernet@e8000 {
216 phy-handle = <&sgmii_phy_s1_p3>;
217 phy-connection-type = "sgmii";
218 };
219
220 ethernet@ea000 {
221 phy-handle = <&sgmii_phy_s1_p4>;
222 phy-connection-type = "sgmii";
223 };
224
225 ethernet@f0000 { /* DTSEC9/10GEC1 */
226 phy-handle = <&sgmii_phy_s1_p1>;
227 phy-connection-type = "xgmii";
228 };
229
230 ethernet@f2000 { /* DTSEC10/10GEC2 */
231 phy-handle = <&sgmii_phy_s1_p2>;
232 phy-connection-type = "xgmii";
233 };
234 };
235
236 &fpga {
237 #address-cells = <1>;
238 #size-cells = <1>;
239
240 mdio-mux@54 {
241 compatible = "mdio-mux-mmioreg", "mdio-mux";
242 mdio-parent-bus = <&mdio0>;
243 #address-cells = <1>;
244 #size-cells = <0>;
245 reg = <0x54 1>; /* BRDCFG4 */
246 mux-mask = <0xe0>; /* EMI1 */
247
248 /* On-board RGMII1 PHY */
249 ls1046mdio0: mdio@0 {
250 reg = <0>;
251 #address-cells = <1>;
252 #size-cells = <0>;
253
254 rgmii_phy1: ethernet-phy@1 { /* MAC3 */
255 reg = <0x1>;
256 };
257 };
258
259 /* On-board RGMII2 PHY */
260 ls1046mdio1: mdio@1 {
261 reg = <0x20>;
262 #address-cells = <1>;
263 #size-cells = <0>;
264
265 rgmii_phy2: ethernet-phy@2 { /* MAC4 */
266 reg = <0x2>;
267 };
268 };
269
270 /* Slot 1 */
271 ls1046mdio_s1: mdio@2 {
272 reg = <0x40>;
273 #address-cells = <1>;
274 #size-cells = <0>;
275 status = "disabled";
276
277 sgmii_phy_s1_p1: ethernet-phy@1c {
278 reg = <0x1c>;
279 };
280
281 sgmii_phy_s1_p2: ethernet-phy@1d {
282 reg = <0x1d>;
283 };
284
285 sgmii_phy_s1_p3: ethernet-phy@1e {
286 reg = <0x1e>;
287 };
288
289 sgmii_phy_s1_p4: ethernet-phy@1f {
290 reg = <0x1f>;
291 };
292 };
293
294 /* Slot 2 */
295 ls1046mdio_s2: mdio@3 {
296 reg = <0x60>;
297 #address-cells = <1>;
298 #size-cells = <0>;
299 status = "disabled";
300
301 qsgmii_phy_s2_p1: ethernet-phy@8 {
302 reg = <0x8>;
303 };
304
305 qsgmii_phy_s2_p2: ethernet-phy@9 {
306 reg = <0x9>;
307 };
308
309 qsgmii_phy_s2_p3: ethernet-phy@a {
310 reg = <0xa>;
311 };
312
313 qsgmii_phy_s2_p4: ethernet-phy@b {
314 reg = <0xb>;
315 };
316 };
317
318 /* Slot 4 */
319 ls1046mdio_s4: mdio@5 {
320 reg = <0x80>;
321 #address-cells = <1>;
322 #size-cells = <0>;
323 status = "disabled";
324
325 sgmii_phy_s4_p1: ethernet-phy@1c {
326 reg = <0x1c>;
327 };
328 };
329 };
330 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.