~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi

Version: ~ [ linux-6.12-rc7 ] ~ [ linux-6.11.7 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.60 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.116 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.171 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.229 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.285 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.323 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.9 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  2 /*
  3  * Copyright 2020 NXP
  4  */
  5 
  6 /dts-v1/;
  7 
  8 #include <dt-bindings/phy/phy-imx8-pcie.h>
  9 #include <dt-bindings/usb/pd.h>
 10 #include "imx8mm.dtsi"
 11 
 12 / {
 13         chosen {
 14                 stdout-path = &uart2;
 15         };
 16 
 17         memory@40000000 {
 18                 device_type = "memory";
 19                 reg = <0x0 0x40000000 0 0x80000000>;
 20         };
 21 
 22         hdmi-connector {
 23                 compatible = "hdmi-connector";
 24                 label = "hdmi";
 25                 type = "a";
 26 
 27                 port {
 28                         hdmi_connector_in: endpoint {
 29                                 remote-endpoint = <&adv7535_out>;
 30                         };
 31                 };
 32         };
 33 
 34         leds {
 35                 compatible = "gpio-leds";
 36                 pinctrl-names = "default";
 37                 pinctrl-0 = <&pinctrl_gpio_led>;
 38 
 39                 status {
 40                         label = "status";
 41                         gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
 42                         default-state = "on";
 43                 };
 44         };
 45 
 46         pcie0_refclk: pcie0-refclk {
 47                 compatible = "fixed-clock";
 48                 #clock-cells = <0>;
 49                 clock-frequency = <100000000>;
 50         };
 51 
 52         reg_pcie0: regulator-pcie {
 53                 compatible = "regulator-fixed";
 54                 pinctrl-names = "default";
 55                 pinctrl-0 = <&pinctrl_pcie0_reg>;
 56                 regulator-name = "MPCIE_3V3";
 57                 regulator-min-microvolt = <3300000>;
 58                 regulator-max-microvolt = <3300000>;
 59                 gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 60                 enable-active-high;
 61         };
 62 
 63         reg_usdhc2_vmmc: regulator-usdhc2 {
 64                 compatible = "regulator-fixed";
 65                 pinctrl-names = "default";
 66                 pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
 67                 regulator-name = "VSD_3V3";
 68                 regulator-min-microvolt = <3300000>;
 69                 regulator-max-microvolt = <3300000>;
 70                 gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 71                 off-on-delay-us = <20000>;
 72                 enable-active-high;
 73         };
 74 
 75         reg_1v5: regulator-1v5 {
 76                 compatible = "regulator-fixed";
 77                 regulator-name = "VDD_1V5";
 78                 regulator-min-microvolt = <1500000>;
 79                 regulator-max-microvolt = <1500000>;
 80         };
 81 
 82         reg_1v8: regulator-1v8 {
 83                 compatible = "regulator-fixed";
 84                 regulator-name = "VDD_1V8";
 85                 regulator-min-microvolt = <1800000>;
 86                 regulator-max-microvolt = <1800000>;
 87         };
 88 
 89         reg_vddext_3v3: regulator-vddext-3v3 {
 90                 compatible = "regulator-fixed";
 91                 regulator-name = "VDDEXT_3V3";
 92                 regulator-min-microvolt = <3300000>;
 93                 regulator-max-microvolt = <3300000>;
 94         };
 95 
 96         backlight: backlight {
 97                 compatible = "pwm-backlight";
 98                 pwms = <&pwm1 0 5000000 0>;
 99                 brightness-levels = <0 255>;
100                 num-interpolated-steps = <255>;
101                 default-brightness-level = <250>;
102         };
103 
104         ir-receiver {
105                 compatible = "gpio-ir-receiver";
106                 gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
107                 pinctrl-names = "default";
108                 pinctrl-0 = <&pinctrl_ir>;
109                 linux,autosuspend-period = <125>;
110         };
111 
112         audio_codec_bt_sco: audio-codec-bt-sco {
113                 compatible = "linux,bt-sco";
114                 #sound-dai-cells = <1>;
115         };
116 
117         wm8524: audio-codec {
118                 #sound-dai-cells = <0>;
119                 compatible = "wlf,wm8524";
120                 pinctrl-names = "default";
121                 pinctrl-0 = <&pinctrl_gpio_wlf>;
122                 wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
123         };
124 
125         sound-bt-sco {
126                 compatible = "simple-audio-card";
127                 simple-audio-card,name = "bt-sco-audio";
128                 simple-audio-card,format = "dsp_a";
129                 simple-audio-card,bitclock-inversion;
130                 simple-audio-card,frame-master = <&btcpu>;
131                 simple-audio-card,bitclock-master = <&btcpu>;
132 
133                 btcpu: simple-audio-card,cpu {
134                         sound-dai = <&sai2>;
135                         dai-tdm-slot-num = <2>;
136                         dai-tdm-slot-width = <16>;
137                 };
138 
139                 simple-audio-card,codec {
140                         sound-dai = <&audio_codec_bt_sco 1>;
141                 };
142         };
143 
144         sound-wm8524 {
145                 compatible = "simple-audio-card";
146                 simple-audio-card,name = "wm8524-audio";
147                 simple-audio-card,format = "i2s";
148                 simple-audio-card,frame-master = <&cpudai>;
149                 simple-audio-card,bitclock-master = <&cpudai>;
150                 simple-audio-card,widgets =
151                         "Line", "Left Line Out Jack",
152                         "Line", "Right Line Out Jack";
153                 simple-audio-card,routing =
154                         "Left Line Out Jack", "LINEVOUTL",
155                         "Right Line Out Jack", "LINEVOUTR";
156 
157                 cpudai: simple-audio-card,cpu {
158                         sound-dai = <&sai3>;
159                         dai-tdm-slot-num = <2>;
160                         dai-tdm-slot-width = <32>;
161                 };
162 
163                 simple-audio-card,codec {
164                         sound-dai = <&wm8524>;
165                         clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
166                 };
167         };
168 
169         sound-micfil {
170                 compatible = "fsl,imx-audio-card";
171                 model = "micfil-audio";
172 
173                 pri-dai-link {
174                         link-name = "micfil hifi";
175                         format = "i2s";
176 
177                         cpu {
178                                 sound-dai = <&micfil>;
179                         };
180                 };
181         };
182 
183         spdif_out: spdif-out {
184                 compatible = "linux,spdif-dit";
185                 #sound-dai-cells = <0>;
186         };
187 
188         spdif_in: spdif-in {
189                 compatible = "linux,spdif-dir";
190                 #sound-dai-cells = <0>;
191         };
192 
193         sound-spdif {
194                 compatible = "fsl,imx-audio-spdif";
195                 model = "imx-spdif";
196                 audio-cpu = <&spdif1>;
197                 audio-codec = <&spdif_out>, <&spdif_in>;
198         };
199 };
200 
201 &A53_0 {
202         cpu-supply = <&buck2_reg>;
203 };
204 
205 &A53_1 {
206         cpu-supply = <&buck2_reg>;
207 };
208 
209 &A53_2 {
210         cpu-supply = <&buck2_reg>;
211 };
212 
213 &A53_3 {
214         cpu-supply = <&buck2_reg>;
215 };
216 
217 &fec1 {
218         pinctrl-names = "default";
219         pinctrl-0 = <&pinctrl_fec1>;
220         phy-mode = "rgmii-id";
221         phy-handle = <&ethphy0>;
222         fsl,magic-packet;
223         status = "okay";
224 
225         mdio {
226                 #address-cells = <1>;
227                 #size-cells = <0>;
228 
229                 ethphy0: ethernet-phy@0 {
230                         compatible = "ethernet-phy-ieee802.3-c22";
231                         reg = <0>;
232                         reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
233                         reset-assert-us = <10000>;
234                         qca,disable-smarteee;
235                         vddio-supply = <&vddio>;
236 
237                         vddio: vddio-regulator {
238                                 regulator-min-microvolt = <1800000>;
239                                 regulator-max-microvolt = <1800000>;
240                         };
241                 };
242         };
243 };
244 
245 &i2c1 {
246         clock-frequency = <400000>;
247         pinctrl-names = "default";
248         pinctrl-0 = <&pinctrl_i2c1>;
249         status = "okay";
250 
251         pmic@4b {
252                 compatible = "rohm,bd71847";
253                 reg = <0x4b>;
254                 pinctrl-names = "default";
255                 pinctrl-0 = <&pinctrl_pmic>;
256                 interrupt-parent = <&gpio1>;
257                 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
258                 rohm,reset-snvs-powered;
259 
260                 #clock-cells = <0>;
261                 clocks = <&osc_32k>;
262                 clock-output-names = "clk-32k-out";
263 
264                 regulators {
265                         buck1_reg: BUCK1 {
266                                 regulator-name = "buck1";
267                                 regulator-min-microvolt = <700000>;
268                                 regulator-max-microvolt = <1300000>;
269                                 regulator-boot-on;
270                                 regulator-always-on;
271                                 regulator-ramp-delay = <1250>;
272                         };
273 
274                         buck2_reg: BUCK2 {
275                                 regulator-name = "buck2";
276                                 regulator-min-microvolt = <700000>;
277                                 regulator-max-microvolt = <1300000>;
278                                 regulator-boot-on;
279                                 regulator-always-on;
280                                 regulator-ramp-delay = <1250>;
281                                 rohm,dvs-run-voltage = <1000000>;
282                                 rohm,dvs-idle-voltage = <900000>;
283                         };
284 
285                         buck3_reg: BUCK3 {
286                                 // BUCK5 in datasheet
287                                 regulator-name = "buck3";
288                                 regulator-min-microvolt = <700000>;
289                                 regulator-max-microvolt = <1350000>;
290                                 regulator-boot-on;
291                                 regulator-always-on;
292                         };
293 
294                         buck4_reg: BUCK4 {
295                                 // BUCK6 in datasheet
296                                 regulator-name = "buck4";
297                                 regulator-min-microvolt = <3000000>;
298                                 regulator-max-microvolt = <3300000>;
299                                 regulator-boot-on;
300                                 regulator-always-on;
301                         };
302 
303                         buck5_reg: BUCK5 {
304                                 // BUCK7 in datasheet
305                                 regulator-name = "buck5";
306                                 regulator-min-microvolt = <1605000>;
307                                 regulator-max-microvolt = <1995000>;
308                                 regulator-boot-on;
309                                 regulator-always-on;
310                         };
311 
312                         buck6_reg: BUCK6 {
313                                 // BUCK8 in datasheet
314                                 regulator-name = "buck6";
315                                 regulator-min-microvolt = <800000>;
316                                 regulator-max-microvolt = <1400000>;
317                                 regulator-boot-on;
318                                 regulator-always-on;
319                         };
320 
321                         ldo1_reg: LDO1 {
322                                 regulator-name = "ldo1";
323                                 regulator-min-microvolt = <1600000>;
324                                 regulator-max-microvolt = <3300000>;
325                                 regulator-boot-on;
326                                 regulator-always-on;
327                         };
328 
329                         ldo2_reg: LDO2 {
330                                 regulator-name = "ldo2";
331                                 regulator-min-microvolt = <800000>;
332                                 regulator-max-microvolt = <900000>;
333                                 regulator-boot-on;
334                                 regulator-always-on;
335                         };
336 
337                         ldo3_reg: LDO3 {
338                                 regulator-name = "ldo3";
339                                 regulator-min-microvolt = <1800000>;
340                                 regulator-max-microvolt = <3300000>;
341                                 regulator-boot-on;
342                                 regulator-always-on;
343                         };
344 
345                         ldo4_reg: LDO4 {
346                                 regulator-name = "ldo4";
347                                 regulator-min-microvolt = <900000>;
348                                 regulator-max-microvolt = <1800000>;
349                                 regulator-boot-on;
350                                 regulator-always-on;
351                         };
352 
353                         ldo6_reg: LDO6 {
354                                 regulator-name = "ldo6";
355                                 regulator-min-microvolt = <900000>;
356                                 regulator-max-microvolt = <1800000>;
357                                 regulator-boot-on;
358                                 regulator-always-on;
359                         };
360                 };
361         };
362 };
363 
364 &i2c2 {
365         clock-frequency = <400000>;
366         pinctrl-names = "default";
367         pinctrl-0 = <&pinctrl_i2c2>;
368         status = "okay";
369 
370         hdmi@3d {
371                 compatible = "adi,adv7535";
372                 reg = <0x3d>;
373                 interrupt-parent = <&gpio1>;
374                 interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
375                 adi,dsi-lanes = <4>;
376                 avdd-supply = <&buck5_reg>;
377                 dvdd-supply = <&buck5_reg>;
378                 pvdd-supply = <&buck5_reg>;
379                 a2vdd-supply = <&buck5_reg>;
380                 v3p3-supply = <&reg_vddext_3v3>;
381                 v1p2-supply = <&buck5_reg>;
382 
383                 ports {
384                         #address-cells = <1>;
385                         #size-cells = <0>;
386 
387                         port@0 {
388                                 reg = <0>;
389 
390                                 adv7535_in: endpoint {
391                                         remote-endpoint = <&dsi_out>;
392                                 };
393                         };
394 
395                         port@1 {
396                                 reg = <1>;
397 
398                                 adv7535_out: endpoint {
399                                         remote-endpoint = <&hdmi_connector_in>;
400                                 };
401                         };
402 
403                 };
404         };
405 
406         ptn5110: tcpc@50 {
407                 compatible = "nxp,ptn5110", "tcpci";
408                 pinctrl-names = "default";
409                 pinctrl-0 = <&pinctrl_typec1>;
410                 reg = <0x50>;
411                 interrupt-parent = <&gpio2>;
412                 interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
413                 status = "okay";
414 
415                 typec1_con: connector {
416                         compatible = "usb-c-connector";
417                         label = "USB-C";
418                         power-role = "dual";
419                         data-role = "dual";
420                         try-power-role = "sink";
421                         source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
422                         sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
423                                      PDO_VAR(5000, 20000, 3000)>;
424                         op-sink-microwatt = <15000000>;
425                         self-powered;
426 
427                         port {
428                                 typec1_dr_sw: endpoint {
429                                         remote-endpoint = <&usb1_drd_sw>;
430                                 };
431                         };
432                 };
433         };
434 };
435 
436 
437 &csi {
438         status = "okay";
439 };
440 
441 &i2c3 {
442         clock-frequency = <400000>;
443         pinctrl-names = "default";
444         pinctrl-0 = <&pinctrl_i2c3>;
445         status = "okay";
446 
447         pca6416: gpio@20 {
448                 compatible = "nxp,pca6416";
449                 reg = <0x20>;
450                 gpio-controller;
451                 #gpio-cells = <2>;
452                 vcc-supply = <&buck4_reg>;
453         };
454 
455         camera@3c {
456                 compatible = "ovti,ov5640";
457                 reg = <0x3c>;
458                 pinctrl-names = "default";
459                 pinctrl-0 = <&pinctrl_camera>;
460                 clocks = <&clk IMX8MM_CLK_CLKO1>;
461                 clock-names = "xclk";
462                 assigned-clocks = <&clk IMX8MM_CLK_CLKO1>;
463                 assigned-clock-parents = <&clk IMX8MM_CLK_24M>;
464                 assigned-clock-rates = <24000000>;
465                 powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
466                 reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
467                 DOVDD-supply = <&buck5_reg>;
468                 AVDD-supply = <&reg_1v8>;
469                 DVDD-supply = <&reg_1v5>;
470 
471                 port {
472                         ov5640_to_mipi_csi2: endpoint {
473                                 remote-endpoint = <&imx8mm_mipi_csi_in>;
474                                 clock-lanes = <0>;
475                                 data-lanes = <1 2>;
476                         };
477                 };
478         };
479 };
480 
481 &lcdif {
482         status = "okay";
483 };
484 
485 &micfil {
486         #sound-dai-cells = <0>;
487         pinctrl-names = "default";
488         pinctrl-0 = <&pinctrl_pdm>;
489         assigned-clocks = <&clk IMX8MM_CLK_PDM>;
490         assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
491         assigned-clock-rates = <196608000>;
492         status = "okay";
493 };
494 
495 &mipi_csi {
496         status = "okay";
497 
498         ports {
499                 port@0 {
500                         imx8mm_mipi_csi_in: endpoint {
501                                 remote-endpoint = <&ov5640_to_mipi_csi2>;
502                                 data-lanes = <1 2>;
503                         };
504                 };
505         };
506 };
507 
508 &mipi_dsi {
509         samsung,esc-clock-frequency = <10000000>;
510         status = "okay";
511 
512         ports {
513                 port@1 {
514                         reg = <1>;
515 
516                         dsi_out: endpoint {
517                                 remote-endpoint = <&adv7535_in>;
518                                 data-lanes = <1 2 3 4>;
519                         };
520                 };
521         };
522 };
523 
524 &pcie_phy {
525         fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
526         fsl,tx-deemph-gen1 = <0x2d>;
527         fsl,tx-deemph-gen2 = <0xf>;
528         clocks = <&pcie0_refclk>;
529         status = "okay";
530 };
531 
532 &pcie0 {
533         pinctrl-names = "default";
534         pinctrl-0 = <&pinctrl_pcie0>;
535         reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
536         clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
537                  <&clk IMX8MM_CLK_PCIE1_AUX>;
538         assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
539                           <&clk IMX8MM_CLK_PCIE1_CTRL>;
540         assigned-clock-rates = <10000000>, <250000000>;
541         assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
542                                  <&clk IMX8MM_SYS_PLL2_250M>;
543         vpcie-supply = <&reg_pcie0>;
544         status = "okay";
545 };
546 
547 &sai2 {
548         #sound-dai-cells = <0>;
549         pinctrl-names = "default";
550         pinctrl-0 = <&pinctrl_sai2>;
551         assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
552         assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
553         assigned-clock-rates = <24576000>;
554         status = "okay";
555 };
556 
557 &sai3 {
558         pinctrl-names = "default";
559         pinctrl-0 = <&pinctrl_sai3>;
560         assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
561         assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
562         assigned-clock-rates = <24576000>;
563         status = "okay";
564 };
565 
566 &snvs_pwrkey {
567         status = "okay";
568 };
569 
570 &spdif1 {
571         pinctrl-names = "default";
572         pinctrl-0 = <&pinctrl_spdif1>;
573         assigned-clocks = <&clk IMX8MM_CLK_SPDIF1>;
574         assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
575         assigned-clock-rates = <24576000>;
576         clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_24M>,
577                  <&clk IMX8MM_CLK_SPDIF1>, <&clk IMX8MM_CLK_DUMMY>,
578                  <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
579                  <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_DUMMY>,
580                  <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
581                  <&clk IMX8MM_AUDIO_PLL1_OUT>, <&clk IMX8MM_AUDIO_PLL2_OUT>;
582         clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3",
583                       "rxtx4", "rxtx5", "rxtx6", "rxtx7", "spba",
584                       "pll8k", "pll11k";
585         status = "okay";
586 };
587 
588 &uart2 { /* console */
589         pinctrl-names = "default";
590         pinctrl-0 = <&pinctrl_uart2>;
591         status = "okay";
592 };
593 
594 &usbphynop1 {
595         wakeup-source;
596 };
597 
598 &usbotg1 {
599         dr_mode = "otg";
600         hnp-disable;
601         srp-disable;
602         adp-disable;
603         usb-role-switch;
604         disable-over-current;
605         samsung,picophy-pre-emp-curr-control = <3>;
606         samsung,picophy-dc-vol-level-adjust = <7>;
607         status = "okay";
608 
609         port {
610                 usb1_drd_sw: endpoint {
611                         remote-endpoint = <&typec1_dr_sw>;
612                 };
613         };
614 };
615 
616 &usdhc2 {
617         assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
618         assigned-clock-rates = <200000000>;
619         pinctrl-names = "default", "state_100mhz", "state_200mhz";
620         pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
621         pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
622         pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
623         cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
624         bus-width = <4>;
625         vmmc-supply = <&reg_usdhc2_vmmc>;
626         status = "okay";
627 };
628 
629 &wdog1 {
630         pinctrl-names = "default";
631         pinctrl-0 = <&pinctrl_wdog>;
632         fsl,ext-reset-output;
633         status = "okay";
634 };
635 
636 &pwm1 {
637         pinctrl-names = "default";
638         pinctrl-0 = <&pinctrl_backlight>;
639         status = "okay";
640 };
641 
642 &iomuxc {
643         pinctrl_fec1: fec1grp {
644                 fsl,pins = <
645                         MX8MM_IOMUXC_ENET_MDC_ENET1_MDC                 0x3
646                         MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO               0x3
647                         MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3           0x1f
648                         MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2           0x1f
649                         MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1           0x1f
650                         MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0           0x1f
651                         MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3           0x91
652                         MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2           0x91
653                         MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1           0x91
654                         MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0           0x91
655                         MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC           0x1f
656                         MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC           0x91
657                         MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL     0x91
658                         MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL     0x1f
659                         MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22                0x19
660                 >;
661         };
662 
663         pinctrl_gpio_led: gpioledgrp {
664                 fsl,pins = <
665                         MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16    0x19
666                 >;
667         };
668 
669         pinctrl_ir: irgrp {
670                 fsl,pins = <
671                         MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13              0x4f
672                 >;
673         };
674 
675         pinctrl_gpio_wlf: gpiowlfgrp {
676                 fsl,pins = <
677                         MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21        0xd6
678                 >;
679         };
680 
681         pinctrl_i2c1: i2c1grp {
682                 fsl,pins = <
683                         MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL                  0x400001c3
684                         MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA                  0x400001c3
685                 >;
686         };
687 
688         pinctrl_i2c2: i2c2grp {
689                 fsl,pins = <
690                         MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL                  0x400001c3
691                         MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA                  0x400001c3
692                 >;
693         };
694 
695         pinctrl_i2c3: i2c3grp {
696                 fsl,pins = <
697                         MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL                  0x400001c3
698                         MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA                  0x400001c3
699                 >;
700         };
701 
702         pinctrl_pcie0: pcie0grp {
703                 fsl,pins = <
704                         MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B    0x61
705                         MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21       0x41
706                 >;
707         };
708 
709         pinctrl_pcie0_reg: pcie0reggrp {
710                 fsl,pins = <
711                         MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5       0x41
712                 >;
713         };
714 
715         pinctrl_pdm: pdmgrp {
716                 fsl,pins = <
717                         MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK        0xd6
718                         MX8MM_IOMUXC_SAI5_RXC_PDM_CLK           0xd6
719                         MX8MM_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC     0xd6
720                         MX8MM_IOMUXC_SAI5_RXD0_PDM_DATA0        0xd6
721                         MX8MM_IOMUXC_SAI5_RXD1_PDM_DATA1        0xd6
722                         MX8MM_IOMUXC_SAI5_RXD2_PDM_DATA2        0xd6
723                         MX8MM_IOMUXC_SAI5_RXD3_PDM_DATA3        0xd6
724                 >;
725         };
726 
727         pinctrl_pmic: pmicirqgrp {
728                 fsl,pins = <
729                         MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3               0x141
730                 >;
731         };
732 
733         pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
734                 fsl,pins = <
735                         MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19     0x41
736                 >;
737         };
738 
739         pinctrl_sai2: sai2grp {
740                 fsl,pins = <
741                         MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK      0xd6
742                         MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC     0xd6
743                         MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0    0xd6
744                         MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0    0xd6
745                 >;
746         };
747 
748         pinctrl_sai3: sai3grp {
749                 fsl,pins = <
750                         MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
751                         MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
752                         MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
753                         MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
754                 >;
755         };
756 
757         pinctrl_spdif1: spdif1grp {
758                 fsl,pins = <
759                         MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT        0xd6
760                         MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN         0xd6
761                 >;
762         };
763 
764         pinctrl_typec1: typec1grp {
765                 fsl,pins = <
766                         MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11      0x159
767                 >;
768         };
769 
770         pinctrl_uart2: uart2grp {
771                 fsl,pins = <
772                         MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
773                         MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
774                 >;
775         };
776 
777         pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
778                 fsl,pins = <
779                         MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15      0x1c4
780                 >;
781         };
782 
783         pinctrl_usdhc2: usdhc2grp {
784                 fsl,pins = <
785                         MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         0x190
786                         MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         0x1d0
787                         MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d0
788                         MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d0
789                         MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d0
790                         MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d0
791                         MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
792                 >;
793         };
794 
795         pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
796                 fsl,pins = <
797                         MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         0x194
798                         MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         0x1d4
799                         MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d4
800                         MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d4
801                         MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d4
802                         MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d4
803                         MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
804                 >;
805         };
806 
807         pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
808                 fsl,pins = <
809                         MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         0x196
810                         MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         0x1d6
811                         MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d6
812                         MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d6
813                         MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d6
814                         MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d6
815                         MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
816                 >;
817         };
818 
819         pinctrl_wdog: wdoggrp {
820                 fsl,pins = <
821                         MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B    0x166
822                 >;
823         };
824 
825         pinctrl_backlight: backlightgrp {
826                 fsl,pins = <
827                         MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT        0x06
828                 >;
829         };
830 
831         pinctrl_camera: cameragrp {
832                 fsl,pins = <
833                         MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6               0x19
834                         MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7               0x19
835                         MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1      0x59
836                 >;
837         };
838 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php