~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi

Version: ~ [ linux-6.11-rc3 ] ~ [ linux-6.10.4 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.45 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.104 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.164 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.223 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.281 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.319 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.9 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  2 /*
  3  * Copyright 2020 Gateworks Corporation
  4  */
  5 
  6 #include <dt-bindings/gpio/gpio.h>
  7 #include <dt-bindings/leds/common.h>
  8 #include <dt-bindings/phy/phy-imx8-pcie.h>
  9 
 10 / {
 11         aliases {
 12                 ethernet1 = &eth1;
 13                 usb0 = &usbotg1;
 14                 usb1 = &usbotg2;
 15         };
 16 
 17         led-controller {
 18                 compatible = "gpio-leds";
 19                 pinctrl-names = "default";
 20                 pinctrl-0 = <&pinctrl_gpio_leds>;
 21 
 22                 led-0 {
 23                         function = LED_FUNCTION_STATUS;
 24                         color = <LED_COLOR_ID_GREEN>;
 25                         gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
 26                         default-state = "on";
 27                         linux,default-trigger = "heartbeat";
 28                 };
 29 
 30                 led-1 {
 31                         function = LED_FUNCTION_STATUS;
 32                         color = <LED_COLOR_ID_RED>;
 33                         gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
 34                         default-state = "off";
 35                 };
 36         };
 37 
 38         pcie0_refclk: pcie0-refclk {
 39                 compatible = "fixed-clock";
 40                 #clock-cells = <0>;
 41                 clock-frequency = <100000000>;
 42         };
 43 
 44         pps {
 45                 compatible = "pps-gpio";
 46                 pinctrl-names = "default";
 47                 pinctrl-0 = <&pinctrl_pps>;
 48                 gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 49                 status = "okay";
 50         };
 51 
 52         reg_3p3v: regulator-3p3v {
 53                 compatible = "regulator-fixed";
 54                 regulator-name = "3P3V";
 55                 regulator-min-microvolt = <3300000>;
 56                 regulator-max-microvolt = <3300000>;
 57                 regulator-always-on;
 58         };
 59 
 60         reg_usb_otg1_vbus: regulator-usb-otg1 {
 61                 pinctrl-names = "default";
 62                 pinctrl-0 = <&pinctrl_reg_usb1_en>;
 63                 compatible = "regulator-fixed";
 64                 regulator-name = "usb_otg1_vbus";
 65                 gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 66                 enable-active-high;
 67                 regulator-min-microvolt = <5000000>;
 68                 regulator-max-microvolt = <5000000>;
 69         };
 70 
 71         reg_usb_otg2_vbus: regulator-usb-otg2 {
 72                 pinctrl-names = "default";
 73                 pinctrl-0 = <&pinctrl_reg_usb2_en>;
 74                 compatible = "regulator-fixed";
 75                 regulator-name = "usb_otg2_vbus";
 76                 gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 77                 enable-active-high;
 78                 regulator-min-microvolt = <5000000>;
 79                 regulator-max-microvolt = <5000000>;
 80         };
 81 };
 82 
 83 /* off-board header */
 84 &ecspi2 {
 85         pinctrl-names = "default";
 86         pinctrl-0 = <&pinctrl_spi2>;
 87         cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
 88                    <&gpio1 10 GPIO_ACTIVE_LOW>;
 89         status = "okay";
 90 
 91         tpm@1 {
 92                 compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 93                 reg = <0x1>;
 94                 spi-max-frequency = <36000000>;
 95         };
 96 };
 97 
 98 &gpio1 {
 99         gpio-line-names = "rs485_term", "mipi_gpio4", "", "",
100                 "", "", "pci_usb_sel", "dio0",
101                 "", "dio1", "", "", "", "", "", "",
102                 "", "", "", "", "", "", "", "",
103                 "", "", "", "", "", "", "", "";
104 };
105 
106 &gpio4 {
107         gpio-line-names = "rs485_en", "mipi_gpio3", "rs485_hd", "mipi_gpio2",
108                 "mipi_gpio1", "", "", "pci_wdis#",
109                 "", "", "", "", "", "", "", "",
110                 "", "", "", "", "", "", "", "",
111                 "", "", "", "", "", "", "", "";
112 };
113 
114 &i2c2 {
115         clock-frequency = <400000>;
116         pinctrl-names = "default";
117         pinctrl-0 = <&pinctrl_i2c2>;
118         status = "okay";
119 
120         accelerometer@19 {
121                 pinctrl-names = "default";
122                 pinctrl-0 = <&pinctrl_accel>;
123                 compatible = "st,lis2de12";
124                 reg = <0x19>;
125                 st,drdy-int-pin = <1>;
126                 interrupt-parent = <&gpio4>;
127                 interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
128         };
129 };
130 
131 /* off-board header */
132 &i2c3 {
133         clock-frequency = <400000>;
134         pinctrl-names = "default";
135         pinctrl-0 = <&pinctrl_i2c3>;
136         status = "okay";
137 };
138 
139 &pcie_phy {
140         fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
141         fsl,clkreq-unsupported;
142         clocks = <&pcie0_refclk>;
143         clock-names = "ref";
144         status = "okay";
145 };
146 
147 &pcie0 {
148         pinctrl-names = "default";
149         pinctrl-0 = <&pinctrl_pcie0>;
150         reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
151         clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
152                  <&clk IMX8MM_CLK_PCIE1_AUX>;
153         assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
154                           <&clk IMX8MM_CLK_PCIE1_CTRL>;
155         assigned-clock-rates = <10000000>, <250000000>;
156         assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
157                                  <&clk IMX8MM_SYS_PLL2_250M>;
158         status = "okay";
159 
160         pcie@0,0 {
161                 reg = <0x0000 0 0 0 0>;
162                 device_type = "pci";
163                 #address-cells = <3>;
164                 #size-cells = <2>;
165                 ranges;
166 
167                 pcie@0,0 {
168                         reg = <0x0000 0 0 0 0>;
169                         device_type = "pci";
170                         #address-cells = <3>;
171                         #size-cells = <2>;
172                         ranges;
173 
174                         pcie@3,0 {
175                                 reg = <0x1800 0 0 0 0>;
176                                 device_type = "pci";
177                                 #address-cells = <3>;
178                                 #size-cells = <2>;
179                                 ranges;
180 
181                                 eth1: ethernet@0,0 {
182                                         reg = <0x0000 0 0 0 0>;
183                                         #address-cells = <3>;
184                                         #size-cells = <2>;
185                                         ranges;
186 
187                                         local-mac-address = [00 00 00 00 00 00];
188                                 };
189                         };
190                 };
191         };
192 };
193 
194 /* off-board header */
195 &sai3 {
196         pinctrl-names = "default";
197         pinctrl-0 = <&pinctrl_sai3>;
198         assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
199         assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
200         assigned-clock-rates = <24576000>;
201         status = "okay";
202 };
203 
204 /* GPS */
205 &uart1 {
206         pinctrl-names = "default";
207         pinctrl-0 = <&pinctrl_uart1>;
208         status = "okay";
209 };
210 
211 /* off-board header */
212 &uart3 {
213         pinctrl-names = "default";
214         pinctrl-0 = <&pinctrl_uart3>;
215         status = "okay";
216 };
217 
218 /* RS232 */
219 &uart4 {
220         pinctrl-names = "default";
221         pinctrl-0 = <&pinctrl_uart4>;
222         status = "okay";
223 };
224 
225 &usbotg1 {
226         dr_mode = "otg";
227         over-current-active-low;
228         vbus-supply = <&reg_usb_otg1_vbus>;
229         status = "okay";
230 };
231 
232 &usbotg2 {
233         dr_mode = "host";
234         disable-over-current;
235         vbus-supply = <&reg_usb_otg2_vbus>;
236         status = "okay";
237 };
238 
239 /* microSD */
240 &usdhc2 {
241         pinctrl-names = "default", "state_100mhz", "state_200mhz";
242         pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
243         pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
244         pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
245         cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
246         bus-width = <4>;
247         vmmc-supply = <&reg_3p3v>;
248         status = "okay";
249 };
250 
251 &iomuxc {
252         pinctrl-names = "default";
253         pinctrl-0 = <&pinctrl_hog>;
254 
255         pinctrl_hog: hoggrp {
256                 fsl,pins = <
257                         MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3         0x40000041 /* PLUG_TEST */
258                         MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6       0x40000041 /* PCI_USBSEL */
259                         MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7        0x40000041 /* PCIE_WDIS# */
260                         MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7       0x40000041 /* DIO0 */
261                         MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9       0x40000041 /* DIO1 */
262                         MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0       0x40000104 /* RS485_TERM */
263                         MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0        0x40000104 /* RS485 */
264                         MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2        0x40000104 /* RS485_HALF */
265                 >;
266         };
267 
268         pinctrl_accel: accelgrp {
269                 fsl,pins = <
270                         MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5        0x159
271                 >;
272         };
273 
274         pinctrl_gpio_leds: gpioledgrp {
275                 fsl,pins = <
276                         MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5    0x19
277                         MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4         0x19
278                 >;
279         };
280 
281         pinctrl_i2c3: i2c3grp {
282                 fsl,pins = <
283                         MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL          0x400001c3
284                         MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA          0x400001c3
285                 >;
286         };
287 
288         pinctrl_pcie0: pcie0grp {
289                 fsl,pins = <
290                         MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6        0x41
291                 >;
292         };
293 
294         pinctrl_pps: ppsgrp {
295                 fsl,pins = <
296                         MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15      0x41
297                 >;
298         };
299 
300         pinctrl_reg_usb1_en: regusb1grp {
301                 fsl,pins = <
302                         MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12      0x41
303                         MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC     0x41
304                 >;
305         };
306 
307         pinctrl_reg_usb2_en: regusb2grp {
308                 fsl,pins = <
309                         MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8       0x41
310                 >;
311         };
312 
313         pinctrl_sai3: sai3grp {
314                 fsl,pins = <
315                         MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
316                         MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
317                         MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
318                         MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
319                         MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0     0xd6
320                 >;
321         };
322 
323         pinctrl_spi2: spi2grp {
324                 fsl,pins = <
325                         MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK    0xd6
326                         MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI    0xd6
327                         MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO    0xd6
328                         MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13      0xd6
329                         MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10      0xd6
330                 >;
331         };
332 
333         pinctrl_uart1: uart1grp {
334                 fsl,pins = <
335                         MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX     0x140
336                         MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX     0x140
337                 >;
338         };
339 
340         pinctrl_uart3: uart3grp {
341                 fsl,pins = <
342                         MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX     0x140
343                         MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX     0x140
344                 >;
345         };
346 
347         pinctrl_uart4: uart4grp {
348                 fsl,pins = <
349                         MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX     0x140
350                         MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX     0x140
351                 >;
352         };
353 
354         pinctrl_usdhc1: usdhc1grp {
355                 fsl,pins = <
356                         MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK         0x190
357                         MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD         0x1d0
358                         MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0     0x1d0
359                         MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1     0x1d0
360                         MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2     0x1d0
361                         MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3     0x1d0
362                 >;
363         };
364 
365         pinctrl_usdhc2: usdhc2grp {
366                 fsl,pins = <
367                         MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         0x190
368                         MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         0x1d0
369                         MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d0
370                         MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d0
371                         MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d0
372                         MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d0
373                 >;
374         };
375 
376         pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
377                 fsl,pins = <
378                         MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         0x194
379                         MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         0x1d4
380                         MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d4
381                         MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d4
382                         MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d4
383                         MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d4
384                 >;
385         };
386 
387         pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
388                 fsl,pins = <
389                         MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK         0x196
390                         MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD         0x1d6
391                         MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d6
392                         MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d6
393                         MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d6
394                         MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d6
395                 >;
396         };
397 
398         pinctrl_usdhc2_gpio: usdhc2gpiogrp {
399                 fsl,pins = <
400                         MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12        0x1c4
401                         MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0x1d0
402                         MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
403                 >;
404         };
405 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php