~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts

Version: ~ [ linux-6.11.5 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.58 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.114 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.169 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.228 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.284 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.322 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.9 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  2 /*
  3  * Copyright (C) 2022 Marek Vasut <marex@denx.de>
  4  */
  5 
  6 /dts-v1/;
  7 
  8 #include <dt-bindings/net/qca-ar803x.h>
  9 #include <dt-bindings/phy/phy-imx8-pcie.h>
 10 #include "imx8mp.dtsi"
 11 
 12 / {
 13         model = "Data Modul i.MX8M Plus eDM SBC";
 14         compatible = "dmo,imx8mp-data-modul-edm-sbc", "fsl,imx8mp";
 15 
 16         aliases {
 17                 rtc0 = &rtc;
 18                 rtc1 = &snvs_rtc;
 19         };
 20 
 21         chosen {
 22                 stdout-path = &uart3;
 23         };
 24 
 25         memory@40000000 {
 26                 device_type = "memory";
 27                 /* There are 1/2/4 GiB options, adjusted by bootloader. */
 28                 reg = <0x0 0x40000000 0 0x40000000>;
 29         };
 30 
 31         backlight: backlight {
 32                 compatible = "pwm-backlight";
 33                 pinctrl-names = "default";
 34                 pinctrl-0 = <&pinctrl_panel_backlight>;
 35                 brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>;
 36                 default-brightness-level = <7>;
 37                 enable-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
 38                 pwms = <&pwm1 0 5000000 0>;
 39                 /* Disabled by default, unless display board plugged in. */
 40                 status = "disabled";
 41         };
 42 
 43         clk_xtal25: clock-xtal25 {
 44                 compatible = "fixed-clock";
 45                 #clock-cells = <0>;
 46                 clock-frequency = <25000000>;
 47         };
 48 
 49         clk_pwm4: clock-pwm4 {
 50                 compatible = "pwm-clock";
 51                 #clock-cells = <0>;
 52                 clock-frequency = <12000000>;
 53                 clock-output-names = "codec-pwm4";
 54                 /*
 55                  * 1 / 83 ns ~= 12 MHz , but since the PWM input clock is 24 MHz
 56                  * and the calculated PWM period is 1 and duty cycle is 50%, the
 57                  * result is exactly 12 MHz, which is fine for SGTL5000 MCLK.
 58                  */
 59                 pwms = <&pwm4 0 83 0>;
 60         };
 61 
 62         panel: panel {
 63                 /* Compatible string is filled in by panel board DT Overlay. */
 64                 backlight = <&backlight>;
 65                 power-supply = <&reg_panel_vcc>;
 66                 /* Disabled by default, unless display board plugged in. */
 67                 status = "disabled";
 68         };
 69 
 70         reg_panel_vcc: regulator-panel-vcc {
 71                 compatible = "regulator-fixed";
 72                 pinctrl-names = "default";
 73                 pinctrl-0 = <&pinctrl_panel_vcc_reg>;
 74                 regulator-min-microvolt = <5000000>;
 75                 regulator-max-microvolt = <5000000>;
 76                 regulator-name = "PANEL_VCC";
 77                 /* GPIO flags are ignored, enable-active-high applies. */
 78                 gpio = <&gpio3 6 GPIO_ACTIVE_HIGH>;
 79                 enable-active-high;
 80                 /* Disabled by default, unless display board plugged in. */
 81                 status = "disabled";
 82         };
 83 
 84         reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
 85                 compatible = "regulator-fixed";
 86                 pinctrl-names = "default";
 87                 pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
 88                 regulator-max-microvolt = <3300000>;
 89                 regulator-min-microvolt = <3300000>;
 90                 regulator-name = "VDD_3V3_SD";
 91                 /* GPIO flags are ignored, enable-active-high applies. */
 92                 gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; /* SD2_RESET */
 93                 enable-active-high;
 94                 off-on-delay-us = <12000>;
 95                 startup-delay-us = <100>;
 96                 vin-supply = <&buck4>;
 97         };
 98 
 99         sound {
100                 compatible = "simple-audio-card";
101                 simple-audio-card,name = "SGTL5000-Card";
102                 simple-audio-card,format = "i2s";
103                 simple-audio-card,bitclock-master = <&codec_dai>;
104                 simple-audio-card,frame-master = <&codec_dai>;
105                 simple-audio-card,widgets = "Headphone", "Headphone Jack";
106                 simple-audio-card,routing = "Headphone Jack", "HP_OUT";
107 
108                 cpu_dai: simple-audio-card,cpu {
109                         sound-dai = <&sai3>;
110                 };
111 
112                 codec_dai: simple-audio-card,codec {
113                         sound-dai = <&sgtl5000>;
114                 };
115         };
116 
117         watchdog { /* TPS3813 */
118                 compatible = "linux,wdt-gpio";
119                 pinctrl-names = "default";
120                 pinctrl-0 = <&pinctrl_watchdog_gpio>;
121                 always-running;
122                 gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
123                 hw_algo = "level";
124                 /* Reset triggers in 2..3 seconds */
125                 hw_margin_ms = <1500>;
126                 /* Disabled by default */
127                 status = "disabled";
128         };
129 };
130 
131 &A53_0 {
132         cpu-supply = <&buck2>;
133 };
134 
135 &A53_1 {
136         cpu-supply = <&buck2>;
137 };
138 
139 &A53_2 {
140         cpu-supply = <&buck2>;
141 };
142 
143 &A53_3 {
144         cpu-supply = <&buck2>;
145 };
146 
147 &ecspi1 {
148         pinctrl-names = "default";
149         pinctrl-0 = <&pinctrl_ecspi1>;
150         cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
151         status = "okay";
152 
153         flash@0 {       /* W25Q128JVEI */
154                 compatible = "jedec,spi-nor";
155                 reg = <0>;
156                 spi-max-frequency = <40000000>;
157                 spi-tx-bus-width = <1>;
158                 spi-rx-bus-width = <1>;
159         };
160 };
161 
162 &ecspi2 {       /* Feature connector SPI */
163         pinctrl-names = "default";
164         pinctrl-0 = <&pinctrl_ecspi2>;
165         cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
166         /* Disabled by default, unless feature board plugged in. */
167         status = "disabled";
168 };
169 
170 &ecspi3 {       /* Display connector SPI */
171         pinctrl-names = "default";
172         pinctrl-0 = <&pinctrl_ecspi3>;
173         cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
174         /* Disabled by default, unless display board plugged in. */
175         status = "disabled";
176 };
177 
178 &eqos { /* First ethernet */
179         pinctrl-names = "default";
180         pinctrl-0 = <&pinctrl_eqos>;
181         phy-handle = <&phy_eqos>;
182         phy-mode = "rgmii-id";
183         status = "okay";
184 
185         mdio {
186                 compatible = "snps,dwmac-mdio";
187                 #address-cells = <1>;
188                 #size-cells = <0>;
189 
190                 /* Atheros AR8031 PHY */
191                 phy_eqos: ethernet-phy@0 {
192                         compatible = "ethernet-phy-ieee802.3-c22";
193                         reg = <0>;
194                         /*
195                          * Dedicated ENET_WOL# signal is unused, the PHY
196                          * can wake the SoC up via INT signal as well.
197                          */
198                         interrupts-extended = <&gpio1 11 IRQ_TYPE_LEVEL_LOW>;
199                         reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
200                         reset-assert-us = <10000>;
201                         reset-deassert-us = <10000>;
202                         qca,keep-pll-enabled;
203                         vddio-supply = <&vddio_eqos>;
204 
205                         vddio_eqos: vddio-regulator {
206                                 regulator-name = "VDDIO_EQOS";
207                                 regulator-min-microvolt = <1800000>;
208                                 regulator-max-microvolt = <1800000>;
209                         };
210 
211                         vddh_eqos: vddh-regulator {
212                                 regulator-name = "VDDH_EQOS";
213                         };
214                 };
215         };
216 };
217 
218 &fec {  /* Second ethernet */
219         pinctrl-names = "default";
220         pinctrl-0 = <&pinctrl_fec>;
221         phy-handle = <&phy_fec>;
222         phy-mode = "rgmii-id";
223         fsl,magic-packet;
224         status = "okay";
225 
226         mdio {
227                 #address-cells = <1>;
228                 #size-cells = <0>;
229 
230                 /* Atheros AR8031 PHY */
231                 phy_fec: ethernet-phy@0 {
232                         compatible = "ethernet-phy-ieee802.3-c22";
233                         reg = <0>;
234                         /*
235                          * Dedicated ENET_WOL# signal is unused, the PHY
236                          * can wake the SoC up via INT signal as well.
237                          */
238                         interrupts-extended = <&gpio2 2 IRQ_TYPE_LEVEL_LOW>;
239                         reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
240                         reset-assert-us = <10000>;
241                         reset-deassert-us = <10000>;
242                         qca,keep-pll-enabled;
243                         vddio-supply = <&vddio_fec>;
244 
245                         vddio_fec: vddio-regulator {
246                                 regulator-name = "VDDIO_FEC";
247                                 regulator-min-microvolt = <1800000>;
248                                 regulator-max-microvolt = <1800000>;
249                         };
250 
251                         vddh_fec: vddh-regulator {
252                                 regulator-name = "VDDH_FEC";
253                         };
254                 };
255         };
256 };
257 
258 &flexcan1 {
259         pinctrl-names = "default";
260         pinctrl-0 = <&pinctrl_flexcan1>;
261         status = "okay";
262 };
263 
264 &gpio1 {
265         gpio-line-names =
266                 "", "USBHUB_RESET#", "WDOG_B#", "PMIC_INT#",
267                 "", "M2_PCIE_RST#", "M2_PCIE_WAKE#", "GPIO5_IO03",
268                 "GPIO5_IO04", "PDM_SEL", "ENET_WOL#", "ENET_INT#",
269                 "", "", "", "ENET_RST#",
270                 "", "", "", "", "", "", "", "",
271                 "", "", "", "", "", "", "", "";
272 };
273 
274 &gpio2 {
275         gpio-line-names =
276                 "", "", "ENET2_INT#", "", "", "", "", "",
277                 "WDOG_KICK#", "ENET2_RST#", "CAN_INT#", "RTC_IRQ#",
278                 "", "", "", "",
279                 "", "", "", "SD2_RESET#", "", "", "", "",
280                 "", "", "", "", "", "", "", "";
281 };
282 
283 &gpio3 {
284         gpio-line-names =
285                 "BL_ENABLE_1V8", "PG_V_IN_VAR#", "", "",
286                 "", "", "TFT_ENABLE_1V8", "GRAPHICS_GPIO0_1V8",
287                 "CSI2_PD_1V8", "CSI2_RESET_1V8#", "", "",
288                 "", "", "EEPROM_WP_1V8#", "", "", "", "", "",
289                 "MEMCFG0", "PCIE_CLK_GEN_CLKPWRGD_PD_1V8#",
290                 "", "M2_W_DISABLE1_1V8#",
291                 "M2_W_DISABLE2_1V8#", "", "I2C5_SCL_3V3", "I2C5_SDA_3V3",
292                 "", "", "", "";
293 };
294 
295 &gpio4 {
296         gpio-line-names =
297                 "DSI_RESET_1V8#", "MEMCFG2", "", "MEMCFG1", "", "", "", "",
298                 "", "", "", "", "", "", "", "",
299                 "", "", "GRAPHICS_PRSNT_1V8#", "DSI_IRQ_1V8#",
300                 "", "DIS_USB_DN1", "DIS_USB_DN2", "",
301                 "", "", "", "", "", "", "", "";
302 };
303 
304 &gpio5 {
305         gpio-line-names =
306                 "", "", "", "", "", "WDOG_EN", "", "",
307                 "", "SPI1_CS#", "", "",
308                 "", "SPI2_CS#", "I2C1_SCL_3V3", "I2C1_SDA_3V3",
309                 "I2C2_SCL_3V3", "I2C2_SDA_3V3", "I2C3_SCL_3V3", "I2C3_SDA_3V3",
310                 "", "", "", "",
311                 "", "SPI3_CS#", "", "", "", "", "", "";
312 };
313 
314 &i2c1 {
315         clock-frequency = <100000>;
316         pinctrl-names = "default", "gpio";
317         pinctrl-0 = <&pinctrl_i2c1>;
318         pinctrl-1 = <&pinctrl_i2c1_gpio>;
319         scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
320         sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
321         status = "okay";
322 
323         sgtl5000: audio-codec@a {
324                 compatible = "fsl,sgtl5000";
325                 reg = <0x0a>;
326                 #sound-dai-cells = <0>;
327                 clocks = <&clk_pwm4>;
328                 VDDA-supply = <&buck4>;
329                 VDDIO-supply = <&buck4>;
330         };
331 
332         usb-hub@2c {
333                 compatible = "microchip,usb2514bi";
334                 reg = <0x2c>;
335                 pinctrl-names = "default";
336                 pinctrl-0 = <&pinctrl_usb_hub>;
337                 individual-port-switching;
338                 reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
339                 self-powered;
340         };
341 
342         eeprom: eeprom@50 {
343                 compatible = "atmel,24c32";
344                 reg = <0x50>;
345                 pagesize = <32>;
346         };
347 
348         rtc: rtc@68 {
349                 compatible = "st,m41t62";
350                 reg = <0x68>;
351                 pinctrl-names = "default";
352                 pinctrl-0 = <&pinctrl_rtc>;
353                 interrupts-extended = <&gpio2 11 IRQ_TYPE_LEVEL_LOW>;
354         };
355 
356         pcieclk: clk@6a {
357                 compatible = "renesas,9fgv0241";
358                 reg = <0x6a>;
359                 clocks = <&clk_xtal25>;
360                 #clock-cells = <1>;
361         };
362 };
363 
364 &i2c2 {
365         clock-frequency = <100000>;
366         pinctrl-names = "default", "gpio";
367         pinctrl-0 = <&pinctrl_i2c2>;
368         pinctrl-1 = <&pinctrl_i2c2_gpio>;
369         scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
370         sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
371         status = "okay";
372 };
373 
374 &i2c3 {
375         clock-frequency = <100000>;
376         pinctrl-names = "default", "gpio";
377         pinctrl-0 = <&pinctrl_i2c3>;
378         pinctrl-1 = <&pinctrl_i2c3_gpio>;
379         scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
380         sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
381         status = "okay";
382 
383         pmic: pmic@25 {
384                 compatible = "nxp,pca9450c";
385                 reg = <0x25>;
386                 pinctrl-names = "default";
387                 pinctrl-0 = <&pinctrl_pmic>;
388                 interrupt-parent = <&gpio1>;
389                 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
390 
391                 /*
392                  * i.MX 8M Plus Data Sheet for Consumer Products
393                  * 3.1.4 Operating ranges
394                  * MIMX8ML8CVNKZAB
395                  */
396                 regulators {
397                         buck1: BUCK1 {  /* VDD_SOC (dual-phase with BUCK3) */
398                                 regulator-min-microvolt = <850000>;
399                                 regulator-max-microvolt = <1000000>;
400                                 regulator-ramp-delay = <3125>;
401                                 regulator-always-on;
402                                 regulator-boot-on;
403                         };
404 
405                         buck2: BUCK2 {  /* VDD_ARM */
406                                 nxp,dvs-run-voltage = <950000>;
407                                 nxp,dvs-standby-voltage = <850000>;
408                                 regulator-min-microvolt = <850000>;
409                                 regulator-max-microvolt = <1000000>;
410                                 regulator-ramp-delay = <3125>;
411                                 regulator-always-on;
412                                 regulator-boot-on;
413                         };
414 
415                         buck4: BUCK4 {  /* VDD_3V3 */
416                                 regulator-min-microvolt = <3300000>;
417                                 regulator-max-microvolt = <3300000>;
418                                 regulator-always-on;
419                                 regulator-boot-on;
420                         };
421 
422                         buck5: BUCK5 {  /* VDD_1V8 */
423                                 regulator-min-microvolt = <1800000>;
424                                 regulator-max-microvolt = <1800000>;
425                                 regulator-always-on;
426                                 regulator-boot-on;
427                         };
428 
429                         buck6: BUCK6 {  /* NVCC_DRAM_1V1 */
430                                 regulator-min-microvolt = <1100000>;
431                                 regulator-max-microvolt = <1100000>;
432                                 regulator-always-on;
433                                 regulator-boot-on;
434                         };
435 
436                         ldo1: LDO1 {    /* NVCC_SNVS_1V8 */
437                                 regulator-min-microvolt = <1800000>;
438                                 regulator-max-microvolt = <1800000>;
439                                 regulator-always-on;
440                                 regulator-boot-on;
441                         };
442 
443                         ldo3: LDO3 {    /* VDDA_1V8 */
444                                 regulator-min-microvolt = <1800000>;
445                                 regulator-max-microvolt = <1800000>;
446                                 regulator-always-on;
447                                 regulator-boot-on;
448                         };
449 
450                         ldo4: LDO4 {    /* PMIC_LDO4 */
451                                 regulator-min-microvolt = <3300000>;
452                                 regulator-max-microvolt = <3300000>;
453                         };
454 
455                         ldo5: LDO5 {    /* NVCC_SD2 */
456                                 regulator-min-microvolt = <1800000>;
457                                 regulator-max-microvolt = <3300000>;
458                         };
459                 };
460         };
461 };
462 
463 &i2c5 { /* HDMI EDID bus */
464         clock-frequency = <100000>;
465         pinctrl-names = "default", "gpio";
466         pinctrl-0 = <&pinctrl_i2c5>;
467         pinctrl-1 = <&pinctrl_i2c5_gpio>;
468         scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
469         sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
470         status = "okay";
471 };
472 
473 &pcie_phy {
474         clocks = <&pcieclk 0>;
475         clock-names = "ref";
476         fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
477         status = "okay";
478 };
479 
480 &pcie {
481         pinctrl-names = "default";
482         pinctrl-0 = <&pinctrl_pcie0>;
483         fsl,max-link-speed = <3>;
484         reset-gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
485         status = "okay";
486 };
487 
488 &pwm1 {
489         pinctrl-names = "default";
490         pinctrl-0 = <&pinctrl_panel_pwm>;
491         /* Disabled by default, unless display board plugged in. */
492         status = "disabled";
493 };
494 
495 &pwm4 {
496         pinctrl-names = "default";
497         pinctrl-0 = <&pinctrl_pwm4>;
498         status = "okay";
499 };
500 
501 &sai3 {
502         #clock-cells = <0>;
503         #sound-dai-cells = <0>;
504         assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
505         assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
506         assigned-clock-rates = <12288000>;
507         pinctrl-names = "default";
508         pinctrl-0 = <&pinctrl_sai3>;
509         status = "okay";
510 };
511 
512 /* SD slot */
513 &usdhc2 {
514         pinctrl-names = "default", "state_100mhz", "state_200mhz";
515         pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
516         pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
517         pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
518         cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
519         vmmc-supply = <&reg_usdhc2_vmmc>;
520         bus-width = <4>;
521         status = "okay";
522 };
523 
524 /* eMMC */
525 &usdhc3 {
526         pinctrl-names = "default", "state_100mhz", "state_200mhz";
527         pinctrl-0 = <&pinctrl_usdhc3>;
528         pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
529         pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
530         vmmc-supply = <&buck4>;
531         vqmmc-supply = <&buck5>;
532         bus-width = <8>;
533         no-sd;
534         no-sdio;
535         non-removable;
536         status = "okay";
537 };
538 
539 &uart1 {        /* RS485 */
540         pinctrl-names = "default";
541         pinctrl-0 = <&pinctrl_uart1>;
542         uart-has-rtscts;
543         status = "disabled";    /* Optional */
544 };
545 
546 &uart2 {
547         pinctrl-names = "default";
548         pinctrl-0 = <&pinctrl_uart2>;
549         uart-has-rtscts;
550         status = "okay";
551 };
552 
553 &uart3 {        /* A53 Debug */
554         pinctrl-names = "default";
555         pinctrl-0 = <&pinctrl_uart3>;
556         status = "okay";
557 };
558 
559 &uart4 {
560         pinctrl-names = "default";
561         pinctrl-0 = <&pinctrl_uart4>;
562         status = "disabled";
563 };
564 
565 &usb3_phy0 {
566         status = "okay";
567 };
568 
569 &usb3_0 {
570         fsl,over-current-active-low;
571         status = "okay";
572 };
573 
574 &usb_dwc3_0 {   /* Lower plug direct */
575         pinctrl-names = "default";
576         pinctrl-0 = <&pinctrl_usb1>;
577         dr_mode = "host";
578         status = "okay";
579 };
580 
581 &usb3_phy1 {
582         status = "okay";
583 };
584 
585 &usb3_1 {
586         status = "okay";
587 };
588 
589 &usb_dwc3_1 {   /* Upper plug via HUB */
590         dr_mode = "host";
591         status = "okay";
592 };
593 
594 &wdog1 {
595         status = "okay";
596 };
597 
598 /* IOMUXC node should be at the end of DT to improve readability. */
599 &iomuxc {
600         pinctrl-names = "default";
601         pinctrl-0 = <&pinctrl_hog_feature>, <&pinctrl_hog_misc>,
602                     <&pinctrl_hog_panel>, <&pinctrl_hog_sbc>,
603                     <&pinctrl_panel_expansion>;
604 
605         pinctrl_ecspi1: ecspi1-grp {
606                 fsl,pins = <
607                         MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK           0x44
608                         MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI           0x44
609                         MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO           0x44
610                         MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09             0x40
611                 >;
612         };
613 
614         pinctrl_ecspi2: ecspi2-grp {
615                 fsl,pins = <
616                         MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK           0x44
617                         MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI           0x44
618                         MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO           0x44
619                         MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13             0x40
620                 >;
621         };
622 
623         pinctrl_ecspi3: ecspi3-grp {
624                 fsl,pins = <
625                         MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK             0x44
626                         MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI             0x44
627                         MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO             0x44
628                         MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25              0x40
629                 >;
630         };
631 
632         pinctrl_eqos: eqos-grp {
633                 fsl,pins = <
634                         MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC             0x3
635                         MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO           0x3
636                         MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
637                         MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK       0x1f
638                         MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0       0x1f
639                         MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1       0x1f
640                         MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2       0x1f
641                         MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3       0x1f
642                         MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK       0x91
643                         MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
644                         MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0       0x91
645                         MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1       0x91
646                         MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2       0x91
647                         MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3       0x91
648                         /* ENET_RST# */
649                         MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15             0x6
650                         /* ENET_INT# */
651                         MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11             0x40000090
652                 >;
653         };
654 
655         pinctrl_fec: fec-grp {
656                 fsl,pins = <
657                         MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC               0x3
658                         MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO              0x3
659                         MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0         0x91
660                         MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1         0x91
661                         MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2         0x91
662                         MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3         0x91
663                         MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC          0x91
664                         MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL      0x91
665                         MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0         0x1f
666                         MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1         0x1f
667                         MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2         0x1f
668                         MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3         0x1f
669                         MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL      0x1f
670                         MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC         0x1f
671                         /* ENET2_RST# */
672                         MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09              0x6
673                         /* ENET2_INT# */
674                         MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02              0x40000090
675                 >;
676         };
677 
678         pinctrl_flexcan1: flexcan1-grp {
679                 fsl,pins = <
680                         MX8MP_IOMUXC_SPDIF_RX__CAN1_RX                  0x154
681                         MX8MP_IOMUXC_SPDIF_TX__CAN1_TX                  0x154
682                 >;
683         };
684 
685         pinctrl_hog_feature: hog-feature-grp {
686                 fsl,pins = <
687                         /* GPIO5_IO03 */
688                         MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07             0x40000006
689                         /* GPIO5_IO04 */
690                         MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08             0x40000006
691 
692                         /* CAN_INT# */
693                         MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10            0x40000090
694                 >;
695         };
696 
697         pinctrl_hog_panel: hog-panel-grp {
698                 fsl,pins = <
699                         /* GRAPHICS_GPIO0_1V8 */
700                         MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07            0x26
701                 >;
702         };
703 
704         pinctrl_hog_misc: hog-misc-grp {
705                 fsl,pins = <
706                         /* ENET_WOL# -- shared by both PHYs */
707                         MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10             0x40000090
708 
709                         /* PG_V_IN_VAR# */
710                         MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01             0x40000000
711                         /* CSI2_PD_1V8 */
712                         MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08            0x0
713                         /* CSI2_RESET_1V8# */
714                         MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09            0x0
715 
716                         /* DIS_USB_DN1 */
717                         MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21              0x0
718                         /* DIS_USB_DN2 */
719                         MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22               0x0
720 
721                         /* EEPROM_WP_1V8# */
722                         MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14               0x100
723                         /* PCIE_CLK_GEN_CLKPWRGD_PD_1V8# */
724                         MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21              0x0
725                         /* GRAPHICS_PRSNT_1V8# */
726                         MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18              0x40000000
727 
728                         /* CLK_CCM_CLKO1_3V3 */
729                         MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1              0x10
730                 >;
731         };
732 
733         pinctrl_hog_sbc: hog-sbc-grp {
734                 fsl,pins = <
735                         /* MEMCFG[0..2] straps */
736                         MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20               0x40000140
737                         MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03              0x40000140
738                         MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01               0x40000140
739                 >;
740         };
741 
742         pinctrl_i2c1: i2c1-grp {
743                 fsl,pins = <
744                         MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL                 0x40000084
745                         MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA                 0x40000084
746                 >;
747         };
748 
749         pinctrl_i2c1_gpio: i2c1-gpio-grp {
750                 fsl,pins = <
751                         MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14               0x84
752                         MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15               0x84
753                 >;
754         };
755 
756         pinctrl_i2c2: i2c2-grp {
757                 fsl,pins = <
758                         MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL                 0x40000084
759                         MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA                 0x40000084
760                 >;
761         };
762 
763         pinctrl_i2c2_gpio: i2c2-gpio-grp {
764                 fsl,pins = <
765                         MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16               0x84
766                         MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17               0x84
767                 >;
768         };
769 
770         pinctrl_i2c3: i2c3-grp {
771                 fsl,pins = <
772                         MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL                 0x40000084
773                         MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA                 0x40000084
774                 >;
775         };
776 
777         pinctrl_i2c3_gpio: i2c3-gpio-grp {
778                 fsl,pins = <
779                         MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18               0x84
780                         MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19               0x84
781                 >;
782         };
783 
784         pinctrl_i2c5: i2c5-grp {
785                 fsl,pins = <
786                         MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL             0x40000084
787                         MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA             0x40000084
788                 >;
789         };
790 
791         pinctrl_i2c5_gpio: i2c5-gpio-grp {
792                 fsl,pins = <
793                         MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26           0x84
794                         MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27           0x84
795                 >;
796         };
797 
798         pinctrl_panel_backlight: panel-backlight-grp {
799                 fsl,pins = <
800                         /* BL_ENABLE_1V8 */
801                         MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00               0x104
802                 >;
803         };
804 
805         pinctrl_panel_expansion: panel-expansion-grp {
806                 fsl,pins = <
807                         /* DSI_RESET_1V8# */
808                         MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00              0x2
809                         /* DSI_IRQ_1V8# */
810                         MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19              0x40000090
811                 >;
812         };
813 
814         pinctrl_panel_pwm: panel-pwm-grp {
815                 fsl,pins = <
816                         /* BL_PWM_3V3 */
817                         MX8MP_IOMUXC_I2C4_SDA__PWM1_OUT                 0x12
818                 >;
819         };
820 
821         pinctrl_panel_vcc_reg: panel-vcc-grp {
822                 fsl,pins = <
823                         /* TFT_ENABLE_1V8 */
824                         MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06            0x104
825                 >;
826         };
827 
828         pinctrl_pcie0: pcie-grp {
829                 fsl,pins = <
830                         /* M2_PCIE_RST# */
831                         MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05             0x2
832                         /* M2_W_DISABLE1_1V8# */
833                         MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23              0x2
834                         /* M2_W_DISABLE2_1V8# */
835                         MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24              0x2
836                         /* CLK_M2_32K768 */
837                         MX8MP_IOMUXC_GPIO1_IO00__CCM_EXT_CLK1           0x14
838                         /* M2_PCIE_WAKE# */
839                         MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06             0x40000140
840                         /* M2_PCIE_CLKREQ# */
841                         MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B            0x61
842                 >;
843         };
844 
845         pinctrl_pdm: pdm-grp {
846                 fsl,pins = <
847                         /* PDM_SEL */
848                         MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09             0x0
849                         MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_PDM_CLK         0x0
850                         MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_PDM_BIT_STREAM00       0x0
851                 >;
852         };
853 
854         pinctrl_pmic: pmic-grp {
855                 fsl,pins = <
856                         /* PMIC_nINT */
857                         MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03             0x40000090
858                 >;
859         };
860 
861         pinctrl_pwm4: pwm4-grp {
862                 fsl,pins = <
863                         MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT                0xd6
864                 >;
865         };
866 
867         pinctrl_rtc: rtc-grp {
868                 fsl,pins = <
869                         /* RTC_IRQ# */
870                         MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11             0x40000090
871                 >;
872         };
873 
874         pinctrl_sai1: sai1-grp {
875                 fsl,pins = <
876                         MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC   0xd6
877                         MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00 0xd6
878                         MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK   0xd6
879                         MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK      0xd6
880                         MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00 0xd6
881                 >;
882         };
883 
884         pinctrl_sai2: sai2-grp {
885                 fsl,pins = <
886                         MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC   0xd6
887                         MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6
888                         MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK    0xd6
889                         MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK      0xd6
890                 >;
891         };
892 
893         pinctrl_sai3: sai3-grp {
894                 fsl,pins = <
895                         MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC   0xd6
896                         MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00  0xd6
897                         MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK    0xd6
898                         MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00  0xd6
899                 >;
900         };
901 
902         pinctrl_uart1: uart1-grp {
903                 fsl,pins = <
904                         MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX              0x49
905                         MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX              0x49
906                         MX8MP_IOMUXC_SD1_DATA1__UART1_DCE_CTS           0x49
907                         MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS           0x49
908                 >;
909         };
910 
911         pinctrl_uart2: uart2-grp {
912                 fsl,pins = <
913                         MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX            0x49
914                         MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX            0x49
915                         MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS           0x49
916                         MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS           0x49
917                 >;
918         };
919 
920         pinctrl_uart3: uart3-grp {
921                 fsl,pins = <
922                         MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX            0x49
923                         MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX            0x49
924                 >;
925         };
926 
927         pinctrl_uart4: uart4-grp {
928                 fsl,pins = <
929                         MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX            0x49
930                         MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX            0x49
931                 >;
932         };
933 
934         pinctrl_usdhc2: usdhc2-grp {
935                 fsl,pins = <
936                         MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK                0x190
937                         MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD                0x1d0
938                         MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0            0x1d0
939                         MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1            0x1d0
940                         MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2            0x1d0
941                         MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3            0x1d0
942                         MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT         0xc1
943                 >;
944         };
945 
946         pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
947                 fsl,pins = <
948                         MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK                0x194
949                         MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD                0x1d4
950                         MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0            0x1d4
951                         MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1            0x1d4
952                         MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2            0x1d4
953                         MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3            0x1d4
954                         MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT         0xc1
955                 >;
956         };
957 
958         pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
959                 fsl,pins = <
960                         MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK                0x196
961                         MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD                0x1d6
962                         MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0            0x1d6
963                         MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1            0x1d6
964                         MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2            0x1d6
965                         MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3            0x1d6
966                         MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT         0xc1
967                 >;
968         };
969 
970         pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp {
971                 fsl,pins = <
972                         MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19            0x20
973                 >;
974         };
975 
976         pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
977                 fsl,pins = <
978                         MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12               0x40000080
979                 >;
980         };
981 
982         pinctrl_usdhc3: usdhc3-grp {
983                 fsl,pins = <
984                         MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK              0x190
985                         MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD              0x1d0
986                         MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0          0x1d0
987                         MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1          0x1d0
988                         MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2          0x1d0
989                         MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3          0x1d0
990                         MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4            0x1d0
991                         MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5           0x1d0
992                         MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6           0x1d0
993                         MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7             0x1d0
994                         MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE          0x190
995                         MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B       0x141
996                 >;
997         };
998 
999         pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
1000                 fsl,pins = <
1001                         MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK              0x194
1002                         MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD              0x1d4
1003                         MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0          0x1d4
1004                         MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1          0x1d4
1005                         MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2          0x1d4
1006                         MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3          0x1d4
1007                         MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4            0x1d4
1008                         MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5           0x1d4
1009                         MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6           0x1d4
1010                         MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7             0x1d4
1011                         MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE          0x194
1012                         MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B       0x141
1013                 >;
1014         };
1015 
1016         pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
1017                 fsl,pins = <
1018                         MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK              0x196
1019                         MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD              0x1d6
1020                         MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0          0x1d6
1021                         MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1          0x1d6
1022                         MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2          0x1d6
1023                         MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3          0x1d6
1024                         MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4            0x1d6
1025                         MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5           0x1d6
1026                         MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6           0x1d6
1027                         MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7             0x1d6
1028                         MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE          0x196
1029                         MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B       0x141
1030                 >;
1031         };
1032 
1033         pinctrl_usb_hub: usb-hub-grp {
1034                 fsl,pins = <
1035                         /* USBHUB_RESET# */
1036                         MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01             0x4
1037                 >;
1038         };
1039 
1040         pinctrl_usb1: usb1-grp {
1041                 fsl,pins = <
1042                         MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR           0x6
1043                         MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC            0x80
1044                 >;
1045         };
1046 
1047         pinctrl_watchdog_gpio: watchdog-gpio-grp {
1048                 fsl,pins = <
1049                         /* WDOG_B# */
1050                         MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B           0x26
1051                         /* WDOG_EN -- ungate WDT RESET# signal propagation */
1052                         MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05          0x6
1053                         /* WDOG_KICK# / WDI */
1054                         MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08              0x26
1055                 >;
1056         };
1057 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php