~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/arch/arm64/boot/dts/mediatek/mt8195-demo.dts

Version: ~ [ linux-6.12-rc7 ] ~ [ linux-6.11.7 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.60 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.116 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.171 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.229 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.285 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.323 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.9 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
  2 /*
  3  * Copyright (C) 2022 BayLibre, SAS.
  4  * Author: Fabien Parent <fparent@baylibre.com>
  5  */
  6 /dts-v1/;
  7 
  8 #include "mt8195.dtsi"
  9 #include "mt6359.dtsi"
 10 
 11 #include <dt-bindings/gpio/gpio.h>
 12 #include <dt-bindings/input/input.h>
 13 #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
 14 #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
 15 
 16 / {
 17         model = "MediaTek MT8195 demo board";
 18         compatible = "mediatek,mt8195-demo", "mediatek,mt8195";
 19 
 20         aliases {
 21                 serial0 = &uart0;
 22         };
 23 
 24         chosen {
 25                 stdout-path = "serial0:921600n8";
 26         };
 27 
 28         firmware {
 29                 optee {
 30                         compatible = "linaro,optee-tz";
 31                         method = "smc";
 32                 };
 33         };
 34 
 35         gpio-keys {
 36                 compatible = "gpio-keys";
 37                 pinctrl-names = "default";
 38                 pinctrl-0 = <&gpio_keys_pins>;
 39 
 40                 key-0 {
 41                         gpios = <&pio 106 GPIO_ACTIVE_LOW>;
 42                         label = "volume_up";
 43                         linux,code = <KEY_VOLUMEUP>;
 44                         wakeup-source;
 45                         debounce-interval = <15>;
 46                 };
 47         };
 48 
 49         memory@40000000 {
 50                 device_type = "memory";
 51                 reg = <0 0x40000000 0x2 0x00000000>;
 52         };
 53 
 54         reserved-memory {
 55                 #address-cells = <2>;
 56                 #size-cells = <2>;
 57                 ranges;
 58 
 59                 /*
 60                  * 12 MiB reserved for OP-TEE (BL32)
 61                  * +-----------------------+ 0x43e0_0000
 62                  * |      SHMEM 2MiB       |
 63                  * +-----------------------+ 0x43c0_0000
 64                  * |        | TA_RAM  8MiB |
 65                  * + TZDRAM +--------------+ 0x4340_0000
 66                  * |        | TEE_RAM 2MiB |
 67                  * +-----------------------+ 0x4320_0000
 68                  */
 69                 optee_reserved: optee@43200000 {
 70                         no-map;
 71                         reg = <0 0x43200000 0 0x00c00000>;
 72                 };
 73 
 74                 scp_mem: memory@50000000 {
 75                         compatible = "shared-dma-pool";
 76                         reg = <0 0x50000000 0 0x2900000>;
 77                         no-map;
 78                 };
 79 
 80                 vpu_mem: memory@53000000 {
 81                         compatible = "shared-dma-pool";
 82                         reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
 83                 };
 84 
 85                 /* 2 MiB reserved for ARM Trusted Firmware (BL31) */
 86                 bl31_secmon_mem: memory@54600000 {
 87                         no-map;
 88                         reg = <0 0x54600000 0x0 0x200000>;
 89                 };
 90 
 91                 snd_dma_mem: memory@60000000 {
 92                         compatible = "shared-dma-pool";
 93                         reg = <0 0x60000000 0 0x1100000>;
 94                         no-map;
 95                 };
 96 
 97                 apu_mem: memory@62000000 {
 98                         compatible = "shared-dma-pool";
 99                         reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
100                 };
101         };
102 };
103 
104 &eth {
105         phy-mode = "rgmii-id";
106         phy-handle = <&ethernet_phy0>;
107         snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
108         snps,reset-delays-us = <0 10000 80000>;
109         pinctrl-names = "default", "sleep";
110         pinctrl-0 = <&eth_default_pins>;
111         pinctrl-1 = <&eth_sleep_pins>;
112         status = "okay";
113 
114         mdio {
115                 ethernet_phy0: ethernet-phy@1 {
116                         reg = <0x1>;
117                 };
118         };
119 };
120 
121 &i2c6 {
122         clock-frequency = <400000>;
123         pinctrl-0 = <&i2c6_pins>;
124         pinctrl-names = "default";
125         status = "okay";
126 
127         mt6360: pmic@34 {
128                 compatible = "mediatek,mt6360";
129                 reg = <0x34>;
130                 interrupt-controller;
131                 #interrupt-cells = <1>;
132                 interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
133                 interrupt-names = "IRQB";
134 
135                 charger {
136                         compatible = "mediatek,mt6360-chg";
137                         richtek,vinovp-microvolt = <14500000>;
138 
139                         otg_vbus_regulator: usb-otg-vbus-regulator {
140                                 regulator-compatible = "usb-otg-vbus";
141                                 regulator-name = "usb-otg-vbus";
142                                 regulator-min-microvolt = <4425000>;
143                                 regulator-max-microvolt = <5825000>;
144                         };
145                 };
146 
147                 regulator {
148                         compatible = "mediatek,mt6360-regulator";
149                         LDO_VIN3-supply = <&mt6360_buck2>;
150 
151                         mt6360_buck1: buck1 {
152                                 regulator-compatible = "BUCK1";
153                                 regulator-name = "mt6360,buck1";
154                                 regulator-min-microvolt = <300000>;
155                                 regulator-max-microvolt = <1300000>;
156                                 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
157                                                            MT6360_OPMODE_LP
158                                                            MT6360_OPMODE_ULP>;
159                                 regulator-always-on;
160                         };
161 
162                         mt6360_buck2: buck2 {
163                                 regulator-compatible = "BUCK2";
164                                 regulator-name = "mt6360,buck2";
165                                 regulator-min-microvolt = <300000>;
166                                 regulator-max-microvolt = <1300000>;
167                                 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
168                                                            MT6360_OPMODE_LP
169                                                            MT6360_OPMODE_ULP>;
170                                 regulator-always-on;
171                         };
172 
173                         mt6360_ldo1: ldo1 {
174                                 regulator-compatible = "LDO1";
175                                 regulator-name = "mt6360,ldo1";
176                                 regulator-min-microvolt = <1200000>;
177                                 regulator-max-microvolt = <3600000>;
178                                 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
179                                                            MT6360_OPMODE_LP>;
180                         };
181 
182                         mt6360_ldo2: ldo2 {
183                                 regulator-compatible = "LDO2";
184                                 regulator-name = "mt6360,ldo2";
185                                 regulator-min-microvolt = <1200000>;
186                                 regulator-max-microvolt = <3600000>;
187                                 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
188                                                            MT6360_OPMODE_LP>;
189                         };
190 
191                         mt6360_ldo3: ldo3 {
192                                 regulator-compatible = "LDO3";
193                                 regulator-name = "mt6360,ldo3";
194                                 regulator-min-microvolt = <1200000>;
195                                 regulator-max-microvolt = <3600000>;
196                                 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
197                                                            MT6360_OPMODE_LP>;
198                         };
199 
200                         mt6360_ldo5: ldo5 {
201                                 regulator-compatible = "LDO5";
202                                 regulator-name = "mt6360,ldo5";
203                                 regulator-min-microvolt = <2700000>;
204                                 regulator-max-microvolt = <3600000>;
205                                 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
206                                                            MT6360_OPMODE_LP>;
207                         };
208 
209                         mt6360_ldo6: ldo6 {
210                                 regulator-compatible = "LDO6";
211                                 regulator-name = "mt6360,ldo6";
212                                 regulator-min-microvolt = <500000>;
213                                 regulator-max-microvolt = <2100000>;
214                                 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
215                                                            MT6360_OPMODE_LP>;
216                         };
217 
218                         mt6360_ldo7: ldo7 {
219                                 regulator-compatible = "LDO7";
220                                 regulator-name = "mt6360,ldo7";
221                                 regulator-min-microvolt = <500000>;
222                                 regulator-max-microvolt = <2100000>;
223                                 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
224                                                            MT6360_OPMODE_LP>;
225                                 regulator-always-on;
226                         };
227                 };
228         };
229 };
230 
231 &mmc0 {
232         status = "okay";
233         pinctrl-names = "default", "state_uhs";
234         pinctrl-0 = <&mmc0_default_pins>;
235         pinctrl-1 = <&mmc0_uhs_pins>;
236         bus-width = <8>;
237         max-frequency = <200000000>;
238         cap-mmc-highspeed;
239         mmc-hs200-1_8v;
240         mmc-hs400-1_8v;
241         cap-mmc-hw-reset;
242         no-sdio;
243         no-sd;
244         hs400-ds-delay = <0x14c11>;
245         vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
246         vqmmc-supply = <&mt6359_vufs_ldo_reg>;
247         non-removable;
248 };
249 
250 &mmc1 {
251         pinctrl-names = "default", "state_uhs";
252         pinctrl-0 = <&mmc1_default_pins>;
253         pinctrl-1 = <&mmc1_uhs_pins>;
254         cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>;
255         bus-width = <4>;
256         max-frequency = <200000000>;
257         cap-sd-highspeed;
258         sd-uhs-sdr50;
259         sd-uhs-sdr104;
260         vmmc-supply = <&mt6360_ldo5>;
261         vqmmc-supply = <&mt6360_ldo3>;
262         status = "okay";
263 };
264 
265 &mt6359_vbbck_ldo_reg {
266         regulator-always-on;
267 };
268 
269 &mt6359_vcore_buck_reg {
270         regulator-always-on;
271 };
272 
273 &mt6359_vgpu11_buck_reg {
274         regulator-always-on;
275 };
276 
277 &mt6359_vproc1_buck_reg {
278         regulator-always-on;
279 };
280 
281 &mt6359_vproc2_buck_reg {
282         regulator-always-on;
283 };
284 
285 &mt6359_vpu_buck_reg {
286         regulator-always-on;
287 };
288 
289 &mt6359_vrf12_ldo_reg {
290         regulator-always-on;
291 };
292 
293 &mt6359_vsram_md_ldo_reg {
294         regulator-always-on;
295 };
296 
297 &mt6359_vsram_others_ldo_reg {
298         regulator-always-on;
299 };
300 
301 &pio {
302         eth_default_pins: eth-default-pins {
303                 pins-txd {
304                         pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
305                                  <PINMUX_GPIO78__FUNC_GBE_TXD2>,
306                                  <PINMUX_GPIO79__FUNC_GBE_TXD1>,
307                                  <PINMUX_GPIO80__FUNC_GBE_TXD0>;
308                         drive-strength = <8>;
309                 };
310                 pins-cc {
311                         pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
312                                  <PINMUX_GPIO88__FUNC_GBE_TXEN>,
313                                  <PINMUX_GPIO87__FUNC_GBE_RXDV>,
314                                  <PINMUX_GPIO86__FUNC_GBE_RXC>;
315                         drive-strength = <8>;
316                 };
317                 pins-rxd {
318                         pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
319                                  <PINMUX_GPIO82__FUNC_GBE_RXD2>,
320                                  <PINMUX_GPIO83__FUNC_GBE_RXD1>,
321                                  <PINMUX_GPIO84__FUNC_GBE_RXD0>;
322                 };
323                 pins-mdio {
324                         pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
325                                  <PINMUX_GPIO90__FUNC_GBE_MDIO>;
326                         input-enable;
327                 };
328                 pins-power {
329                         pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
330                                  <PINMUX_GPIO92__FUNC_GPIO92>;
331                         output-high;
332                 };
333         };
334 
335         eth_sleep_pins: eth-sleep-pins {
336                 pins-txd {
337                         pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
338                                  <PINMUX_GPIO78__FUNC_GPIO78>,
339                                  <PINMUX_GPIO79__FUNC_GPIO79>,
340                                  <PINMUX_GPIO80__FUNC_GPIO80>;
341                 };
342                 pins-cc {
343                         pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
344                                  <PINMUX_GPIO88__FUNC_GPIO88>,
345                                  <PINMUX_GPIO87__FUNC_GPIO87>,
346                                  <PINMUX_GPIO86__FUNC_GPIO86>;
347                 };
348                 pins-rxd {
349                         pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
350                                  <PINMUX_GPIO82__FUNC_GPIO82>,
351                                  <PINMUX_GPIO83__FUNC_GPIO83>,
352                                  <PINMUX_GPIO84__FUNC_GPIO84>;
353                 };
354                 pins-mdio {
355                         pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
356                                  <PINMUX_GPIO90__FUNC_GPIO90>;
357                         input-disable;
358                         bias-disable;
359                 };
360         };
361 
362         gpio_keys_pins: gpio-keys-pins {
363                 pins {
364                         pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
365                         input-enable;
366                 };
367         };
368 
369         i2c6_pins: i2c6-pins {
370                 pins {
371                         pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
372                                  <PINMUX_GPIO26__FUNC_SCL6>;
373                         bias-pull-up;
374                 };
375         };
376 
377         mmc0_default_pins: mmc0-default-pins {
378                 pins-clk {
379                         pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
380                         drive-strength = <6>;
381                         bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
382                 };
383 
384                 pins-cmd-dat {
385                         pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
386                                  <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
387                                  <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
388                                  <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
389                                  <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
390                                  <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
391                                  <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
392                                  <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
393                                  <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
394                         input-enable;
395                         drive-strength = <6>;
396                         bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
397                 };
398 
399                 pins-rst {
400                         pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
401                         drive-strength = <6>;
402                         bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
403                 };
404         };
405 
406         mmc0_uhs_pins: mmc0-uhs-pins {
407                 pins-clk {
408                         pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
409                         drive-strength = <8>;
410                         bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
411                 };
412 
413                 pins-cmd-dat {
414                         pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
415                                  <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
416                                  <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
417                                  <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
418                                  <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
419                                  <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
420                                  <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
421                                  <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
422                                  <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
423                         input-enable;
424                         drive-strength = <8>;
425                         bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
426                 };
427 
428                 pins-ds {
429                         pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
430                         drive-strength = <8>;
431                         bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
432                 };
433 
434                 pins-rst {
435                         pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
436                         drive-strength = <8>;
437                         bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
438                 };
439         };
440 
441         mmc1_default_pins: mmc1-default-pins {
442                 pins-clk {
443                         pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
444                         drive-strength = <8>;
445                         bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
446                 };
447 
448                 pins-cmd-dat {
449                         pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
450                                  <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
451                                  <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
452                                  <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
453                                  <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
454                         input-enable;
455                         drive-strength = <8>;
456                         bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
457                 };
458 
459                 pins-insert {
460                         pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
461                         bias-pull-up;
462                 };
463         };
464 
465         mmc1_uhs_pins: mmc1-uhs-pins {
466                 pins-clk {
467                         pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
468                         drive-strength = <8>;
469                         bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
470                 };
471 
472                 pins-cmd-dat {
473                         pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
474                                  <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
475                                  <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
476                                  <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
477                                  <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
478                         input-enable;
479                         drive-strength = <8>;
480                         bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
481                 };
482         };
483 
484         uart0_pins: uart0-pins {
485                 pins {
486                         pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
487                                  <PINMUX_GPIO99__FUNC_URXD0>;
488                 };
489         };
490 
491         uart1_pins: uart1-pins {
492                 pins {
493                         pinmux = <PINMUX_GPIO102__FUNC_UTXD1>,
494                                  <PINMUX_GPIO103__FUNC_URXD1>;
495                 };
496         };
497 };
498 
499 
500 &pmic {
501         interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
502 };
503 
504 &uart0 {
505         pinctrl-names = "default";
506         pinctrl-0 = <&uart0_pins>;
507         status = "okay";
508 };
509 
510 &uart1 {
511         pinctrl-names = "default";
512         pinctrl-0 = <&uart1_pins>;
513         status = "okay";
514 };
515 
516 &u3phy0 {
517         status = "okay";
518 };
519 
520 &u3phy1 {
521         status = "okay";
522 };
523 
524 &u3phy2 {
525         status = "okay";
526 };
527 
528 &u3phy3 {
529         status = "okay";
530 };
531 
532 &ssusb0 {
533         vusb33-supply = <&mt6359_vusb_ldo_reg>;
534         status = "okay";
535 };
536 
537 &ssusb2 {
538         vusb33-supply = <&mt6359_vusb_ldo_reg>;
539         status = "okay";
540 };
541 
542 &ssusb3 {
543         vusb33-supply = <&mt6359_vusb_ldo_reg>;
544         status = "okay";
545 };
546 
547 &xhci0 {
548         vbus-supply = <&otg_vbus_regulator>;
549         status = "okay";
550 };
551 
552 &xhci1 {
553         vusb33-supply = <&mt6359_vusb_ldo_reg>;
554         status = "okay";
555 };
556 
557 &xhci2 {
558         status = "okay";
559 };
560 
561 &xhci3 {
562         status = "okay";
563 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php