1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2 /*
3 * IPQ9574 SoC device tree source
4 *
5 * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
6 * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
7 */
8
9 #include <dt-bindings/clock/qcom,apss-ipq.h>
10 #include <dt-bindings/clock/qcom,ipq9574-gcc.h>
11 #include <dt-bindings/interconnect/qcom,ipq9574.h>
12 #include <dt-bindings/interrupt-controller/arm-gic.h>
13 #include <dt-bindings/reset/qcom,ipq9574-gcc.h>
14 #include <dt-bindings/thermal/thermal.h>
15
16 / {
17 interrupt-parent = <&intc>;
18 #address-cells = <2>;
19 #size-cells = <2>;
20
21 clocks {
22 sleep_clk: sleep-clk {
23 compatible = "fixed-clock";
24 #clock-cells = <0>;
25 };
26
27 xo_board_clk: xo-board-clk {
28 compatible = "fixed-clock";
29 #clock-cells = <0>;
30 };
31 };
32
33 cpus {
34 #address-cells = <1>;
35 #size-cells = <0>;
36
37 CPU0: cpu@0 {
38 device_type = "cpu";
39 compatible = "arm,cortex-a73";
40 reg = <0x0>;
41 enable-method = "psci";
42 next-level-cache = <&L2_0>;
43 clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
44 clock-names = "cpu";
45 operating-points-v2 = <&cpu_opp_table>;
46 cpu-supply = <&ipq9574_s1>;
47 #cooling-cells = <2>;
48 };
49
50 CPU1: cpu@1 {
51 device_type = "cpu";
52 compatible = "arm,cortex-a73";
53 reg = <0x1>;
54 enable-method = "psci";
55 next-level-cache = <&L2_0>;
56 clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
57 clock-names = "cpu";
58 operating-points-v2 = <&cpu_opp_table>;
59 cpu-supply = <&ipq9574_s1>;
60 #cooling-cells = <2>;
61 };
62
63 CPU2: cpu@2 {
64 device_type = "cpu";
65 compatible = "arm,cortex-a73";
66 reg = <0x2>;
67 enable-method = "psci";
68 next-level-cache = <&L2_0>;
69 clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
70 clock-names = "cpu";
71 operating-points-v2 = <&cpu_opp_table>;
72 cpu-supply = <&ipq9574_s1>;
73 #cooling-cells = <2>;
74 };
75
76 CPU3: cpu@3 {
77 device_type = "cpu";
78 compatible = "arm,cortex-a73";
79 reg = <0x3>;
80 enable-method = "psci";
81 next-level-cache = <&L2_0>;
82 clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
83 clock-names = "cpu";
84 operating-points-v2 = <&cpu_opp_table>;
85 cpu-supply = <&ipq9574_s1>;
86 #cooling-cells = <2>;
87 };
88
89 L2_0: l2-cache {
90 compatible = "cache";
91 cache-level = <2>;
92 cache-unified;
93 };
94 };
95
96 firmware {
97 scm {
98 compatible = "qcom,scm-ipq9574", "qcom,scm";
99 qcom,dload-mode = <&tcsr 0x6100>;
100 };
101 };
102
103 memory@40000000 {
104 device_type = "memory";
105 /* We expect the bootloader to fill in the size */
106 reg = <0x0 0x40000000 0x0 0x0>;
107 };
108
109 cpu_opp_table: opp-table-cpu {
110 compatible = "operating-points-v2-kryo-cpu";
111 opp-shared;
112 nvmem-cells = <&cpu_speed_bin>;
113
114 opp-936000000 {
115 opp-hz = /bits/ 64 <936000000>;
116 opp-microvolt = <725000>;
117 opp-supported-hw = <0xf>;
118 clock-latency-ns = <200000>;
119 };
120
121 opp-1104000000 {
122 opp-hz = /bits/ 64 <1104000000>;
123 opp-microvolt = <787500>;
124 opp-supported-hw = <0xf>;
125 clock-latency-ns = <200000>;
126 };
127
128 opp-1200000000 {
129 opp-hz = /bits/ 64 <1200000000>;
130 opp-microvolt = <862500>;
131 opp-supported-hw = <0xf>;
132 clock-latency-ns = <200000>;
133 };
134
135 opp-1416000000 {
136 opp-hz = /bits/ 64 <1416000000>;
137 opp-microvolt = <862500>;
138 opp-supported-hw = <0x7>;
139 clock-latency-ns = <200000>;
140 };
141
142 opp-1488000000 {
143 opp-hz = /bits/ 64 <1488000000>;
144 opp-microvolt = <925000>;
145 opp-supported-hw = <0x7>;
146 clock-latency-ns = <200000>;
147 };
148
149 opp-1800000000 {
150 opp-hz = /bits/ 64 <1800000000>;
151 opp-microvolt = <987500>;
152 opp-supported-hw = <0x5>;
153 clock-latency-ns = <200000>;
154 };
155
156 opp-2208000000 {
157 opp-hz = /bits/ 64 <2208000000>;
158 opp-microvolt = <1062500>;
159 opp-supported-hw = <0x1>;
160 clock-latency-ns = <200000>;
161 };
162 };
163
164 pmu {
165 compatible = "arm,cortex-a73-pmu";
166 interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
167 };
168
169 psci {
170 compatible = "arm,psci-1.0";
171 method = "smc";
172 };
173
174 rpm: remoteproc {
175 compatible = "qcom,ipq9574-rpm-proc", "qcom,rpm-proc";
176
177 glink-edge {
178 compatible = "qcom,glink-rpm";
179 interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
180 qcom,rpm-msg-ram = <&rpm_msg_ram>;
181 mboxes = <&apcs_glb 0>;
182
183 rpm_requests: rpm-requests {
184 compatible = "qcom,rpm-ipq9574";
185 qcom,glink-channels = "rpm_requests";
186 };
187 };
188 };
189
190 reserved-memory {
191 #address-cells = <2>;
192 #size-cells = <2>;
193 ranges;
194
195 bootloader@4a100000 {
196 reg = <0x0 0x4a100000 0x0 0x400000>;
197 no-map;
198 };
199
200 sbl@4a500000 {
201 reg = <0x0 0x4a500000 0x0 0x100000>;
202 no-map;
203 };
204
205 tz_region: tz@4a600000 {
206 reg = <0x0 0x4a600000 0x0 0x400000>;
207 no-map;
208 };
209
210 smem@4aa00000 {
211 compatible = "qcom,smem";
212 reg = <0x0 0x4aa00000 0x0 0x100000>;
213 hwlocks = <&tcsr_mutex 3>;
214 no-map;
215 };
216 };
217
218 soc: soc@0 {
219 compatible = "simple-bus";
220 #address-cells = <1>;
221 #size-cells = <1>;
222 ranges = <0 0 0 0xffffffff>;
223
224 rpm_msg_ram: sram@60000 {
225 compatible = "qcom,rpm-msg-ram";
226 reg = <0x00060000 0x6000>;
227 };
228
229 rng: rng@e3000 {
230 compatible = "qcom,prng-ee";
231 reg = <0x000e3000 0x1000>;
232 clocks = <&gcc GCC_PRNG_AHB_CLK>;
233 clock-names = "core";
234 };
235
236 mdio: mdio@90000 {
237 compatible = "qcom,ipq9574-mdio", "qcom,ipq4019-mdio";
238 reg = <0x00090000 0x64>;
239 #address-cells = <1>;
240 #size-cells = <0>;
241 clocks = <&gcc GCC_MDIO_AHB_CLK>;
242 clock-names = "gcc_mdio_ahb_clk";
243 status = "disabled";
244 };
245
246 qfprom: efuse@a4000 {
247 compatible = "qcom,ipq9574-qfprom", "qcom,qfprom";
248 reg = <0x000a4000 0x5a1>;
249 #address-cells = <1>;
250 #size-cells = <1>;
251
252 cpu_speed_bin: cpu-speed-bin@15 {
253 reg = <0x15 0x2>;
254 bits = <7 2>;
255 };
256 };
257
258 cryptobam: dma-controller@704000 {
259 compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
260 reg = <0x00704000 0x20000>;
261 interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
262 #dma-cells = <1>;
263 qcom,ee = <1>;
264 qcom,controlled-remotely;
265 };
266
267 crypto: crypto@73a000 {
268 compatible = "qcom,ipq9574-qce", "qcom,ipq4019-qce", "qcom,qce";
269 reg = <0x0073a000 0x6000>;
270 clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
271 <&gcc GCC_CRYPTO_AXI_CLK>,
272 <&gcc GCC_CRYPTO_CLK>;
273 clock-names = "iface", "bus", "core";
274 dmas = <&cryptobam 2>, <&cryptobam 3>;
275 dma-names = "rx", "tx";
276 };
277
278 tsens: thermal-sensor@4a9000 {
279 compatible = "qcom,ipq9574-tsens", "qcom,ipq8074-tsens";
280 reg = <0x004a9000 0x1000>,
281 <0x004a8000 0x1000>;
282 interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
283 interrupt-names = "combined";
284 #qcom,sensors = <16>;
285 #thermal-sensor-cells = <1>;
286 };
287
288 tlmm: pinctrl@1000000 {
289 compatible = "qcom,ipq9574-tlmm";
290 reg = <0x01000000 0x300000>;
291 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
292 gpio-controller;
293 #gpio-cells = <2>;
294 gpio-ranges = <&tlmm 0 0 65>;
295 interrupt-controller;
296 #interrupt-cells = <2>;
297
298 uart2_pins: uart2-state {
299 pins = "gpio34", "gpio35";
300 function = "blsp2_uart";
301 drive-strength = <8>;
302 bias-disable;
303 };
304 };
305
306 gcc: clock-controller@1800000 {
307 compatible = "qcom,ipq9574-gcc";
308 reg = <0x01800000 0x80000>;
309 clocks = <&xo_board_clk>,
310 <&sleep_clk>,
311 <0>,
312 <0>,
313 <0>,
314 <0>,
315 <0>,
316 <0>;
317 #clock-cells = <1>;
318 #reset-cells = <1>;
319 #interconnect-cells = <1>;
320 };
321
322 tcsr_mutex: hwlock@1905000 {
323 compatible = "qcom,tcsr-mutex";
324 reg = <0x01905000 0x20000>;
325 #hwlock-cells = <1>;
326 };
327
328 tcsr: syscon@1937000 {
329 compatible = "qcom,tcsr-ipq9574", "syscon";
330 reg = <0x01937000 0x21000>;
331 };
332
333 sdhc_1: mmc@7804000 {
334 compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
335 reg = <0x07804000 0x1000>,
336 <0x07805000 0x1000>,
337 <0x07808000 0x2000>;
338 reg-names = "hc", "cqhci", "ice";
339
340 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
341 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
342 interrupt-names = "hc_irq", "pwr_irq";
343
344 clocks = <&gcc GCC_SDCC1_AHB_CLK>,
345 <&gcc GCC_SDCC1_APPS_CLK>,
346 <&xo_board_clk>,
347 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
348 clock-names = "iface", "core", "xo", "ice";
349 non-removable;
350 supports-cqe;
351 status = "disabled";
352 };
353
354 blsp_dma: dma-controller@7884000 {
355 compatible = "qcom,bam-v1.7.0";
356 reg = <0x07884000 0x2b000>;
357 interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
358 clocks = <&gcc GCC_BLSP1_AHB_CLK>;
359 clock-names = "bam_clk";
360 #dma-cells = <1>;
361 qcom,ee = <0>;
362 };
363
364 blsp1_uart0: serial@78af000 {
365 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
366 reg = <0x078af000 0x200>;
367 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
368 clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
369 <&gcc GCC_BLSP1_AHB_CLK>;
370 clock-names = "core", "iface";
371 status = "disabled";
372 };
373
374 blsp1_uart1: serial@78b0000 {
375 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
376 reg = <0x078b0000 0x200>;
377 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
378 clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
379 <&gcc GCC_BLSP1_AHB_CLK>;
380 clock-names = "core", "iface";
381 status = "disabled";
382 };
383
384 blsp1_uart2: serial@78b1000 {
385 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
386 reg = <0x078b1000 0x200>;
387 interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
388 clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
389 <&gcc GCC_BLSP1_AHB_CLK>;
390 clock-names = "core", "iface";
391 status = "disabled";
392 };
393
394 blsp1_uart3: serial@78b2000 {
395 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
396 reg = <0x078b2000 0x200>;
397 interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
398 clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>,
399 <&gcc GCC_BLSP1_AHB_CLK>;
400 clock-names = "core", "iface";
401 status = "disabled";
402 };
403
404 blsp1_uart4: serial@78b3000 {
405 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
406 reg = <0x078b3000 0x200>;
407 interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
408 clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
409 <&gcc GCC_BLSP1_AHB_CLK>;
410 clock-names = "core", "iface";
411 status = "disabled";
412 };
413
414 blsp1_uart5: serial@78b4000 {
415 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
416 reg = <0x078b4000 0x200>;
417 interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
418 clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
419 <&gcc GCC_BLSP1_AHB_CLK>;
420 clock-names = "core", "iface";
421 status = "disabled";
422 };
423
424 blsp1_spi0: spi@78b5000 {
425 compatible = "qcom,spi-qup-v2.2.1";
426 reg = <0x078b5000 0x600>;
427 #address-cells = <1>;
428 #size-cells = <0>;
429 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
430 clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
431 <&gcc GCC_BLSP1_AHB_CLK>;
432 clock-names = "core", "iface";
433 dmas = <&blsp_dma 12>, <&blsp_dma 13>;
434 dma-names = "tx", "rx";
435 status = "disabled";
436 };
437
438 blsp1_i2c1: i2c@78b6000 {
439 compatible = "qcom,i2c-qup-v2.2.1";
440 reg = <0x078b6000 0x600>;
441 #address-cells = <1>;
442 #size-cells = <0>;
443 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
444 clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
445 <&gcc GCC_BLSP1_AHB_CLK>;
446 clock-names = "core", "iface";
447 assigned-clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
448 assigned-clock-rates = <50000000>;
449 dmas = <&blsp_dma 14>, <&blsp_dma 15>;
450 dma-names = "tx", "rx";
451 status = "disabled";
452 };
453
454 blsp1_spi1: spi@78b6000 {
455 compatible = "qcom,spi-qup-v2.2.1";
456 reg = <0x078b6000 0x600>;
457 #address-cells = <1>;
458 #size-cells = <0>;
459 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
460 clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
461 <&gcc GCC_BLSP1_AHB_CLK>;
462 clock-names = "core", "iface";
463 dmas = <&blsp_dma 14>, <&blsp_dma 15>;
464 dma-names = "tx", "rx";
465 status = "disabled";
466 };
467
468 blsp1_i2c2: i2c@78b7000 {
469 compatible = "qcom,i2c-qup-v2.2.1";
470 reg = <0x078b7000 0x600>;
471 #address-cells = <1>;
472 #size-cells = <0>;
473 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
474 clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
475 <&gcc GCC_BLSP1_AHB_CLK>;
476 clock-names = "core", "iface";
477 assigned-clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
478 assigned-clock-rates = <50000000>;
479 dmas = <&blsp_dma 16>, <&blsp_dma 17>;
480 dma-names = "tx", "rx";
481 status = "disabled";
482 };
483
484 blsp1_spi2: spi@78b7000 {
485 compatible = "qcom,spi-qup-v2.2.1";
486 reg = <0x078b7000 0x600>;
487 #address-cells = <1>;
488 #size-cells = <0>;
489 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
490 clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
491 <&gcc GCC_BLSP1_AHB_CLK>;
492 clock-names = "core", "iface";
493 dmas = <&blsp_dma 16>, <&blsp_dma 17>;
494 dma-names = "tx", "rx";
495 status = "disabled";
496 };
497
498 blsp1_i2c3: i2c@78b8000 {
499 compatible = "qcom,i2c-qup-v2.2.1";
500 reg = <0x078b8000 0x600>;
501 #address-cells = <1>;
502 #size-cells = <0>;
503 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
504 clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
505 <&gcc GCC_BLSP1_AHB_CLK>;
506 clock-names = "core", "iface";
507 assigned-clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
508 assigned-clock-rates = <50000000>;
509 dmas = <&blsp_dma 18>, <&blsp_dma 19>;
510 dma-names = "tx", "rx";
511 status = "disabled";
512 };
513
514 blsp1_spi3: spi@78b8000 {
515 compatible = "qcom,spi-qup-v2.2.1";
516 reg = <0x078b8000 0x600>;
517 #address-cells = <1>;
518 #size-cells = <0>;
519 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
520 spi-max-frequency = <50000000>;
521 clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
522 <&gcc GCC_BLSP1_AHB_CLK>;
523 clock-names = "core", "iface";
524 dmas = <&blsp_dma 18>, <&blsp_dma 19>;
525 dma-names = "tx", "rx";
526 status = "disabled";
527 };
528
529 blsp1_i2c4: i2c@78b9000 {
530 compatible = "qcom,i2c-qup-v2.2.1";
531 reg = <0x078b9000 0x600>;
532 #address-cells = <1>;
533 #size-cells = <0>;
534 interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
535 clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
536 <&gcc GCC_BLSP1_AHB_CLK>;
537 clock-names = "core", "iface";
538 assigned-clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
539 assigned-clock-rates = <50000000>;
540 dmas = <&blsp_dma 20>, <&blsp_dma 21>;
541 dma-names = "tx", "rx";
542 status = "disabled";
543 };
544
545 blsp1_spi4: spi@78b9000 {
546 compatible = "qcom,spi-qup-v2.2.1";
547 reg = <0x078b9000 0x600>;
548 #address-cells = <1>;
549 #size-cells = <0>;
550 interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
551 clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
552 <&gcc GCC_BLSP1_AHB_CLK>;
553 clock-names = "core", "iface";
554 dmas = <&blsp_dma 20>, <&blsp_dma 21>;
555 dma-names = "tx", "rx";
556 status = "disabled";
557 };
558
559 usb_0_qusbphy: phy@7b000 {
560 compatible = "qcom,ipq9574-qusb2-phy";
561 reg = <0x0007b000 0x180>;
562 #phy-cells = <0>;
563
564 clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
565 <&xo_board_clk>;
566 clock-names = "cfg_ahb",
567 "ref";
568
569 resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
570 status = "disabled";
571 };
572
573 usb_0_qmpphy: phy@7d000 {
574 compatible = "qcom,ipq9574-qmp-usb3-phy";
575 reg = <0x0007d000 0xa00>;
576 #phy-cells = <0>;
577
578 clocks = <&gcc GCC_USB0_AUX_CLK>,
579 <&xo_board_clk>,
580 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
581 <&gcc GCC_USB0_PIPE_CLK>;
582 clock-names = "aux",
583 "ref",
584 "cfg_ahb",
585 "pipe";
586
587 resets = <&gcc GCC_USB0_PHY_BCR>,
588 <&gcc GCC_USB3PHY_0_PHY_BCR>;
589 reset-names = "phy",
590 "phy_phy";
591
592 #clock-cells = <0>;
593 clock-output-names = "usb0_pipe_clk";
594
595 status = "disabled";
596 };
597
598 usb3: usb@8af8800 {
599 compatible = "qcom,ipq9574-dwc3", "qcom,dwc3";
600 reg = <0x08af8800 0x400>;
601 #address-cells = <1>;
602 #size-cells = <1>;
603 ranges;
604
605 clocks = <&gcc GCC_SNOC_USB_CLK>,
606 <&gcc GCC_USB0_MASTER_CLK>,
607 <&gcc GCC_ANOC_USB_AXI_CLK>,
608 <&gcc GCC_USB0_SLEEP_CLK>,
609 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
610
611 clock-names = "cfg_noc",
612 "core",
613 "iface",
614 "sleep",
615 "mock_utmi";
616
617 assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
618 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
619 assigned-clock-rates = <200000000>,
620 <24000000>;
621
622 interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
623 interrupt-names = "pwr_event";
624
625 resets = <&gcc GCC_USB_BCR>;
626 status = "disabled";
627
628 usb_0_dwc3: usb@8a00000 {
629 compatible = "snps,dwc3";
630 reg = <0x8a00000 0xcd00>;
631 clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
632 clock-names = "ref";
633 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
634 phys = <&usb_0_qusbphy>, <&usb_0_qmpphy>;
635 phy-names = "usb2-phy", "usb3-phy";
636 tx-fifo-resize;
637 snps,is-utmi-l1-suspend;
638 snps,hird-threshold = /bits/ 8 <0x0>;
639 snps,dis_u2_susphy_quirk;
640 snps,dis_u3_susphy_quirk;
641 };
642 };
643
644 intc: interrupt-controller@b000000 {
645 compatible = "qcom,msm-qgic2";
646 reg = <0x0b000000 0x1000>, /* GICD */
647 <0x0b002000 0x2000>, /* GICC */
648 <0x0b001000 0x1000>, /* GICH */
649 <0x0b004000 0x2000>; /* GICV */
650 #address-cells = <1>;
651 #size-cells = <1>;
652 interrupt-controller;
653 #interrupt-cells = <3>;
654 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
655 ranges = <0 0x0b00c000 0x3000>;
656
657 v2m0: v2m@0 {
658 compatible = "arm,gic-v2m-frame";
659 reg = <0x00000000 0xffd>;
660 msi-controller;
661 };
662
663 v2m1: v2m@1000 {
664 compatible = "arm,gic-v2m-frame";
665 reg = <0x00001000 0xffd>;
666 msi-controller;
667 };
668
669 v2m2: v2m@2000 {
670 compatible = "arm,gic-v2m-frame";
671 reg = <0x00002000 0xffd>;
672 msi-controller;
673 };
674 };
675
676 watchdog: watchdog@b017000 {
677 compatible = "qcom,apss-wdt-ipq9574", "qcom,kpss-wdt";
678 reg = <0x0b017000 0x1000>;
679 interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
680 clocks = <&sleep_clk>;
681 timeout-sec = <30>;
682 };
683
684 apcs_glb: mailbox@b111000 {
685 compatible = "qcom,ipq9574-apcs-apps-global",
686 "qcom,ipq6018-apcs-apps-global";
687 reg = <0x0b111000 0x1000>;
688 #clock-cells = <1>;
689 clocks = <&a73pll>, <&xo_board_clk>, <&gcc GPLL0>;
690 clock-names = "pll", "xo", "gpll0";
691 #mbox-cells = <1>;
692 };
693
694 a73pll: clock@b116000 {
695 compatible = "qcom,ipq9574-a73pll";
696 reg = <0x0b116000 0x40>;
697 #clock-cells = <0>;
698 clocks = <&xo_board_clk>;
699 clock-names = "xo";
700 };
701
702 timer@b120000 {
703 compatible = "arm,armv7-timer-mem";
704 reg = <0x0b120000 0x1000>;
705 #address-cells = <1>;
706 #size-cells = <1>;
707 ranges;
708
709 frame@b120000 {
710 reg = <0x0b121000 0x1000>,
711 <0x0b122000 0x1000>;
712 frame-number = <0>;
713 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
714 <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
715 };
716
717 frame@b123000 {
718 reg = <0x0b123000 0x1000>;
719 frame-number = <1>;
720 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
721 status = "disabled";
722 };
723
724 frame@b124000 {
725 reg = <0x0b124000 0x1000>;
726 frame-number = <2>;
727 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
728 status = "disabled";
729 };
730
731 frame@b125000 {
732 reg = <0x0b125000 0x1000>;
733 frame-number = <3>;
734 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
735 status = "disabled";
736 };
737
738 frame@b126000 {
739 reg = <0x0b126000 0x1000>;
740 frame-number = <4>;
741 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
742 status = "disabled";
743 };
744
745 frame@b127000 {
746 reg = <0x0b127000 0x1000>;
747 frame-number = <5>;
748 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
749 status = "disabled";
750 };
751
752 frame@b128000 {
753 reg = <0x0b128000 0x1000>;
754 frame-number = <6>;
755 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
756 status = "disabled";
757 };
758 };
759 };
760
761 thermal-zones {
762 nss-top-thermal {
763 thermal-sensors = <&tsens 3>;
764
765 trips {
766 nss-top-critical {
767 temperature = <125000>;
768 hysteresis = <1000>;
769 type = "critical";
770 };
771 };
772 };
773
774 ubi-0-thermal {
775 thermal-sensors = <&tsens 4>;
776
777 trips {
778 ubi_0-critical {
779 temperature = <125000>;
780 hysteresis = <1000>;
781 type = "critical";
782 };
783 };
784 };
785
786 ubi-1-thermal {
787 thermal-sensors = <&tsens 5>;
788
789 trips {
790 ubi_1-critical {
791 temperature = <125000>;
792 hysteresis = <1000>;
793 type = "critical";
794 };
795 };
796 };
797
798 ubi-2-thermal {
799 thermal-sensors = <&tsens 6>;
800
801 trips {
802 ubi_2-critical {
803 temperature = <125000>;
804 hysteresis = <1000>;
805 type = "critical";
806 };
807 };
808 };
809
810 ubi-3-thermal {
811 thermal-sensors = <&tsens 7>;
812
813 trips {
814 ubi_3-critical {
815 temperature = <125000>;
816 hysteresis = <1000>;
817 type = "critical";
818 };
819 };
820 };
821
822 cpuss0-thermal {
823 thermal-sensors = <&tsens 8>;
824
825 trips {
826 cpu-critical {
827 temperature = <125000>;
828 hysteresis = <1000>;
829 type = "critical";
830 };
831 };
832 };
833
834 cpuss1-thermal {
835 thermal-sensors = <&tsens 9>;
836
837 trips {
838 cpu-critical {
839 temperature = <125000>;
840 hysteresis = <1000>;
841 type = "critical";
842 };
843 };
844 };
845
846 cpu0-thermal {
847 thermal-sensors = <&tsens 10>;
848
849 trips {
850 cpu0_crit: cpu-critical {
851 temperature = <120000>;
852 hysteresis = <10000>;
853 type = "critical";
854 };
855
856 cpu0_alert: cpu-passive {
857 temperature = <110000>;
858 hysteresis = <1000>;
859 type = "passive";
860 };
861 };
862
863 cooling-maps {
864 map0 {
865 trip = <&cpu0_alert>;
866 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
867 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
868 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
869 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
870 };
871 };
872 };
873
874 cpu1-thermal {
875 thermal-sensors = <&tsens 11>;
876
877 trips {
878 cpu1_crit: cpu-critical {
879 temperature = <120000>;
880 hysteresis = <10000>;
881 type = "critical";
882 };
883
884 cpu1_alert: cpu-passive {
885 temperature = <110000>;
886 hysteresis = <1000>;
887 type = "passive";
888 };
889 };
890
891 cooling-maps {
892 map0 {
893 trip = <&cpu1_alert>;
894 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
895 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
896 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
897 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
898 };
899 };
900 };
901
902 cpu2-thermal {
903 thermal-sensors = <&tsens 12>;
904
905 trips {
906 cpu2_crit: cpu-critical {
907 temperature = <120000>;
908 hysteresis = <10000>;
909 type = "critical";
910 };
911
912 cpu2_alert: cpu-passive {
913 temperature = <110000>;
914 hysteresis = <1000>;
915 type = "passive";
916 };
917 };
918
919 cooling-maps {
920 map0 {
921 trip = <&cpu2_alert>;
922 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
923 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
924 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
925 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
926 };
927 };
928 };
929
930 cpu3-thermal {
931 thermal-sensors = <&tsens 13>;
932
933 trips {
934 cpu3_crit: cpu-critical {
935 temperature = <120000>;
936 hysteresis = <10000>;
937 type = "critical";
938 };
939
940 cpu3_alert: cpu-passive {
941 temperature = <110000>;
942 hysteresis = <1000>;
943 type = "passive";
944 };
945 };
946
947 cooling-maps {
948 map0 {
949 trip = <&cpu3_alert>;
950 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
951 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
952 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
953 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
954 };
955 };
956 };
957
958 wcss-phyb-thermal {
959 thermal-sensors = <&tsens 14>;
960
961 trips {
962 wcss_phyb-critical {
963 temperature = <125000>;
964 hysteresis = <1000>;
965 type = "critical";
966 };
967 };
968 };
969
970 top-glue-thermal {
971 thermal-sensors = <&tsens 15>;
972
973 trips {
974 top_glue-critical {
975 temperature = <125000>;
976 hysteresis = <1000>;
977 type = "critical";
978 };
979 };
980 };
981 };
982
983 timer {
984 compatible = "arm,armv8-timer";
985 interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
986 <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
987 <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
988 <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
989 };
990 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.