1 // SPDX-License-Identifier: GPL-2.0-only
2
3 /dts-v1/;
4
5 #include "msm8916-pm8916.dtsi"
6 #include "msm8916-modem-qdsp6.dtsi"
7
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/leds/common.h>
11
12 / {
13 model = "GPLUS FL8005A";
14 compatible = "gplus,fl8005a", "qcom,msm8916";
15 chassis-type = "tablet";
16
17 aliases {
18 mmc0 = &sdhc_1; /* eMMC */
19 mmc1 = &sdhc_2; /* SD card */
20 serial0 = &blsp_uart2;
21 };
22
23 chosen {
24 stdout-path = "serial0";
25 };
26
27 battery: battery {
28 compatible = "simple-battery";
29 device-chemistry = "lithium-ion-polymer";
30 voltage-min-design-microvolt = <3700000>;
31 voltage-max-design-microvolt = <4200000>;
32 energy-full-design-microwatt-hours = <13690000>;
33 charge-full-design-microamp-hours = <3700000>;
34
35 ocv-capacity-celsius = <25>;
36 ocv-capacity-table-0 =
37 <4186000 100>, <4126000 95>, <4078000 90>,
38 <4036000 85>, <3997000 80>, <3962000 75>,
39 <3932000 70>, <3904000 65>, <3874000 60>,
40 <3839000 55>, <3809000 50>, <3792000 45>,
41 <3780000 40>, <3772000 35>, <3764000 30>,
42 <3752000 25>, <3731000 20>, <3704000 16>,
43 <3677000 13>, <3670000 11>, <3668000 10>,
44 <3666000 9>, <3662000 8>, <3658000 7>, <3648000 6>,
45 <3624000 5>, <3580000 4>, <3518000 3>, <3434000 2>,
46 <3310000 1>, <3000000 0>;
47 };
48
49 flash-led-controller {
50 /* Actually qcom,leds-gpio-flash */
51 compatible = "sgmicro,sgm3140";
52 enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
53 flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
54
55 pinctrl-0 = <&camera_flash_default>;
56 pinctrl-names = "default";
57
58 flash_led: led {
59 function = LED_FUNCTION_FLASH;
60 color = <LED_COLOR_ID_WHITE>;
61 flash-max-timeout-us = <250000>;
62 };
63 };
64
65 gpio-keys {
66 compatible = "gpio-keys";
67
68 pinctrl-0 = <&gpio_keys_default>;
69 pinctrl-names = "default";
70
71 button-volume-up {
72 label = "Volume Up";
73 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
74 linux,code = <KEY_VOLUMEUP>;
75 };
76 };
77
78 gpio-leds {
79 compatible = "gpio-leds";
80
81 pinctrl-0 = <&gpio_leds_default>;
82 pinctrl-names = "default";
83
84 led-red {
85 function = LED_FUNCTION_CHARGING;
86 color = <LED_COLOR_ID_RED>;
87 gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
88 retain-state-suspended;
89 };
90
91 led-green {
92 function = LED_FUNCTION_CHARGING;
93 color = <LED_COLOR_ID_GREEN>;
94 gpios = <&tlmm 118 GPIO_ACTIVE_HIGH>;
95 retain-state-suspended;
96 };
97 };
98
99 usb_id: usb-id {
100 compatible = "linux,extcon-usb-gpio";
101 id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
102 pinctrl-0 = <&usb_id_default>;
103 pinctrl-names = "default";
104 };
105 };
106
107 &blsp_i2c5 {
108 status = "okay";
109
110 touchscreen@38 {
111 /* Actually ft5402 */
112 compatible = "edt,edt-ft5406";
113 reg = <0x38>;
114
115 interrupt-parent = <&tlmm>;
116 interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
117
118 reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
119
120 vcc-supply = <&pm8916_l17>;
121 iovcc-supply = <&pm8916_l6>;
122
123 touchscreen-size-x = <800>;
124 touchscreen-size-y = <500>;
125 touchscreen-inverted-x;
126 touchscreen-swapped-x-y;
127
128 pinctrl-0 = <&touchscreen_default>;
129 pinctrl-names = "default";
130 };
131 };
132
133 &blsp_uart2 {
134 status = "okay";
135 };
136
137 &mpss_mem {
138 reg = <0x0 0x86800000 0x0 0x5000000>;
139 };
140
141 &pm8916_bms {
142 monitored-battery = <&battery>;
143 status = "okay";
144 };
145
146 &pm8916_codec {
147 qcom,micbias-lvl = <2800>;
148 qcom,mbhc-vthreshold-low = <150 180 237 450 500>;
149 qcom,mbhc-vthreshold-high = <150 180 237 450 500>;
150 qcom,hphl-jack-type-normally-open;
151 };
152
153 &pm8916_resin {
154 linux,code = <KEY_VOLUMEDOWN>;
155 status = "okay";
156 };
157
158 &pm8916_rpm_regulators {
159 pm8916_l17: l17 {
160 regulator-min-microvolt = <2850000>;
161 regulator-max-microvolt = <2850000>;
162 };
163 };
164
165 &pm8916_vib {
166 status = "okay";
167 };
168
169 &sdhc_1 {
170 status = "okay";
171 };
172
173 &sdhc_2 {
174 pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
175 pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
176 pinctrl-names = "default", "sleep";
177
178 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
179
180 status = "okay";
181 };
182
183 &sound {
184 model = "msm8916-1mic";
185 audio-routing =
186 "AMIC1", "MIC BIAS External1",
187 "AMIC2", "MIC BIAS Internal2",
188 "AMIC3", "MIC BIAS External1";
189 };
190
191 &usb {
192 extcon = <&usb_id>, <&usb_id>;
193 status = "okay";
194 };
195
196 &usb_hs_phy {
197 extcon = <&usb_id>;
198 };
199
200 &venus {
201 status = "okay";
202 };
203
204 &venus_mem {
205 status = "okay";
206 };
207
208 &wcnss {
209 status = "okay";
210 };
211
212 &wcnss_iris {
213 compatible = "qcom,wcn3620";
214 };
215
216 &wcnss_mem {
217 status = "okay";
218 };
219
220 &tlmm {
221 camera_flash_default: camera-flash-default-state {
222 pins = "gpio31", "gpio32";
223 function = "gpio";
224 drive-strength = <2>;
225 bias-disable;
226 };
227
228 gpio_keys_default: gpio-keys-default-state {
229 pins = "gpio107";
230 function = "gpio";
231 drive-strength = <2>;
232 bias-pull-up;
233 };
234
235 gpio_leds_default: gpio-led-default-state {
236 pins = "gpio117", "gpio118";
237 function = "gpio";
238 drive-strength = <2>;
239 bias-disable;
240 };
241
242 sdc2_cd_default: sdc2-cd-default-state {
243 pins = "gpio38";
244 function = "gpio";
245 drive-strength = <2>;
246 bias-disable;
247 };
248
249 touchscreen_default: touchscreen-default-state {
250 reset-pins {
251 pins = "gpio12";
252 function = "gpio";
253 drive-strength = <2>;
254 bias-disable;
255 };
256
257 touchscreen-pins {
258 pins = "gpio13";
259 function = "gpio";
260 drive-strength = <2>;
261 bias-pull-up;
262 };
263 };
264
265 usb_id_default: usb-id-default-state {
266 pins = "gpio110";
267 function = "gpio";
268 drive-strength = <8>;
269 bias-pull-up;
270 };
271 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.