1 // SPDX-License-Identifier: GPL-2.0-only
2
3 /dts-v1/;
4
5 #include "msm8916-pm8916.dtsi"
6 #include "msm8916-modem-qdsp6.dtsi"
7
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
12
13 / {
14 model = "BQ Aquaris X5 (Longcheer L8910)";
15 compatible = "longcheer,l8910", "qcom,msm8916";
16 chassis-type = "handset";
17
18 aliases {
19 mmc0 = &sdhc_1; /* eMMC */
20 mmc1 = &sdhc_2; /* SD card */
21 serial0 = &blsp_uart2;
22 };
23
24 chosen {
25 stdout-path = "serial0";
26 };
27
28 speaker_amp: audio-amplifier {
29 compatible = "awinic,aw8738";
30 mode-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>;
31 awinic,mode = <5>;
32 sound-name-prefix = "Speaker Amp";
33
34 pinctrl-0 = <&spk_ext_pa_default>;
35 pinctrl-names = "default";
36 };
37
38 flash-led-controller {
39 compatible = "ocs,ocp8110";
40 enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
41 flash-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>;
42
43 pinctrl-0 = <&camera_front_flash_default>;
44 pinctrl-names = "default";
45
46 flash_led: led {
47 function = LED_FUNCTION_FLASH;
48 color = <LED_COLOR_ID_WHITE>;
49 flash-max-timeout-us = <250000>;
50 };
51 };
52
53 gpio-keys {
54 compatible = "gpio-keys";
55
56 pinctrl-names = "default";
57 pinctrl-0 = <&gpio_keys_default>;
58
59 label = "GPIO Buttons";
60
61 button-volume-up {
62 label = "Volume Up";
63 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
64 linux,code = <KEY_VOLUMEUP>;
65 };
66 };
67
68 leds {
69 compatible = "gpio-leds";
70
71 led-0 {
72 gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
73 color = <LED_COLOR_ID_WHITE>;
74 default-state = "off";
75 function = LED_FUNCTION_KBD_BACKLIGHT;
76
77 pinctrl-names = "default";
78 pinctrl-0 = <&button_backlight_default>;
79 };
80 };
81
82 usb_id: usb-id {
83 compatible = "linux,extcon-usb-gpio";
84 id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
85 pinctrl-names = "default";
86 pinctrl-0 = <&usb_id_default>;
87 };
88 };
89
90 &blsp_i2c2 {
91 status = "okay";
92
93 led-controller@30 {
94 compatible = "kinetic,ktd2026";
95 reg = <0x30>;
96 #address-cells = <1>;
97 #size-cells = <0>;
98
99 vin-supply = <&pm8916_l17>;
100 vio-supply = <&pm8916_l6>;
101
102 pinctrl-0 = <&status_led_default>;
103 pinctrl-names = "default";
104
105 multi-led {
106 color = <LED_COLOR_ID_RGB>;
107 function = LED_FUNCTION_STATUS;
108
109 #address-cells = <1>;
110 #size-cells = <0>;
111
112 led@0 {
113 reg = <0>;
114 color = <LED_COLOR_ID_RED>;
115 };
116
117 led@1 {
118 reg = <1>;
119 color = <LED_COLOR_ID_GREEN>;
120 };
121
122 led@2 {
123 reg = <2>;
124 color = <LED_COLOR_ID_BLUE>;
125 };
126 };
127 };
128 };
129
130 &blsp_i2c3 {
131 status = "okay";
132
133 magnetometer@d {
134 compatible = "asahi-kasei,ak09911";
135 reg = <0x0d>;
136
137 vdd-supply = <&pm8916_l17>;
138 vid-supply = <&pm8916_l6>;
139
140 reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>;
141
142 pinctrl-names = "default";
143 pinctrl-0 = <&mag_reset_default>;
144 };
145
146 imu@68 {
147 compatible = "bosch,bmi160";
148 reg = <0x68>;
149
150 vdd-supply = <&pm8916_l17>;
151 vddio-supply = <&pm8916_l6>;
152
153 mount-matrix = "0", "1", "0",
154 "-1", "0", "0",
155 "0", "0", "1";
156 };
157 };
158
159 &blsp_uart2 {
160 status = "okay";
161 };
162
163 &mpss_mem {
164 reg = <0x0 0x86800000 0x0 0x5000000>;
165 };
166
167 &pm8916_codec {
168 qcom,micbias-lvl = <2800>;
169 qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
170 qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
171 qcom,hphl-jack-type-normally-open;
172 };
173
174 &pm8916_gpios {
175 status_led_default: status-led-default-state {
176 pins = "gpio3";
177 function = PMIC_GPIO_FUNC_NORMAL;
178 power-source = <PM8916_GPIO_VPH>;
179 bias-disable;
180 output-high;
181 };
182 };
183
184 &pm8916_resin {
185 status = "okay";
186 linux,code = <KEY_VOLUMEDOWN>;
187 };
188
189 &pm8916_rpm_regulators {
190 pm8916_l17: l17 {
191 regulator-min-microvolt = <2850000>;
192 regulator-max-microvolt = <2850000>;
193 };
194 };
195
196 &pm8916_vib {
197 status = "okay";
198 };
199
200 &sdhc_1 {
201 status = "okay";
202 };
203
204 &sdhc_2 {
205 status = "okay";
206
207 pinctrl-names = "default", "sleep";
208 pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
209 pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
210
211 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
212 };
213
214 &sound {
215 /*
216 * Provide widgets/pin-switches to allow enabling speaker separately.
217 * The hardware does not provide a way to disable the output via the
218 * headphone jack when the speaker is enabled.
219 */
220 model = "bq-paella";
221 widgets =
222 "Speaker", "Speaker",
223 "Headphone", "Headphones";
224 pin-switches = "Speaker";
225 audio-routing =
226 "Speaker", "Speaker Amp OUT",
227 "Speaker Amp IN", "HPH_R",
228 "Headphones", "HPH_L",
229 "Headphones", "HPH_R",
230 "AMIC1", "MIC BIAS External1",
231 "AMIC2", "MIC BIAS Internal2",
232 "AMIC3", "MIC BIAS External1";
233 aux-devs = <&speaker_amp>;
234 };
235
236 &usb {
237 status = "okay";
238 extcon = <&usb_id>, <&usb_id>;
239 };
240
241 &usb_hs_phy {
242 extcon = <&usb_id>;
243 };
244
245 &venus {
246 status = "okay";
247 };
248
249 &venus_mem {
250 status = "okay";
251 };
252
253 &wcnss {
254 status = "okay";
255 };
256
257 &wcnss_iris {
258 compatible = "qcom,wcn3620";
259 };
260
261 &wcnss_mem {
262 status = "okay";
263 };
264
265 &tlmm {
266 button_backlight_default: button-backlight-default-state {
267 pins = "gpio17";
268 function = "gpio";
269
270 drive-strength = <2>;
271 bias-disable;
272 };
273
274 camera_front_flash_default: camera-front-flash-default-state {
275 pins = "gpio49", "gpio119";
276 function = "gpio";
277 drive-strength = <2>;
278 bias-disable;
279 };
280
281 gpio_keys_default: gpio-keys-default-state {
282 pins = "gpio107";
283 function = "gpio";
284
285 drive-strength = <2>;
286 bias-pull-up;
287 };
288
289 mag_reset_default: mag-reset-default-state {
290 pins = "gpio111";
291 function = "gpio";
292
293 drive-strength = <2>;
294 bias-disable;
295 };
296
297 sdc2_cd_default: sdc2-cd-default-state {
298 pins = "gpio38";
299 function = "gpio";
300 drive-strength = <2>;
301 bias-disable;
302 };
303
304 spk_ext_pa_default: spk-ext-pa-default-state {
305 pins = "gpio114";
306 function = "gpio";
307 drive-strength = <2>;
308 bias-disable;
309 };
310
311 usb_id_default: usb-id-default-state {
312 pins = "gpio110";
313 function = "gpio";
314
315 drive-strength = <8>;
316 bias-pull-up;
317 };
318 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.