1 // SPDX-License-Identifier: BSD-3-Clause
2
3 #include <dt-bindings/iio/qcom,spmi-vadc.h>
4 #include <dt-bindings/input/input.h>
5 #include <dt-bindings/input/linux-event-codes.h>
6 #include <dt-bindings/interrupt-controller/irq.h>
7 #include <dt-bindings/spmi/spmi.h>
8
9 / {
10 thermal-zones {
11 pm6125-thermal {
12 polling-delay-passive = <100>;
13
14 thermal-sensors = <&pm6125_temp>;
15
16 trips {
17 trip0 {
18 temperature = <95000>;
19 hysteresis = <0>;
20 type = "passive";
21 };
22
23 trip1 {
24 temperature = <115000>;
25 hysteresis = <0>;
26 type = "hot";
27 };
28
29 trip2 {
30 temperature = <145000>;
31 hysteresis = <0>;
32 type = "critical";
33 };
34 };
35 };
36 };
37 };
38
39 &spmi_bus {
40 pmic@0 {
41 compatible = "qcom,pm6125", "qcom,spmi-pmic";
42 reg = <0x0 SPMI_USID>;
43 #address-cells = <1>;
44 #size-cells = <0>;
45
46 pm6125_pon: pon@800 {
47 compatible = "qcom,pm8998-pon";
48 reg = <0x800>;
49 mode-bootloader = <0x2>;
50 mode-recovery = <0x1>;
51
52 pon_pwrkey: pwrkey {
53 compatible = "qcom,pm8941-pwrkey";
54 interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
55 debounce = <15625>;
56 linux,code = <KEY_POWER>;
57 bias-pull-up;
58 status = "disabled";
59 };
60
61 pon_resin: resin {
62 compatible = "qcom,pm8941-resin";
63 interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
64 debounce = <15625>;
65 bias-pull-up;
66 status = "disabled";
67 };
68 };
69
70 pm6125_temp: temp-alarm@2400 {
71 compatible = "qcom,spmi-temp-alarm";
72 reg = <0x2400>;
73 interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
74 io-channels = <&pm6125_adc ADC5_DIE_TEMP>;
75 io-channel-names = "thermal";
76 #thermal-sensor-cells = <0>;
77 };
78
79 pm6125_adc: adc@3100 {
80 compatible = "qcom,spmi-adc5";
81 reg = <0x3100>;
82 #address-cells = <1>;
83 #size-cells = <0>;
84 interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
85 #io-channel-cells = <1>;
86
87 channel@0 {
88 reg = <ADC5_REF_GND>;
89 qcom,pre-scaling = <1 1>;
90 label = "ref_gnd";
91 };
92
93 channel@1 {
94 reg = <ADC5_1P25VREF>;
95 qcom,pre-scaling = <1 1>;
96 label = "vref_1p25";
97 };
98
99 channel@6 {
100 reg = <ADC5_DIE_TEMP>;
101 qcom,pre-scaling = <1 1>;
102 label = "die_temp";
103 };
104
105 channel@83 {
106 reg = <ADC5_VPH_PWR>;
107 qcom,pre-scaling = <1 3>;
108 label = "vph_pwr";
109 };
110
111 channel@85 {
112 reg = <ADC5_VCOIN>;
113 qcom,pre-scaling = <1 3>;
114 label = "vcoin";
115 };
116
117 channel@4c {
118 reg = <ADC5_XO_THERM_100K_PU>;
119 qcom,pre-scaling = <1 1>;
120 qcom,hw-settle-time = <200>;
121 qcom,ratiometric;
122 label = "xo_therm";
123 };
124 };
125
126 pm6125_adc_tm: adc-tm@3500 {
127 compatible = "qcom,spmi-adc-tm5";
128 reg = <0x3500>;
129 interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
130 #address-cells = <1>;
131 #size-cells = <0>;
132 #thermal-sensor-cells = <1>;
133 status = "disabled";
134 };
135
136 pm6125_rtc: rtc@6000 {
137 compatible = "qcom,pm8941-rtc";
138 reg = <0x6000>, <0x6100>;
139 reg-names = "rtc", "alarm";
140 interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
141 status = "disabled";
142 };
143
144 pm6125_gpios: gpio@c000 {
145 compatible = "qcom,pm6125-gpio", "qcom,spmi-gpio";
146 reg = <0xc000>;
147 gpio-controller;
148 gpio-ranges = <&pm6125_gpios 0 0 9>;
149 #gpio-cells = <2>;
150 interrupt-controller;
151 #interrupt-cells = <2>;
152 };
153 };
154
155 pmic@1 {
156 compatible = "qcom,pm6125", "qcom,spmi-pmic";
157 reg = <0x1 SPMI_USID>;
158 };
159 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.