1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2 /*
3 * Copyright (c) 2023, Linaro Ltd
4 *
5 * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain.
6 */
7
8 #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
9 #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
10 #include <dt-bindings/clock/qcom,qcm2290-gpucc.h>
11 #include <dt-bindings/clock/qcom,rpmcc.h>
12 #include <dt-bindings/dma/qcom-gpi.h>
13 #include <dt-bindings/firmware/qcom,scm.h>
14 #include <dt-bindings/gpio/gpio.h>
15 #include <dt-bindings/interrupt-controller/arm-gic.h>
16 #include <dt-bindings/interconnect/qcom,qcm2290.h>
17 #include <dt-bindings/interconnect/qcom,rpm-icc.h>
18 #include <dt-bindings/power/qcom-rpmpd.h>
19
20 / {
21 interrupt-parent = <&intc>;
22
23 #address-cells = <2>;
24 #size-cells = <2>;
25
26 chosen { };
27
28 clocks {
29 xo_board: xo-board {
30 compatible = "fixed-clock";
31 #clock-cells = <0>;
32 };
33
34 sleep_clk: sleep-clk {
35 compatible = "fixed-clock";
36 clock-frequency = <32764>;
37 #clock-cells = <0>;
38 };
39 };
40
41 cpus {
42 #address-cells = <2>;
43 #size-cells = <0>;
44
45 CPU0: cpu@0 {
46 device_type = "cpu";
47 compatible = "arm,cortex-a53";
48 reg = <0x0 0x0>;
49 clocks = <&cpufreq_hw 0>;
50 capacity-dmips-mhz = <1024>;
51 dynamic-power-coefficient = <100>;
52 enable-method = "psci";
53 next-level-cache = <&L2_0>;
54 qcom,freq-domain = <&cpufreq_hw 0>;
55 power-domains = <&CPU_PD0>;
56 power-domain-names = "psci";
57 L2_0: l2-cache {
58 compatible = "cache";
59 cache-level = <2>;
60 cache-unified;
61 };
62 };
63
64 CPU1: cpu@1 {
65 device_type = "cpu";
66 compatible = "arm,cortex-a53";
67 reg = <0x0 0x1>;
68 clocks = <&cpufreq_hw 0>;
69 capacity-dmips-mhz = <1024>;
70 dynamic-power-coefficient = <100>;
71 enable-method = "psci";
72 next-level-cache = <&L2_0>;
73 qcom,freq-domain = <&cpufreq_hw 0>;
74 power-domains = <&CPU_PD1>;
75 power-domain-names = "psci";
76 };
77
78 CPU2: cpu@2 {
79 device_type = "cpu";
80 compatible = "arm,cortex-a53";
81 reg = <0x0 0x2>;
82 clocks = <&cpufreq_hw 0>;
83 capacity-dmips-mhz = <1024>;
84 dynamic-power-coefficient = <100>;
85 enable-method = "psci";
86 next-level-cache = <&L2_0>;
87 qcom,freq-domain = <&cpufreq_hw 0>;
88 power-domains = <&CPU_PD2>;
89 power-domain-names = "psci";
90 };
91
92 CPU3: cpu@3 {
93 device_type = "cpu";
94 compatible = "arm,cortex-a53";
95 reg = <0x0 0x3>;
96 clocks = <&cpufreq_hw 0>;
97 capacity-dmips-mhz = <1024>;
98 dynamic-power-coefficient = <100>;
99 enable-method = "psci";
100 next-level-cache = <&L2_0>;
101 qcom,freq-domain = <&cpufreq_hw 0>;
102 power-domains = <&CPU_PD3>;
103 power-domain-names = "psci";
104 };
105
106 cpu-map {
107 cluster0 {
108 core0 {
109 cpu = <&CPU0>;
110 };
111
112 core1 {
113 cpu = <&CPU1>;
114 };
115
116 core2 {
117 cpu = <&CPU2>;
118 };
119
120 core3 {
121 cpu = <&CPU3>;
122 };
123 };
124 };
125
126 domain-idle-states {
127 CLUSTER_SLEEP: cluster-sleep-0 {
128 compatible = "domain-idle-state";
129 arm,psci-suspend-param = <0x41000043>;
130 entry-latency-us = <800>;
131 exit-latency-us = <2118>;
132 min-residency-us = <7376>;
133 };
134 };
135
136 idle-states {
137 entry-method = "psci";
138
139 CPU_SLEEP: cpu-sleep-0 {
140 compatible = "arm,idle-state";
141 idle-state-name = "power-collapse";
142 arm,psci-suspend-param = <0x40000003>;
143 entry-latency-us = <290>;
144 exit-latency-us = <376>;
145 min-residency-us = <1182>;
146 local-timer-stop;
147 };
148 };
149 };
150
151 firmware {
152 scm: scm {
153 compatible = "qcom,scm-qcm2290", "qcom,scm";
154 clocks = <&rpmcc RPM_SMD_CE1_CLK>;
155 clock-names = "core";
156 #reset-cells = <1>;
157 interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG
158 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
159 };
160 };
161
162 memory@40000000 {
163 device_type = "memory";
164 /* We expect the bootloader to fill in the size */
165 reg = <0 0x40000000 0 0>;
166 };
167
168 pmu {
169 compatible = "arm,cortex-a53-pmu";
170 interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
171 };
172
173 psci {
174 compatible = "arm,psci-1.0";
175 method = "smc";
176
177 CPU_PD0: power-domain-cpu0 {
178 #power-domain-cells = <0>;
179 power-domains = <&CLUSTER_PD>;
180 domain-idle-states = <&CPU_SLEEP>;
181 };
182
183 CPU_PD1: power-domain-cpu1 {
184 #power-domain-cells = <0>;
185 power-domains = <&CLUSTER_PD>;
186 domain-idle-states = <&CPU_SLEEP>;
187 };
188
189 CPU_PD2: power-domain-cpu2 {
190 #power-domain-cells = <0>;
191 power-domains = <&CLUSTER_PD>;
192 domain-idle-states = <&CPU_SLEEP>;
193 };
194
195 CPU_PD3: power-domain-cpu3 {
196 #power-domain-cells = <0>;
197 power-domains = <&CLUSTER_PD>;
198 domain-idle-states = <&CPU_SLEEP>;
199 };
200
201 CLUSTER_PD: power-domain-cpu-cluster {
202 #power-domain-cells = <0>;
203 power-domains = <&mpm>;
204 domain-idle-states = <&CLUSTER_SLEEP>;
205 };
206 };
207
208 rpm: remoteproc {
209 compatible = "qcom,qcm2290-rpm-proc", "qcom,rpm-proc";
210
211 glink-edge {
212 compatible = "qcom,glink-rpm";
213 interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
214 qcom,rpm-msg-ram = <&rpm_msg_ram>;
215 mboxes = <&apcs_glb 0>;
216
217 rpm_requests: rpm-requests {
218 compatible = "qcom,rpm-qcm2290";
219 qcom,glink-channels = "rpm_requests";
220
221 rpmcc: clock-controller {
222 compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc";
223 clocks = <&xo_board>;
224 clock-names = "xo";
225 #clock-cells = <1>;
226 };
227
228 rpmpd: power-controller {
229 compatible = "qcom,qcm2290-rpmpd";
230 #power-domain-cells = <1>;
231 operating-points-v2 = <&rpmpd_opp_table>;
232
233 rpmpd_opp_table: opp-table {
234 compatible = "operating-points-v2";
235
236 rpmpd_opp_min_svs: opp1 {
237 opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
238 };
239
240 rpmpd_opp_low_svs: opp2 {
241 opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
242 };
243
244 rpmpd_opp_svs: opp3 {
245 opp-level = <RPM_SMD_LEVEL_SVS>;
246 };
247
248 rpmpd_opp_svs_plus: opp4 {
249 opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
250 };
251
252 rpmpd_opp_nom: opp5 {
253 opp-level = <RPM_SMD_LEVEL_NOM>;
254 };
255
256 rpmpd_opp_nom_plus: opp6 {
257 opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
258 };
259
260 rpmpd_opp_turbo: opp7 {
261 opp-level = <RPM_SMD_LEVEL_TURBO>;
262 };
263
264 rpmpd_opp_turbo_plus: opp8 {
265 opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
266 };
267 };
268 };
269 };
270 };
271
272 mpm: interrupt-controller {
273 compatible = "qcom,mpm";
274 qcom,rpm-msg-ram = <&apss_mpm>;
275 interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
276 mboxes = <&apcs_glb 1>;
277 interrupt-controller;
278 #interrupt-cells = <2>;
279 #power-domain-cells = <0>;
280 interrupt-parent = <&intc>;
281 qcom,mpm-pin-count = <96>;
282 qcom,mpm-pin-map = <2 275>, /* TSENS0 uplow */
283 <5 296>, /* Soundwire master_irq */
284 <12 422>, /* DWC3 ss_phy_irq */
285 <24 79>, /* Soundwire wake_irq */
286 <86 183>, /* MPM wake, SPMI */
287 <90 260>; /* QUSB2_PHY DP+DM */
288 };
289 };
290
291 reserved_memory: reserved-memory {
292 #address-cells = <2>;
293 #size-cells = <2>;
294 ranges;
295
296 hyp_mem: hyp@45700000 {
297 reg = <0x0 0x45700000 0x0 0x600000>;
298 no-map;
299 };
300
301 xbl_aop_mem: xbl-aop@45e00000 {
302 reg = <0x0 0x45e00000 0x0 0x140000>;
303 no-map;
304 };
305
306 sec_apps_mem: sec-apps@45fff000 {
307 reg = <0x0 0x45fff000 0x0 0x1000>;
308 no-map;
309 };
310
311 smem_mem: smem@46000000 {
312 compatible = "qcom,smem";
313 reg = <0x0 0x46000000 0x0 0x200000>;
314 no-map;
315
316 hwlocks = <&tcsr_mutex 3>;
317 qcom,rpm-msg-ram = <&rpm_msg_ram>;
318 };
319
320 pil_modem_mem: modem@4ab00000 {
321 reg = <0x0 0x4ab00000 0x0 0x6900000>;
322 no-map;
323 };
324
325 pil_video_mem: video@51400000 {
326 reg = <0x0 0x51400000 0x0 0x500000>;
327 no-map;
328 };
329
330 wlan_msa_mem: wlan-msa@51900000 {
331 reg = <0x0 0x51900000 0x0 0x100000>;
332 no-map;
333 };
334
335 pil_adsp_mem: adsp@51a00000 {
336 reg = <0x0 0x51a00000 0x0 0x1c00000>;
337 no-map;
338 };
339
340 pil_ipa_fw_mem: ipa-fw@53600000 {
341 reg = <0x0 0x53600000 0x0 0x10000>;
342 no-map;
343 };
344
345 pil_ipa_gsi_mem: ipa-gsi@53610000 {
346 reg = <0x0 0x53610000 0x0 0x5000>;
347 no-map;
348 };
349
350 pil_gpu_mem: zap@53615000 {
351 compatible = "shared-dma-pool";
352 reg = <0x0 0x53615000 0x0 0x2000>;
353 no-map;
354 };
355
356 cont_splash_memory: framebuffer@5c000000 {
357 reg = <0x0 0x5c000000 0x0 0x00f00000>;
358 no-map;
359 };
360
361 dfps_data_memory: dpfs-data@5cf00000 {
362 reg = <0x0 0x5cf00000 0x0 0x0100000>;
363 no-map;
364 };
365
366 removed_mem: reserved@60000000 {
367 reg = <0x0 0x60000000 0x0 0x3900000>;
368 no-map;
369 };
370
371 rmtfs_mem: memory@89b01000 {
372 compatible = "qcom,rmtfs-mem";
373 reg = <0x0 0x89b01000 0x0 0x200000>;
374 no-map;
375
376 qcom,client-id = <1>;
377 qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>;
378 };
379 };
380
381 smp2p-adsp {
382 compatible = "qcom,smp2p";
383 qcom,smem = <443>, <429>;
384
385 interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>;
386
387 mboxes = <&apcs_glb 10>;
388
389 qcom,local-pid = <0>;
390 qcom,remote-pid = <2>;
391
392 adsp_smp2p_out: master-kernel {
393 qcom,entry-name = "master-kernel";
394 #qcom,smem-state-cells = <1>;
395 };
396
397 adsp_smp2p_in: slave-kernel {
398 qcom,entry-name = "slave-kernel";
399 interrupt-controller;
400 #interrupt-cells = <2>;
401 };
402 };
403
404 smp2p-mpss {
405 compatible = "qcom,smp2p";
406 qcom,smem = <435>, <428>;
407
408 interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
409
410 mboxes = <&apcs_glb 14>;
411
412 qcom,local-pid = <0>;
413 qcom,remote-pid = <1>;
414
415 modem_smp2p_out: master-kernel {
416 qcom,entry-name = "master-kernel";
417 #qcom,smem-state-cells = <1>;
418 };
419
420 modem_smp2p_in: slave-kernel {
421 qcom,entry-name = "slave-kernel";
422 interrupt-controller;
423 #interrupt-cells = <2>;
424 };
425
426 wlan_smp2p_in: wlan-wpss-to-ap {
427 qcom,entry-name = "wlan";
428 interrupt-controller;
429 #interrupt-cells = <2>;
430 };
431 };
432
433 soc: soc@0 {
434 compatible = "simple-bus";
435 #address-cells = <2>;
436 #size-cells = <2>;
437 ranges = <0 0 0 0 0x10 0>;
438 dma-ranges = <0 0 0 0 0x10 0>;
439
440 tcsr_mutex: hwlock@340000 {
441 compatible = "qcom,tcsr-mutex";
442 reg = <0x0 0x00340000 0x0 0x20000>;
443 #hwlock-cells = <1>;
444 };
445
446 tcsr_regs: syscon@3c0000 {
447 compatible = "qcom,qcm2290-tcsr", "syscon";
448 reg = <0x0 0x003c0000 0x0 0x40000>;
449 };
450
451 tlmm: pinctrl@500000 {
452 compatible = "qcom,qcm2290-tlmm";
453 reg = <0x0 0x00500000 0x0 0x300000>;
454 interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
455 gpio-controller;
456 gpio-ranges = <&tlmm 0 0 127>;
457 wakeup-parent = <&mpm>;
458 #gpio-cells = <2>;
459 interrupt-controller;
460 #interrupt-cells = <2>;
461
462 qup_i2c0_default: qup-i2c0-default-state {
463 pins = "gpio0", "gpio1";
464 function = "qup0";
465 drive-strength = <2>;
466 bias-pull-up;
467 };
468
469 qup_i2c1_default: qup-i2c1-default-state {
470 pins = "gpio4", "gpio5";
471 function = "qup1";
472 drive-strength = <2>;
473 bias-pull-up;
474 };
475
476 qup_i2c2_default: qup-i2c2-default-state {
477 pins = "gpio6", "gpio7";
478 function = "qup2";
479 drive-strength = <2>;
480 bias-pull-up;
481 };
482
483 qup_i2c3_default: qup-i2c3-default-state {
484 pins = "gpio8", "gpio9";
485 function = "qup3";
486 drive-strength = <2>;
487 bias-pull-up;
488 };
489
490 qup_i2c4_default: qup-i2c4-default-state {
491 pins = "gpio12", "gpio13";
492 function = "qup4";
493 drive-strength = <2>;
494 bias-pull-up;
495 };
496
497 qup_i2c5_default: qup-i2c5-default-state {
498 pins = "gpio14", "gpio15";
499 function = "qup5";
500 drive-strength = <2>;
501 bias-pull-up;
502 };
503
504 qup_spi0_default: qup-spi0-default-state {
505 pins = "gpio0", "gpio1","gpio2", "gpio3";
506 function = "qup0";
507 drive-strength = <2>;
508 bias-pull-up;
509 };
510
511 qup_spi1_default: qup-spi1-default-state {
512 pins = "gpio4", "gpio5", "gpio69", "gpio70";
513 function = "qup1";
514 drive-strength = <2>;
515 bias-pull-up;
516 };
517
518 qup_spi2_default: qup-spi2-default-state {
519 pins = "gpio6", "gpio7", "gpio71", "gpio80";
520 function = "qup2";
521 drive-strength = <2>;
522 bias-pull-up;
523 };
524
525 qup_spi3_default: qup-spi3-default-state {
526 pins = "gpio8", "gpio9", "gpio10", "gpio11";
527 function = "qup3";
528 drive-strength = <2>;
529 bias-pull-up;
530 };
531
532 qup_spi4_default: qup-spi4-default-state {
533 pins = "gpio12", "gpio13", "gpio96", "gpio97";
534 function = "qup4";
535 drive-strength = <2>;
536 bias-pull-up;
537 };
538
539 qup_spi5_default: qup-spi5-default-state {
540 pins = "gpio14", "gpio15", "gpio16", "gpio17";
541 function = "qup5";
542 drive-strength = <2>;
543 bias-pull-up;
544 };
545
546 qup_uart0_default: qup-uart0-default-state {
547 pins = "gpio0", "gpio1", "gpio2", "gpio3";
548 function = "qup0";
549 drive-strength = <2>;
550 bias-disable;
551 };
552
553 qup_uart4_default: qup-uart4-default-state {
554 pins = "gpio12", "gpio13";
555 function = "qup4";
556 drive-strength = <2>;
557 bias-disable;
558 };
559
560 sdc1_state_on: sdc1-on-state {
561 clk-pins {
562 pins = "sdc1_clk";
563 drive-strength = <16>;
564 bias-disable;
565 };
566
567 cmd-pins {
568 pins = "sdc1_cmd";
569 drive-strength = <10>;
570 bias-pull-up;
571 };
572
573 data-pins {
574 pins = "sdc1_data";
575 drive-strength = <10>;
576 bias-pull-up;
577 };
578
579 rclk-pins {
580 pins = "sdc1_rclk";
581 bias-pull-down;
582 };
583 };
584
585 sdc1_state_off: sdc1-off-state {
586 clk-pins {
587 pins = "sdc1_clk";
588 drive-strength = <2>;
589 bias-disable;
590 };
591
592 cmd-pins {
593 pins = "sdc1_cmd";
594 drive-strength = <2>;
595 bias-pull-up;
596 };
597
598 data-pins {
599 pins = "sdc1_data";
600 drive-strength = <2>;
601 bias-pull-up;
602 };
603
604 rclk-pins {
605 pins = "sdc1_rclk";
606 bias-pull-down;
607 };
608 };
609
610 sdc2_state_on: sdc2-on-state {
611 clk-pins {
612 pins = "sdc2_clk";
613 drive-strength = <16>;
614 bias-disable;
615 };
616
617 cmd-pins {
618 pins = "sdc2_cmd";
619 drive-strength = <10>;
620 bias-pull-up;
621 };
622
623 data-pins {
624 pins = "sdc2_data";
625 drive-strength = <10>;
626 bias-pull-up;
627 };
628 };
629
630 sdc2_state_off: sdc2-off-state {
631 clk-pins {
632 pins = "sdc2_clk";
633 drive-strength = <2>;
634 bias-disable;
635 };
636
637 cmd-pins {
638 pins = "sdc2_cmd";
639 drive-strength = <2>;
640 bias-pull-up;
641 };
642
643 data-pins {
644 pins = "sdc2_data";
645 drive-strength = <2>;
646 bias-pull-up;
647 };
648 };
649 };
650
651 gcc: clock-controller@1400000 {
652 compatible = "qcom,gcc-qcm2290";
653 reg = <0x0 0x01400000 0x0 0x1f0000>;
654 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
655 clock-names = "bi_tcxo", "sleep_clk";
656 #clock-cells = <1>;
657 #reset-cells = <1>;
658 #power-domain-cells = <1>;
659 };
660
661 usb_hsphy: phy@1613000 {
662 compatible = "qcom,qcm2290-qusb2-phy";
663 reg = <0x0 0x01613000 0x0 0x180>;
664
665 clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
666 <&rpmcc RPM_SMD_XO_CLK_SRC>;
667 clock-names = "cfg_ahb", "ref";
668
669 resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
670 nvmem-cells = <&qusb2_hstx_trim>;
671 #phy-cells = <0>;
672
673 status = "disabled";
674 };
675
676 usb_qmpphy: phy@1615000 {
677 compatible = "qcom,qcm2290-qmp-usb3-phy";
678 reg = <0x0 0x01615000 0x0 0x1000>;
679
680 clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
681 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
682 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
683 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
684 clock-names = "cfg_ahb",
685 "ref",
686 "com_aux",
687 "pipe";
688
689 resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
690 <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
691 reset-names = "phy",
692 "phy_phy";
693
694 #clock-cells = <0>;
695 clock-output-names = "usb3_phy_pipe_clk_src";
696
697 #phy-cells = <0>;
698 orientation-switch;
699
700 qcom,tcsr-reg = <&tcsr_regs 0xb244>;
701
702 status = "disabled";
703
704 ports {
705 #address-cells = <1>;
706 #size-cells = <0>;
707
708 port@0 {
709 reg = <0>;
710
711 usb_qmpphy_out: endpoint {
712 };
713 };
714
715 port@1 {
716 reg = <1>;
717
718 usb_qmpphy_usb_ss_in: endpoint {
719 remote-endpoint = <&usb_dwc3_ss>;
720 };
721 };
722 };
723 };
724
725 system_noc: interconnect@1880000 {
726 compatible = "qcom,qcm2290-snoc";
727 reg = <0x0 0x01880000 0x0 0x60200>;
728 #interconnect-cells = <2>;
729
730 qup_virt: interconnect-qup {
731 compatible = "qcom,qcm2290-qup-virt";
732 #interconnect-cells = <2>;
733 };
734
735 mmnrt_virt: interconnect-mmnrt {
736 compatible = "qcom,qcm2290-mmnrt-virt";
737 #interconnect-cells = <2>;
738 };
739
740 mmrt_virt: interconnect-mmrt {
741 compatible = "qcom,qcm2290-mmrt-virt";
742 #interconnect-cells = <2>;
743 };
744 };
745
746 config_noc: interconnect@1900000 {
747 compatible = "qcom,qcm2290-cnoc";
748 reg = <0x0 0x01900000 0x0 0x8200>;
749 #interconnect-cells = <2>;
750 };
751
752 qfprom@1b44000 {
753 compatible = "qcom,qcm2290-qfprom", "qcom,qfprom";
754 reg = <0x0 0x01b44000 0x0 0x3000>;
755 #address-cells = <1>;
756 #size-cells = <1>;
757
758 qusb2_hstx_trim: hstx-trim@25b {
759 reg = <0x25b 0x1>;
760 bits = <1 4>;
761 };
762
763 gpu_speed_bin: gpu-speed-bin@2006 {
764 reg = <0x2006 0x2>;
765 bits = <5 8>;
766 };
767 };
768
769 pmu@1b8e300 {
770 compatible = "qcom,qcm2290-cpu-bwmon", "qcom,sdm845-bwmon";
771 reg = <0x0 0x01b8e300 0x0 0x600>;
772 interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
773
774 operating-points-v2 = <&cpu_bwmon_opp_table>;
775 interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
776 &bimc SLAVE_EBI1 RPM_ACTIVE_TAG>;
777
778 cpu_bwmon_opp_table: opp-table {
779 compatible = "operating-points-v2";
780
781 opp-0 {
782 opp-peak-kBps = <(200 * 4 * 1000)>;
783 };
784
785 opp-1 {
786 opp-peak-kBps = <(300 * 4 * 1000)>;
787 };
788
789 opp-2 {
790 opp-peak-kBps = <(451 * 4 * 1000)>;
791 };
792
793 opp-3 {
794 opp-peak-kBps = <(547 * 4 * 1000)>;
795 };
796
797 opp-4 {
798 opp-peak-kBps = <(681 * 4 * 1000)>;
799 };
800
801 opp-5 {
802 opp-peak-kBps = <(768 * 4 * 1000)>;
803 };
804
805 opp-6 {
806 opp-peak-kBps = <(1017 * 4 * 1000)>;
807 };
808
809 opp-7 {
810 opp-peak-kBps = <(1353 * 4 * 1000)>;
811 };
812
813 opp-8 {
814 opp-peak-kBps = <(1555 * 4 * 1000)>;
815 };
816
817 opp-9 {
818 opp-peak-kBps = <(1804 * 4 * 1000)>;
819 };
820 };
821 };
822
823 spmi_bus: spmi@1c40000 {
824 compatible = "qcom,spmi-pmic-arb";
825 reg = <0x0 0x01c40000 0x0 0x1100>,
826 <0x0 0x01e00000 0x0 0x2000000>,
827 <0x0 0x03e00000 0x0 0x100000>,
828 <0x0 0x03f00000 0x0 0xa0000>,
829 <0x0 0x01c0a000 0x0 0x26000>;
830 reg-names = "core",
831 "chnls",
832 "obsrvr",
833 "intr",
834 "cnfg";
835 interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>;
836 interrupt-names = "periph_irq";
837 qcom,ee = <0>;
838 qcom,channel = <0>;
839 #address-cells = <2>;
840 #size-cells = <0>;
841 interrupt-controller;
842 #interrupt-cells = <4>;
843 };
844
845 tsens0: thermal-sensor@4411000 {
846 compatible = "qcom,qcm2290-tsens", "qcom,tsens-v2";
847 reg = <0x0 0x04411000 0x0 0x1ff>,
848 <0x0 0x04410000 0x0 0x8>;
849 #qcom,sensors = <10>;
850 interrupts-extended = <&mpm 2 IRQ_TYPE_LEVEL_HIGH>,
851 <&intc GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
852 interrupt-names = "uplow", "critical";
853 #thermal-sensor-cells = <1>;
854 };
855
856 rng: rng@4453000 {
857 compatible = "qcom,prng-ee";
858 reg = <0x0 0x04453000 0x0 0x1000>;
859 clocks = <&rpmcc RPM_SMD_HWKM_CLK>;
860 clock-names = "core";
861 };
862
863 bimc: interconnect@4480000 {
864 compatible = "qcom,qcm2290-bimc";
865 reg = <0x0 0x04480000 0x0 0x80000>;
866 #interconnect-cells = <2>;
867 };
868
869 rpm_msg_ram: sram@45f0000 {
870 compatible = "qcom,rpm-msg-ram", "mmio-sram";
871 reg = <0x0 0x045f0000 0x0 0x7000>;
872 #address-cells = <1>;
873 #size-cells = <1>;
874 ranges = <0 0x0 0x045f0000 0x7000>;
875
876 apss_mpm: sram@1b8 {
877 reg = <0x1b8 0x48>;
878 };
879 };
880
881 sram@4690000 {
882 compatible = "qcom,rpm-stats";
883 reg = <0x0 0x04690000 0x0 0x10000>;
884 };
885
886 sdhc_1: mmc@4744000 {
887 compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5";
888 reg = <0x0 0x04744000 0x0 0x1000>,
889 <0x0 0x04745000 0x0 0x1000>,
890 <0x0 0x04748000 0x0 0x8000>;
891 reg-names = "hc",
892 "cqhci",
893 "ice";
894
895 interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
896 <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
897 interrupt-names = "hc_irq", "pwr_irq";
898
899 clocks = <&gcc GCC_SDCC1_AHB_CLK>,
900 <&gcc GCC_SDCC1_APPS_CLK>,
901 <&rpmcc RPM_SMD_XO_CLK_SRC>,
902 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
903 clock-names = "iface",
904 "core",
905 "xo",
906 "ice";
907
908 resets = <&gcc GCC_SDCC1_BCR>;
909
910 power-domains = <&rpmpd QCM2290_VDDCX>;
911 operating-points-v2 = <&sdhc1_opp_table>;
912 iommus = <&apps_smmu 0xc0 0x0>;
913 interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG
914 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
915 <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
916 &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>;
917 interconnect-names = "sdhc-ddr",
918 "cpu-sdhc";
919
920 qcom,dll-config = <0x000f642c>;
921 qcom,ddr-config = <0x80040868>;
922 bus-width = <8>;
923
924 status = "disabled";
925
926 sdhc1_opp_table: opp-table {
927 compatible = "operating-points-v2";
928
929 opp-100000000 {
930 opp-hz = /bits/ 64 <100000000>;
931 required-opps = <&rpmpd_opp_low_svs>;
932 opp-peak-kBps = <250000 133320>;
933 opp-avg-kBps = <102400 65000>;
934 };
935
936 opp-192000000 {
937 opp-hz = /bits/ 64 <192000000>;
938 required-opps = <&rpmpd_opp_low_svs>;
939 opp-peak-kBps = <800000 300000>;
940 opp-avg-kBps = <204800 200000>;
941 };
942
943 opp-384000000 {
944 opp-hz = /bits/ 64 <384000000>;
945 required-opps = <&rpmpd_opp_svs_plus>;
946 opp-peak-kBps = <800000 300000>;
947 opp-avg-kBps = <204800 200000>;
948 };
949 };
950 };
951
952 sdhc_2: mmc@4784000 {
953 compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5";
954 reg = <0x0 0x04784000 0x0 0x1000>;
955 reg-names = "hc";
956
957 interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
958 <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
959 interrupt-names = "hc_irq", "pwr_irq";
960
961 clocks = <&gcc GCC_SDCC2_AHB_CLK>,
962 <&gcc GCC_SDCC2_APPS_CLK>,
963 <&rpmcc RPM_SMD_XO_CLK_SRC>;
964 clock-names = "iface",
965 "core",
966 "xo";
967
968 resets = <&gcc GCC_SDCC2_BCR>;
969
970 power-domains = <&rpmpd QCM2290_VDDCX>;
971 operating-points-v2 = <&sdhc2_opp_table>;
972 iommus = <&apps_smmu 0xa0 0x0>;
973 interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG
974 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
975 <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
976 &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>;
977 interconnect-names = "sdhc-ddr",
978 "cpu-sdhc";
979
980 qcom,dll-config = <0x0007642c>;
981 qcom,ddr-config = <0x80040868>;
982 bus-width = <4>;
983
984 status = "disabled";
985
986 sdhc2_opp_table: opp-table {
987 compatible = "operating-points-v2";
988
989 opp-100000000 {
990 opp-hz = /bits/ 64 <100000000>;
991 required-opps = <&rpmpd_opp_low_svs>;
992 opp-peak-kBps = <250000 133320>;
993 opp-avg-kBps = <261438 150000>;
994 };
995
996 opp-202000000 {
997 opp-hz = /bits/ 64 <202000000>;
998 required-opps = <&rpmpd_opp_svs_plus>;
999 opp-peak-kBps = <800000 300000>;
1000 opp-avg-kBps = <261438 300000>;
1001 };
1002 };
1003 };
1004
1005 gpi_dma0: dma-controller@4a00000 {
1006 compatible = "qcom,qcm2290-gpi-dma", "qcom,sm6350-gpi-dma";
1007 reg = <0x0 0x04a00000 0x0 0x60000>;
1008 interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
1009 <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
1010 <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
1011 <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
1012 <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
1013 <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
1014 <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
1015 <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
1016 <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
1017 <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
1018 dma-channels = <10>;
1019 dma-channel-mask = <0x1f>;
1020 iommus = <&apps_smmu 0xf6 0x0>;
1021 #dma-cells = <3>;
1022 status = "disabled";
1023 };
1024
1025 qupv3_id_0: geniqup@4ac0000 {
1026 compatible = "qcom,geni-se-qup";
1027 reg = <0x0 0x04ac0000 0x0 0x2000>;
1028 clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
1029 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
1030 clock-names = "m-ahb", "s-ahb";
1031 iommus = <&apps_smmu 0xe3 0x0>;
1032 #address-cells = <2>;
1033 #size-cells = <2>;
1034 ranges;
1035 status = "disabled";
1036
1037 i2c0: i2c@4a80000 {
1038 compatible = "qcom,geni-i2c";
1039 reg = <0x0 0x04a80000 0x0 0x4000>;
1040 interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
1041 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
1042 clock-names = "se";
1043 pinctrl-0 = <&qup_i2c0_default>;
1044 pinctrl-names = "default";
1045 dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
1046 <&gpi_dma0 1 0 QCOM_GPI_I2C>;
1047 dma-names = "tx", "rx";
1048 interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
1049 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
1050 <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
1051 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
1052 <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
1053 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
1054 interconnect-names = "qup-core",
1055 "qup-config",
1056 "qup-memory";
1057 #address-cells = <1>;
1058 #size-cells = <0>;
1059 status = "disabled";
1060 };
1061
1062 spi0: spi@4a80000 {
1063 compatible = "qcom,geni-spi";
1064 reg = <0x0 0x04a80000 0x0 0x4000>;
1065 interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
1066 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
1067 clock-names = "se";
1068 pinctrl-0 = <&qup_spi0_default>;
1069 pinctrl-names = "default";
1070 dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
1071 <&gpi_dma0 1 0 QCOM_GPI_SPI>;
1072 dma-names = "tx", "rx";
1073 interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
1074 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
1075 <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
1076 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
1077 interconnect-names = "qup-core",
1078 "qup-config";
1079 #address-cells = <1>;
1080 #size-cells = <0>;
1081 status = "disabled";
1082 };
1083
1084 uart0: serial@4a80000 {
1085 compatible = "qcom,geni-uart";
1086 reg = <0x0 0x04a80000 0x0 0x4000>;
1087 interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
1088 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
1089 clock-names = "se";
1090 pinctrl-0 = <&qup_uart0_default>;
1091 pinctrl-names = "default";
1092 interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
1093 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
1094 <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
1095 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
1096 interconnect-names = "qup-core",
1097 "qup-config";
1098 status = "disabled";
1099 };
1100
1101 i2c1: i2c@4a84000 {
1102 compatible = "qcom,geni-i2c";
1103 reg = <0x0 0x04a84000 0x0 0x4000>;
1104 interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
1105 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
1106 clock-names = "se";
1107 pinctrl-0 = <&qup_i2c1_default>;
1108 pinctrl-names = "default";
1109 dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
1110 <&gpi_dma0 1 1 QCOM_GPI_I2C>;
1111 dma-names = "tx", "rx";
1112 interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
1113 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
1114 <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
1115 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
1116 <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
1117 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
1118 interconnect-names = "qup-core",
1119 "qup-config",
1120 "qup-memory";
1121 #address-cells = <1>;
1122 #size-cells = <0>;
1123 status = "disabled";
1124 };
1125
1126 spi1: spi@4a84000 {
1127 compatible = "qcom,geni-spi";
1128 reg = <0x0 0x04a84000 0x0 0x4000>;
1129 interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
1130 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
1131 clock-names = "se";
1132 pinctrl-0 = <&qup_spi1_default>;
1133 pinctrl-names = "default";
1134 dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
1135 <&gpi_dma0 1 1 QCOM_GPI_SPI>;
1136 dma-names = "tx", "rx";
1137 interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
1138 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
1139 <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
1140 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
1141 interconnect-names = "qup-core",
1142 "qup-config";
1143 #address-cells = <1>;
1144 #size-cells = <0>;
1145 status = "disabled";
1146 };
1147
1148 i2c2: i2c@4a88000 {
1149 compatible = "qcom,geni-i2c";
1150 reg = <0x0 0x04a88000 0x0 0x4000>;
1151 interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
1152 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
1153 clock-names = "se";
1154 pinctrl-0 = <&qup_i2c2_default>;
1155 pinctrl-names = "default";
1156 dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
1157 <&gpi_dma0 1 2 QCOM_GPI_I2C>;
1158 dma-names = "tx", "rx";
1159 interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
1160 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
1161 <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
1162 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
1163 <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
1164 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
1165 interconnect-names = "qup-core",
1166 "qup-config",
1167 "qup-memory";
1168 #address-cells = <1>;
1169 #size-cells = <0>;
1170 status = "disabled";
1171 };
1172
1173 spi2: spi@4a88000 {
1174 compatible = "qcom,geni-spi";
1175 reg = <0x0 0x04a88000 0x0 0x4000>;
1176 interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
1177 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
1178 clock-names = "se";
1179 pinctrl-0 = <&qup_spi2_default>;
1180 pinctrl-names = "default";
1181 dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
1182 <&gpi_dma0 1 2 QCOM_GPI_SPI>;
1183 dma-names = "tx", "rx";
1184 interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
1185 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
1186 <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
1187 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
1188 interconnect-names = "qup-core",
1189 "qup-config";
1190 #address-cells = <1>;
1191 #size-cells = <0>;
1192 status = "disabled";
1193 };
1194
1195 i2c3: i2c@4a8c000 {
1196 compatible = "qcom,geni-i2c";
1197 reg = <0x0 0x04a8c000 0x0 0x4000>;
1198 interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
1199 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
1200 clock-names = "se";
1201 pinctrl-0 = <&qup_i2c3_default>;
1202 pinctrl-names = "default";
1203 dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
1204 <&gpi_dma0 1 3 QCOM_GPI_I2C>;
1205 dma-names = "tx", "rx";
1206 interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
1207 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
1208 <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
1209 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
1210 <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
1211 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
1212 interconnect-names = "qup-core",
1213 "qup-config",
1214 "qup-memory";
1215 #address-cells = <1>;
1216 #size-cells = <0>;
1217 status = "disabled";
1218 };
1219
1220 spi3: spi@4a8c000 {
1221 compatible = "qcom,geni-spi";
1222 reg = <0x0 0x04a8c000 0x0 0x4000>;
1223 interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
1224 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
1225 clock-names = "se";
1226 pinctrl-0 = <&qup_spi3_default>;
1227 pinctrl-names = "default";
1228 dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
1229 <&gpi_dma0 1 3 QCOM_GPI_SPI>;
1230 dma-names = "tx", "rx";
1231 interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
1232 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
1233 <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
1234 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
1235 interconnect-names = "qup-core",
1236 "qup-config";
1237 #address-cells = <1>;
1238 #size-cells = <0>;
1239 status = "disabled";
1240 };
1241
1242 i2c4: i2c@4a90000 {
1243 compatible = "qcom,geni-i2c";
1244 reg = <0x0 0x04a90000 0x0 0x4000>;
1245 interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
1246 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
1247 clock-names = "se";
1248 pinctrl-0 = <&qup_i2c4_default>;
1249 pinctrl-names = "default";
1250 dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
1251 <&gpi_dma0 1 4 QCOM_GPI_I2C>;
1252 dma-names = "tx", "rx";
1253 interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
1254 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
1255 <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
1256 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
1257 <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
1258 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
1259 interconnect-names = "qup-core",
1260 "qup-config",
1261 "qup-memory";
1262 #address-cells = <1>;
1263 #size-cells = <0>;
1264 status = "disabled";
1265 };
1266
1267 spi4: spi@4a90000 {
1268 compatible = "qcom,geni-spi";
1269 reg = <0x0 0x04a90000 0x0 0x4000>;
1270 interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
1271 clock-names = "se";
1272 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
1273 pinctrl-names = "default";
1274 pinctrl-0 = <&qup_spi4_default>;
1275 dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
1276 <&gpi_dma0 1 4 QCOM_GPI_SPI>;
1277 dma-names = "tx", "rx";
1278 interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
1279 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
1280 <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
1281 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
1282 interconnect-names = "qup-core",
1283 "qup-config";
1284 #address-cells = <1>;
1285 #size-cells = <0>;
1286 status = "disabled";
1287 };
1288
1289 uart4: serial@4a90000 {
1290 compatible = "qcom,geni-uart";
1291 reg = <0x0 0x04a90000 0x0 0x4000>;
1292 interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
1293 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
1294 clock-names = "se";
1295 pinctrl-0 = <&qup_uart4_default>;
1296 pinctrl-names = "default";
1297 interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
1298 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
1299 <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
1300 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
1301 interconnect-names = "qup-core",
1302 "qup-config";
1303 status = "disabled";
1304 };
1305
1306 i2c5: i2c@4a94000 {
1307 compatible = "qcom,geni-i2c";
1308 reg = <0x0 0x04a94000 0x0 0x4000>;
1309 interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
1310 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1311 clock-names = "se";
1312 pinctrl-0 = <&qup_i2c5_default>;
1313 pinctrl-names = "default";
1314 dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
1315 <&gpi_dma0 1 5 QCOM_GPI_I2C>;
1316 dma-names = "tx", "rx";
1317 interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
1318 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
1319 <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
1320 &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>,
1321 <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG
1322 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
1323 interconnect-names = "qup-core",
1324 "qup-config",
1325 "qup-memory";
1326 #address-cells = <1>;
1327 #size-cells = <0>;
1328 status = "disabled";
1329 };
1330
1331 spi5: spi@4a94000 {
1332 compatible = "qcom,geni-spi";
1333 reg = <0x0 0x04a94000 0x0 0x4000>;
1334 interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
1335 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1336 clock-names = "se";
1337 pinctrl-0 = <&qup_spi5_default>;
1338 pinctrl-names = "default";
1339 dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
1340 <&gpi_dma0 1 5 QCOM_GPI_SPI>;
1341 dma-names = "tx", "rx";
1342 interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG
1343 &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>,
1344 <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
1345 &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>;
1346 interconnect-names = "qup-core",
1347 "qup-config";
1348 #address-cells = <1>;
1349 #size-cells = <0>;
1350 status = "disabled";
1351 };
1352 };
1353
1354 usb: usb@4ef8800 {
1355 compatible = "qcom,qcm2290-dwc3", "qcom,dwc3";
1356 reg = <0x0 0x04ef8800 0x0 0x400>;
1357 interrupts-extended = <&intc GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
1358 <&mpm 12 IRQ_TYPE_LEVEL_HIGH>;
1359 interrupt-names = "hs_phy_irq",
1360 "ss_phy_irq";
1361
1362 clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
1363 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
1364 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
1365 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
1366 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
1367 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
1368 clock-names = "cfg_noc",
1369 "core",
1370 "iface",
1371 "sleep",
1372 "mock_utmi",
1373 "xo";
1374
1375 assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
1376 <&gcc GCC_USB30_PRIM_MASTER_CLK>;
1377 assigned-clock-rates = <19200000>, <133333333>;
1378
1379 resets = <&gcc GCC_USB30_PRIM_BCR>;
1380 power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
1381 /* TODO: USB<->IPA path */
1382 interconnects = <&system_noc MASTER_USB3_0 RPM_ALWAYS_TAG
1383 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
1384 <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
1385 &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>;
1386 interconnect-names = "usb-ddr",
1387 "apps-usb";
1388 wakeup-source;
1389
1390 #address-cells = <2>;
1391 #size-cells = <2>;
1392 ranges;
1393
1394 status = "disabled";
1395
1396 usb_dwc3: usb@4e00000 {
1397 compatible = "snps,dwc3";
1398 reg = <0x0 0x04e00000 0x0 0xcd00>;
1399 interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
1400 phys = <&usb_hsphy>, <&usb_qmpphy>;
1401 phy-names = "usb2-phy", "usb3-phy";
1402 iommus = <&apps_smmu 0x120 0x0>;
1403 snps,dis_u2_susphy_quirk;
1404 snps,dis_enblslpm_quirk;
1405 snps,has-lpm-erratum;
1406 snps,hird-threshold = /bits/ 8 <0x10>;
1407 snps,usb3_lpm_capable;
1408 maximum-speed = "super-speed";
1409 dr_mode = "otg";
1410 usb-role-switch;
1411
1412 ports {
1413 #address-cells = <1>;
1414 #size-cells = <0>;
1415
1416 port@0 {
1417 reg = <0>;
1418
1419 usb_dwc3_hs: endpoint {
1420 };
1421 };
1422
1423 port@1 {
1424 reg = <1>;
1425
1426 usb_dwc3_ss: endpoint {
1427 remote-endpoint = <&usb_qmpphy_usb_ss_in>;
1428 };
1429 };
1430 };
1431 };
1432 };
1433
1434 gpu: gpu@5900000 {
1435 compatible = "qcom,adreno-07000200", "qcom,adreno";
1436 reg = <0x0 0x05900000 0x0 0x40000>;
1437 reg-names = "kgsl_3d0_reg_memory";
1438
1439 interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
1440
1441 clocks = <&gpucc GPU_CC_GX_GFX3D_CLK>,
1442 <&gpucc GPU_CC_AHB_CLK>,
1443 <&gcc GCC_BIMC_GPU_AXI_CLK>,
1444 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
1445 <&gpucc GPU_CC_CX_GMU_CLK>,
1446 <&gpucc GPU_CC_CXO_CLK>;
1447 clock-names = "core",
1448 "iface",
1449 "mem_iface",
1450 "alt_mem_iface",
1451 "gmu",
1452 "xo";
1453
1454 interconnects = <&bimc MASTER_GFX3D RPM_ALWAYS_TAG
1455 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
1456 interconnect-names = "gfx-mem";
1457
1458 iommus = <&adreno_smmu 0 1>,
1459 <&adreno_smmu 2 0>;
1460 operating-points-v2 = <&gpu_opp_table>;
1461 power-domains = <&rpmpd QCM2290_VDDCX>;
1462 qcom,gmu = <&gmu_wrapper>;
1463
1464 nvmem-cells = <&gpu_speed_bin>;
1465 nvmem-cell-names = "speed_bin";
1466 #cooling-cells = <2>;
1467
1468 status = "disabled";
1469
1470 zap-shader {
1471 memory-region = <&pil_gpu_mem>;
1472 };
1473
1474 gpu_opp_table: opp-table {
1475 compatible = "operating-points-v2";
1476
1477 /* TODO: Scale RPM_SMD_BIMC_GPU_CLK w/ turbo freqs */
1478 opp-1123200000 {
1479 opp-hz = /bits/ 64 <1123200000>;
1480 required-opps = <&rpmpd_opp_turbo_plus>;
1481 opp-peak-kBps = <6881000>;
1482 opp-supported-hw = <0x3>;
1483 turbo-mode;
1484 };
1485
1486 opp-1017600000 {
1487 opp-hz = /bits/ 64 <1017600000>;
1488 required-opps = <&rpmpd_opp_turbo>;
1489 opp-peak-kBps = <6881000>;
1490 opp-supported-hw = <0x3>;
1491 turbo-mode;
1492 };
1493
1494 opp-921600000 {
1495 opp-hz = /bits/ 64 <921600000>;
1496 required-opps = <&rpmpd_opp_nom_plus>;
1497 opp-peak-kBps = <6881000>;
1498 opp-supported-hw = <0x3>;
1499 };
1500
1501 opp-844800000 {
1502 opp-hz = /bits/ 64 <844800000>;
1503 required-opps = <&rpmpd_opp_nom>;
1504 opp-peak-kBps = <6881000>;
1505 opp-supported-hw = <0x7>;
1506 };
1507
1508 opp-672000000 {
1509 opp-hz = /bits/ 64 <672000000>;
1510 required-opps = <&rpmpd_opp_svs_plus>;
1511 opp-peak-kBps = <3879000>;
1512 opp-supported-hw = <0xf>;
1513 };
1514
1515 opp-537600000 {
1516 opp-hz = /bits/ 64 <537600000>;
1517 required-opps = <&rpmpd_opp_svs>;
1518 opp-peak-kBps = <2929000>;
1519 opp-supported-hw = <0xf>;
1520 };
1521
1522 opp-355200000 {
1523 opp-hz = /bits/ 64 <355200000>;
1524 required-opps = <&rpmpd_opp_low_svs>;
1525 opp-peak-kBps = <1720000>;
1526 opp-supported-hw = <0xf>;
1527 };
1528 };
1529 };
1530
1531 gmu_wrapper: gmu@596a000 {
1532 compatible = "qcom,adreno-gmu-wrapper";
1533 reg = <0x0 0x0596a000 0x0 0x30000>;
1534 reg-names = "gmu";
1535 power-domains = <&gpucc GPU_CX_GDSC>,
1536 <&gpucc GPU_GX_GDSC>;
1537 power-domain-names = "cx",
1538 "gx";
1539 };
1540
1541 gpucc: clock-controller@5990000 {
1542 compatible = "qcom,qcm2290-gpucc";
1543 reg = <0x0 0x05990000 0x0 0x9000>;
1544 clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
1545 <&rpmcc RPM_SMD_XO_CLK_SRC>,
1546 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
1547 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
1548 power-domains = <&rpmpd QCM2290_VDDCX>;
1549 required-opps = <&rpmpd_opp_low_svs>;
1550 #clock-cells = <1>;
1551 #reset-cells = <1>;
1552 #power-domain-cells = <1>;
1553 };
1554
1555 adreno_smmu: iommu@59a0000 {
1556 compatible = "qcom,qcm2290-smmu-500", "qcom,adreno-smmu",
1557 "qcom,smmu-500", "arm,mmu-500";
1558 reg = <0x0 0x059a0000 0x0 0x10000>;
1559 interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
1560 <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
1561 <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
1562 <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
1563 <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
1564 <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
1565 <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
1566 <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
1567 <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
1568
1569 clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
1570 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
1571 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
1572 clock-names = "mem",
1573 "hlos",
1574 "iface";
1575
1576 power-domains = <&gpucc GPU_CX_GDSC>;
1577
1578 #global-interrupts = <1>;
1579 #iommu-cells = <2>;
1580 };
1581
1582 mdss: display-subsystem@5e00000 {
1583 compatible = "qcom,qcm2290-mdss";
1584 reg = <0x0 0x05e00000 0x0 0x1000>;
1585 reg-names = "mdss";
1586 interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
1587 interrupt-controller;
1588 #interrupt-cells = <1>;
1589
1590 clocks = <&gcc GCC_DISP_AHB_CLK>,
1591 <&gcc GCC_DISP_HF_AXI_CLK>,
1592 <&dispcc DISP_CC_MDSS_MDP_CLK>;
1593 clock-names = "iface",
1594 "bus",
1595 "core";
1596
1597 resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
1598
1599 power-domains = <&dispcc MDSS_GDSC>;
1600
1601 iommus = <&apps_smmu 0x420 0x2>,
1602 <&apps_smmu 0x421 0x0>;
1603 interconnects = <&mmrt_virt MASTER_MDP0 RPM_ALWAYS_TAG
1604 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
1605 <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG
1606 &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>;
1607 interconnect-names = "mdp0-mem",
1608 "cpu-cfg";
1609
1610 #address-cells = <2>;
1611 #size-cells = <2>;
1612 ranges;
1613
1614 status = "disabled";
1615
1616 mdp: display-controller@5e01000 {
1617 compatible = "qcom,qcm2290-dpu";
1618 reg = <0x0 0x05e01000 0x0 0x8f000>,
1619 <0x0 0x05eb0000 0x0 0x2008>;
1620 reg-names = "mdp",
1621 "vbif";
1622
1623 interrupt-parent = <&mdss>;
1624 interrupts = <0>;
1625
1626 clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
1627 <&dispcc DISP_CC_MDSS_AHB_CLK>,
1628 <&dispcc DISP_CC_MDSS_MDP_CLK>,
1629 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
1630 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
1631 clock-names = "bus",
1632 "iface",
1633 "core",
1634 "lut",
1635 "vsync";
1636
1637 operating-points-v2 = <&mdp_opp_table>;
1638 power-domains = <&rpmpd QCM2290_VDDCX>;
1639
1640 ports {
1641 #address-cells = <1>;
1642 #size-cells = <0>;
1643
1644 port@0 {
1645 reg = <0>;
1646 dpu_intf1_out: endpoint {
1647 remote-endpoint = <&mdss_dsi0_in>;
1648 };
1649 };
1650 };
1651
1652 mdp_opp_table: opp-table {
1653 compatible = "operating-points-v2";
1654
1655 opp-19200000 {
1656 opp-hz = /bits/ 64 <19200000>;
1657 required-opps = <&rpmpd_opp_min_svs>;
1658 };
1659
1660 opp-192000000 {
1661 opp-hz = /bits/ 64 <192000000>;
1662 required-opps = <&rpmpd_opp_low_svs>;
1663 };
1664
1665 opp-256000000 {
1666 opp-hz = /bits/ 64 <256000000>;
1667 required-opps = <&rpmpd_opp_svs>;
1668 };
1669
1670 opp-307200000 {
1671 opp-hz = /bits/ 64 <307200000>;
1672 required-opps = <&rpmpd_opp_svs_plus>;
1673 };
1674
1675 opp-384000000 {
1676 opp-hz = /bits/ 64 <384000000>;
1677 required-opps = <&rpmpd_opp_nom>;
1678 };
1679 };
1680 };
1681
1682 mdss_dsi0: dsi@5e94000 {
1683 compatible = "qcom,qcm2290-dsi-ctrl", "qcom,mdss-dsi-ctrl";
1684 reg = <0x0 0x05e94000 0x0 0x400>;
1685 reg-names = "dsi_ctrl";
1686
1687 interrupt-parent = <&mdss>;
1688 interrupts = <4>;
1689
1690 clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
1691 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
1692 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
1693 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
1694 <&dispcc DISP_CC_MDSS_AHB_CLK>,
1695 <&gcc GCC_DISP_HF_AXI_CLK>;
1696 clock-names = "byte",
1697 "byte_intf",
1698 "pixel",
1699 "core",
1700 "iface",
1701 "bus";
1702
1703 assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
1704 <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
1705 assigned-clock-parents = <&mdss_dsi0_phy 0>,
1706 <&mdss_dsi0_phy 1>;
1707
1708 operating-points-v2 = <&dsi_opp_table>;
1709 power-domains = <&rpmpd QCM2290_VDDCX>;
1710 phys = <&mdss_dsi0_phy>;
1711
1712 #address-cells = <1>;
1713 #size-cells = <0>;
1714
1715 status = "disabled";
1716
1717 dsi_opp_table: opp-table {
1718 compatible = "operating-points-v2";
1719
1720 opp-19200000 {
1721 opp-hz = /bits/ 64 <19200000>;
1722 required-opps = <&rpmpd_opp_min_svs>;
1723 };
1724
1725 opp-164000000 {
1726 opp-hz = /bits/ 64 <164000000>;
1727 required-opps = <&rpmpd_opp_low_svs>;
1728 };
1729
1730 opp-187500000 {
1731 opp-hz = /bits/ 64 <187500000>;
1732 required-opps = <&rpmpd_opp_svs>;
1733 };
1734 };
1735
1736 ports {
1737 #address-cells = <1>;
1738 #size-cells = <0>;
1739
1740 port@0 {
1741 reg = <0>;
1742
1743 mdss_dsi0_in: endpoint {
1744 remote-endpoint = <&dpu_intf1_out>;
1745 };
1746 };
1747
1748 port@1 {
1749 reg = <1>;
1750
1751 mdss_dsi0_out: endpoint {
1752 };
1753 };
1754 };
1755 };
1756
1757 mdss_dsi0_phy: phy@5e94400 {
1758 compatible = "qcom,dsi-phy-14nm-2290";
1759 reg = <0x0 0x05e94400 0x0 0x100>,
1760 <0x0 0x05e94500 0x0 0x300>,
1761 <0x0 0x05e94800 0x0 0x188>;
1762 reg-names = "dsi_phy",
1763 "dsi_phy_lane",
1764 "dsi_pll";
1765
1766 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
1767 <&rpmcc RPM_SMD_XO_CLK_SRC>;
1768 clock-names = "iface",
1769 "ref";
1770
1771 power-domains = <&rpmpd QCM2290_VDDMX>;
1772 required-opps = <&rpmpd_opp_nom>;
1773
1774 #clock-cells = <1>;
1775 #phy-cells = <0>;
1776
1777 status = "disabled";
1778 };
1779 };
1780
1781 dispcc: clock-controller@5f00000 {
1782 compatible = "qcom,qcm2290-dispcc";
1783 reg = <0x0 0x05f00000 0x0 0x20000>;
1784 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
1785 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
1786 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
1787 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
1788 <&mdss_dsi0_phy 0>,
1789 <&mdss_dsi0_phy 1>;
1790 clock-names = "bi_tcxo",
1791 "bi_tcxo_ao",
1792 "gcc_disp_gpll0_clk_src",
1793 "gcc_disp_gpll0_div_clk_src",
1794 "dsi0_phy_pll_out_byteclk",
1795 "dsi0_phy_pll_out_dsiclk";
1796 #power-domain-cells = <1>;
1797 #clock-cells = <1>;
1798 #reset-cells = <1>;
1799 };
1800
1801 remoteproc_mpss: remoteproc@6080000 {
1802 compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas";
1803 reg = <0x0 0x06080000 0x0 0x100>;
1804
1805 interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
1806 <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
1807 <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
1808 <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
1809 <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
1810 <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
1811 interrupt-names = "wdog",
1812 "fatal",
1813 "ready",
1814 "handover",
1815 "stop-ack",
1816 "shutdown-ack";
1817
1818 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
1819 clock-names = "xo";
1820
1821 power-domains = <&rpmpd QCM2290_VDDCX>;
1822
1823 memory-region = <&pil_modem_mem>;
1824
1825 qcom,smem-states = <&modem_smp2p_out 0>;
1826 qcom,smem-state-names = "stop";
1827
1828 status = "disabled";
1829
1830 glink-edge {
1831 interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
1832 label = "mpss";
1833 qcom,remote-pid = <1>;
1834 mboxes = <&apcs_glb 12>;
1835 };
1836 };
1837
1838 remoteproc_adsp: remoteproc@ab00000 {
1839 compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas";
1840 reg = <0x0 0x0ab00000 0x0 0x100>;
1841
1842 interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
1843 <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
1844 <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
1845 <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
1846 <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
1847 interrupt-names = "wdog",
1848 "fatal",
1849 "ready",
1850 "handover",
1851 "stop-ack";
1852
1853 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
1854 clock-names = "xo";
1855
1856 power-domains = <&rpmpd QCM2290_VDD_LPI_CX>,
1857 <&rpmpd QCM2290_VDD_LPI_MX>;
1858
1859 memory-region = <&pil_adsp_mem>;
1860
1861 qcom,smem-states = <&adsp_smp2p_out 0>;
1862 qcom,smem-state-names = "stop";
1863
1864 status = "disabled";
1865
1866 glink-edge {
1867 interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
1868 label = "lpass";
1869 qcom,remote-pid = <2>;
1870 mboxes = <&apcs_glb 8>;
1871 };
1872 };
1873
1874 apps_smmu: iommu@c600000 {
1875 compatible = "qcom,qcm2290-smmu-500", "qcom,smmu-500", "arm,mmu-500";
1876 reg = <0x0 0x0c600000 0x0 0x80000>;
1877 #iommu-cells = <2>;
1878 #global-interrupts = <1>;
1879
1880 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
1881 <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
1882 <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
1883 <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
1884 <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
1885 <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
1886 <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
1887 <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
1888 <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
1889 <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
1890 <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
1891 <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
1892 <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
1893 <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
1894 <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
1895 <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
1896 <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
1897 <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
1898 <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
1899 <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
1900 <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
1901 <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
1902 <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
1903 <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
1904 <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
1905 <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
1906 <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
1907 <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
1908 <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
1909 <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
1910 <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
1911 <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
1912 <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
1913 <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
1914 <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
1915 <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
1916 <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
1917 <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
1918 <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
1919 <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
1920 <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
1921 <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
1922 <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
1923 <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
1924 <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
1925 <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
1926 <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
1927 <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
1928 <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
1929 <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
1930 <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
1931 <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
1932 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
1933 <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
1934 <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
1935 <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
1936 <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
1937 <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
1938 <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
1939 <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
1940 <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
1941 <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
1942 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
1943 <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
1944 <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
1945 };
1946
1947 wifi: wifi@c800000 {
1948 compatible = "qcom,wcn3990-wifi";
1949 reg = <0x0 0x0c800000 0x0 0x800000>;
1950 reg-names = "membase";
1951 memory-region = <&wlan_msa_mem>;
1952 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
1953 <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
1954 <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
1955 <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
1956 <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
1957 <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
1958 <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
1959 <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
1960 <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
1961 <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
1962 <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
1963 <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
1964 iommus = <&apps_smmu 0x1a0 0x1>;
1965 qcom,msa-fixed-perm;
1966 status = "disabled";
1967 };
1968
1969 watchdog@f017000 {
1970 compatible = "qcom,apss-wdt-qcm2290", "qcom,kpss-wdt";
1971 reg = <0x0 0x0f017000 0x0 0x1000>;
1972 interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
1973 <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
1974 clocks = <&sleep_clk>;
1975 };
1976
1977 apcs_glb: mailbox@f111000 {
1978 compatible = "qcom,qcm2290-apcs-hmss-global";
1979 reg = <0x0 0x0f111000 0x0 0x1000>;
1980 #mbox-cells = <1>;
1981 };
1982
1983 timer@f120000 {
1984 compatible = "arm,armv7-timer-mem";
1985 reg = <0x0 0x0f120000 0x0 0x1000>;
1986 #address-cells = <1>;
1987 #size-cells = <1>;
1988 ranges = <0 0x0 0x0f121000 0x8000>;
1989
1990 frame@0 {
1991 reg = <0x0 0x1000>,
1992 <0x1000 0x1000>;
1993 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
1994 <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
1995 frame-number = <0>;
1996 };
1997
1998 frame@2000 {
1999 reg = <0x2000 0x1000>;
2000 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
2001 frame-number = <1>;
2002 status = "disabled";
2003 };
2004
2005 frame@3000 {
2006 reg = <0x3000 0x1000>;
2007 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
2008 frame-number = <2>;
2009 status = "disabled";
2010 };
2011
2012 frame@4000 {
2013 reg = <0x4000 0x1000>;
2014 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
2015 frame-number = <3>;
2016 status = "disabled";
2017 };
2018
2019 frame@5000 {
2020 reg = <0x5000 0x1000>;
2021 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
2022 frame-number = <4>;
2023 status = "disabled";
2024 };
2025
2026 frame@6000 {
2027 reg = <0x6000 0x1000>;
2028 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
2029 frame-number = <5>;
2030 status = "disabled";
2031 };
2032
2033 frame@7000 {
2034 reg = <0x7000 0x1000>;
2035 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
2036 frame-number = <6>;
2037 status = "disabled";
2038 };
2039 };
2040
2041 intc: interrupt-controller@f200000 {
2042 compatible = "arm,gic-v3";
2043 reg = <0x0 0x0f200000 0x0 0x10000>,
2044 <0x0 0x0f300000 0x0 0x100000>;
2045 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
2046 #interrupt-cells = <3>;
2047 interrupt-controller;
2048 interrupt-parent = <&intc>;
2049 #redistributor-regions = <1>;
2050 redistributor-stride = <0x0 0x20000>;
2051 };
2052
2053 cpufreq_hw: cpufreq@f521000 {
2054 compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw";
2055 reg = <0x0 0x0f521000 0x0 0x1000>;
2056 reg-names = "freq-domain0";
2057 interrupts-extended = <&lmh_cluster 0>;
2058 interrupt-names = "dcvsh-irq-0";
2059 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
2060 clock-names = "xo", "alternate";
2061
2062 #freq-domain-cells = <1>;
2063 #clock-cells = <1>;
2064 };
2065
2066 lmh_cluster: lmh@f550800 {
2067 compatible = "qcom,qcm2290-lmh", "qcom,sm8150-lmh";
2068 reg = <0x0 0x0f550800 0x0 0x400>;
2069 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
2070 cpus = <&CPU0>;
2071 qcom,lmh-temp-arm-millicelsius = <65000>;
2072 qcom,lmh-temp-low-millicelsius = <94500>;
2073 qcom,lmh-temp-high-millicelsius = <95000>;
2074 interrupt-controller;
2075 #interrupt-cells = <1>;
2076 };
2077 };
2078
2079 thermal-zones {
2080 mapss-thermal {
2081 thermal-sensors = <&tsens0 0>;
2082
2083 trips {
2084 mapss_alert0: trip-point0 {
2085 temperature = <90000>;
2086 hysteresis = <2000>;
2087 type = "passive";
2088 };
2089
2090 mapss_alert1: trip-point1 {
2091 temperature = <95000>;
2092 hysteresis = <2000>;
2093 type = "passive";
2094 };
2095
2096 mapss_crit: mapss-crit {
2097 temperature = <110000>;
2098 hysteresis = <1000>;
2099 type = "critical";
2100 };
2101 };
2102 };
2103
2104 video-thermal {
2105 thermal-sensors = <&tsens0 1>;
2106
2107 trips {
2108 video_alert0: trip-point0 {
2109 temperature = <90000>;
2110 hysteresis = <2000>;
2111 type = "passive";
2112 };
2113
2114 video_alert1: trip-point1 {
2115 temperature = <95000>;
2116 hysteresis = <2000>;
2117 type = "passive";
2118 };
2119
2120 video_crit: video-crit {
2121 temperature = <110000>;
2122 hysteresis = <1000>;
2123 type = "critical";
2124 };
2125 };
2126 };
2127
2128 wlan-thermal {
2129 thermal-sensors = <&tsens0 2>;
2130
2131 trips {
2132 wlan_alert0: trip-point0 {
2133 temperature = <90000>;
2134 hysteresis = <2000>;
2135 type = "passive";
2136 };
2137
2138 wlan_alert1: trip-point1 {
2139 temperature = <95000>;
2140 hysteresis = <2000>;
2141 type = "passive";
2142 };
2143
2144 wlan_crit: wlan-crit {
2145 temperature = <110000>;
2146 hysteresis = <1000>;
2147 type = "critical";
2148 };
2149 };
2150 };
2151
2152 cpuss0-thermal {
2153 thermal-sensors = <&tsens0 3>;
2154
2155 trips {
2156 cpuss0_alert0: trip-point0 {
2157 temperature = <90000>;
2158 hysteresis = <2000>;
2159 type = "passive";
2160 };
2161
2162 cpuss0_alert1: trip-point1 {
2163 temperature = <95000>;
2164 hysteresis = <2000>;
2165 type = "passive";
2166 };
2167
2168 cpuss0_crit: cpuss0-crit {
2169 temperature = <110000>;
2170 hysteresis = <1000>;
2171 type = "critical";
2172 };
2173 };
2174 };
2175
2176 cpuss1-thermal {
2177 thermal-sensors = <&tsens0 4>;
2178
2179 trips {
2180 cpuss1_alert0: trip-point0 {
2181 temperature = <90000>;
2182 hysteresis = <2000>;
2183 type = "passive";
2184 };
2185
2186 cpuss1_alert1: trip-point1 {
2187 temperature = <95000>;
2188 hysteresis = <2000>;
2189 type = "passive";
2190 };
2191
2192 cpuss1_crit: cpuss1-crit {
2193 temperature = <110000>;
2194 hysteresis = <1000>;
2195 type = "critical";
2196 };
2197 };
2198 };
2199
2200 mdm0-thermal {
2201 thermal-sensors = <&tsens0 5>;
2202
2203 trips {
2204 mdm0_alert0: trip-point0 {
2205 temperature = <90000>;
2206 hysteresis = <2000>;
2207 type = "passive";
2208 };
2209
2210 mdm0_alert1: trip-point1 {
2211 temperature = <95000>;
2212 hysteresis = <2000>;
2213 type = "passive";
2214 };
2215
2216 mdm0_crit: mdm0-crit {
2217 temperature = <110000>;
2218 hysteresis = <1000>;
2219 type = "critical";
2220 };
2221 };
2222 };
2223
2224 mdm1-thermal {
2225 thermal-sensors = <&tsens0 6>;
2226
2227 trips {
2228 mdm1_alert0: trip-point0 {
2229 temperature = <90000>;
2230 hysteresis = <2000>;
2231 type = "passive";
2232 };
2233
2234 mdm1_alert1: trip-point1 {
2235 temperature = <95000>;
2236 hysteresis = <2000>;
2237 type = "passive";
2238 };
2239
2240 mdm1_crit: mdm1-crit {
2241 temperature = <110000>;
2242 hysteresis = <1000>;
2243 type = "critical";
2244 };
2245 };
2246 };
2247
2248 gpu-thermal {
2249 thermal-sensors = <&tsens0 7>;
2250
2251 trips {
2252 gpu_alert0: trip-point0 {
2253 temperature = <90000>;
2254 hysteresis = <2000>;
2255 type = "passive";
2256 };
2257
2258 gpu_alert1: trip-point1 {
2259 temperature = <95000>;
2260 hysteresis = <2000>;
2261 type = "passive";
2262 };
2263
2264 gpu_crit: gpu-crit {
2265 temperature = <110000>;
2266 hysteresis = <1000>;
2267 type = "critical";
2268 };
2269 };
2270 };
2271
2272 hm-center-thermal {
2273 thermal-sensors = <&tsens0 8>;
2274
2275 trips {
2276 hm_center_alert0: trip-point0 {
2277 temperature = <90000>;
2278 hysteresis = <2000>;
2279 type = "passive";
2280 };
2281
2282 hm_center_alert1: trip-point1 {
2283 temperature = <95000>;
2284 hysteresis = <2000>;
2285 type = "passive";
2286 };
2287
2288 hm_center_crit: hm-center-crit {
2289 temperature = <110000>;
2290 hysteresis = <1000>;
2291 type = "critical";
2292 };
2293 };
2294 };
2295
2296 camera-thermal {
2297 thermal-sensors = <&tsens0 9>;
2298
2299 trips {
2300 camera_alert0: trip-point0 {
2301 temperature = <90000>;
2302 hysteresis = <2000>;
2303 type = "passive";
2304 };
2305
2306 camera_alert1: trip-point1 {
2307 temperature = <95000>;
2308 hysteresis = <2000>;
2309 type = "passive";
2310 };
2311
2312 camera_crit: camera-crit {
2313 temperature = <110000>;
2314 hysteresis = <1000>;
2315 type = "critical";
2316 };
2317 };
2318 };
2319 };
2320
2321 timer {
2322 compatible = "arm,armv8-timer";
2323 interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
2324 <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
2325 <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
2326 <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
2327 };
2328 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.