~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/arch/arm64/boot/dts/qcom/qdu1000.dtsi

Version: ~ [ linux-6.11-rc3 ] ~ [ linux-6.10.4 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.45 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.104 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.164 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.223 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.281 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.319 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.9 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: BSD-3-Clause
  2 /*
  3  * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
  4  */
  5 
  6 #include <dt-bindings/clock/qcom,qdu1000-gcc.h>
  7 #include <dt-bindings/clock/qcom,rpmh.h>
  8 #include <dt-bindings/dma/qcom-gpi.h>
  9 #include <dt-bindings/gpio/gpio.h>
 10 #include <dt-bindings/interconnect/qcom,icc.h>
 11 #include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h>
 12 #include <dt-bindings/interrupt-controller/arm-gic.h>
 13 #include <dt-bindings/power/qcom-rpmpd.h>
 14 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 15 
 16 / {
 17         interrupt-parent = <&intc>;
 18 
 19         #address-cells = <2>;
 20         #size-cells = <2>;
 21 
 22         chosen: chosen { };
 23 
 24         cpus {
 25                 #address-cells = <2>;
 26                 #size-cells = <0>;
 27 
 28                 CPU0: cpu@0 {
 29                         device_type = "cpu";
 30                         compatible = "arm,cortex-a55";
 31                         reg = <0x0 0x0>;
 32                         clocks = <&cpufreq_hw 0>;
 33                         enable-method = "psci";
 34                         power-domains = <&CPU_PD0>;
 35                         power-domain-names = "psci";
 36                         qcom,freq-domains = <&cpufreq_hw 0>;
 37                         next-level-cache = <&L2_0>;
 38                         L2_0: l2-cache {
 39                                 compatible = "cache";
 40                                 cache-level = <2>;
 41                                 cache-unified;
 42                                 next-level-cache = <&L3_0>;
 43                                 L3_0: l3-cache {
 44                                         compatible = "cache";
 45                                         cache-level = <3>;
 46                                         cache-unified;
 47                                 };
 48                         };
 49                 };
 50 
 51                 CPU1: cpu@100 {
 52                         device_type = "cpu";
 53                         compatible = "arm,cortex-a55";
 54                         reg = <0x0 0x100>;
 55                         clocks = <&cpufreq_hw 0>;
 56                         enable-method = "psci";
 57                         power-domains = <&CPU_PD1>;
 58                         power-domain-names = "psci";
 59                         qcom,freq-domains = <&cpufreq_hw 0>;
 60                         next-level-cache = <&L2_100>;
 61                         L2_100: l2-cache {
 62                                 compatible = "cache";
 63                                 cache-level = <2>;
 64                                 cache-unified;
 65                                 next-level-cache = <&L3_0>;
 66                         };
 67                 };
 68 
 69                 CPU2: cpu@200 {
 70                         device_type = "cpu";
 71                         compatible = "arm,cortex-a55";
 72                         reg = <0x0 0x200>;
 73                         clocks = <&cpufreq_hw 0>;
 74                         enable-method = "psci";
 75                         power-domains = <&CPU_PD2>;
 76                         power-domain-names = "psci";
 77                         qcom,freq-domains = <&cpufreq_hw 0>;
 78                         next-level-cache = <&L2_200>;
 79                         L2_200: l2-cache {
 80                                 compatible = "cache";
 81                                 cache-level = <2>;
 82                                 cache-unified;
 83                                 next-level-cache = <&L3_0>;
 84                         };
 85                 };
 86 
 87                 CPU3: cpu@300 {
 88                         device_type = "cpu";
 89                         compatible = "arm,cortex-a55";
 90                         reg = <0x0 0x300>;
 91                         clocks = <&cpufreq_hw 0>;
 92                         enable-method = "psci";
 93                         power-domains = <&CPU_PD3>;
 94                         power-domain-names = "psci";
 95                         qcom,freq-domains = <&cpufreq_hw 0>;
 96                         next-level-cache = <&L2_300>;
 97                         L2_300: l2-cache {
 98                                 compatible = "cache";
 99                                 cache-level = <2>;
100                                 cache-unified;
101                                 next-level-cache = <&L3_0>;
102                         };
103                 };
104 
105                 cpu-map {
106                         cluster0 {
107                                 core0 {
108                                         cpu = <&CPU0>;
109                                 };
110 
111                                 core1 {
112                                         cpu = <&CPU1>;
113                                 };
114 
115                                 core2 {
116                                         cpu = <&CPU2>;
117                                 };
118 
119                                 core3 {
120                                         cpu = <&CPU3>;
121                                 };
122                         };
123                 };
124         };
125 
126         idle-states {
127                 entry-method = "psci";
128 
129                 CPU_OFF: cpu-sleep-0 {
130                         compatible = "arm,idle-state";
131                         entry-latency-us = <274>;
132                         exit-latency-us = <480>;
133                         min-residency-us = <3934>;
134                         arm,psci-suspend-param = <0x40000004>;
135                         local-timer-stop;
136                 };
137         };
138 
139         domain-idle-states {
140                 CLUSTER_SLEEP_0: cluster-sleep-0 {
141                         compatible = "domain-idle-state";
142                         entry-latency-us = <584>;
143                         exit-latency-us = <2332>;
144                         min-residency-us = <6118>;
145                         arm,psci-suspend-param = <0x41000044>;
146                 };
147 
148                 CLUSTER_SLEEP_1: cluster-sleep-1 {
149                         compatible = "domain-idle-state";
150                         entry-latency-us = <2893>;
151                         exit-latency-us = <4023>;
152                         min-residency-us = <9987>;
153                         arm,psci-suspend-param = <0x41003344>;
154                 };
155         };
156 
157         firmware {
158                 scm {
159                         compatible = "qcom,scm-qdu1000", "qcom,scm";
160                 };
161         };
162 
163         mc_virt: interconnect-0 {
164                 compatible = "qcom,qdu1000-mc-virt";
165                 qcom,bcm-voters = <&apps_bcm_voter>;
166                 #interconnect-cells = <2>;
167         };
168 
169         clk_virt: interconnect-1 {
170                 compatible = "qcom,qdu1000-clk-virt";
171                 qcom,bcm-voters = <&apps_bcm_voter>;
172                 #interconnect-cells = <2>;
173         };
174 
175         memory@80000000 {
176                 device_type = "memory";
177                 /* We expect the bootloader to fill in the size */
178                 reg = <0x0 0x80000000 0x0 0x0>;
179         };
180 
181         pmu {
182                 compatible = "arm,cortex-a55-pmu";
183                 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
184         };
185 
186         psci {
187                 compatible = "arm,psci-1.0";
188                 method = "smc";
189 
190                 CPU_PD0: power-domain-cpu0 {
191                         #power-domain-cells = <0>;
192                         power-domains = <&CLUSTER_PD>;
193                         domain-idle-states = <&CPU_OFF>;
194                 };
195 
196                 CPU_PD1: power-domain-cpu1 {
197                         #power-domain-cells = <0>;
198                         power-domains = <&CLUSTER_PD>;
199                         domain-idle-states = <&CPU_OFF>;
200                 };
201 
202                 CPU_PD2: power-domain-cpu2 {
203                         #power-domain-cells = <0>;
204                         power-domains = <&CLUSTER_PD>;
205                         domain-idle-states = <&CPU_OFF>;
206                 };
207 
208                 CPU_PD3: power-domain-cpu3 {
209                         #power-domain-cells = <0>;
210                         power-domains = <&CLUSTER_PD>;
211                         domain-idle-states = <&CPU_OFF>;
212                 };
213 
214                 CLUSTER_PD: power-domain-cluster {
215                         #power-domain-cells = <0>;
216                         domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
217                 };
218         };
219 
220         reserved_memory: reserved-memory {
221                 #address-cells = <2>;
222                 #size-cells = <2>;
223                 ranges;
224 
225                 hyp_mem: hyp@80000000 {
226                         reg = <0x0 0x80000000 0x0 0x600000>;
227                         no-map;
228                 };
229 
230                 xbl_dt_log_mem: xbl-dt-log@80600000 {
231                         reg = <0x0 0x80600000 0x0 0x40000>;
232                         no-map;
233                 };
234 
235                 xbl_ramdump_mem: xbl-ramdump@80640000 {
236                         reg = <0x0 0x80640000 0x0 0x1c0000>;
237                         no-map;
238                 };
239 
240                 aop_image_mem: aop-image@80800000 {
241                         reg = <0x0 0x80800000 0x0 0x60000>;
242                         no-map;
243                 };
244 
245                 aop_cmd_db_mem: aop-cmd-db@80860000 {
246                         compatible = "qcom,cmd-db";
247                         reg = <0x0 0x80860000 0x0 0x20000>;
248                         no-map;
249                 };
250 
251                 aop_config_mem: aop-config@80880000 {
252                         reg = <0x0 0x80880000 0x0 0x20000>;
253                         no-map;
254                 };
255 
256                 tme_crash_dump_mem: tme-crash-dump@808a0000 {
257                         reg = <0x0 0x808a0000 0x0 0x40000>;
258                         no-map;
259                 };
260 
261                 tme_log_mem: tme-log@808e0000 {
262                         reg = <0x0 0x808e0000 0x0 0x4000>;
263                         no-map;
264                 };
265 
266                 uefi_log_mem: uefi-log@808e4000 {
267                         reg = <0x0 0x808e4000 0x0 0x10000>;
268                         no-map;
269                 };
270 
271                 smem_mem: smem@80900000 {
272                         compatible = "qcom,smem";
273                         reg = <0x0 0x80900000 0x0 0x200000>;
274                         no-map;
275                         hwlocks = <&tcsr_mutex 3>;
276                 };
277 
278                 cpucp_fw_mem: cpucp-fw@80b00000 {
279                         reg = <0x0 0x80b00000 0x0 0x100000>;
280                         no-map;
281                 };
282 
283                 xbl_sc_mem: memory@80c00000 {
284                         reg = <0x0 0x80c00000 0x0 0x40000>;
285                         no-map;
286                 };
287 
288                 tz_stat_mem: tz-stat@81d00000 {
289                         reg = <0x0 0x81d00000 0x0 0x100000>;
290                         no-map;
291                 };
292 
293                 tags_mem: tags@81e00000 {
294                         reg = <0x0 0x81e00000 0x0 0x500000>;
295                         no-map;
296                 };
297 
298                 qtee_mem: qtee@82300000 {
299                         reg = <0x0 0x82300000 0x0 0x500000>;
300                         no-map;
301                 };
302 
303                 ta_mem: ta@82800000 {
304                         reg = <0x0 0x82800000 0x0 0xa00000>;
305                         no-map;
306                 };
307 
308                 fs1_mem: fs1@83200000 {
309                         reg = <0x0 0x83200000 0x0 0x400000>;
310                         no-map;
311                 };
312 
313                 fs2_mem: fs2@83600000 {
314                         reg = <0x0 0x83600000 0x0 0x400000>;
315                         no-map;
316                 };
317 
318                 fs3_mem: fs3@83a00000 {
319                         reg = <0x0 0x83a00000 0x0 0x400000>;
320                         no-map;
321                 };
322 
323                 /* Linux kernel image is loaded at 0x83e00000 */
324 
325                 ipa_fw_mem: ipa-fw@8be00000 {
326                         reg = <0x0 0x8be00000 0x0 0x10000>;
327                         no-map;
328                 };
329 
330                 ipa_gsi_mem: ipa-gsi@8be10000 {
331                         reg = <0x0 0x8be10000 0x0 0x14000>;
332                         no-map;
333                 };
334 
335                 mpss_mem: mpss@8c000000 {
336                         reg = <0x0 0x8c000000 0x0 0x12c00000>;
337                         no-map;
338                 };
339 
340                 q6_mpss_dtb_mem: q6-mpss-dtb@9ec00000 {
341                         reg = <0x0 0x9ec00000 0x0 0x80000>;
342                         no-map;
343                 };
344 
345                 tenx_mem: tenx@a0000000 {
346                         reg = <0x0 0xa0000000 0x0 0x19600000>;
347                         no-map;
348                 };
349 
350                 oem_tenx_mem: oem-tenx@b9600000 {
351                         reg = <0x0 0xb9600000 0x0 0x6a00000>;
352                         no-map;
353                 };
354 
355                 tenx_q6_buffer_mem: tenx-q6-buffer@c0000000 {
356                         reg = <0x0 0xc0000000 0x0 0x3200000>;
357                         no-map;
358                 };
359 
360                 ipa_buffer_mem: ipa-buffer@c3200000 {
361                         reg = <0x0 0xc3200000 0x0 0x12c00000>;
362                         no-map;
363                 };
364         };
365 
366         soc: soc@0 {
367                 compatible = "simple-bus";
368                 #address-cells = <2>;
369                 #size-cells = <2>;
370                 ranges = <0 0 0 0 0x10 0>;
371                 dma-ranges = <0 0 0 0 0x10 0>;
372 
373                 gcc: clock-controller@80000 {
374                         compatible = "qcom,qdu1000-gcc";
375                         reg = <0x0 0x80000 0x0 0x1f4200>;
376                         clocks = <&rpmhcc RPMH_CXO_CLK>,
377                                  <&sleep_clk>,
378                                  <0>,
379                                  <0>,
380                                  <0>;
381                         #clock-cells = <1>;
382                         #reset-cells = <1>;
383                         #power-domain-cells = <1>;
384                 };
385 
386                 ecpricc: clock-controller@280000 {
387                         compatible = "qcom,qdu1000-ecpricc";
388                         reg = <0x0 0x00280000 0x0 0x31c00>;
389                         clocks = <&rpmhcc RPMH_CXO_CLK>,
390                                  <&gcc GCC_ECPRI_CC_GPLL0_CLK_SRC>,
391                                  <&gcc GCC_ECPRI_CC_GPLL1_EVEN_CLK_SRC>,
392                                  <&gcc GCC_ECPRI_CC_GPLL2_EVEN_CLK_SRC>,
393                                  <&gcc GCC_ECPRI_CC_GPLL3_CLK_SRC>,
394                                  <&gcc GCC_ECPRI_CC_GPLL4_CLK_SRC>,
395                                  <&gcc GCC_ECPRI_CC_GPLL5_EVEN_CLK_SRC>;
396                         #clock-cells = <1>;
397                         #reset-cells = <1>;
398                 };
399 
400                 gpi_dma0: dma-controller@900000  {
401                         compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
402                         reg = <0x0 0x900000 0x0 0x60000>;
403                         interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
404                                      <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
405                                      <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
406                                      <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
407                                      <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
408                                      <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
409                                      <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
410                                      <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
411                                      <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
412                                      <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
413                                      <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
414                                      <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
415                         dma-channels = <12>;
416                         dma-channel-mask = <0x3f>;
417                         iommus = <&apps_smmu 0xf6 0x0>;
418                         #dma-cells = <3>;
419                 };
420 
421                 qupv3_id_0: geniqup@9c0000 {
422                         compatible = "qcom,geni-se-qup";
423                         reg = <0x0 0x9c0000 0x0 0x2000>;
424                         clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
425                                 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
426                         clock-names = "m-ahb", "s-ahb";
427                         iommus = <&apps_smmu 0xe3 0x0>;
428                         interconnects = <&clk_virt MASTER_QUP_CORE_0 0
429                                          &clk_virt SLAVE_QUP_CORE_0 0>;
430                         interconnect-names = "qup-core";
431 
432                         #address-cells = <2>;
433                         #size-cells = <2>;
434                         ranges;
435                         status = "disabled";
436 
437                         uart0: serial@980000 {
438                                 compatible = "qcom,geni-uart";
439                                 reg = <0x0 0x980000 0x0 0x4000>;
440                                 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
441                                 clock-names = "se";
442                                 pinctrl-0 = <&qup_uart0_default>;
443                                 pinctrl-names = "default";
444                                 interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
445                                 status = "disabled";
446                         };
447 
448                         i2c1: i2c@984000 {
449                                 compatible = "qcom,geni-i2c";
450                                 reg = <0x0 0x984000 0x0 0x4000>;
451                                 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
452                                 clock-names = "se";
453                                 interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
454                                 pinctrl-0 = <&qup_i2c1_data_clk>;
455                                 pinctrl-names = "default";
456                                 #address-cells = <1>;
457                                 #size-cells = <0>;
458                                 status = "disabled";
459                         };
460 
461                         spi1: spi@984000 {
462                                 compatible = "qcom,geni-spi";
463                                 reg = <0x0 0x984000 0x0 0x4000>;
464                                 #address-cells = <1>;
465                                 #size-cells = <0>;
466                                 interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
467                                 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
468                                 clock-names = "se";
469                                 pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
470                                 pinctrl-names = "default";
471                                 status = "disabled";
472                         };
473 
474                         i2c2: i2c@988000 {
475                                 compatible = "qcom,geni-i2c";
476                                 reg = <0x0 0x988000 0x0 0x4000>;
477                                 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
478                                 clock-names = "se";
479                                 interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
480                                 pinctrl-0 = <&qup_i2c2_data_clk>;
481                                 pinctrl-names = "default";
482                                 #address-cells = <1>;
483                                 #size-cells = <0>;
484                                 status = "disabled";
485                         };
486 
487                         spi2: spi@988000 {
488                                 compatible = "qcom,geni-spi";
489                                 reg = <0x0 0x988000 0x0 0x4000>;
490                                 #address-cells = <1>;
491                                 #size-cells = <0>;
492                                 interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
493                                 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
494                                 clock-names = "se";
495                                 pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
496                                 pinctrl-names = "default";
497                                 status = "disabled";
498                         };
499 
500                         i2c3: i2c@98c000 {
501                                 compatible = "qcom,geni-i2c";
502                                 reg = <0x0 0x98c000 0x0 0x4000>;
503                                 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
504                                 clock-names = "se";
505                                 interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
506                                 pinctrl-0 = <&qup_i2c3_data_clk>;
507                                 pinctrl-names = "default";
508                                 #address-cells = <1>;
509                                 #size-cells = <0>;
510                                 status = "disabled";
511                         };
512 
513                         spi3: spi@98c000 {
514                                 compatible = "qcom,geni-spi";
515                                 reg = <0x0 0x98c000 0x0 0x4000>;
516                                 #address-cells = <1>;
517                                 #size-cells = <0>;
518                                 interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
519                                 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
520                                 clock-names = "se";
521                                 pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
522                                 pinctrl-names = "default";
523                                 status = "disabled";
524                         };
525 
526                         i2c4: i2c@990000 {
527                                 compatible = "qcom,geni-i2c";
528                                 reg = <0x0 0x990000 0x0 0x4000>;
529                                 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
530                                 clock-names = "se";
531                                 interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
532                                 pinctrl-0 = <&qup_i2c4_data_clk>;
533                                 pinctrl-names = "default";
534                                 #address-cells = <1>;
535                                 #size-cells = <0>;
536                                 status = "disabled";
537                         };
538 
539                         spi4: spi@990000 {
540                                 compatible = "qcom,geni-spi";
541                                 reg = <0x0 0x990000 0x0 0x4000>;
542                                 #address-cells = <1>;
543                                 #size-cells = <0>;
544                                 interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
545                                 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
546                                 clock-names = "se";
547                                 pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
548                                 pinctrl-names = "default";
549                                 status = "disabled";
550                         };
551 
552                         i2c5: i2c@994000 {
553                                 compatible = "qcom,geni-i2c";
554                                 reg = <0x0 0x994000 0x0 0x4000>;
555                                 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
556                                 clock-names = "se";
557                                 interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
558                                 pinctrl-0 = <&qup_i2c5_data_clk>;
559                                 pinctrl-names = "default";
560                                 #address-cells = <1>;
561                                 #size-cells = <0>;
562                                 status = "disabled";
563                         };
564 
565                         spi5: spi@994000 {
566                                 compatible = "qcom,geni-spi";
567                                 reg = <0x0 0x994000 0x0 0x4000>;
568                                 #address-cells = <1>;
569                                 #size-cells = <0>;
570                                 interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
571                                 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
572                                 clock-names = "se";
573                                 pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
574                                 pinctrl-names = "default";
575                                 status = "disabled";
576                         };
577 
578                         i2c6: i2c@998000 {
579                                 compatible = "qcom,geni-i2c";
580                                 reg = <0x0 0x998000 0x0 0x4000>;
581                                 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
582                                 clock-names = "se";
583                                 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
584                                 pinctrl-0 = <&qup_i2c6_data_clk>;
585                                 pinctrl-names = "default";
586                                 #address-cells = <1>;
587                                 #size-cells = <0>;
588                                 status = "disabled";
589                         };
590 
591                         spi6: spi@998000 {
592                                 compatible = "qcom,geni-spi";
593                                 reg = <0x0 0x998000 0x0 0x4000>;
594                                 #address-cells = <1>;
595                                 #size-cells = <0>;
596                                 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
597                                 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
598                                 clock-names = "se";
599                                 pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
600                                 pinctrl-names = "default";
601                                 status = "disabled";
602                         };
603 
604                         uart7: serial@99c000 {
605                                 compatible = "qcom,geni-debug-uart";
606                                 reg = <0x0 0x99c000 0x0 0x4000>;
607                                 clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
608                                 clock-names = "se";
609                                 pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
610                                 pinctrl-names = "default";
611                                 interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
612                                 status = "disabled";
613                         };
614                 };
615 
616                 gpi_dma1: dma-controller@a00000  {
617                         compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
618                         reg = <0x0 0xa00000 0x0 0x60000>;
619                         interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
620                                      <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
621                                      <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
622                                      <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
623                                      <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
624                                      <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
625                                      <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
626                                      <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
627                                      <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
628                                      <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
629                                      <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
630                                      <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
631                         dma-channels = <12>;
632                         dma-channel-mask = <0x3f>;
633                         iommus = <&apps_smmu 0x116 0x0>;
634                         #dma-cells = <3>;
635                 };
636 
637                 qupv3_id_1: geniqup@ac0000 {
638                         compatible = "qcom,geni-se-qup";
639                         reg = <0x0 0xac0000 0x0 0x2000>;
640                         clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
641                                 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
642                         clock-names = "m-ahb", "s-ahb";
643                         iommus = <&apps_smmu 0x103 0x0>;
644                         #address-cells = <2>;
645                         #size-cells = <2>;
646                         ranges;
647                         status = "disabled";
648 
649                         uart8: serial@a80000 {
650                                 compatible = "qcom,geni-uart";
651                                 reg = <0x0 0xa80000 0x0 0x4000>;
652                                 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
653                                 clock-names = "se";
654                                 pinctrl-0 = <&qup_uart8_default>;
655                                 pinctrl-names = "default";
656                                 interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
657                                 #address-cells = <1>;
658                                 #size-cells = <0>;
659                                 status = "disabled";
660                         };
661 
662                         i2c9: i2c@a84000 {
663                                 compatible = "qcom,geni-i2c";
664                                 reg = <0x0 0xa84000 0x0 0x4000>;
665                                 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
666                                 clock-names = "se";
667                                 interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
668                                 pinctrl-0 = <&qup_i2c9_data_clk>;
669                                 pinctrl-names = "default";
670                                 #address-cells = <1>;
671                                 #size-cells = <0>;
672                                 status = "disabled";
673                         };
674 
675                         spi9: spi@a84000 {
676                                 compatible = "qcom,geni-spi";
677                                 reg = <0x0 0xa84000 0x0 0x4000>;
678                                 #address-cells = <1>;
679                                 #size-cells = <0>;
680                                 interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
681                                 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
682                                 clock-names = "se";
683                                 pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
684                                 pinctrl-names = "default";
685                                 status = "disabled";
686                         };
687 
688                         i2c10: i2c@a88000 {
689                                 compatible = "qcom,geni-i2c";
690                                 reg = <0x0 0xa88000 0x0 0x4000>;
691                                 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
692                                 clock-names = "se";
693                                 interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
694                                 pinctrl-0 = <&qup_i2c10_data_clk>;
695                                 pinctrl-names = "default";
696                                 #address-cells = <1>;
697                                 #size-cells = <0>;
698                                 status = "disabled";
699                         };
700 
701                         spi10: spi@a88000 {
702                                 compatible = "qcom,geni-spi";
703                                 reg = <0x0 0xa88000 0x0 0x4000>;
704                                 #address-cells = <1>;
705                                 #size-cells = <0>;
706                                 interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
707                                 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
708                                 clock-names = "se";
709                                 pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
710                                 pinctrl-names = "default";
711                                 status = "disabled";
712                         };
713 
714                         i2c11: i2c@a8c000 {
715                                 compatible = "qcom,geni-i2c";
716                                 reg = <0x0 0xa8c000 0x0 0x4000>;
717                                 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
718                                 clock-names = "se";
719                                 interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
720                                 pinctrl-0 = <&qup_i2c11_data_clk>;
721                                 pinctrl-names = "default";
722                                 #address-cells = <1>;
723                                 #size-cells = <0>;
724                                 status = "disabled";
725                         };
726 
727                         spi11: spi@a8c000 {
728                                 compatible = "qcom,geni-spi";
729                                 reg = <0x0 0xa8c000 0x0 0x4000>;
730                                 #address-cells = <1>;
731                                 #size-cells = <0>;
732                                 interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
733                                 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
734                                 clock-names = "se";
735                                 pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
736                                 pinctrl-names = "default";
737                                 status = "disabled";
738                         };
739 
740                         i2c12: i2c@a90000 {
741                                 compatible = "qcom,geni-i2c";
742                                 reg = <0x0 0xa90000 0x0 0x4000>;
743                                 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
744                                 clock-names = "se";
745                                 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
746                                 pinctrl-0 = <&qup_i2c12_data_clk>;
747                                 pinctrl-names = "default";
748                                 #address-cells = <1>;
749                                 #size-cells = <0>;
750                                 status = "disabled";
751                         };
752 
753                         spi12: spi@a90000 {
754                                 compatible = "qcom,geni-spi";
755                                 reg = <0x0 0xa90000 0x0 0x4000>;
756                                 #address-cells = <1>;
757                                 #size-cells = <0>;
758                                 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
759                                 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
760                                 clock-names = "se";
761                                 pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
762                                 pinctrl-names = "default";
763                                 status = "disabled";
764                         };
765 
766                         i2c13: i2c@a94000 {
767                                 compatible = "qcom,geni-i2c";
768                                 reg = <0x0 0xa94000 0x0 0x4000>;
769                                 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
770                                 clock-names = "se";
771                                 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
772                                 pinctrl-0 = <&qup_i2c13_data_clk>;
773                                 pinctrl-names = "default";
774                                 #address-cells = <1>;
775                                 #size-cells = <0>;
776                                 status = "disabled";
777                         };
778 
779                         uart13: serial@a94000 {
780                                 compatible = "qcom,geni-uart";
781                                 reg = <0x0 0xa94000 0x0 0x4000>;
782                                 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
783                                 clock-names = "se";
784                                 pinctrl-0 = <&qup_uart13_default>;
785                                 pinctrl-names = "default";
786                                 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
787                                 #address-cells = <1>;
788                                 #size-cells = <0>;
789                                 status = "disabled";
790                         };
791 
792                         spi13: spi@a94000 {
793                                 compatible = "qcom,geni-spi";
794                                 reg = <0x0 0xa94000 0x0 0x4000>;
795                                 #address-cells = <1>;
796                                 #size-cells = <0>;
797                                 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
798                                 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
799                                 clock-names = "se";
800                                 pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
801                                 pinctrl-names = "default";
802                                 status = "disabled";
803                         };
804 
805                         i2c14: i2c@a98000 {
806                                 compatible = "qcom,geni-i2c";
807                                 reg = <0x0 0xa98000 0x0 0x4000>;
808                                 clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
809                                 clock-names = "se";
810                                 interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
811                                 pinctrl-0 = <&qup_i2c14_data_clk>;
812                                 pinctrl-names = "default";
813                                 #address-cells = <1>;
814                                 #size-cells = <0>;
815                                 status = "disabled";
816                         };
817 
818                         spi14: spi@a98000 {
819                                 compatible = "qcom,geni-spi";
820                                 reg = <0x0 0xa98000 0x0 0x4000>;
821                                 #address-cells = <1>;
822                                 #size-cells = <0>;
823                                 interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
824                                 clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
825                                 clock-names = "se";
826                                 pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
827                                 pinctrl-names = "default";
828                                 status = "disabled";
829                         };
830 
831                         i2c15: i2c@a9c000 {
832                                 compatible = "qcom,geni-i2c";
833                                 reg = <0x0 0xa9c000 0x0 0x4000>;
834                                 clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
835                                 clock-names = "se";
836                                 interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
837                                 pinctrl-0 = <&qup_i2c15_data_clk>;
838                                 pinctrl-names = "default";
839                                 #address-cells = <1>;
840                                 #size-cells = <0>;
841                                 status = "disabled";
842                         };
843 
844                         spi15: spi@a9c000 {
845                                 compatible = "qcom,geni-spi";
846                                 reg = <0x0 0xa9c000 0x0 0x4000>;
847                                 #address-cells = <1>;
848                                 #size-cells = <0>;
849                                 interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
850                                 clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
851                                 clock-names = "se";
852                                 pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
853                                 pinctrl-names = "default";
854                                 status = "disabled";
855                         };
856                 };
857 
858                 system_noc: interconnect@1640000 {
859                         compatible = "qcom,qdu1000-system-noc";
860                         reg = <0x0 0x1640000 0x0 0x45080>;
861                         qcom,bcm-voters = <&apps_bcm_voter>;
862                         #interconnect-cells = <2>;
863                 };
864 
865                 tcsr_mutex: hwlock@1f40000 {
866                         compatible = "qcom,tcsr-mutex";
867                         reg = <0x0 0x1f40000 0x0 0x20000>;
868                         #hwlock-cells = <1>;
869                 };
870 
871                 sdhc: mmc@8804000 {
872                         compatible = "qcom,qdu1000-sdhci", "qcom,sdhci-msm-v5";
873                         reg = <0x0 0x08804000 0x0 0x1000>,
874                               <0x0 0x08805000 0x0 0x1000>;
875                         reg-names = "hc", "cqhci";
876 
877                         interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
878                                      <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
879                         interrupt-names = "hc_irq", "pwr_irq";
880 
881                         clocks = <&gcc GCC_SDCC5_AHB_CLK>,
882                                  <&gcc GCC_SDCC5_APPS_CLK>,
883                                  <&rpmhcc RPMH_CXO_CLK>;
884                         clock-names = "iface",
885                                       "core",
886                                       "xo";
887 
888                         resets = <&gcc GCC_SDCC5_BCR>;
889 
890                         interconnects = <&system_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>,
891                                         <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_SDCC_2 0>;
892                         interconnect-names = "sdhc-ddr", "cpu-sdhc";
893                         power-domains = <&rpmhpd QDU1000_CX>;
894                         operating-points-v2 = <&sdhc1_opp_table>;
895 
896                         iommus = <&apps_smmu 0x80 0x0>;
897                         dma-coherent;
898 
899                         bus-width = <8>;
900 
901                         qcom,dll-config = <0x0007642c>;
902                         qcom,ddr-config = <0x80040868>;
903 
904                         status = "disabled";
905 
906                         sdhc1_opp_table: opp-table {
907                                 compatible = "operating-points-v2";
908 
909                                 opp-384000000 {
910                                         opp-hz = /bits/ 64 <384000000>;
911                                         required-opps = <&rpmhpd_opp_nom>;
912                                         opp-peak-kBps = <6528000 1652800>;
913                                         opp-avg-kBps = <400000 0>;
914                                 };
915                         };
916                 };
917 
918                 usb_1_hsphy: phy@88e3000 {
919                         compatible = "qcom,qdu1000-usb-hs-phy",
920                                      "qcom,usb-snps-hs-7nm-phy";
921                         reg = <0x0 0x088e3000 0x0 0x120>;
922                         #phy-cells = <0>;
923 
924                         clocks =<&gcc GCC_USB2_CLKREF_EN>;
925                         clock-names = "ref";
926 
927                         resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
928 
929                         status = "disabled";
930                 };
931 
932                 usb_1_qmpphy: phy@88e5000 {
933                         compatible = "qcom,qdu1000-qmp-usb3-uni-phy";
934                         reg = <0x0 0x088e5000 0x0 0x2000>;
935 
936                         clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
937                                  <&gcc GCC_USB2_CLKREF_EN>,
938                                  <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
939                                  <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
940                         clock-names = "aux",
941                                       "ref",
942                                       "com_aux",
943                                       "pipe";
944 
945                         resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
946                                  <&gcc GCC_USB3PHY_PHY_PRIM_BCR>;
947                         reset-names = "phy",
948                                       "phy_phy";
949 
950                         #clock-cells = <0>;
951                         clock-output-names = "usb3_uni_phy_pipe_clk_src";
952 
953                         #phy-cells = <0>;
954 
955                         status = "disabled";
956                 };
957 
958                 usb_1: usb@a6f8800 {
959                         compatible = "qcom,qdu1000-dwc3", "qcom,dwc3";
960                         reg = <0 0x0a6f8800 0 0x400>;
961                         #address-cells = <2>;
962                         #size-cells = <2>;
963                         ranges;
964 
965                         clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
966                                  <&gcc GCC_USB30_PRIM_MASTER_CLK>,
967                                  <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
968                                  <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
969                         clock-names = "cfg_noc",
970                                       "core",
971                                       "sleep",
972                                       "mock_utmi";
973 
974                         assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
975                                           <&gcc GCC_USB30_PRIM_MASTER_CLK>;
976                         assigned-clock-rates = <19200000>, <200000000>;
977 
978                         interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
979                                               <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
980                                               <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
981                                               <&pdc 9 IRQ_TYPE_EDGE_BOTH>,
982                                               <&pdc 6 IRQ_TYPE_LEVEL_HIGH>;
983                         interrupt-names = "pwr_event",
984                                           "hs_phy_irq",
985                                           "dp_hs_phy_irq",
986                                           "dm_hs_phy_irq",
987                                           "ss_phy_irq";
988 
989                         power-domains = <&gcc USB30_PRIM_GDSC>;
990                         required-opps = <&rpmhpd_opp_nom>;
991 
992                         resets = <&gcc GCC_USB30_PRIM_BCR>;
993 
994                         interconnects = <&system_noc MASTER_USB3 QCOM_ICC_TAG_ALWAYS
995                                          &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
996                                         <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
997                                          &system_noc SLAVE_USB3_0 QCOM_ICC_TAG_ALWAYS>;
998 
999                         interconnect-names = "usb-ddr",
1000                                              "apps-usb";
1001 
1002                         status = "disabled";
1003 
1004                         usb_1_dwc3: usb@a600000 {
1005                                 compatible = "snps,dwc3";
1006                                 reg = <0 0x0a600000 0 0xcd00>;
1007                                 interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
1008 
1009                                 iommus = <&apps_smmu 0xc0 0x0>;
1010                                 snps,dis_u2_susphy_quirk;
1011                                 snps,dis_enblslpm_quirk;
1012                                 phys = <&usb_1_hsphy>,
1013                                        <&usb_1_qmpphy>;
1014                                 phy-names = "usb2-phy",
1015                                             "usb3-phy";
1016 
1017                                 ports {
1018                                         #address-cells = <1>;
1019                                         #size-cells = <0>;
1020 
1021                                         port@0 {
1022                                                 reg = <0>;
1023 
1024                                                 usb_1_dwc3_hs: endpoint {
1025                                                 };
1026                                         };
1027 
1028                                         port@1 {
1029                                                 reg = <1>;
1030 
1031                                                 usb_1_dwc3_ss: endpoint {
1032                                                 };
1033                                         };
1034                                 };
1035                         };
1036                 };
1037 
1038                 pdc: interrupt-controller@b220000 {
1039                         compatible = "qcom,qdu1000-pdc", "qcom,pdc";
1040                         reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
1041                         qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
1042                                           <94 609 31>, <125 63 1>;
1043                         #interrupt-cells = <2>;
1044                         interrupt-parent = <&intc>;
1045                         interrupt-controller;
1046                 };
1047 
1048                 spmi_bus: spmi@c400000 {
1049                         compatible = "qcom,spmi-pmic-arb";
1050                         reg = <0x0 0xc400000 0x0 0x3000>,
1051                               <0x0 0xc500000 0x0 0x400000>,
1052                               <0x0 0xc440000 0x0 0x80000>,
1053                               <0x0 0xc4c0000 0x0 0x10000>,
1054                               <0x0 0xc42d000 0x0 0x4000>;
1055                         reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
1056                         interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
1057                         interrupt-names = "periph_irq";
1058                         qcom,ee = <0>;
1059                         qcom,channel = <0>;
1060                         #address-cells = <2>;
1061                         #size-cells = <0>;
1062                         interrupt-controller;
1063                         #interrupt-cells = <4>;
1064                 };
1065 
1066                 tlmm: pinctrl@f000000 {
1067                         compatible = "qcom,qdu1000-tlmm";
1068                         reg = <0x0 0xf000000 0x0 0x1000000>;
1069                         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
1070                         gpio-controller;
1071                         #gpio-cells = <2>;
1072                         interrupt-controller;
1073                         #interrupt-cells = <2>;
1074                         gpio-ranges = <&tlmm 0 0 151>;
1075                         wakeup-parent = <&pdc>;
1076 
1077                         qup_uart0_default: qup-uart0-default-state {
1078                                 pins = "gpio6", "gpio7", "gpio8", "gpio9";
1079                                 function = "qup00";
1080                         };
1081 
1082                         qup_i2c1_data_clk: qup-i2c1-data-clk-state {
1083                                 pins = "gpio10", "gpio11";
1084                                 function = "qup01";
1085                         };
1086 
1087                         qup_spi1_data_clk: qup-spi1-data-clk-state {
1088                                 pins = "gpio10", "gpio11", "gpio12";
1089                                 function = "qup01";
1090                         };
1091 
1092                         qup_spi1_cs: qup-spi1-cs-state {
1093                                 pins = "gpio13";
1094                                 function = "gpio";
1095                         };
1096 
1097                         qup_i2c2_data_clk: qup-i2c2-data-clk-state {
1098                                 pins = "gpio12", "gpio13";
1099                                 function = "qup02";
1100                         };
1101 
1102                         qup_spi2_data_clk: qup-spi2-data-clk-state {
1103                                 pins = "gpio12", "gpio13", "gpio10";
1104                                 function = "qup02";
1105                         };
1106 
1107                         qup_spi2_cs: qup-spi2-cs-state {
1108                                 pins = "gpio11";
1109                                 function = "gpio";
1110                         };
1111 
1112                         qup_i2c3_data_clk: qup-i2c3-data-clk-state {
1113                                 pins = "gpio14", "gpio15";
1114                                 function = "qup03";
1115                         };
1116 
1117                         qup_spi3_data_clk: qup-spi3-data-clk-state {
1118                                 pins = "gpio14", "gpio15", "gpio16";
1119                                 function = "qup03";
1120                         };
1121 
1122                         qup_spi3_cs: qup-spi3-cs-state {
1123                                 pins = "gpio17";
1124                                 function = "gpio";
1125                         };
1126 
1127                         qup_i2c4_data_clk: qup-i2c4-data-clk-state {
1128                                 pins = "gpio16", "gpio17";
1129                                 function = "qup04";
1130                         };
1131 
1132                         qup_spi4_data_clk: qup-spi4-data-clk-state {
1133                                 pins = "gpio16", "gpio17", "gpio14";
1134                                 function = "qup04";
1135                         };
1136 
1137                         qup_spi4_cs: qup-spi4-cs-state {
1138                                 pins = "gpio15";
1139                                 function = "gpio";
1140                         };
1141 
1142                         qup_i2c5_data_clk: qup-i2c5-data-clk-state {
1143                                 pins = "gpio130", "gpio131";
1144                                 function = "qup05";
1145                         };
1146 
1147                         qup_spi5_data_clk: qup-spi5-data-clk-state {
1148                                 pins = "gpio130", "gpio131", "gpio132";
1149                                 function = "qup05";
1150                         };
1151 
1152                         qup_spi5_cs: qup-spi5-cs-state {
1153                                 pins = "gpio133";
1154                                 function = "gpio";
1155                         };
1156 
1157                         qup_i2c6_data_clk: qup-i2c6-data-clk-state {
1158                                 pins = "gpio132", "gpio133";
1159                                 function = "qup06";
1160                         };
1161 
1162                         qup_spi6_data_clk: qup-spi6-data-clk-state {
1163                                 pins = "gpio132", "gpio133", "gpio130";
1164                                 function = "qup06";
1165                         };
1166 
1167                         qup_spi6_cs: qup-spi6-cs-state {
1168                                 pins = "gpio131";
1169                                 function = "gpio";
1170                         };
1171 
1172                         qup_uart7_rx: qup-uart7-rx-state {
1173                                 pins = "gpio135";
1174                                 function = "qup07";
1175                         };
1176 
1177                         qup_uart7_tx: qup-uart7-tx-state  {
1178                                 pins = "gpio134";
1179                                 function = "qup07";
1180                         };
1181 
1182                         qup_uart8_default: qup-uart8-default-state {
1183                                 pins = "gpio18", "gpio19", "gpio20", "gpio21";
1184                                 function = "qup10";
1185                         };
1186 
1187                         qup_i2c9_data_clk: qup-i2c9-data-clk-state {
1188                                 pins = "gpio22", "gpio23";
1189                                 function = "qup11";
1190                         };
1191 
1192                         qup_spi9_data_clk: qup-spi9-data-clk-state {
1193                                 pins = "gpio22", "gpio23", "gpio24";
1194                                 function = "qup11";
1195                         };
1196 
1197                         qup_spi9_cs: qup-spi9-cs-state {
1198                                 pins = "gpio25";
1199                                 function = "gpio";
1200                         };
1201 
1202                         qup_i2c10_data_clk: qup-i2c10-data-clk-state {
1203                                 pins = "gpio24", "gpio25";
1204                                 function = "qup12";
1205                         };
1206 
1207                         qup_spi10_data_clk: qup-spi10-data-clk-state {
1208                                 pins = "gpio24", "gpio25", "gpio22";
1209                                 function = "qup12";
1210                         };
1211 
1212                         qup_spi10_cs: qup-spi10-cs-state {
1213                                 pins = "gpio23";
1214                                 function = "gpio";
1215                         };
1216 
1217                         qup_i2c11_data_clk: qup-i2c11-data-clk-state {
1218                                 pins = "gpio26", "gpio27";
1219                                 function = "qup13";
1220                         };
1221 
1222                         qup_spi11_data_clk: qup-spi11-data-clk-state {
1223                                 pins = "gpio26", "gpio27", "gpio28";
1224                                 function = "qup13";
1225                         };
1226 
1227                         qup_spi11_cs: qup-spi11-cs-state {
1228                                 pins = "gpio29";
1229                                 function = "gpio";
1230                         };
1231 
1232                         qup_i2c12_data_clk: qup-i2c12-data-clk-state {
1233                                 pins = "gpio28", "gpio29";
1234                                 function = "qup14";
1235                         };
1236 
1237                         qup_spi12_data_clk: qup-spi12-data-clk-state {
1238                                 pins = "gpio28", "gpio29", "gpio26";
1239                                 function = "qup14";
1240                         };
1241 
1242                         qup_spi12_cs: qup-spi12-cs-state {
1243                                 pins = "gpio27";
1244                                 function = "gpio";
1245                         };
1246 
1247                         qup_i2c13_data_clk: qup-i2c13-data-clk-state {
1248                                 pins = "gpio30", "gpio31";
1249                                 function = "qup15";
1250                         };
1251 
1252                         qup_spi13_data_clk: qup-spi13-data-clk-state {
1253                                 pins = "gpio30", "gpio31", "gpio32";
1254                                 function = "qup15";
1255                         };
1256 
1257                         qup_spi13_cs: qup-spi13-cs-state {
1258                                 pins = "gpio33";
1259                                 function = "gpio";
1260                         };
1261 
1262                         qup_uart13_default: qup-uart13-default-state {
1263                                 pins = "gpio30", "gpio31", "gpio32", "gpio33";
1264                                 function = "qup15";
1265                         };
1266 
1267                         qup_i2c14_data_clk: qup-i2c14-data-clk-state {
1268                                 pins = "gpio34", "gpio35";
1269                                 function = "qup16";
1270                         };
1271 
1272                         qup_spi14_data_clk: qup-spi14-data-clk-state {
1273                                 pins = "gpio34", "gpio35", "gpio36";
1274                                 function = "qup16";
1275                         };
1276 
1277                         qup_spi14_cs: qup-spi14-cs-state {
1278                                 pins = "gpio37", "gpio38";
1279                                 function = "gpio";
1280                         };
1281 
1282                         qup_i2c15_data_clk: qup-i2c15-data-clk-state {
1283                                 pins = "gpio40", "gpio41";
1284                                 function = "qup17";
1285                         };
1286 
1287                         qup_spi15_data_clk: qup-spi15-data-clk-state {
1288                                 pins = "gpio40", "gpio41", "gpio30";
1289                                 function = "qup17";
1290                         };
1291 
1292                         qup_spi15_cs: qup-spi15-cs-state {
1293                                 pins = "gpio31";
1294                                 function = "gpio";
1295                         };
1296 
1297                         sdc_on_state: sdc-on-state {
1298                                 clk-pins {
1299                                         pins = "sdc1_clk";
1300                                         drive-strength = <16>;
1301                                         bias-disable;
1302                                 };
1303 
1304                                 cmd-pins {
1305                                         pins = "sdc1_cmd";
1306                                         drive-strength = <10>;
1307                                         bias-pull-up;
1308                                 };
1309 
1310                                 data-pins {
1311                                         pins = "sdc1_data";
1312                                         drive-strength = <10>;
1313                                         bias-pull-up;
1314                                 };
1315 
1316                                 rclk-pins {
1317                                         pins = "sdc1_rclk";
1318                                         bias-pull-down;
1319                                 };
1320                         };
1321 
1322                         sdc_off_state: sdc-off-state {
1323                                 clk-pins {
1324                                         pins = "sdc1_clk";
1325                                         drive-strength = <2>;
1326                                         bias-disable;
1327                                 };
1328 
1329                                 cmd-pins {
1330                                         pins = "sdc1_cmd";
1331                                         drive-strength = <2>;
1332                                         bias-pull-up;
1333                                 };
1334 
1335                                 data-pins {
1336                                         pins = "sdc1_data";
1337                                         drive-strength = <2>;
1338                                         bias-pull-up;
1339                                 };
1340 
1341                                 rclk-pins {
1342                                         pins = "sdc1_rclk";
1343                                         bias-pull-down;
1344                                 };
1345                         };
1346                 };
1347 
1348                 sram@14680000 {
1349                         compatible = "qcom,qdu1000-imem", "syscon", "simple-mfd";
1350                         reg = <0 0x14680000 0 0x1000>;
1351                         ranges = <0 0 0x14680000 0x1000>;
1352                         #address-cells = <1>;
1353                         #size-cells = <1>;
1354 
1355                         pil-reloc@94c {
1356                                 compatible = "qcom,pil-reloc-info";
1357                                 reg = <0x94c 0xc8>;
1358                         };
1359                 };
1360 
1361                 apps_smmu: iommu@15000000 {
1362                         compatible = "qcom,qdu1000-smmu-500", "qcom,smmu-500", "arm,mmu-500";
1363                         reg = <0x0 0x15000000 0x0 0x100000>;
1364                         #iommu-cells = <2>;
1365                         #global-interrupts = <2>;
1366                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
1367                                      <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
1368                                      <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
1369                                      <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
1370                                      <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
1371                                      <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
1372                                      <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
1373                                      <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
1374                                      <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
1375                                      <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
1376                                      <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
1377                                      <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
1378                                      <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
1379                                      <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
1380                                      <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
1381                                      <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
1382                                      <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
1383                                      <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
1384                                      <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
1385                                      <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
1386                                      <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
1387                                      <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
1388                                      <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
1389                                      <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
1390                                      <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
1391                                      <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
1392                                      <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
1393                                      <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
1394                                      <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
1395                                      <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
1396                                      <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
1397                                      <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
1398                                      <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
1399                                      <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
1400                                      <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
1401                                      <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
1402                                      <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
1403                                      <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
1404                                      <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
1405                                      <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
1406                                      <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
1407                                      <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
1408                                      <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
1409                                      <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
1410                                      <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
1411                                      <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
1412                                      <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
1413                                      <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
1414                                      <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
1415                 };
1416 
1417                 intc: interrupt-controller@17200000 {
1418                         compatible = "arm,gic-v3";
1419                         reg = <0x0 0x17200000 0x0 0x10000>,     /* GICD */
1420                               <0x0 0x17260000 0x0 0x80000>;     /* GICR * 4 */
1421                         interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
1422                         #interrupt-cells = <3>;
1423                         interrupt-controller;
1424                         #redistributor-regions = <1>;
1425                         redistributor-stride = <0x0 0x20000>;
1426                 };
1427 
1428                 timer@17420000 {
1429                         compatible = "arm,armv7-timer-mem";
1430                         reg = <0x0 0x17420000 0x0 0x1000>;
1431                         #address-cells = <1>;
1432                         #size-cells = <1>;
1433                         ranges = <0x0 0x0 0x0 0x20000000>;
1434 
1435                         frame@17421000 {
1436                                 reg = <0x17421000 0x1000>,
1437                                       <0x17422000 0x1000>;
1438                                 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
1439                                              <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
1440                                 frame-number = <0>;
1441                         };
1442 
1443                         frame@17423000 {
1444                                 reg = <0x17423000 0x1000>;
1445                                 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
1446                                 frame-number = <1>;
1447                                 status = "disabled";
1448                         };
1449 
1450                         frame@17425000 {
1451                                 reg = <0x17425000 0x1000>,
1452                                       <0x17426000 0x1000>;
1453                                 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
1454                                 frame-number = <2>;
1455                                 status = "disabled";
1456                         };
1457 
1458                         frame@17427000 {
1459                                 reg = <0x17427000 0x1000>;
1460                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
1461                                 frame-number = <3>;
1462                                 status = "disabled";
1463                         };
1464 
1465                         frame@17429000 {
1466                                 reg = <0x17429000 0x1000>;
1467                                 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
1468                                 frame-number = <4>;
1469                                 status = "disabled";
1470                         };
1471 
1472                         frame@1742b000 {
1473                                 reg = <0x1742b000 0x1000>;
1474                                 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
1475                                 frame-number = <5>;
1476                                 status = "disabled";
1477                         };
1478 
1479                         frame@1742d000 {
1480                                 reg = <0x1742d000 0x1000>;
1481                                 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
1482                                 frame-number = <6>;
1483                                 status = "disabled";
1484                         };
1485                 };
1486 
1487                 apps_rsc: rsc@17a00000 {
1488                         compatible = "qcom,rpmh-rsc";
1489                         reg = <0x0 0x17a00000 0x0 0x10000>,
1490                               <0x0 0x17a10000 0x0 0x10000>,
1491                               <0x0 0x17a20000 0x0 0x10000>;
1492                         reg-names = "drv-0", "drv-1", "drv-2";
1493                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
1494                                      <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
1495                                      <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
1496                         qcom,tcs-offset = <0xd00>;
1497                         qcom,drv-id = <2>;
1498                         qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
1499                                           <WAKE_TCS      3>, <CONTROL_TCS   0>;
1500                         label = "apps_rsc";
1501                         power-domains = <&CLUSTER_PD>;
1502 
1503                         apps_bcm_voter: bcm-voter {
1504                                 compatible = "qcom,bcm-voter";
1505                         };
1506 
1507                         rpmhcc: clock-controller {
1508                                 compatible = "qcom,qdu1000-rpmh-clk";
1509                                 clocks = <&xo_board>;
1510                                 clock-names = "xo";
1511                                 #clock-cells = <1>;
1512                         };
1513 
1514                         rpmhpd: power-controller {
1515                                 compatible = "qcom,qdu1000-rpmhpd";
1516                                 #power-domain-cells = <1>;
1517                                 operating-points-v2 = <&rpmhpd_opp_table>;
1518 
1519                                 rpmhpd_opp_table: opp-table {
1520                                         compatible = "operating-points-v2";
1521 
1522                                         rpmhpd_opp_ret: opp1 {
1523                                                 opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
1524                                         };
1525 
1526                                         rpmhpd_opp_min_svs: opp2 {
1527                                                 opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
1528                                         };
1529 
1530                                         rpmhpd_opp_low_svs: opp3 {
1531                                                 opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
1532                                         };
1533 
1534                                         rpmhpd_opp_svs: opp4 {
1535                                                 opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
1536                                         };
1537 
1538                                         rpmhpd_opp_svs_l1: opp5 {
1539                                                 opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
1540                                         };
1541 
1542                                         rpmhpd_opp_nom: opp6 {
1543                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
1544                                         };
1545 
1546                                         rpmhpd_opp_nom_l1: opp7 {
1547                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
1548                                         };
1549 
1550                                         rpmhpd_opp_nom_l2: opp8 {
1551                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
1552                                         };
1553 
1554                                         rpmhpd_opp_turbo: opp9 {
1555                                                 opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
1556                                         };
1557 
1558                                         rpmhpd_opp_turbo_l1: opp10 {
1559                                                 opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
1560                                         };
1561                                 };
1562                         };
1563                 };
1564 
1565                 cpufreq_hw: cpufreq@17d90000 {
1566                         compatible = "qcom,qdu1000-cpufreq-epss", "qcom,cpufreq-epss";
1567                         reg = <0x0 0x17d90000 0x0 0x1000>, <0x0 0x17d91000 0x0 0x1000>;
1568                         reg-names = "freq-domain0", "freq-domain1";
1569                         clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
1570                         clock-names = "xo", "alternate";
1571                         #freq-domain-cells = <1>;
1572                         #clock-cells = <1>;
1573                 };
1574 
1575                 gem_noc: interconnect@19100000 {
1576                         compatible = "qcom,qdu1000-gem-noc";
1577                         reg = <0x0 0x19100000 0x0 0xB8080>;
1578                         qcom,bcm-voters = <&apps_bcm_voter>;
1579                         #interconnect-cells = <2>;
1580                 };
1581 
1582                 system-cache-controller@19200000 {
1583                         compatible = "qcom,qdu1000-llcc";
1584                         reg = <0 0x19200000 0 0x80000>,
1585                               <0 0x19300000 0 0x80000>,
1586                               <0 0x19600000 0 0x80000>,
1587                               <0 0x19700000 0 0x80000>,
1588                               <0 0x19a00000 0 0x80000>,
1589                               <0 0x19b00000 0 0x80000>,
1590                               <0 0x19e00000 0 0x80000>,
1591                               <0 0x19f00000 0 0x80000>,
1592                               <0 0x1a200000 0 0x80000>;
1593                         reg-names = "llcc0_base",
1594                                     "llcc1_base",
1595                                     "llcc2_base",
1596                                     "llcc3_base",
1597                                     "llcc4_base",
1598                                     "llcc5_base",
1599                                     "llcc6_base",
1600                                     "llcc7_base",
1601                                     "llcc_broadcast_base";
1602                         interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
1603 
1604                         nvmem-cells = <&multi_chan_ddr>;
1605                         nvmem-cell-names = "multi-chan-ddr";
1606                 };
1607 
1608                 sec_qfprom: efuse@221c8000 {
1609                         compatible = "qcom,qdu1000-sec-qfprom", "qcom,sec-qfprom";
1610                         reg = <0 0x221c8000 0 0x1000>;
1611                         #address-cells = <1>;
1612                         #size-cells = <1>;
1613 
1614                         multi_chan_ddr: multi-chan-ddr@12b {
1615                                 reg = <0x12b 0x1>;
1616                                 bits = <0 2>;
1617                         };
1618                 };
1619         };
1620 
1621         timer {
1622                 compatible = "arm,armv8-timer";
1623                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
1624                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
1625                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
1626                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
1627                              <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
1628         };
1629 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php