1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2021, The Linux Foundation. All rights reserved.
4 * Copyright (c) 2022, Linaro Limited
5 */
6
7 /dts-v1/;
8
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
11 #include <dt-bindings/spmi/spmi.h>
12
13 #include "sa8540p.dtsi"
14 #include "sa8540p-pmics.dtsi"
15
16 / {
17 model = "Qualcomm SA8295P ADP";
18 compatible = "qcom,sa8295p-adp", "qcom,sa8540p";
19
20 aliases {
21 serial0 = &uart17;
22 };
23
24 chosen {
25 stdout-path = "serial0:115200n8";
26 };
27
28 dp2-connector {
29 compatible = "dp-connector";
30 label = "DP2";
31 type = "mini";
32
33 hpd-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
34
35 port {
36 dp2_connector_in: endpoint {
37 remote-endpoint = <&mdss1_dp0_phy_out>;
38 };
39 };
40 };
41
42 dp3-connector {
43 compatible = "dp-connector";
44 label = "DP3";
45 type = "mini";
46
47 hpd-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
48
49 port {
50 dp3_connector_in: endpoint {
51 remote-endpoint = <&mdss1_dp1_phy_out>;
52 };
53 };
54 };
55
56 edp0-connector {
57 compatible = "dp-connector";
58 label = "EDP0";
59 type = "mini";
60
61 hpd-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
62
63 port {
64 edp0_connector_in: endpoint {
65 remote-endpoint = <&mdss0_dp2_phy_out>;
66 };
67 };
68 };
69
70 edp1-connector {
71 compatible = "dp-connector";
72 label = "EDP1";
73 type = "mini";
74
75 hpd-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
76
77 port {
78 edp1_connector_in: endpoint {
79 remote-endpoint = <&mdss0_dp3_phy_out>;
80 };
81 };
82 };
83
84 edp2-connector {
85 compatible = "dp-connector";
86 label = "EDP2";
87 type = "mini";
88
89 hpd-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
90
91 port {
92 edp2_connector_in: endpoint {
93 remote-endpoint = <&mdss1_dp2_phy_out>;
94 };
95 };
96 };
97
98 edp3-connector {
99 compatible = "dp-connector";
100 label = "EDP3";
101 type = "mini";
102
103 hpd-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
104
105 port {
106 edp3_connector_in: endpoint {
107 remote-endpoint = <&mdss1_dp3_phy_out>;
108 };
109 };
110 };
111
112 reserved-memory {
113 gpu_mem: gpu-mem@8bf00000 {
114 reg = <0 0x8bf00000 0 0x2000>;
115 no-map;
116 };
117 };
118 };
119
120 &apps_rsc {
121 regulators-0 {
122 compatible = "qcom,pm8150-rpmh-regulators";
123 qcom,pmic-id = "a";
124
125 vreg_l3a: ldo3 {
126 regulator-name = "vreg_l3a";
127 regulator-min-microvolt = <1200000>;
128 regulator-max-microvolt = <1208000>;
129 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
130 };
131
132 vreg_l5a: ldo5 {
133 regulator-name = "vreg_l5a";
134 regulator-min-microvolt = <912000>;
135 regulator-max-microvolt = <912000>;
136 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
137 };
138
139 vreg_l7a: ldo7 {
140 regulator-name = "vreg_l7a";
141 regulator-min-microvolt = <1800000>;
142 regulator-max-microvolt = <1800000>;
143 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
144 };
145
146 vreg_l13a: ldo13 {
147 regulator-name = "vreg_l13a";
148 regulator-min-microvolt = <3072000>;
149 regulator-max-microvolt = <3072000>;
150 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
151 };
152
153 vreg_l11a: ldo11 {
154 regulator-name = "vreg_l11a";
155 regulator-min-microvolt = <880000>;
156 regulator-max-microvolt = <880000>;
157 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
158 };
159 };
160
161 regulators-1 {
162 compatible = "qcom,pm8150-rpmh-regulators";
163 qcom,pmic-id = "c";
164
165 vreg_l1c: ldo1 {
166 regulator-name = "vreg_l1c";
167 regulator-min-microvolt = <912000>;
168 regulator-max-microvolt = <912000>;
169 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
170 };
171
172 vreg_l2c: ldo2 {
173 regulator-name = "vreg_l2c";
174 regulator-min-microvolt = <3072000>;
175 regulator-max-microvolt = <3072000>;
176 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
177 };
178
179 vreg_l3c: ldo3 {
180 regulator-name = "vreg_l3c";
181 regulator-min-microvolt = <1200000>;
182 regulator-max-microvolt = <1200000>;
183 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
184 regulator-allow-set-load;
185 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
186 RPMH_REGULATOR_MODE_HPM>;
187 };
188
189 vreg_l4c: ldo4 {
190 regulator-name = "vreg_l4c";
191 regulator-min-microvolt = <1200000>;
192 regulator-max-microvolt = <1208000>;
193 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
194 };
195
196 vreg_l6c: ldo6 {
197 regulator-name = "vreg_l6c";
198 regulator-min-microvolt = <1200000>;
199 regulator-max-microvolt = <1200000>;
200 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
201 regulator-allow-set-load;
202 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
203 RPMH_REGULATOR_MODE_HPM>;
204 };
205
206 vreg_l7c: ldo7 {
207 regulator-name = "vreg_l7c";
208 regulator-min-microvolt = <1800000>;
209 regulator-max-microvolt = <1800000>;
210 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
211 };
212
213 vreg_l10c: ldo10 {
214 regulator-name = "vreg_l10c";
215 regulator-min-microvolt = <2504000>;
216 regulator-max-microvolt = <2504000>;
217 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
218 regulator-allow-set-load;
219 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
220 RPMH_REGULATOR_MODE_HPM>;
221 };
222
223 vreg_l17c: ldo17 {
224 regulator-name = "vreg_l17c";
225 regulator-min-microvolt = <2504000>;
226 regulator-max-microvolt = <2504000>;
227 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
228 regulator-allow-set-load;
229 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
230 RPMH_REGULATOR_MODE_HPM>;
231 };
232 };
233
234 regulators-2 {
235 compatible = "qcom,pm8150-rpmh-regulators";
236 qcom,pmic-id = "g";
237
238 vreg_l3g: ldo3 {
239 regulator-name = "vreg_l3g";
240 regulator-min-microvolt = <1200000>;
241 regulator-max-microvolt = <1200000>;
242 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
243 };
244
245 vreg_l7g: ldo7 {
246 regulator-name = "vreg_l7g";
247 regulator-min-microvolt = <1800000>;
248 regulator-max-microvolt = <1800000>;
249 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
250 };
251
252 vreg_l8g: ldo8 {
253 regulator-name = "vreg_l8g";
254 regulator-min-microvolt = <912000>;
255 regulator-max-microvolt = <912000>;
256 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
257 };
258
259 vreg_l11g: ldo11 {
260 regulator-name = "vreg_l11g";
261 regulator-min-microvolt = <912000>;
262 regulator-max-microvolt = <912000>;
263 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
264 };
265 };
266 };
267
268 &dispcc0 {
269 status = "okay";
270 };
271
272 &dispcc1 {
273 status = "okay";
274 };
275
276 &i2c12 {
277 pinctrl-0 = <&qup1_i2c4_state>;
278 pinctrl-names = "default";
279
280 status = "okay";
281
282 vdd_gfx: regulator@39 {
283 compatible = "maxim,max20411";
284 reg = <0x39>;
285
286 regulator-min-microvolt = <800000>;
287 regulator-max-microvolt = <800000>;
288
289 enable-gpios = <&pmm8540a_gpios 2 GPIO_ACTIVE_HIGH>;
290
291 pinctrl-0 = <&max20411_en>;
292 pinctrl-names = "default";
293 };
294 };
295
296 &gpucc {
297 vdd-gfx-supply = <&vdd_gfx>;
298 status = "okay";
299 };
300
301 &gmu {
302 status = "okay";
303 };
304
305 &gpu {
306 status = "okay";
307
308 zap-shader {
309 memory-region = <&gpu_mem>;
310 firmware-name = "qcom/sa8295p/a690_zap.mbn";
311 };
312 };
313
314 &gpu_smmu {
315 status = "okay";
316 };
317
318 &mdss0 {
319 status = "okay";
320 };
321
322 &mdss0_dp2 {
323 data-lanes = <0 1 2 3>;
324
325 status = "okay";
326
327 ports {
328 port@1 {
329 reg = <1>;
330 mdss0_dp2_phy_out: endpoint {
331 remote-endpoint = <&edp0_connector_in>;
332 };
333 };
334 };
335 };
336
337 &mdss0_dp2_phy {
338 vdda-phy-supply = <&vreg_l8g>;
339 vdda-pll-supply = <&vreg_l3g>;
340
341 status = "okay";
342 };
343
344 &mdss0_dp3 {
345 data-lanes = <0 1 2 3>;
346
347 status = "okay";
348
349 ports {
350 port@1 {
351 reg = <1>;
352 mdss0_dp3_phy_out: endpoint {
353 remote-endpoint = <&edp1_connector_in>;
354 };
355 };
356 };
357 };
358
359 &mdss0_dp3_phy {
360 vdda-phy-supply = <&vreg_l8g>;
361 vdda-pll-supply = <&vreg_l3g>;
362
363 status = "okay";
364 };
365
366 &mdss1 {
367 status = "okay";
368 };
369
370 &mdss1_dp0 {
371 data-lanes = <0 1 2 3>;
372
373 status = "okay";
374
375 ports {
376 port@1 {
377 reg = <1>;
378 mdss1_dp0_phy_out: endpoint {
379 remote-endpoint = <&dp2_connector_in>;
380 };
381 };
382 };
383 };
384
385 &mdss1_dp0_phy {
386 vdda-phy-supply = <&vreg_l11g>;
387 vdda-pll-supply = <&vreg_l3g>;
388
389 status = "okay";
390 };
391
392 &mdss1_dp1 {
393 data-lanes = <0 1 2 3>;
394
395 status = "okay";
396
397 ports {
398 port@1 {
399 reg = <1>;
400 mdss1_dp1_phy_out: endpoint {
401 remote-endpoint = <&dp3_connector_in>;
402 };
403 };
404 };
405 };
406
407 &mdss1_dp1_phy {
408 vdda-phy-supply = <&vreg_l11g>;
409 vdda-pll-supply = <&vreg_l3g>;
410
411 status = "okay";
412 };
413
414 &mdss1_dp2 {
415 data-lanes = <0 1 2 3>;
416
417 status = "okay";
418
419 ports {
420 port@1 {
421 reg = <1>;
422 mdss1_dp2_phy_out: endpoint {
423 remote-endpoint = <&edp2_connector_in>;
424 };
425 };
426 };
427 };
428
429 &mdss1_dp2_phy {
430 vdda-phy-supply = <&vreg_l11g>;
431 vdda-pll-supply = <&vreg_l3g>;
432
433 status = "okay";
434 };
435
436 &mdss1_dp3 {
437 data-lanes = <0 1 2 3>;
438
439 status = "okay";
440
441 ports {
442 port@1 {
443 reg = <1>;
444 mdss1_dp3_phy_out: endpoint {
445 remote-endpoint = <&edp3_connector_in>;
446 };
447 };
448 };
449 };
450
451 &mdss1_dp3_phy {
452 vdda-phy-supply = <&vreg_l11g>;
453 vdda-pll-supply = <&vreg_l3g>;
454
455 status = "okay";
456 };
457
458 &pcie2a {
459 perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
460 wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
461
462 pinctrl-names = "default";
463 pinctrl-0 = <&pcie2a_default>;
464
465 status = "okay";
466 };
467
468 &pcie2a_phy {
469 vdda-phy-supply = <&vreg_l11a>;
470 vdda-pll-supply = <&vreg_l3a>;
471
472 status = "okay";
473 };
474
475 &pcie3a {
476 num-lanes = <2>;
477
478 perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
479 wake-gpios = <&tlmm 56 GPIO_ACTIVE_LOW>;
480
481 pinctrl-names = "default";
482 pinctrl-0 = <&pcie3a_default>;
483
484 status = "okay";
485 };
486
487 &pcie3a_phy {
488 vdda-phy-supply = <&vreg_l11a>;
489 vdda-pll-supply = <&vreg_l3a>;
490
491 status = "okay";
492 };
493
494 &pcie3b {
495 perst-gpios = <&tlmm 153 GPIO_ACTIVE_LOW>;
496 wake-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
497
498 pinctrl-names = "default";
499 pinctrl-0 = <&pcie3b_default>;
500
501 status = "okay";
502 };
503
504 &pcie3b_phy {
505 vdda-phy-supply = <&vreg_l11a>;
506 vdda-pll-supply = <&vreg_l3a>;
507
508 status = "okay";
509 };
510
511 &pcie4 {
512 perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
513 wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
514
515 pinctrl-names = "default";
516 pinctrl-0 = <&pcie4_default>;
517
518 status = "okay";
519 };
520
521 &pcie4_phy {
522 vdda-phy-supply = <&vreg_l11a>;
523 vdda-pll-supply = <&vreg_l3a>;
524
525 status = "okay";
526 };
527
528 &qup1 {
529 status = "okay";
530 };
531
532 &qup2 {
533 status = "okay";
534 };
535
536 &remoteproc_adsp {
537 firmware-name = "qcom/sa8540p/adsp.mbn";
538 status = "okay";
539 };
540
541 &remoteproc_nsp0 {
542 firmware-name = "qcom/sa8540p/cdsp.mbn";
543 status = "okay";
544 };
545
546 &remoteproc_nsp1 {
547 firmware-name = "qcom/sa8540p/cdsp1.mbn";
548 status = "okay";
549 };
550
551 &uart17 {
552 compatible = "qcom,geni-debug-uart";
553 status = "okay";
554 };
555
556 &ufs_mem_hc {
557 reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
558
559 vcc-supply = <&vreg_l17c>;
560 vcc-max-microamp = <800000>;
561 vccq-supply = <&vreg_l6c>;
562 vccq-max-microamp = <900000>;
563
564 status = "okay";
565 };
566
567 &ufs_mem_phy {
568 vdda-phy-supply = <&vreg_l8g>;
569 vdda-pll-supply = <&vreg_l3g>;
570
571 status = "okay";
572 };
573
574 &ufs_card_hc {
575 reset-gpios = <&tlmm 229 GPIO_ACTIVE_LOW>;
576
577 vcc-supply = <&vreg_l10c>;
578 vcc-max-microamp = <800000>;
579 vccq-supply = <&vreg_l3c>;
580 vccq-max-microamp = <900000>;
581
582 status = "okay";
583 };
584
585 &ufs_card_phy {
586 vdda-phy-supply = <&vreg_l8g>;
587 vdda-pll-supply = <&vreg_l3g>;
588
589 status = "okay";
590 };
591
592 &usb_0 {
593 status = "okay";
594 };
595
596 &usb_0_dwc3 {
597 /* TODO: Define USB-C connector properly */
598 dr_mode = "peripheral";
599 };
600
601 &usb_0_hsphy {
602 vdda-pll-supply = <&vreg_l5a>;
603 vdda18-supply = <&vreg_l7a>;
604 vdda33-supply = <&vreg_l13a>;
605
606 status = "okay";
607 };
608
609 &usb_0_qmpphy {
610 vdda-phy-supply = <&vreg_l3a>;
611 vdda-pll-supply = <&vreg_l5a>;
612
613 status = "okay";
614 };
615
616 &usb_1 {
617 status = "okay";
618 };
619
620 &usb_1_dwc3 {
621 /* TODO: Define USB-C connector properly */
622 dr_mode = "host";
623 };
624
625 &usb_1_hsphy {
626 vdda-pll-supply = <&vreg_l1c>;
627 vdda18-supply = <&vreg_l7c>;
628 vdda33-supply = <&vreg_l2c>;
629
630 status = "okay";
631 };
632
633 &usb_1_qmpphy {
634 vdda-phy-supply = <&vreg_l4c>;
635 vdda-pll-supply = <&vreg_l1c>;
636
637 status = "okay";
638 };
639
640 &usb_2_hsphy0 {
641 vdda-pll-supply = <&vreg_l5a>;
642 vdda18-supply = <&vreg_l7g>;
643 vdda33-supply = <&vreg_l13a>;
644
645 status = "okay";
646 };
647
648 &usb_2_hsphy1 {
649 vdda-pll-supply = <&vreg_l5a>;
650 vdda18-supply = <&vreg_l7g>;
651 vdda33-supply = <&vreg_l13a>;
652
653 status = "okay";
654 };
655
656 &usb_2_hsphy2 {
657 vdda-pll-supply = <&vreg_l5a>;
658 vdda18-supply = <&vreg_l7g>;
659 vdda33-supply = <&vreg_l13a>;
660
661 status = "okay";
662 };
663
664 &usb_2_hsphy3 {
665 vdda-pll-supply = <&vreg_l5a>;
666 vdda18-supply = <&vreg_l7g>;
667 vdda33-supply = <&vreg_l13a>;
668
669 status = "okay";
670 };
671
672 &usb_2_qmpphy0 {
673 vdda-phy-supply = <&vreg_l3a>;
674 vdda-pll-supply = <&vreg_l5a>;
675
676 status = "okay";
677 };
678
679 &usb_2_qmpphy1 {
680 vdda-phy-supply = <&vreg_l3a>;
681 vdda-pll-supply = <&vreg_l5a>;
682
683 status = "okay";
684 };
685
686 &xo_board_clk {
687 clock-frequency = <38400000>;
688 };
689
690 /* PINCTRL */
691
692 &pmm8540a_gpios {
693 max20411_en: max20411-en-state {
694 pins = "gpio2";
695 function = "normal";
696 output-enable;
697 };
698 };
699
700 &tlmm {
701 pcie2a_default: pcie2a-default-state {
702 clkreq-n-pins {
703 pins = "gpio142";
704 function = "pcie2a_clkreq";
705 drive-strength = <2>;
706 bias-pull-up;
707 };
708
709 perst-n-pins {
710 pins = "gpio143";
711 function = "gpio";
712 drive-strength = <2>;
713 bias-pull-down;
714 };
715
716 wake-n-pins {
717 pins = "gpio145";
718 function = "gpio";
719 drive-strength = <2>;
720 bias-pull-up;
721 };
722 };
723
724 pcie3a_default: pcie3a-default-state {
725 clkreq-n-pins {
726 pins = "gpio150";
727 function = "pcie3a_clkreq";
728 drive-strength = <2>;
729 bias-pull-up;
730 };
731
732 perst-n-pins {
733 pins = "gpio151";
734 function = "gpio";
735 drive-strength = <2>;
736 bias-pull-down;
737 };
738
739 wake-n-pins {
740 pins = "gpio56";
741 function = "gpio";
742 drive-strength = <2>;
743 bias-pull-up;
744 };
745 };
746
747 pcie3b_default: pcie3b-default-state {
748 clkreq-n-pins {
749 pins = "gpio152";
750 function = "pcie3b_clkreq";
751 drive-strength = <2>;
752 bias-pull-up;
753 };
754
755 perst-n-pins {
756 pins = "gpio153";
757 function = "gpio";
758 drive-strength = <2>;
759 bias-pull-down;
760 };
761
762 wake-n-pins {
763 pins = "gpio130";
764 function = "gpio";
765 drive-strength = <2>;
766 bias-pull-up;
767 };
768 };
769
770 pcie4_default: pcie4-default-state {
771 clkreq-n-pins {
772 pins = "gpio140";
773 function = "pcie4_clkreq";
774 drive-strength = <2>;
775 bias-pull-up;
776 };
777
778 perst-n-pins {
779 pins = "gpio141";
780 function = "gpio";
781 drive-strength = <2>;
782 bias-pull-down;
783 };
784
785 wake-n-pins {
786 pins = "gpio139";
787 function = "gpio";
788 drive-strength = <2>;
789 bias-pull-up;
790 };
791 };
792
793 qup1_i2c4_state: qup1-i2c4-state {
794 pins = "gpio0", "gpio1";
795 function = "qup12";
796 drive-strength = <2>;
797 bias-pull-up;
798 };
799 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.