1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * SDM845 MTP board device tree source
4 *
5 * Copyright (c) 2018, The Linux Foundation. All rights reserved.
6 */
7
8 /dts-v1/;
9
10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
11 #include "sdm845.dtsi"
12 #include "pm8998.dtsi"
13 #include "pmi8998.dtsi"
14
15 / {
16 model = "Qualcomm Technologies, Inc. SDM845 MTP";
17 compatible = "qcom,sdm845-mtp", "qcom,sdm845";
18 chassis-type = "handset";
19
20 aliases {
21 serial0 = &uart9;
22 };
23
24 chosen {
25 stdout-path = "serial0:115200n8";
26 };
27
28 vph_pwr: vph-pwr-regulator {
29 compatible = "regulator-fixed";
30 regulator-name = "vph_pwr";
31 regulator-min-microvolt = <3700000>;
32 regulator-max-microvolt = <3700000>;
33 };
34
35 /*
36 * Apparently RPMh does not provide support for PM8998 S4 because it
37 * is always-on; model it as a fixed regulator.
38 */
39 vreg_s4a_1p8: pm8998-smps4 {
40 compatible = "regulator-fixed";
41 regulator-name = "vreg_s4a_1p8";
42
43 regulator-min-microvolt = <1800000>;
44 regulator-max-microvolt = <1800000>;
45
46 regulator-always-on;
47 regulator-boot-on;
48
49 vin-supply = <&vph_pwr>;
50 };
51
52 thermal-zones {
53 xo_thermal: xo-thermal {
54 thermal-sensors = <&pm8998_adc_tm 1>;
55
56 trips {
57 trip-point {
58 temperature = <125000>;
59 hysteresis = <10000>;
60 type = "passive";
61 };
62 };
63 };
64
65 msm_thermal: msm-thermal {
66 thermal-sensors = <&pm8998_adc_tm 2>;
67
68 trips {
69 trip-point {
70 temperature = <125000>;
71 hysteresis = <10000>;
72 type = "passive";
73 };
74 };
75 };
76
77 pa_thermal: pa-thermal {
78 thermal-sensors = <&pm8998_adc_tm 3>;
79
80 trips {
81 trip-point {
82 temperature = <125000>;
83 hysteresis = <10000>;
84 type = "passive";
85 };
86 };
87 };
88
89 quiet_thermal: quiet-thermal {
90 thermal-sensors = <&pm8998_adc_tm 4>;
91
92 trips {
93 trip-point {
94 temperature = <125000>;
95 hysteresis = <10000>;
96 type = "passive";
97 };
98 };
99 };
100 };
101 };
102
103 &adsp_pas {
104 status = "okay";
105 firmware-name = "qcom/sdm845/adsp.mbn";
106 };
107
108 &apps_rsc {
109 regulators-0 {
110 compatible = "qcom,pm8998-rpmh-regulators";
111 qcom,pmic-id = "a";
112
113 vdd-s1-supply = <&vph_pwr>;
114 vdd-s2-supply = <&vph_pwr>;
115 vdd-s3-supply = <&vph_pwr>;
116 vdd-s4-supply = <&vph_pwr>;
117 vdd-s5-supply = <&vph_pwr>;
118 vdd-s6-supply = <&vph_pwr>;
119 vdd-s7-supply = <&vph_pwr>;
120 vdd-s8-supply = <&vph_pwr>;
121 vdd-s9-supply = <&vph_pwr>;
122 vdd-s10-supply = <&vph_pwr>;
123 vdd-s11-supply = <&vph_pwr>;
124 vdd-s12-supply = <&vph_pwr>;
125 vdd-s13-supply = <&vph_pwr>;
126 vdd-l1-l27-supply = <&vreg_s7a_1p025>;
127 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
128 vdd-l3-l11-supply = <&vreg_s7a_1p025>;
129 vdd-l4-l5-supply = <&vreg_s7a_1p025>;
130 vdd-l6-supply = <&vph_pwr>;
131 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
132 vdd-l9-supply = <&vreg_bob>;
133 vdd-l10-l23-l25-supply = <&vreg_bob>;
134 vdd-l13-l19-l21-supply = <&vreg_bob>;
135 vdd-l16-l28-supply = <&vreg_bob>;
136 vdd-l18-l22-supply = <&vreg_bob>;
137 vdd-l20-l24-supply = <&vreg_bob>;
138 vdd-l26-supply = <&vreg_s3a_1p35>;
139 vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
140
141 vreg_s2a_1p125: smps2 {
142 regulator-min-microvolt = <1100000>;
143 regulator-max-microvolt = <1100000>;
144 };
145
146 vreg_s3a_1p35: smps3 {
147 regulator-min-microvolt = <1352000>;
148 regulator-max-microvolt = <1352000>;
149 };
150
151 vreg_s5a_2p04: smps5 {
152 regulator-min-microvolt = <1904000>;
153 regulator-max-microvolt = <2040000>;
154 };
155
156 vreg_s7a_1p025: smps7 {
157 regulator-min-microvolt = <900000>;
158 regulator-max-microvolt = <1028000>;
159 };
160
161 vdd_qusb_hs0:
162 vdda_hp_pcie_core:
163 vdda_mipi_csi0_0p9:
164 vdda_mipi_csi1_0p9:
165 vdda_mipi_csi2_0p9:
166 vdda_mipi_dsi0_pll:
167 vdda_mipi_dsi1_pll:
168 vdda_qlink_lv:
169 vdda_qlink_lv_ck:
170 vdda_qrefs_0p875:
171 vdda_pcie_core:
172 vdda_pll_cc_ebi01:
173 vdda_pll_cc_ebi23:
174 vdda_sp_sensor:
175 vdda_ufs1_core:
176 vdda_ufs2_core:
177 vdda_usb1_ss_core:
178 vdda_usb2_ss_core:
179 vreg_l1a_0p875: ldo1 {
180 regulator-min-microvolt = <880000>;
181 regulator-max-microvolt = <880000>;
182 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
183 };
184
185 vddpx_10:
186 vreg_l2a_1p2: ldo2 {
187 regulator-min-microvolt = <1200000>;
188 regulator-max-microvolt = <1200000>;
189 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
190 regulator-always-on;
191 };
192
193 vreg_l3a_1p0: ldo3 {
194 regulator-min-microvolt = <1000000>;
195 regulator-max-microvolt = <1000000>;
196 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
197 };
198
199 vdd_wcss_cx:
200 vdd_wcss_mx:
201 vdda_wcss_pll:
202 vreg_l5a_0p8: ldo5 {
203 regulator-min-microvolt = <800000>;
204 regulator-max-microvolt = <800000>;
205 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
206 };
207
208 vddpx_13:
209 vreg_l6a_1p8: ldo6 {
210 regulator-min-microvolt = <1856000>;
211 regulator-max-microvolt = <1856000>;
212 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
213 };
214
215 vreg_l7a_1p8: ldo7 {
216 regulator-min-microvolt = <1800000>;
217 regulator-max-microvolt = <1800000>;
218 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
219 };
220
221 vreg_l8a_1p2: ldo8 {
222 regulator-min-microvolt = <1200000>;
223 regulator-max-microvolt = <1248000>;
224 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
225 };
226
227 vreg_l9a_1p8: ldo9 {
228 regulator-min-microvolt = <1704000>;
229 regulator-max-microvolt = <2928000>;
230 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
231 };
232
233 vreg_l10a_1p8: ldo10 {
234 regulator-min-microvolt = <1704000>;
235 regulator-max-microvolt = <2928000>;
236 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
237 };
238
239 vreg_l11a_1p0: ldo11 {
240 regulator-min-microvolt = <1000000>;
241 regulator-max-microvolt = <1048000>;
242 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
243 };
244
245 vdd_qfprom:
246 vdd_qfprom_sp:
247 vdda_apc1_cs_1p8:
248 vdda_gfx_cs_1p8:
249 vdda_qrefs_1p8:
250 vdda_qusb_hs0_1p8:
251 vddpx_11:
252 vreg_l12a_1p8: ldo12 {
253 regulator-min-microvolt = <1800000>;
254 regulator-max-microvolt = <1800000>;
255 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
256 };
257
258 vddpx_2:
259 vreg_l13a_2p95: ldo13 {
260 regulator-min-microvolt = <1800000>;
261 regulator-max-microvolt = <2960000>;
262 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
263 };
264
265 vreg_l14a_1p88: ldo14 {
266 regulator-min-microvolt = <1800000>;
267 regulator-max-microvolt = <1800000>;
268 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
269 };
270
271 vreg_l15a_1p8: ldo15 {
272 regulator-min-microvolt = <1800000>;
273 regulator-max-microvolt = <1800000>;
274 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
275 };
276
277 vreg_l16a_2p7: ldo16 {
278 regulator-min-microvolt = <2704000>;
279 regulator-max-microvolt = <2704000>;
280 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
281 };
282
283 vreg_l17a_1p3: ldo17 {
284 regulator-min-microvolt = <1304000>;
285 regulator-max-microvolt = <1304000>;
286 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
287 };
288
289 vreg_l18a_2p7: ldo18 {
290 regulator-min-microvolt = <2704000>;
291 regulator-max-microvolt = <2960000>;
292 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
293 };
294
295 vreg_l19a_3p0: ldo19 {
296 regulator-min-microvolt = <2856000>;
297 regulator-max-microvolt = <3104000>;
298 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
299 };
300
301 vreg_l20a_2p95: ldo20 {
302 regulator-min-microvolt = <2704000>;
303 regulator-max-microvolt = <2960000>;
304 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
305 };
306
307 vreg_l21a_2p95: ldo21 {
308 regulator-min-microvolt = <2704000>;
309 regulator-max-microvolt = <2960000>;
310 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
311 };
312
313 vreg_l22a_2p85: ldo22 {
314 regulator-min-microvolt = <2864000>;
315 regulator-max-microvolt = <3312000>;
316 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
317 };
318
319 vreg_l23a_3p3: ldo23 {
320 regulator-min-microvolt = <3000000>;
321 regulator-max-microvolt = <3312000>;
322 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
323 };
324
325 vdda_qusb_hs0_3p1:
326 vreg_l24a_3p075: ldo24 {
327 regulator-min-microvolt = <3088000>;
328 regulator-max-microvolt = <3088000>;
329 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
330 };
331
332 vreg_l25a_3p3: ldo25 {
333 regulator-min-microvolt = <3300000>;
334 regulator-max-microvolt = <3312000>;
335 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
336 };
337
338 vdda_hp_pcie_1p2:
339 vdda_hv_ebi0:
340 vdda_hv_ebi1:
341 vdda_hv_ebi2:
342 vdda_hv_ebi3:
343 vdda_mipi_csi_1p25:
344 vdda_mipi_dsi0_1p2:
345 vdda_mipi_dsi1_1p2:
346 vdda_pcie_1p2:
347 vdda_ufs1_1p2:
348 vdda_ufs2_1p2:
349 vdda_usb1_ss_1p2:
350 vdda_usb2_ss_1p2:
351 vreg_l26a_1p2: ldo26 {
352 regulator-min-microvolt = <1200000>;
353 regulator-max-microvolt = <1200000>;
354 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
355 };
356
357 vreg_l28a_3p0: ldo28 {
358 regulator-min-microvolt = <2856000>;
359 regulator-max-microvolt = <3008000>;
360 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
361 };
362
363 vreg_lvs1a_1p8: lvs1 {
364 regulator-min-microvolt = <1800000>;
365 regulator-max-microvolt = <1800000>;
366 };
367
368 vreg_lvs2a_1p8: lvs2 {
369 regulator-min-microvolt = <1800000>;
370 regulator-max-microvolt = <1800000>;
371 };
372 };
373
374 regulators-1 {
375 compatible = "qcom,pmi8998-rpmh-regulators";
376 qcom,pmic-id = "b";
377
378 vdd-bob-supply = <&vph_pwr>;
379
380 vreg_bob: bob {
381 regulator-min-microvolt = <3312000>;
382 regulator-max-microvolt = <3600000>;
383 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
384 regulator-allow-bypass;
385 };
386 };
387
388 regulators-2 {
389 compatible = "qcom,pm8005-rpmh-regulators";
390 qcom,pmic-id = "c";
391
392 vdd-s1-supply = <&vph_pwr>;
393 vdd-s2-supply = <&vph_pwr>;
394 vdd-s3-supply = <&vph_pwr>;
395 vdd-s4-supply = <&vph_pwr>;
396
397 vreg_s3c_0p6: smps3 {
398 regulator-min-microvolt = <600000>;
399 regulator-max-microvolt = <600000>;
400 };
401 };
402 };
403
404 &cdsp_pas {
405 status = "okay";
406 firmware-name = "qcom/sdm845/cdsp.mbn";
407 };
408
409 &gcc {
410 protected-clocks = <GCC_QSPI_CORE_CLK>,
411 <GCC_QSPI_CORE_CLK_SRC>,
412 <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
413 <GCC_LPASS_Q6_AXI_CLK>,
414 <GCC_LPASS_SWAY_CLK>;
415 };
416
417 &gmu {
418 status = "okay";
419 };
420
421 &gpu {
422 status = "okay";
423
424 zap-shader {
425 memory-region = <&gpu_mem>;
426 firmware-name = "qcom/sdm845/a630_zap.mbn";
427 };
428 };
429
430 &i2c10 {
431 status = "okay";
432 clock-frequency = <400000>;
433 };
434
435 &ipa {
436 qcom,gsi-loader = "self";
437 memory-region = <&ipa_fw_mem>;
438 status = "okay";
439 };
440
441 &mdss {
442 status = "okay";
443 };
444
445 &mdss_dsi0 {
446 status = "okay";
447 vdda-supply = <&vdda_mipi_dsi0_1p2>;
448
449 qcom,dual-dsi-mode;
450 qcom,master-dsi;
451
452 ports {
453 port@1 {
454 endpoint {
455 remote-endpoint = <&truly_in_0>;
456 data-lanes = <0 1 2 3>;
457 };
458 };
459 };
460
461 panel@0 {
462 compatible = "truly,nt35597-2K-display";
463 reg = <0>;
464 vdda-supply = <&vreg_l14a_1p88>;
465
466 reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
467 mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
468
469 ports {
470 #address-cells = <1>;
471 #size-cells = <0>;
472
473 port@0 {
474 reg = <0>;
475 truly_in_0: endpoint {
476 remote-endpoint = <&mdss_dsi0_out>;
477 };
478 };
479
480 port@1 {
481 reg = <1>;
482 truly_in_1: endpoint {
483 remote-endpoint = <&mdss_dsi1_out>;
484 };
485 };
486 };
487 };
488 };
489
490 &mdss_dsi0_phy {
491 status = "okay";
492 vdds-supply = <&vdda_mipi_dsi0_pll>;
493 };
494
495 &mdss_dsi1 {
496 status = "okay";
497 vdda-supply = <&vdda_mipi_dsi1_1p2>;
498
499 qcom,dual-dsi-mode;
500
501 /* DSI1 is slave, so use DSI0 clocks */
502 assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
503
504 ports {
505 port@1 {
506 endpoint {
507 remote-endpoint = <&truly_in_1>;
508 data-lanes = <0 1 2 3>;
509 };
510 };
511 };
512 };
513
514 &mdss_dsi1_phy {
515 status = "okay";
516 vdds-supply = <&vdda_mipi_dsi1_pll>;
517 };
518
519 &mss_pil {
520 status = "okay";
521 firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
522 };
523
524 &pcie0 {
525 perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
526
527 pinctrl-0 = <&pcie0_default_state>;
528 pinctrl-names = "default";
529
530 status = "okay";
531 };
532
533 &pcie0_phy {
534 vdda-phy-supply = <&vreg_l1a_0p875>;
535 vdda-pll-supply = <&vreg_l26a_1p2>;
536
537 status = "okay";
538 };
539
540 &pcie1 {
541 perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
542
543 pinctrl-names = "default";
544 pinctrl-0 = <&pcie1_default_state>;
545
546 status = "okay";
547 };
548
549 &pcie1_phy {
550 status = "okay";
551
552 vdda-phy-supply = <&vreg_l1a_0p875>;
553 vdda-pll-supply = <&vreg_l26a_1p2>;
554 };
555
556 &pm8998_adc {
557 channel@4c {
558 reg = <ADC5_XO_THERM_100K_PU>;
559 label = "xo_therm";
560 qcom,ratiometric;
561 qcom,hw-settle-time = <200>;
562 };
563
564 channel@4d {
565 reg = <ADC5_AMUX_THM1_100K_PU>;
566 label = "msm_therm";
567 qcom,ratiometric;
568 qcom,hw-settle-time = <200>;
569 };
570
571 channel@4f {
572 reg = <ADC5_AMUX_THM3_100K_PU>;
573 label = "pa_therm1";
574 qcom,ratiometric;
575 qcom,hw-settle-time = <200>;
576 };
577
578 channel@51 {
579 reg = <ADC5_AMUX_THM5_100K_PU>;
580 label = "quiet_therm";
581 qcom,ratiometric;
582 qcom,hw-settle-time = <200>;
583 };
584
585 channel@83 {
586 reg = <ADC5_VPH_PWR>;
587 label = "vph_pwr";
588 qcom,ratiometric;
589 qcom,hw-settle-time = <200>;
590 };
591
592 channel@85 {
593 reg = <ADC5_VCOIN>;
594 label = "vcoin";
595 qcom,ratiometric;
596 qcom,hw-settle-time = <200>;
597 };
598 };
599
600 &pm8998_adc_tm {
601 status = "okay";
602
603 xo-thermistor@1 {
604 reg = <1>;
605 io-channels = <&pm8998_adc ADC5_XO_THERM_100K_PU>;
606 qcom,ratiometric;
607 qcom,hw-settle-time-us = <200>;
608 };
609
610 msm-thermistor@2 {
611 reg = <2>;
612 io-channels = <&pm8998_adc ADC5_AMUX_THM1_100K_PU>;
613 qcom,ratiometric;
614 qcom,hw-settle-time-us = <200>;
615 };
616
617 pa-thermistor@3 {
618 reg = <3>;
619 io-channels = <&pm8998_adc ADC5_AMUX_THM3_100K_PU>;
620 qcom,ratiometric;
621 qcom,hw-settle-time-us = <200>;
622 };
623
624 quiet-thermistor@4 {
625 reg = <4>;
626 io-channels = <&pm8998_adc ADC5_AMUX_THM5_100K_PU>;
627 qcom,ratiometric;
628 qcom,hw-settle-time-us = <200>;
629 };
630 };
631
632 &pm8998_resin {
633 linux,code = <KEY_VOLUMEDOWN>;
634 status = "okay";
635 };
636
637 &qupv3_id_1 {
638 status = "okay";
639 };
640
641 &sdhc_2 {
642 status = "okay";
643
644 pinctrl-names = "default";
645 pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>;
646
647 vmmc-supply = <&vreg_l21a_2p95>;
648 vqmmc-supply = <&vddpx_2>;
649
650 cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
651 };
652
653 &tlmm {
654 pcie0_default_state: pcie0-default-state {
655 clkreq-pins {
656 pins = "gpio36";
657 function = "pci_e0";
658 bias-pull-up;
659 };
660
661 perst-n-pins {
662 pins = "gpio35";
663 function = "gpio";
664 drive-strength = <2>;
665 bias-pull-down;
666 };
667
668 wake-n-pins {
669 pins = "gpio37";
670 function = "gpio";
671 drive-strength = <2>;
672 bias-pull-up;
673 };
674 };
675
676 pcie1_default_state: pcie1-default-state {
677 clkreq-pins {
678 pins = "gpio103";
679 function = "pci_e1";
680 bias-pull-up;
681 };
682
683 perst-n-pins {
684 pins = "gpio102";
685 function = "gpio";
686 drive-strength = <16>;
687 bias-pull-down;
688 };
689
690 wake-n-pins {
691 pins = "gpio104";
692 function = "gpio";
693 drive-strength = <2>;
694 bias-pull-up;
695 };
696 };
697 };
698
699 &uart9 {
700 status = "okay";
701 };
702
703 &ufs_mem_hc {
704 status = "okay";
705
706 reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
707
708 vcc-supply = <&vreg_l20a_2p95>;
709 vcc-max-microamp = <600000>;
710 };
711
712 &ufs_mem_phy {
713 status = "okay";
714
715 vdda-phy-supply = <&vdda_ufs1_core>;
716 vdda-pll-supply = <&vdda_ufs1_1p2>;
717 };
718
719 &usb_1 {
720 status = "okay";
721 };
722
723 &usb_1_dwc3 {
724 /* Until we have Type C hooked up we'll force this as peripheral. */
725 dr_mode = "peripheral";
726 };
727
728 &usb_1_hsphy {
729 status = "okay";
730
731 vdd-supply = <&vdda_usb1_ss_core>;
732 vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
733 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
734
735 qcom,imp-res-offset-value = <8>;
736 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
737 qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
738 qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
739 };
740
741 &usb_1_qmpphy {
742 status = "okay";
743
744 vdda-phy-supply = <&vdda_usb1_ss_1p2>;
745 vdda-pll-supply = <&vdda_usb1_ss_core>;
746 };
747
748 &usb_2 {
749 status = "okay";
750 };
751
752 &usb_2_dwc3 {
753 /*
754 * Though the USB block on SDM845 can support host, there's no vbus
755 * signal for this port on MTP. Thus (unless you have a non-compliant
756 * hub that works without vbus) the only sensible thing is to force
757 * peripheral mode.
758 */
759 dr_mode = "peripheral";
760 };
761
762 &usb_2_hsphy {
763 status = "okay";
764
765 vdd-supply = <&vdda_usb2_ss_core>;
766 vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
767 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
768
769 qcom,imp-res-offset-value = <8>;
770 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
771 };
772
773 &usb_2_qmpphy {
774 status = "okay";
775
776 vdda-phy-supply = <&vdda_usb2_ss_1p2>;
777 vdda-pll-supply = <&vdda_usb2_ss_core>;
778 };
779
780 &venus {
781 status = "okay";
782 };
783
784 &wifi {
785 status = "okay";
786 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
787 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
788 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
789 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
790
791 qcom,snoc-host-cap-8bit-quirk;
792 qcom,ath10k-calibration-variant = "Qualcomm_sdm845mtp";
793 };
794
795 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
796
797 &qup_i2c10_default {
798 drive-strength = <2>;
799 bias-disable;
800 };
801
802 &qup_uart9_rx {
803 drive-strength = <2>;
804 bias-pull-up;
805 };
806
807 &qup_uart9_tx {
808 drive-strength = <2>;
809 bias-disable;
810 };
811
812 &tlmm {
813 gpio-reserved-ranges = <0 4>, <81 4>;
814
815 sdc2_clk: sdc2-clk-state {
816 pins = "sdc2_clk";
817 bias-disable;
818
819 /*
820 * It seems that mmc_test reports errors if drive
821 * strength is not 16 on clk, cmd, and data pins.
822 */
823 drive-strength = <16>;
824 };
825
826 sdc2_cmd: sdc2-cmd-state {
827 pins = "sdc2_cmd";
828 bias-pull-up;
829 drive-strength = <16>;
830 };
831
832 sdc2_data: sdc2-data-state {
833 pins = "sdc2_data";
834 bias-pull-up;
835 drive-strength = <16>;
836 };
837
838 sd_card_det_n: sd-card-det-n-state {
839 pins = "gpio126";
840 function = "gpio";
841 bias-pull-up;
842 };
843 };
Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.