~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/arch/arm64/boot/dts/qcom/sdx75.dtsi

Version: ~ [ linux-6.11.5 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.58 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.114 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.169 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.228 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.284 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.322 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.9 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: BSD-3-Clause
  2 /*
  3  * SDX75 SoC device tree source
  4  *
  5  * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
  6  *
  7  */
  8 
  9 #include <dt-bindings/clock/qcom,rpmh.h>
 10 #include <dt-bindings/clock/qcom,sdx75-gcc.h>
 11 #include <dt-bindings/dma/qcom-gpi.h>
 12 #include <dt-bindings/gpio/gpio.h>
 13 #include <dt-bindings/interconnect/qcom,icc.h>
 14 #include <dt-bindings/interconnect/qcom,sdx75.h>
 15 #include <dt-bindings/interrupt-controller/arm-gic.h>
 16 #include <dt-bindings/mailbox/qcom-ipcc.h>
 17 #include <dt-bindings/power/qcom,rpmhpd.h>
 18 #include <dt-bindings/power/qcom-rpmpd.h>
 19 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 20 
 21 / {
 22         #address-cells = <2>;
 23         #size-cells = <2>;
 24         interrupt-parent = <&intc>;
 25 
 26         chosen: chosen { };
 27 
 28         clocks {
 29                 xo_board: xo-board {
 30                         compatible = "fixed-clock";
 31                         clock-frequency = <76800000>;
 32                         #clock-cells = <0>;
 33                 };
 34 
 35                 sleep_clk: sleep-clk {
 36                         compatible = "fixed-clock";
 37                         clock-frequency = <32000>;
 38                         #clock-cells = <0>;
 39                 };
 40         };
 41 
 42         cpus {
 43                 #address-cells = <2>;
 44                 #size-cells = <0>;
 45 
 46                 CPU0: cpu@0 {
 47                         device_type = "cpu";
 48                         compatible = "arm,cortex-a55";
 49                         reg = <0x0 0x0>;
 50                         clocks = <&cpufreq_hw 0>;
 51                         enable-method = "psci";
 52                         power-domains = <&CPU_PD0>;
 53                         power-domain-names = "psci";
 54                         qcom,freq-domain = <&cpufreq_hw 0>;
 55                         capacity-dmips-mhz = <1024>;
 56                         dynamic-power-coefficient = <100>;
 57                         next-level-cache = <&L2_0>;
 58 
 59                         L2_0: l2-cache {
 60                                 compatible = "cache";
 61                                 cache-level = <2>;
 62                                 cache-unified;
 63                                 next-level-cache = <&L3_0>;
 64                                 L3_0: l3-cache {
 65                                         compatible = "cache";
 66                                         cache-level = <3>;
 67                                         cache-unified;
 68                                 };
 69                         };
 70                 };
 71 
 72                 CPU1: cpu@100 {
 73                         device_type = "cpu";
 74                         compatible = "arm,cortex-a55";
 75                         reg = <0x0 0x100>;
 76                         clocks = <&cpufreq_hw 0>;
 77                         enable-method = "psci";
 78                         power-domains = <&CPU_PD1>;
 79                         power-domain-names = "psci";
 80                         qcom,freq-domain = <&cpufreq_hw 0>;
 81                         capacity-dmips-mhz = <1024>;
 82                         dynamic-power-coefficient = <100>;
 83                         next-level-cache = <&L2_100>;
 84 
 85                         L2_100: l2-cache {
 86                                 compatible = "cache";
 87                                 cache-level = <2>;
 88                                 cache-unified;
 89                                 next-level-cache = <&L3_0>;
 90                         };
 91                 };
 92 
 93                 CPU2: cpu@200 {
 94                         device_type = "cpu";
 95                         compatible = "arm,cortex-a55";
 96                         reg = <0x0 0x200>;
 97                         clocks = <&cpufreq_hw 0>;
 98                         enable-method = "psci";
 99                         power-domains = <&CPU_PD2>;
100                         power-domain-names = "psci";
101                         qcom,freq-domain = <&cpufreq_hw 0>;
102                         capacity-dmips-mhz = <1024>;
103                         dynamic-power-coefficient = <100>;
104                         next-level-cache = <&L2_200>;
105 
106                         L2_200: l2-cache {
107                                 compatible = "cache";
108                                 cache-level = <2>;
109                                 cache-unified;
110                                 next-level-cache = <&L3_0>;
111                         };
112                 };
113 
114                 CPU3: cpu@300 {
115                         device_type = "cpu";
116                         compatible = "arm,cortex-a55";
117                         reg = <0x0 0x300>;
118                         clocks = <&cpufreq_hw 0>;
119                         enable-method = "psci";
120                         power-domains = <&CPU_PD3>;
121                         power-domain-names = "psci";
122                         qcom,freq-domain = <&cpufreq_hw 0>;
123                         capacity-dmips-mhz = <1024>;
124                         dynamic-power-coefficient = <100>;
125                         next-level-cache = <&L2_300>;
126 
127                         L2_300: l2-cache {
128                                 compatible = "cache";
129                                 cache-level = <2>;
130                                 cache-unified;
131                                 next-level-cache = <&L3_0>;
132                         };
133                 };
134 
135                 cpu-map {
136                         cluster0 {
137                                 core0 {
138                                         cpu = <&CPU0>;
139                                 };
140 
141                                 core1 {
142                                         cpu = <&CPU1>;
143                                 };
144 
145                                 core2 {
146                                         cpu = <&CPU2>;
147                                 };
148 
149                                 core3 {
150                                         cpu = <&CPU3>;
151                                 };
152                         };
153                 };
154 
155                 idle-states {
156                         entry-method = "psci";
157 
158                         CPU_OFF: cpu-sleep-0 {
159                                 compatible = "arm,idle-state";
160                                 entry-latency-us = <235>;
161                                 exit-latency-us = <428>;
162                                 min-residency-us = <1774>;
163                                 arm,psci-suspend-param = <0x40000003>;
164                                 local-timer-stop;
165                         };
166 
167                         CPU_RAIL_OFF: cpu-rail-sleep-1 {
168                                 compatible = "arm,idle-state";
169                                 entry-latency-us = <800>;
170                                 exit-latency-us = <750>;
171                                 min-residency-us = <4090>;
172                                 arm,psci-suspend-param = <0x40000004>;
173                                 local-timer-stop;
174                         };
175 
176                 };
177 
178                 domain-idle-states {
179                         CLUSTER_SLEEP_0: cluster-sleep-0 {
180                                 compatible = "domain-idle-state";
181                                 arm,psci-suspend-param = <0x41000044>;
182                                 entry-latency-us = <1050>;
183                                 exit-latency-us = <2500>;
184                                 min-residency-us = <5309>;
185                         };
186 
187                         CLUSTER_SLEEP_1: cluster-sleep-1 {
188                                 compatible = "domain-idle-state";
189                                 arm,psci-suspend-param = <0x41001344>;
190                                 entry-latency-us = <2761>;
191                                 exit-latency-us = <3964>;
192                                 min-residency-us = <8467>;
193                         };
194 
195                         CLUSTER_SLEEP_2: cluster-sleep-2 {
196                                 compatible = "domain-idle-state";
197                                 arm,psci-suspend-param = <0x4100b344>;
198                                 entry-latency-us = <2793>;
199                                 exit-latency-us = <4023>;
200                                 min-residency-us = <9826>;
201                         };
202                 };
203         };
204 
205         firmware {
206                 scm: scm {
207                         compatible = "qcom,scm-sdx75", "qcom,scm";
208                 };
209         };
210 
211         clk_virt: interconnect-0 {
212                 compatible = "qcom,sdx75-clk-virt";
213                 #interconnect-cells = <2>;
214                 qcom,bcm-voters = <&apps_bcm_voter>;
215                 clocks = <&rpmhcc RPMH_QPIC_CLK>;
216         };
217 
218         mc_virt: interconnect-1 {
219                 compatible = "qcom,sdx75-mc-virt";
220                 #interconnect-cells = <2>;
221                 qcom,bcm-voters = <&apps_bcm_voter>;
222         };
223 
224         memory@80000000 {
225                 device_type = "memory";
226                 reg = <0x0 0x80000000 0x0 0x0>;
227         };
228 
229         pmu {
230                 compatible = "arm,cortex-a55-pmu";
231                 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
232         };
233 
234         psci {
235                 compatible = "arm,psci-1.0";
236                 method = "smc";
237 
238                 CPU_PD0: power-domain-cpu0 {
239                         #power-domain-cells = <0>;
240                         power-domains = <&CLUSTER_PD>;
241                         domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>;
242                 };
243 
244                 CPU_PD1: power-domain-cpu1 {
245                         #power-domain-cells = <0>;
246                         power-domains = <&CLUSTER_PD>;
247                         domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>;
248                 };
249 
250                 CPU_PD2: power-domain-cpu2 {
251                         #power-domain-cells = <0>;
252                         power-domains = <&CLUSTER_PD>;
253                         domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>;
254                 };
255 
256                 CPU_PD3: power-domain-cpu3 {
257                         #power-domain-cells = <0>;
258                         power-domains = <&CLUSTER_PD>;
259                         domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>;
260                 };
261 
262                 CLUSTER_PD: power-domain-cpu-cluster0 {
263                         #power-domain-cells = <0>;
264                         domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1 &CLUSTER_SLEEP_2>;
265                 };
266         };
267 
268         reserved-memory {
269                 #address-cells = <2>;
270                 #size-cells = <2>;
271                 ranges;
272 
273                 gunyah_hyp_mem: gunyah-hyp@80000000 {
274                         reg = <0x0 0x80000000 0x0 0x800000>;
275                         no-map;
276                 };
277 
278                 hyp_elf_package_mem: hyp-elf-package@80800000 {
279                         reg = <0x0 0x80800000 0x0 0x200000>;
280                         no-map;
281                 };
282 
283                 access_control_db_mem: access-control-db@81380000 {
284                         reg = <0x0 0x81380000 0x0 0x80000>;
285                         no-map;
286                 };
287 
288                 qteetz_mem: qteetz@814e0000 {
289                         reg = <0x0 0x814e0000 0x0 0x2a0000>;
290                         no-map;
291                 };
292 
293                 trusted_apps_mem: trusted-apps@81780000 {
294                         reg = <0x0 0x81780000 0x0 0xa00000>;
295                         no-map;
296                 };
297 
298                 xbl_ramdump_mem: xbl-ramdump@87a00000 {
299                         reg = <0x0 0x87a00000 0x0 0x1c0000>;
300                         no-map;
301                 };
302 
303                 cpucp_fw_mem: cpucp-fw@87c00000 {
304                         reg = <0x0 0x87c00000 0x0 0x100000>;
305                         no-map;
306                 };
307 
308                 xbl_dtlog_mem: xbl-dtlog@87d00000 {
309                         reg = <0x0 0x87d00000 0x0 0x40000>;
310                         no-map;
311                 };
312 
313                 xbl_sc_mem: xbl-sc@87d40000 {
314                         reg = <0x0 0x87d40000 0x0 0x40000>;
315                         no-map;
316                 };
317 
318                 modem_efs_shared_mem: modem-efs-shared@87d80000 {
319                         reg = <0x0 0x87d80000 0x0 0x10000>;
320                         no-map;
321                 };
322 
323                 aop_image_mem: aop-image@87e00000 {
324                         reg = <0x0 0x87e00000 0x0 0x20000>;
325                         no-map;
326                 };
327 
328                 smem_mem: smem@87e20000 {
329                         reg = <0x0 0x87e20000 0x0 0xc0000>;
330                         no-map;
331                 };
332 
333                 aop_cmd_db_mem: aop-cmd-db@87ee0000 {
334                         compatible = "qcom,cmd-db";
335                         reg = <0x0 0x87ee0000 0x0 0x20000>;
336                         no-map;
337                 };
338 
339                 aop_config_mem: aop-config@87f00000 {
340                         reg = <0x0 0x87f00000 0x0 0x20000>;
341                         no-map;
342                 };
343 
344                 ipa_fw_mem: ipa-fw@87f20000 {
345                         reg = <0x0 0x87f20000 0x0 0x10000>;
346                         no-map;
347                 };
348 
349                 secdata_mem: secdata@87f30000 {
350                         reg = <0x0 0x87f30000 0x0 0x1000>;
351                         no-map;
352                 };
353 
354                 tme_crashdump_mem: tme-crashdump@87f31000 {
355                         reg = <0x0 0x87f31000 0x0 0x40000>;
356                         no-map;
357                 };
358 
359                 tme_log_mem: tme-log@87f71000 {
360                         reg = <0x0 0x87f71000 0x0 0x4000>;
361                         no-map;
362                 };
363 
364                 uefi_log_mem: uefi-log@87f75000 {
365                         reg = <0x0 0x87f75000 0x0 0x10000>;
366                         no-map;
367                 };
368 
369                 qdss_mem: qdss@88800000 {
370                         reg = <0x0 0x88800000 0x0 0x300000>;
371                         no-map;
372                 };
373 
374                 audio_heap_mem: audio-heap@88b00000 {
375                         compatible = "shared-dma-pool";
376                         reg = <0x0 0x88b00000 0x0 0x400000>;
377                         no-map;
378                 };
379 
380                 mpss_dsmharq_mem: mpss-dsmharq@88f00000 {
381                         reg = <0x0 0x88f00000 0x0 0x5080000>;
382                         no-map;
383                 };
384 
385                 q6_mpss_dtb_mem: q6-mpss-dtb@8df80000 {
386                         reg = <0x0 0x8df80000 0x0 0x80000>;
387                         no-map;
388                 };
389 
390                 mpssadsp_mem: mpssadsp@8e000000 {
391                         reg = <0x0 0x8e000000 0x0 0xf400000>;
392                         no-map;
393                 };
394 
395                 gunyah_trace_buffer_mem: gunyah-trace-buffer@bdb00000 {
396                         reg = <0x0 0xbdb00000 0x0 0x2000000>;
397                         no-map;
398                 };
399 
400                 smmu_debug_buf_mem: smmu-debug-buf@bfb00000 {
401                         reg = <0x0 0xbfb00000 0x0 0x100000>;
402                         no-map;
403                 };
404 
405                 hyp_smmu_s2_pt_mem: hyp-smmu-s2-pt@bfc00000 {
406                         reg = <0x0 0xbfc00000 0x0 0x400000>;
407                         no-map;
408                 };
409         };
410 
411         smp2p-modem {
412                 compatible = "qcom,smp2p";
413                 qcom,smem = <435>, <428>;
414                 interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
415                                              IPCC_MPROC_SIGNAL_SMP2P
416                                              IRQ_TYPE_EDGE_RISING>;
417                 mboxes = <&ipcc IPCC_CLIENT_MPSS
418                                 IPCC_MPROC_SIGNAL_SMP2P>;
419 
420                 qcom,local-pid = <0>;
421                 qcom,remote-pid = <1>;
422 
423                 smp2p_modem_out: master-kernel {
424                         qcom,entry-name = "master-kernel";
425                         #qcom,smem-state-cells = <1>;
426                 };
427 
428                 smp2p_modem_in: slave-kernel {
429                         qcom,entry-name = "slave-kernel";
430                         interrupt-controller;
431                         #interrupt-cells = <2>;
432                 };
433 
434                 ipa_smp2p_out: ipa-ap-to-modem {
435                         qcom,entry-name = "ipa";
436                         #qcom,smem-state-cells = <1>;
437                 };
438 
439                 ipa_smp2p_in: ipa-modem-to-ap {
440                         qcom,entry-name = "ipa";
441                         interrupt-controller;
442                         #interrupt-cells = <2>;
443                 };
444         };
445 
446         smem: smem {
447                 compatible = "qcom,smem";
448                 memory-region = <&smem_mem>;
449                 hwlocks = <&tcsr_mutex 3>;
450         };
451 
452         soc: soc@0 {
453                 compatible = "simple-bus";
454                 #address-cells = <2>;
455                 #size-cells = <2>;
456                 ranges = <0 0 0 0 0x10 0>;
457                 dma-ranges = <0 0 0 0 0x10 0>;
458 
459                 gcc: clock-controller@80000 {
460                         compatible = "qcom,sdx75-gcc";
461                         reg = <0x0 0x0080000 0x0 0x1f7400>;
462                         clocks = <&rpmhcc RPMH_CXO_CLK>,
463                                  <&sleep_clk>,
464                                  <0>,
465                                  <0>,
466                                  <0>,
467                                  <0>,
468                                  <0>,
469                                  <0>,
470                                  <0>,
471                                  <0>,
472                                  <0>,
473                                  <0>,
474                                  <0>,
475                                  <0>,
476                                  <0>;
477                         #clock-cells = <1>;
478                         #reset-cells = <1>;
479                         #power-domain-cells = <1>;
480                 };
481 
482                 ipcc: mailbox@408000 {
483                         compatible = "qcom,sdx75-ipcc", "qcom,ipcc";
484                         reg = <0 0x00408000 0 0x1000>;
485                         interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
486                         interrupt-controller;
487                         #interrupt-cells = <3>;
488                         #mbox-cells = <2>;
489                 };
490 
491                 gpi_dma: dma-controller@900000 {
492                         compatible = "qcom,sdx75-gpi-dma", "qcom,sm6350-gpi-dma";
493                         reg = <0x0 0x00900000 0x0 0x60000>;
494                         #dma-cells = <3>;
495                         interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
496                                      <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
497                                      <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
498                                      <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
499                                      <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
500                                      <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
501                                      <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
502                                      <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
503                                      <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
504                                      <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
505                                      <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
506                                      <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
507                         dma-channels = <12>;
508                         dma-channel-mask = <0x7f>;
509                         iommus = <&apps_smmu 0xf6 0x0>;
510                         status = "disabled";
511                 };
512 
513                 qupv3_id_0: geniqup@9c0000 {
514                         compatible = "qcom,geni-se-qup";
515                         reg = <0x0 0x009c0000 0x0 0x2000>;
516                         clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
517                                  <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
518                         clock-names = "m-ahb",
519                                       "s-ahb";
520                         iommus = <&apps_smmu 0xe3 0x0>;
521                         interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
522                                          &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>;
523                         interconnect-names = "qup-core";
524                         #address-cells = <2>;
525                         #size-cells = <2>;
526                         ranges;
527                         status = "disabled";
528 
529                         i2c0: i2c@980000 {
530                                 compatible = "qcom,geni-i2c";
531                                 reg = <0x0 0x00980000 0x0 0x4000>;
532                                 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
533                                 clock-names = "se";
534                                 interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
535                                 #address-cells = <1>;
536                                 #size-cells = <0>;
537                                 pinctrl-0 = <&qup_i2c0_data_clk>;
538                                 pinctrl-names = "default";
539                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
540                                                  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
541                                                 <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
542                                                  &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
543                                                 <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
544                                                  &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
545                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
546                                 dmas = <&gpi_dma 0 0 QCOM_GPI_I2C>,
547                                        <&gpi_dma 1 0 QCOM_GPI_I2C>;
548                                 dma-names = "tx", "rx";
549                                 status = "disabled";
550                         };
551 
552                         spi0: spi@980000 {
553                                 compatible = "qcom,geni-spi";
554                                 reg = <0x0 0x00980000 0x0 0x4000>;
555                                 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
556                                 clock-names = "se";
557                                 interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
558                                 #address-cells = <1>;
559                                 #size-cells = <0>;
560                                 pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
561                                 pinctrl-names = "default";
562                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
563                                                  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
564                                                 <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
565                                                  &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
566                                                 <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
567                                                  &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
568                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
569                                 dmas = <&gpi_dma 0 0 QCOM_GPI_SPI>,
570                                        <&gpi_dma 1 0 QCOM_GPI_SPI>;
571                                 dma-names = "tx", "rx";
572                                 status = "disabled";
573                         };
574 
575                         uart1: serial@984000 {
576                                 compatible = "qcom,geni-debug-uart";
577                                 reg = <0x0 0x00984000 0x0 0x4000>;
578                                 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
579                                 clock-names = "se";
580                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
581                                                  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
582                                                 <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
583                                                  &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
584                                 interconnect-names = "qup-core",
585                                                      "qup-config";
586                                 interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
587                                 pinctrl-0 = <&qupv3_se1_2uart_active>;
588                                 pinctrl-1 = <&qupv3_se1_2uart_sleep>;
589                                 pinctrl-names = "default",
590                                                 "sleep";
591                                 status = "disabled";
592                         };
593 
594                         i2c2: i2c@988000 {
595                                 compatible = "qcom,geni-i2c";
596                                 reg = <0x0 0x00988000 0x0 0x4000>;
597                                 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
598                                 clock-names = "se";
599                                 interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
600                                 #address-cells = <1>;
601                                 #size-cells = <0>;
602                                 pinctrl-0 = <&qup_i2c2_data_clk>;
603                                 pinctrl-names = "default";
604                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
605                                                  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
606                                                 <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
607                                                  &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
608                                                 <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
609                                                  &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
610                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
611                                 dmas = <&gpi_dma 0 2 QCOM_GPI_I2C>,
612                                        <&gpi_dma 1 2 QCOM_GPI_I2C>;
613                                 dma-names = "tx", "rx";
614                                 status = "disabled";
615                         };
616 
617                         spi2: spi@988000 {
618                                 compatible = "qcom,geni-spi";
619                                 reg = <0x0 0x00988000 0x0 0x4000>;
620                                 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
621                                 clock-names = "se";
622                                 interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
623                                 #address-cells = <1>;
624                                 #size-cells = <0>;
625                                 pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
626                                 pinctrl-names = "default";
627                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
628                                                  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
629                                                 <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
630                                                  &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
631                                                 <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
632                                                  &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
633                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
634                                 dmas = <&gpi_dma 0 2 QCOM_GPI_SPI>,
635                                        <&gpi_dma 1 2 QCOM_GPI_SPI>;
636                                 dma-names = "tx", "rx";
637                                 status = "disabled";
638                         };
639 
640                         i2c3: i2c@98c000 {
641                                 compatible = "qcom,geni-i2c";
642                                 reg = <0x0 0x0098c000 0x0 0x4000>;
643                                 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
644                                 clock-names = "se";
645                                 interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
646                                 #address-cells = <1>;
647                                 #size-cells = <0>;
648                                 pinctrl-0 = <&qup_i2c3_data_clk>;
649                                 pinctrl-names = "default";
650                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
651                                                  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
652                                                 <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
653                                                  &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
654                                                 <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
655                                                  &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
656                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
657                                 dmas = <&gpi_dma 0 3 QCOM_GPI_I2C>,
658                                        <&gpi_dma 1 3 QCOM_GPI_I2C>;
659                                 dma-names = "tx", "rx";
660                                 status = "disabled";
661                         };
662 
663                         spi3: spi@98c000 {
664                                 compatible = "qcom,geni-spi";
665                                 reg = <0x0 0x0098c000 0x0 0x4000>;
666                                 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
667                                 clock-names = "se";
668                                 interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
669                                 #address-cells = <1>;
670                                 #size-cells = <0>;
671                                 pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
672                                 pinctrl-names = "default";
673                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
674                                                  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
675                                                 <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
676                                                  &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
677                                                 <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
678                                                  &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
679                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
680                                 dmas = <&gpi_dma 0 3 QCOM_GPI_SPI>,
681                                        <&gpi_dma 1 3 QCOM_GPI_SPI>;
682                                 dma-names = "tx", "rx";
683                                 status = "disabled";
684                         };
685 
686                         uart4: serial@990000 {
687                                 compatible = "qcom,geni-uart";
688                                 reg = <0x0 0x00990000 0x0 0x4000>;
689                                 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
690                                 clock-names = "se";
691                                 interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
692                                 pinctrl-0 = <&qup_uart4_default>, <&qup_uart4_cts_rts>;
693                                 pinctrl-names = "default";
694                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
695                                                  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
696                                                 <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
697                                                  &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
698                                 interconnect-names = "qup-core", "qup-config";
699                                 status = "disabled";
700                         };
701 
702                         i2c5: i2c@994000 {
703                                 compatible = "qcom,geni-i2c";
704                                 reg = <0x0 0x00994000 0x0 0x4000>;
705                                 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
706                                 clock-names = "se";
707                                 interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
708                                 #address-cells = <1>;
709                                 #size-cells = <0>;
710                                 pinctrl-0 = <&qup_i2c5_data_clk>;
711                                 pinctrl-names = "default";
712                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
713                                                  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
714                                                 <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
715                                                  &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
716                                                 <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
717                                                  &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
718                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
719                                 dmas = <&gpi_dma 0 5 QCOM_GPI_I2C>,
720                                        <&gpi_dma 1 5 QCOM_GPI_I2C>;
721                                 dma-names = "tx", "rx";
722                                 status = "disabled";
723                         };
724 
725                         i2c6: i2c@998000 {
726                                 compatible = "qcom,geni-i2c";
727                                 reg = <0x0 0x00998000 0x0 0x4000>;
728                                 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
729                                 clock-names = "se";
730                                 interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
731                                 #address-cells = <1>;
732                                 #size-cells = <0>;
733                                 pinctrl-0 = <&qup_i2c6_data_clk>;
734                                 pinctrl-names = "default";
735                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
736                                                  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
737                                                 <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
738                                                  &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
739                                                 <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
740                                                  &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
741                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
742                                 dmas = <&gpi_dma 0 6 QCOM_GPI_I2C>,
743                                        <&gpi_dma 1 6 QCOM_GPI_I2C>;
744                                 dma-names = "tx", "rx";
745                                 status = "disabled";
746                         };
747 
748                         spi6: spi@998000 {
749                                 compatible = "qcom,geni-spi";
750                                 reg = <0x0 0x00998000 0x0 0x4000>;
751                                 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
752                                 clock-names = "se";
753                                 interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
754                                 #address-cells = <1>;
755                                 #size-cells = <0>;
756                                 pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
757                                 pinctrl-names = "default";
758                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
759                                                  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
760                                                 <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
761                                                  &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
762                                                 <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
763                                                  &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
764                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
765                                 dmas = <&gpi_dma 0 6 QCOM_GPI_SPI>,
766                                        <&gpi_dma 1 6 QCOM_GPI_SPI>;
767                                 dma-names = "tx", "rx";
768                                 status = "disabled";
769                         };
770 
771                         i2c7: i2c@99c000 {
772                                 compatible = "qcom,geni-i2c";
773                                 reg = <0x0 0x0099c000 0x0 0x4000>;
774                                 clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
775                                 clock-names = "se";
776                                 interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
777                                 #address-cells = <1>;
778                                 #size-cells = <0>;
779                                 pinctrl-0 = <&qup_i2c7_data_clk>;
780                                 pinctrl-names = "default";
781                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
782                                                  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
783                                                 <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
784                                                  &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
785                                                 <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
786                                                  &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
787                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
788                                 dmas = <&gpi_dma 0 7 QCOM_GPI_I2C>,
789                                        <&gpi_dma 1 7 QCOM_GPI_I2C>;
790                                 dma-names = "tx", "rx";
791                                 status = "disabled";
792                         };
793 
794                         spi7: spi@99c000 {
795                                 compatible = "qcom,geni-spi";
796                                 reg = <0x0 0x0099c000 0x0 0x4000>;
797                                 clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
798                                 clock-names = "se";
799                                 interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
800                                 #address-cells = <1>;
801                                 #size-cells = <0>;
802                                 pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
803                                 pinctrl-names = "default";
804                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
805                                                  &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
806                                                 <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
807                                                  &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
808                                                 <&system_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
809                                                  &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
810                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
811                                 dmas = <&gpi_dma 0 7 QCOM_GPI_SPI>,
812                                        <&gpi_dma 1 7 QCOM_GPI_SPI>;
813                                 dma-names = "tx", "rx";
814                                 status = "disabled";
815                         };
816                 };
817 
818                 usb_hsphy: phy@ff4000 {
819                         compatible = "qcom,sdx75-snps-eusb2-phy", "qcom,sm8550-snps-eusb2-phy";
820                         reg = <0x0 0x00ff4000 0x0 0x154>;
821                         #phy-cells = <0>;
822 
823                         clocks = <&rpmhcc RPMH_CXO_CLK>;
824                         clock-names = "ref";
825 
826                         resets = <&gcc GCC_QUSB2PHY_BCR>;
827 
828                         status = "disabled";
829                 };
830 
831                 usb_qmpphy: phy@ff6000 {
832                         compatible = "qcom,sdx75-qmp-usb3-uni-phy";
833                         reg = <0x0 0x00ff6000 0x0 0x2000>;
834 
835                         clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
836                                  <&gcc GCC_USB2_CLKREF_EN>,
837                                  <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
838                                  <&gcc GCC_USB3_PHY_PIPE_CLK>;
839                         clock-names = "aux",
840                                       "ref",
841                                       "cfg_ahb",
842                                       "pipe";
843 
844                         power-domains = <&gcc GCC_USB3_PHY_GDSC>;
845 
846                         resets = <&gcc GCC_USB3_PHY_BCR>,
847                                  <&gcc GCC_USB3PHY_PHY_BCR>;
848                         reset-names = "phy",
849                                       "phy_phy";
850 
851                         #clock-cells = <0>;
852                         clock-output-names = "usb3_uni_phy_pipe_clk_src";
853 
854                         #phy-cells = <0>;
855 
856                         status = "disabled";
857                 };
858 
859                 system_noc: interconnect@1640000 {
860                         compatible = "qcom,sdx75-system-noc";
861                         reg = <0x0 0x01640000 0x0 0x4b400>;
862                         #interconnect-cells = <2>;
863                         qcom,bcm-voters = <&apps_bcm_voter>;
864                 };
865 
866                 pcie_anoc: interconnect@16c0000 {
867                         compatible = "qcom,sdx75-pcie-anoc";
868                         reg = <0x0 0x016c0000 0x0 0x14200>;
869                         #interconnect-cells = <2>;
870                         qcom,bcm-voters = <&apps_bcm_voter>;
871                 };
872 
873                 tcsr_mutex: hwlock@1f40000 {
874                         compatible = "qcom,tcsr-mutex";
875                         reg = <0x0 0x01f40000 0x0 0x40000>;
876                         #hwlock-cells = <1>;
877                 };
878 
879                 tcsr: syscon@1fc0000 {
880                         compatible = "qcom,sdx75-tcsr", "syscon";
881                         reg = <0x0 0x01fc0000 0x0 0x30000>;
882                 };
883 
884                 sdhc: mmc@8804000 {
885                         compatible = "qcom,sdx75-sdhci", "qcom,sdhci-msm-v5";
886                         reg = <0x0 0x08804000 0x0 0x1000>;
887 
888                         interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
889                                      <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
890                         interrupt-names = "hc_irq",
891                                           "pwr_irq";
892 
893                         clocks = <&gcc GCC_SDCC1_AHB_CLK>,
894                                  <&gcc GCC_SDCC1_APPS_CLK>,
895                                  <&rpmhcc RPMH_CXO_CLK>;
896                         clock-names = "iface",
897                                       "core",
898                                       "xo";
899                         iommus = <&apps_smmu 0x00a0 0x0>;
900                         qcom,dll-config = <0x0007442c>;
901                         qcom,ddr-config = <0x80040868>;
902                         power-domains = <&rpmhpd RPMHPD_CX>;
903                         operating-points-v2 = <&sdhc1_opp_table>;
904 
905                         interconnects = <&system_noc MASTER_SDCC_1 &mc_virt SLAVE_EBI1>,
906                                         <&gem_noc MASTER_APPSS_PROC &system_noc SLAVE_SDCC_1>;
907                         interconnect-names = "sdhc-ddr",
908                                              "cpu-sdhc";
909                         bus-width = <4>;
910                         dma-coherent;
911 
912                         /* Forbid SDR104/SDR50 - broken hw! */
913                         sdhci-caps-mask = <0x3 0>;
914 
915                         status = "disabled";
916 
917                         sdhc1_opp_table: opp-table {
918                                 compatible = "operating-points-v2";
919 
920                                 opp-100000000 {
921                                         opp-hz = /bits/ 64 <100000000>;
922                                         required-opps = <&rpmhpd_opp_low_svs>;
923                                 };
924 
925                                 opp-384000000 {
926                                         opp-hz = /bits/ 64 <384000000>;
927                                         required-opps = <&rpmhpd_opp_nom>;
928                                 };
929                         };
930                 };
931 
932                 usb: usb@a6f8800 {
933                         compatible = "qcom,sdx75-dwc3", "qcom,dwc3";
934                         reg = <0x0 0x0a6f8800 0x0 0x400>;
935                         #address-cells = <2>;
936                         #size-cells = <2>;
937                         ranges;
938 
939                         clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
940                                  <&gcc GCC_USB30_MASTER_CLK>,
941                                  <&gcc GCC_USB30_MSTR_AXI_CLK>,
942                                  <&gcc GCC_USB30_SLEEP_CLK>,
943                                  <&gcc GCC_USB30_MOCK_UTMI_CLK>;
944                         clock-names = "cfg_noc",
945                                       "core",
946                                       "iface",
947                                       "sleep",
948                                       "mock_utmi";
949 
950                         assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
951                                           <&gcc GCC_USB30_MASTER_CLK>;
952                         assigned-clock-rates = <19200000>, <200000000>;
953 
954                         interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
955                                               <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
956                                               <&pdc 9 IRQ_TYPE_EDGE_RISING>,
957                                               <&pdc 10 IRQ_TYPE_EDGE_RISING>;
958                         interrupt-names = "hs_phy_irq",
959                                           "ss_phy_irq",
960                                           "dm_hs_phy_irq",
961                                           "dp_hs_phy_irq";
962 
963                         power-domains = <&gcc GCC_USB30_GDSC>;
964 
965                         resets = <&gcc GCC_USB30_BCR>;
966 
967                         interconnects = <&system_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
968                                          &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
969                                         <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
970                                          &system_noc SLAVE_USB3 QCOM_ICC_TAG_ALWAYS>;
971                         interconnect-names = "usb-ddr",
972                                              "apps-usb";
973 
974                         status = "disabled";
975 
976                         usb_dwc3: usb@a600000 {
977                                 compatible = "snps,dwc3";
978                                 reg = <0x0 0x0a600000 0x0 0xcd00>;
979                                 interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
980                                 iommus = <&apps_smmu 0x80 0x0>;
981                                 snps,dis_u2_susphy_quirk;
982                                 snps,dis_enblslpm_quirk;
983                                 phys = <&usb_hsphy>,
984                                        <&usb_qmpphy>;
985                                 phy-names = "usb2-phy",
986                                             "usb3-phy";
987 
988                                 ports {
989                                         #address-cells = <1>;
990                                         #size-cells = <0>;
991 
992                                         port@0 {
993                                                 reg = <0>;
994 
995                                                 usb_1_dwc3_hs: endpoint {
996                                                 };
997                                         };
998 
999                                         port@1 {
1000                                                 reg = <1>;
1001 
1002                                                 usb_1_dwc3_ss: endpoint {
1003                                                 };
1004                                         };
1005                                 };
1006                         };
1007                 };
1008 
1009                 pdc: interrupt-controller@b220000 {
1010                         compatible = "qcom,sdx75-pdc", "qcom,pdc";
1011                         reg = <0x0 0xb220000 0x0 0x30000>,
1012                               <0x0 0x174000f0 0x0 0x64>;
1013                         qcom,pdc-ranges = <0 147 52>,
1014                                           <52 266 32>,
1015                                           <84 500 59>;
1016                         #interrupt-cells = <2>;
1017                         interrupt-parent = <&intc>;
1018                         interrupt-controller;
1019                 };
1020 
1021                 aoss_qmp: power-controller@c310000 {
1022                         compatible = "qcom,sdx75-aoss-qmp", "qcom,aoss-qmp";
1023                         reg = <0 0x0c310000 0 0x1000>;
1024                         interrupt-parent = <&ipcc>;
1025                         interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
1026                                                      IRQ_TYPE_EDGE_RISING>;
1027                         mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
1028 
1029                         #clock-cells = <0>;
1030                 };
1031 
1032                 spmi_bus: spmi@c400000 {
1033                         compatible = "qcom,spmi-pmic-arb";
1034                         reg = <0x0 0x0c400000 0x0 0x3000>,
1035                               <0x0 0x0c500000 0x0 0x400000>,
1036                               <0x0 0x0c440000 0x0 0x80000>,
1037                               <0x0 0x0c4c0000 0x0 0x10000>,
1038                               <0x0 0x0c42d000 0x0 0x4000>;
1039                         reg-names = "core",
1040                                     "chnls",
1041                                     "obsrvr",
1042                                     "intr",
1043                                     "cnfg";
1044                         interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
1045                         interrupt-names = "periph_irq";
1046                         qcom,ee = <0>;
1047                         qcom,channel = <0>;
1048                         qcom,bus-id = <0>;
1049                         #address-cells = <2>;
1050                         #size-cells = <0>;
1051                         interrupt-controller;
1052                         #interrupt-cells = <4>;
1053                 };
1054 
1055                 tlmm: pinctrl@f000000 {
1056                         compatible = "qcom,sdx75-tlmm";
1057                         reg = <0x0 0x0f000000 0x0 0x400000>;
1058                         interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
1059                         gpio-controller;
1060                         #gpio-cells = <2>;
1061                         gpio-ranges = <&tlmm 0 0 133>;
1062                         interrupt-controller;
1063                         #interrupt-cells = <2>;
1064                         wakeup-parent = <&pdc>;
1065 
1066                         qup_i2c0_data_clk: qup-i2c0-data-clk-state {
1067                                 /* SDA, SCL */
1068                                 pins = "gpio8", "gpio9";
1069                                 function = "qup_se0";
1070                                 drive-strength = <2>;
1071                                 bias-pull-up;
1072                         };
1073 
1074                         qup_i2c2_data_clk: qup-i2c2-data-clk-state {
1075                                 /* SDA, SCL */
1076                                 pins = "gpio14", "gpio15";
1077                                 function = "qup_se2";
1078                                 drive-strength = <2>;
1079                                 bias-pull-up;
1080                         };
1081 
1082                         qup_i2c3_data_clk: qup-i2c3-data-clk-state {
1083                                 /* SDA, SCL */
1084                                 pins = "gpio52", "gpio53";
1085                                 function = "qup_se3";
1086                                 drive-strength = <2>;
1087                                 bias-pull-up;
1088                         };
1089 
1090                         qup_i2c5_data_clk: qup-i2c5-data-clk-state {
1091                                 /* SDA, SCL */
1092                                 pins = "gpio110", "gpio111";
1093                                 function = "qup_se5";
1094                                 drive-strength = <2>;
1095                                 bias-pull-up;
1096                         };
1097 
1098                         qup_i2c6_data_clk: qup-i2c6-data-clk-state {
1099                                 /* SDA, SCL */
1100                                 pins = "gpio112", "gpio113";
1101                                 function = "qup_se6";
1102                                 drive-strength = <2>;
1103                                 bias-pull-up;
1104                         };
1105 
1106                         qup_i2c7_data_clk: qup-i2c7-data-clk-state {
1107                                 /* SDA, SCL */
1108                                 pins = "gpio116", "gpio117";
1109                                 function = "qup_se7";
1110                                 drive-strength = <2>;
1111                                 bias-pull-up;
1112                         };
1113 
1114                         qup_spi0_cs: qup-spi0-cs-state {
1115                                 pins = "gpio11";
1116                                 function = "qup_se0";
1117                                 drive-strength = <6>;
1118                                 bias-pull-down;
1119                         };
1120 
1121                         qup_spi0_data_clk: qup-spi0-data-clk-state {
1122                                 /* MISO, MOSI, CLK */
1123                                 pins = "gpio8", "gpio9", "gpio10";
1124                                 function = "qup_se0";
1125                                 drive-strength = <6>;
1126                                 bias-pull-down;
1127                         };
1128 
1129                         qup_spi2_cs: qup-spi2-cs-state {
1130                                 pins = "gpio17";
1131                                 function = "qup_se2";
1132                                 drive-strength = <6>;
1133                                 bias-pull-down;
1134                         };
1135 
1136                         qup_spi2_data_clk: qup-spi2-data-clk-state {
1137                                 /* MISO, MOSI, CLK */
1138                                 pins = "gpio14", "gpio15", "gpio16";
1139                                 function = "qup_se2";
1140                                 drive-strength = <6>;
1141                                 bias-pull-down;
1142                         };
1143 
1144                         qup_spi3_cs: qup-spi3-cs-state {
1145                                 pins = "gpio55";
1146                                 function = "qup_se3";
1147                                 drive-strength = <6>;
1148                                 bias-pull-down;
1149                         };
1150 
1151                         qup_spi3_data_clk: qup-spi3-data-clk-state {
1152                                 /* MISO, MOSI, CLK */
1153                                 pins = "gpio52", "gpio53", "gpio54";
1154                                 function = "qup_se3";
1155                                 drive-strength = <6>;
1156                                 bias-pull-down;
1157                         };
1158 
1159                         qup_spi6_cs: qup-spi6-cs-state {
1160                                 pins = "gpio115";
1161                                 function = "qup_se6";
1162                                 drive-strength = <6>;
1163                                 bias-pull-down;
1164                         };
1165 
1166                         qup_spi6_data_clk: qup-spi6-data-clk-state {
1167                                 /* MISO, MOSI, CLK */
1168                                 pins = "gpio112", "gpio113", "gpio114";
1169                                 function = "qup_se6";
1170                                 drive-strength = <6>;
1171                                 bias-pull-down;
1172                         };
1173 
1174                         qup_spi7_cs: qup-spi7-cs-state {
1175                                 pins = "gpio119";
1176                                 function = "qup_se7";
1177                                 drive-strength = <6>;
1178                                 bias-pull-down;
1179                         };
1180 
1181                         qup_spi7_data_clk: qup-spi7-data-clk-state {
1182                                 /* MISO, MOSI, CLK */
1183                                 pins = "gpio116", "gpio117", "gpio118";
1184                                 function = "qup_se7";
1185                                 drive-strength = <6>;
1186                                 bias-pull-down;
1187                         };
1188 
1189                         qup_uart4_cts_rts: qup-uart4-cts-rts-state {
1190                                 /* CTS, RTS */
1191                                 pins = "gpio52", "gpio53";
1192                                 function = "qup_se3";
1193                                 drive-strength = <2>;
1194                                 bias-pull-down;
1195                         };
1196 
1197                         qup_uart4_default: qup-uart4-default-state {
1198                                 /* TX, RX */
1199                                 pins = "gpio54", "gpio55";
1200                                 function = "qup_se3";
1201                                 drive-strength = <2>;
1202                                 bias-pull-up;
1203                         };
1204 
1205                         qupv3_se1_2uart_active: qupv3-se1-2uart-active-state {
1206                                 tx-pins {
1207                                         pins = "gpio12";
1208                                         function = "qup_se1_l2_mira";
1209                                         drive-strength = <2>;
1210                                         bias-disable;
1211                                 };
1212 
1213                                 rx-pins {
1214                                         pins = "gpio13";
1215                                         function = "qup_se1_l3_mira";
1216                                         drive-strength = <2>;
1217                                         bias-disable;
1218                                 };
1219                         };
1220 
1221                         qupv3_se1_2uart_sleep: qupv3-se1-2uart-sleep-state {
1222                                 pins = "gpio12", "gpio13";
1223                                 function = "gpio";
1224                                 drive-strength = <2>;
1225                                 bias-pull-down;
1226                         };
1227 
1228                         sdc1_default: sdc1-default-state {
1229                                 clk-pins {
1230                                         pins = "sdc1_clk";
1231                                         drive-strength = <16>;
1232                                         bias-disable;
1233                                 };
1234 
1235                                 cmd-pins {
1236                                         pins = "sdc1_cmd";
1237                                         drive-strength = <10>;
1238                                         bias-pull-up;
1239                                 };
1240 
1241                                 data-pins {
1242                                         pins = "sdc1_data";
1243                                         drive-strength = <10>;
1244                                         bias-pull-up;
1245                                 };
1246                         };
1247 
1248                         sdc1_sleep: sdc1-sleep-state {
1249                                 clk-pins {
1250                                         pins = "sdc1_clk";
1251                                         drive-strength = <2>;
1252                                         bias-disable;
1253                                 };
1254 
1255                                 cmd-pins {
1256                                         pins = "sdc1_cmd";
1257                                         drive-strength = <2>;
1258                                         bias-pull-up;
1259                                 };
1260 
1261                                 data-pins {
1262                                         pins = "sdc1_data";
1263                                         drive-strength = <2>;
1264                                         bias-pull-up;
1265                                 };
1266                         };
1267                 };
1268 
1269                 apps_smmu: iommu@15000000 {
1270                         compatible = "qcom,sdx75-smmu-500", "qcom,smmu-500", "arm,mmu-500";
1271                         reg = <0x0 0x15000000 0x0 0x40000>;
1272                         #iommu-cells = <2>;
1273                         #global-interrupts = <2>;
1274                         dma-coherent;
1275                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
1276                                      <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
1277                                      <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
1278                                      <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
1279                                      <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
1280                                      <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
1281                                      <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
1282                                      <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
1283                                      <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
1284                                      <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
1285                                      <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
1286                                      <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
1287                                      <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
1288                                      <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
1289                                      <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
1290                                      <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
1291                                      <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
1292                                      <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
1293                                      <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
1294                                      <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
1295                                      <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
1296                                      <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
1297                                      <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
1298                                      <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
1299                                      <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
1300                                      <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
1301                                      <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
1302                                      <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
1303                                      <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
1304                                      <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
1305                                      <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
1306                                      <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
1307                                      <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
1308                 };
1309 
1310                 intc: interrupt-controller@17200000 {
1311                         compatible = "arm,gic-v3";
1312                         #interrupt-cells = <3>;
1313                         interrupt-controller;
1314                         #redistributor-regions = <1>;
1315                         redistributor-stride = <0x0 0x20000>;
1316                         reg = <0x0 0x17200000 0x0 0x10000>,
1317                               <0x0 0x17260000 0x0 0x80000>;
1318                         interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
1319                 };
1320 
1321                 timer@17420000 {
1322                         compatible = "arm,armv7-timer-mem";
1323                         reg = <0x0 0x17420000 0x0 0x1000>;
1324                         #address-cells = <1>;
1325                         #size-cells = <1>;
1326                         ranges = <0 0 0 0x20000000>;
1327 
1328                         frame@17421000 {
1329                                 reg = <0x17421000 0x1000>,
1330                                       <0x17422000 0x1000>;
1331                                 frame-number = <0>;
1332                                 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
1333                                              <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
1334                         };
1335 
1336                         frame@17423000 {
1337                                 reg = <0x17423000 0x1000>;
1338                                 frame-number = <1>;
1339                                 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
1340                                 status = "disabled";
1341                         };
1342 
1343                         frame@17425000 {
1344                                 reg = <0x17425000 0x1000>;
1345                                 frame-number = <2>;
1346                                 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
1347                                 status = "disabled";
1348                         };
1349 
1350                         frame@17427000 {
1351                                 reg = <0x17427000 0x1000>;
1352                                 frame-number = <3>;
1353                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
1354                                 status = "disabled";
1355                         };
1356 
1357                         frame@17429000 {
1358                                 reg = <0x17429000 0x1000>;
1359                                 frame-number = <4>;
1360                                 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
1361                                 status = "disabled";
1362                         };
1363 
1364                         frame@1742b000 {
1365                                 reg = <0x1742b000 0x1000>;
1366                                 frame-number = <5>;
1367                                 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
1368                                 status = "disabled";
1369                         };
1370 
1371                         frame@1742d000 {
1372                                 reg = <0x1742d000 0x1000>;
1373                                 frame-number = <6>;
1374                                 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
1375                                 status = "disabled";
1376                         };
1377                 };
1378 
1379                 apps_rsc: rsc@17a00000 {
1380                         label = "apps_rsc";
1381                         compatible = "qcom,rpmh-rsc";
1382                         reg = <0x0 0x17a00000 0x0 0x10000>,
1383                               <0x0 0x17a10000 0x0 0x10000>,
1384                               <0x0 0x17a20000 0x0 0x10000>;
1385                         reg-names = "drv-0", "drv-1", "drv-2";
1386                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
1387                                      <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
1388                                      <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
1389 
1390                         power-domains = <&CLUSTER_PD>;
1391                         qcom,tcs-offset = <0xd00>;
1392                         qcom,drv-id = <2>;
1393                         qcom,tcs-config = <ACTIVE_TCS    3>,
1394                                           <SLEEP_TCS     2>,
1395                                           <WAKE_TCS      2>,
1396                                           <CONTROL_TCS   0>;
1397 
1398                         apps_bcm_voter: bcm-voter {
1399                                 compatible = "qcom,bcm-voter";
1400                         };
1401 
1402                         rpmhcc: clock-controller {
1403                                 compatible = "qcom,sdx75-rpmh-clk";
1404                                 clocks = <&xo_board>;
1405                                 clock-names = "xo";
1406                                 #clock-cells = <1>;
1407                         };
1408 
1409                         rpmhpd: power-controller {
1410                                 compatible = "qcom,sdx75-rpmhpd";
1411                                 #power-domain-cells = <1>;
1412                                 operating-points-v2 = <&rpmhpd_opp_table>;
1413 
1414                                 rpmhpd_opp_table: opp-table {
1415                                         compatible = "operating-points-v2";
1416 
1417                                         rpmhpd_opp_ret: opp-16 {
1418                                                 opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
1419                                         };
1420 
1421                                         rpmhpd_opp_min_svs: opp-48 {
1422                                                 opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
1423                                         };
1424 
1425                                         rpmhpd_opp_low_svs: opp-64 {
1426                                                 opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
1427                                         };
1428 
1429                                         rpmhpd_opp_svs: opp-128 {
1430                                                 opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
1431                                         };
1432 
1433                                         rpmhpd_opp_svs_l1: opp-192 {
1434                                                 opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
1435                                         };
1436 
1437                                         rpmhpd_opp_nom: opp-256 {
1438                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
1439                                         };
1440 
1441                                         rpmhpd_opp_nom_l1: opp-320 {
1442                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
1443                                         };
1444 
1445                                         rpmhpd_opp_nom_l2: opp-336 {
1446                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
1447                                         };
1448 
1449                                         rpmhpd_opp_turbo: opp-384 {
1450                                                 opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
1451                                         };
1452 
1453                                         rpmhpd_opp_turbo_l1: opp-416 {
1454                                                 opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
1455                                         };
1456                                 };
1457                         };
1458                 };
1459 
1460                 cpufreq_hw: cpufreq@17d91000 {
1461                         compatible = "qcom,sdx75-cpufreq-epss", "qcom,cpufreq-epss";
1462                         reg = <0x0 0x17d91000 0x0 0x1000>;
1463                         reg-names = "freq-domain0";
1464                         clocks = <&rpmhcc RPMH_CXO_CLK>,
1465                                  <&gcc GPLL0>;
1466                         clock-names = "xo",
1467                                       "alternate";
1468                         interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
1469                         interrupt-names = "dcvsh-irq-0";
1470                         #freq-domain-cells = <1>;
1471                         #clock-cells = <1>;
1472                 };
1473 
1474                 dc_noc: interconnect@190e0000 {
1475                         compatible = "qcom,sdx75-dc-noc";
1476                         reg = <0x0 0x190e0000 0x0 0x8200>;
1477                         #interconnect-cells = <2>;
1478                         qcom,bcm-voters = <&apps_bcm_voter>;
1479                 };
1480 
1481                 gem_noc: interconnect@19100000 {
1482                         compatible = "qcom,sdx75-gem-noc";
1483                         reg = <0x0 0x19100000 0x0 0x34080>;
1484                         #interconnect-cells = <2>;
1485                         qcom,bcm-voters = <&apps_bcm_voter>;
1486                 };
1487         };
1488 
1489         timer {
1490                 compatible = "arm,armv8-timer";
1491                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
1492                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
1493                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
1494                              <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
1495         };
1496 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php