~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

TOMOYO Linux Cross Reference
Linux/arch/arm64/boot/dts/qcom/sm8450.dtsi

Version: ~ [ linux-6.12-rc7 ] ~ [ linux-6.11.7 ] ~ [ linux-6.10.14 ] ~ [ linux-6.9.12 ] ~ [ linux-6.8.12 ] ~ [ linux-6.7.12 ] ~ [ linux-6.6.60 ] ~ [ linux-6.5.13 ] ~ [ linux-6.4.16 ] ~ [ linux-6.3.13 ] ~ [ linux-6.2.16 ] ~ [ linux-6.1.116 ] ~ [ linux-6.0.19 ] ~ [ linux-5.19.17 ] ~ [ linux-5.18.19 ] ~ [ linux-5.17.15 ] ~ [ linux-5.16.20 ] ~ [ linux-5.15.171 ] ~ [ linux-5.14.21 ] ~ [ linux-5.13.19 ] ~ [ linux-5.12.19 ] ~ [ linux-5.11.22 ] ~ [ linux-5.10.229 ] ~ [ linux-5.9.16 ] ~ [ linux-5.8.18 ] ~ [ linux-5.7.19 ] ~ [ linux-5.6.19 ] ~ [ linux-5.5.19 ] ~ [ linux-5.4.285 ] ~ [ linux-5.3.18 ] ~ [ linux-5.2.21 ] ~ [ linux-5.1.21 ] ~ [ linux-5.0.21 ] ~ [ linux-4.20.17 ] ~ [ linux-4.19.323 ] ~ [ linux-4.18.20 ] ~ [ linux-4.17.19 ] ~ [ linux-4.16.18 ] ~ [ linux-4.15.18 ] ~ [ linux-4.14.336 ] ~ [ linux-4.13.16 ] ~ [ linux-4.12.14 ] ~ [ linux-4.11.12 ] ~ [ linux-4.10.17 ] ~ [ linux-4.9.337 ] ~ [ linux-4.4.302 ] ~ [ linux-3.10.108 ] ~ [ linux-2.6.32.71 ] ~ [ linux-2.6.0 ] ~ [ linux-2.4.37.11 ] ~ [ unix-v6-master ] ~ [ ccs-tools-1.8.12 ] ~ [ policy-sample ] ~
Architecture: ~ [ i386 ] ~ [ alpha ] ~ [ m68k ] ~ [ mips ] ~ [ ppc ] ~ [ sparc ] ~ [ sparc64 ] ~

  1 // SPDX-License-Identifier: BSD-3-Clause
  2 /*
  3  * Copyright (c) 2021, Linaro Limited
  4  */
  5 
  6 #include <dt-bindings/interrupt-controller/arm-gic.h>
  7 #include <dt-bindings/clock/qcom,gcc-sm8450.h>
  8 #include <dt-bindings/clock/qcom,rpmh.h>
  9 #include <dt-bindings/clock/qcom,sm8450-camcc.h>
 10 #include <dt-bindings/clock/qcom,sm8450-dispcc.h>
 11 #include <dt-bindings/clock/qcom,sm8450-gpucc.h>
 12 #include <dt-bindings/clock/qcom,sm8450-videocc.h>
 13 #include <dt-bindings/dma/qcom-gpi.h>
 14 #include <dt-bindings/firmware/qcom,scm.h>
 15 #include <dt-bindings/gpio/gpio.h>
 16 #include <dt-bindings/mailbox/qcom-ipcc.h>
 17 #include <dt-bindings/phy/phy-qcom-qmp.h>
 18 #include <dt-bindings/power/qcom,rpmhpd.h>
 19 #include <dt-bindings/power/qcom-rpmpd.h>
 20 #include <dt-bindings/interconnect/qcom,icc.h>
 21 #include <dt-bindings/interconnect/qcom,sm8450.h>
 22 #include <dt-bindings/reset/qcom,sm8450-gpucc.h>
 23 #include <dt-bindings/soc/qcom,gpr.h>
 24 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 25 #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
 26 #include <dt-bindings/thermal/thermal.h>
 27 
 28 / {
 29         interrupt-parent = <&intc>;
 30 
 31         #address-cells = <2>;
 32         #size-cells = <2>;
 33 
 34         chosen { };
 35 
 36         clocks {
 37                 xo_board: xo-board {
 38                         compatible = "fixed-clock";
 39                         #clock-cells = <0>;
 40                         clock-frequency = <76800000>;
 41                 };
 42 
 43                 sleep_clk: sleep-clk {
 44                         compatible = "fixed-clock";
 45                         #clock-cells = <0>;
 46                         clock-frequency = <32000>;
 47                 };
 48         };
 49 
 50         cpus {
 51                 #address-cells = <2>;
 52                 #size-cells = <0>;
 53 
 54                 CPU0: cpu@0 {
 55                         device_type = "cpu";
 56                         compatible = "qcom,kryo780";
 57                         reg = <0x0 0x0>;
 58                         enable-method = "psci";
 59                         next-level-cache = <&L2_0>;
 60                         power-domains = <&CPU_PD0>;
 61                         power-domain-names = "psci";
 62                         qcom,freq-domain = <&cpufreq_hw 0>;
 63                         #cooling-cells = <2>;
 64                         clocks = <&cpufreq_hw 0>;
 65                         L2_0: l2-cache {
 66                                 compatible = "cache";
 67                                 cache-level = <2>;
 68                                 cache-unified;
 69                                 next-level-cache = <&L3_0>;
 70                                 L3_0: l3-cache {
 71                                         compatible = "cache";
 72                                         cache-level = <3>;
 73                                         cache-unified;
 74                                 };
 75                         };
 76                 };
 77 
 78                 CPU1: cpu@100 {
 79                         device_type = "cpu";
 80                         compatible = "qcom,kryo780";
 81                         reg = <0x0 0x100>;
 82                         enable-method = "psci";
 83                         next-level-cache = <&L2_100>;
 84                         power-domains = <&CPU_PD1>;
 85                         power-domain-names = "psci";
 86                         qcom,freq-domain = <&cpufreq_hw 0>;
 87                         #cooling-cells = <2>;
 88                         clocks = <&cpufreq_hw 0>;
 89                         L2_100: l2-cache {
 90                                 compatible = "cache";
 91                                 cache-level = <2>;
 92                                 cache-unified;
 93                                 next-level-cache = <&L3_0>;
 94                         };
 95                 };
 96 
 97                 CPU2: cpu@200 {
 98                         device_type = "cpu";
 99                         compatible = "qcom,kryo780";
100                         reg = <0x0 0x200>;
101                         enable-method = "psci";
102                         next-level-cache = <&L2_200>;
103                         power-domains = <&CPU_PD2>;
104                         power-domain-names = "psci";
105                         qcom,freq-domain = <&cpufreq_hw 0>;
106                         #cooling-cells = <2>;
107                         clocks = <&cpufreq_hw 0>;
108                         L2_200: l2-cache {
109                                 compatible = "cache";
110                                 cache-level = <2>;
111                                 cache-unified;
112                                 next-level-cache = <&L3_0>;
113                         };
114                 };
115 
116                 CPU3: cpu@300 {
117                         device_type = "cpu";
118                         compatible = "qcom,kryo780";
119                         reg = <0x0 0x300>;
120                         enable-method = "psci";
121                         next-level-cache = <&L2_300>;
122                         power-domains = <&CPU_PD3>;
123                         power-domain-names = "psci";
124                         qcom,freq-domain = <&cpufreq_hw 0>;
125                         #cooling-cells = <2>;
126                         clocks = <&cpufreq_hw 0>;
127                         L2_300: l2-cache {
128                                 compatible = "cache";
129                                 cache-level = <2>;
130                                 cache-unified;
131                                 next-level-cache = <&L3_0>;
132                         };
133                 };
134 
135                 CPU4: cpu@400 {
136                         device_type = "cpu";
137                         compatible = "qcom,kryo780";
138                         reg = <0x0 0x400>;
139                         enable-method = "psci";
140                         next-level-cache = <&L2_400>;
141                         power-domains = <&CPU_PD4>;
142                         power-domain-names = "psci";
143                         qcom,freq-domain = <&cpufreq_hw 1>;
144                         #cooling-cells = <2>;
145                         clocks = <&cpufreq_hw 1>;
146                         L2_400: l2-cache {
147                                 compatible = "cache";
148                                 cache-level = <2>;
149                                 cache-unified;
150                                 next-level-cache = <&L3_0>;
151                         };
152                 };
153 
154                 CPU5: cpu@500 {
155                         device_type = "cpu";
156                         compatible = "qcom,kryo780";
157                         reg = <0x0 0x500>;
158                         enable-method = "psci";
159                         next-level-cache = <&L2_500>;
160                         power-domains = <&CPU_PD5>;
161                         power-domain-names = "psci";
162                         qcom,freq-domain = <&cpufreq_hw 1>;
163                         #cooling-cells = <2>;
164                         clocks = <&cpufreq_hw 1>;
165                         L2_500: l2-cache {
166                                 compatible = "cache";
167                                 cache-level = <2>;
168                                 cache-unified;
169                                 next-level-cache = <&L3_0>;
170                         };
171                 };
172 
173                 CPU6: cpu@600 {
174                         device_type = "cpu";
175                         compatible = "qcom,kryo780";
176                         reg = <0x0 0x600>;
177                         enable-method = "psci";
178                         next-level-cache = <&L2_600>;
179                         power-domains = <&CPU_PD6>;
180                         power-domain-names = "psci";
181                         qcom,freq-domain = <&cpufreq_hw 1>;
182                         #cooling-cells = <2>;
183                         clocks = <&cpufreq_hw 1>;
184                         L2_600: l2-cache {
185                                 compatible = "cache";
186                                 cache-level = <2>;
187                                 cache-unified;
188                                 next-level-cache = <&L3_0>;
189                         };
190                 };
191 
192                 CPU7: cpu@700 {
193                         device_type = "cpu";
194                         compatible = "qcom,kryo780";
195                         reg = <0x0 0x700>;
196                         enable-method = "psci";
197                         next-level-cache = <&L2_700>;
198                         power-domains = <&CPU_PD7>;
199                         power-domain-names = "psci";
200                         qcom,freq-domain = <&cpufreq_hw 2>;
201                         #cooling-cells = <2>;
202                         clocks = <&cpufreq_hw 2>;
203                         L2_700: l2-cache {
204                                 compatible = "cache";
205                                 cache-level = <2>;
206                                 cache-unified;
207                                 next-level-cache = <&L3_0>;
208                         };
209                 };
210 
211                 cpu-map {
212                         cluster0 {
213                                 core0 {
214                                         cpu = <&CPU0>;
215                                 };
216 
217                                 core1 {
218                                         cpu = <&CPU1>;
219                                 };
220 
221                                 core2 {
222                                         cpu = <&CPU2>;
223                                 };
224 
225                                 core3 {
226                                         cpu = <&CPU3>;
227                                 };
228 
229                                 core4 {
230                                         cpu = <&CPU4>;
231                                 };
232 
233                                 core5 {
234                                         cpu = <&CPU5>;
235                                 };
236 
237                                 core6 {
238                                         cpu = <&CPU6>;
239                                 };
240 
241                                 core7 {
242                                         cpu = <&CPU7>;
243                                 };
244                         };
245                 };
246 
247                 idle-states {
248                         entry-method = "psci";
249 
250                         LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
251                                 compatible = "arm,idle-state";
252                                 idle-state-name = "silver-rail-power-collapse";
253                                 arm,psci-suspend-param = <0x40000004>;
254                                 entry-latency-us = <800>;
255                                 exit-latency-us = <750>;
256                                 min-residency-us = <4090>;
257                                 local-timer-stop;
258                         };
259 
260                         BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
261                                 compatible = "arm,idle-state";
262                                 idle-state-name = "gold-rail-power-collapse";
263                                 arm,psci-suspend-param = <0x40000004>;
264                                 entry-latency-us = <600>;
265                                 exit-latency-us = <1550>;
266                                 min-residency-us = <4791>;
267                                 local-timer-stop;
268                         };
269                 };
270 
271                 domain-idle-states {
272                         CLUSTER_SLEEP_0: cluster-sleep-0 {
273                                 compatible = "domain-idle-state";
274                                 arm,psci-suspend-param = <0x41000044>;
275                                 entry-latency-us = <1050>;
276                                 exit-latency-us = <2500>;
277                                 min-residency-us = <5309>;
278                         };
279 
280                         CLUSTER_SLEEP_1: cluster-sleep-1 {
281                                 compatible = "domain-idle-state";
282                                 arm,psci-suspend-param = <0x4100c344>;
283                                 entry-latency-us = <2700>;
284                                 exit-latency-us = <3500>;
285                                 min-residency-us = <13959>;
286                         };
287                 };
288         };
289 
290         firmware {
291                 scm: scm {
292                         compatible = "qcom,scm-sm8450", "qcom,scm";
293                         qcom,dload-mode = <&tcsr 0x13000>;
294                         interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
295                         #reset-cells = <1>;
296                 };
297         };
298 
299         clk_virt: interconnect-0 {
300                 compatible = "qcom,sm8450-clk-virt";
301                 #interconnect-cells = <2>;
302                 qcom,bcm-voters = <&apps_bcm_voter>;
303         };
304 
305         mc_virt: interconnect-1 {
306                 compatible = "qcom,sm8450-mc-virt";
307                 #interconnect-cells = <2>;
308                 qcom,bcm-voters = <&apps_bcm_voter>;
309         };
310 
311         memory@a0000000 {
312                 device_type = "memory";
313                 /* We expect the bootloader to fill in the size */
314                 reg = <0x0 0xa0000000 0x0 0x0>;
315         };
316 
317         pmu {
318                 compatible = "arm,armv8-pmuv3";
319                 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
320         };
321 
322         psci {
323                 compatible = "arm,psci-1.0";
324                 method = "smc";
325 
326                 CPU_PD0: power-domain-cpu0 {
327                         #power-domain-cells = <0>;
328                         power-domains = <&CLUSTER_PD>;
329                         domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
330                 };
331 
332                 CPU_PD1: power-domain-cpu1 {
333                         #power-domain-cells = <0>;
334                         power-domains = <&CLUSTER_PD>;
335                         domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
336                 };
337 
338                 CPU_PD2: power-domain-cpu2 {
339                         #power-domain-cells = <0>;
340                         power-domains = <&CLUSTER_PD>;
341                         domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
342                 };
343 
344                 CPU_PD3: power-domain-cpu3 {
345                         #power-domain-cells = <0>;
346                         power-domains = <&CLUSTER_PD>;
347                         domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
348                 };
349 
350                 CPU_PD4: power-domain-cpu4 {
351                         #power-domain-cells = <0>;
352                         power-domains = <&CLUSTER_PD>;
353                         domain-idle-states = <&BIG_CPU_SLEEP_0>;
354                 };
355 
356                 CPU_PD5: power-domain-cpu5 {
357                         #power-domain-cells = <0>;
358                         power-domains = <&CLUSTER_PD>;
359                         domain-idle-states = <&BIG_CPU_SLEEP_0>;
360                 };
361 
362                 CPU_PD6: power-domain-cpu6 {
363                         #power-domain-cells = <0>;
364                         power-domains = <&CLUSTER_PD>;
365                         domain-idle-states = <&BIG_CPU_SLEEP_0>;
366                 };
367 
368                 CPU_PD7: power-domain-cpu7 {
369                         #power-domain-cells = <0>;
370                         power-domains = <&CLUSTER_PD>;
371                         domain-idle-states = <&BIG_CPU_SLEEP_0>;
372                 };
373 
374                 CLUSTER_PD: power-domain-cpu-cluster0 {
375                         #power-domain-cells = <0>;
376                         domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>;
377                 };
378         };
379 
380         qup_opp_table_100mhz: opp-table-qup {
381                 compatible = "operating-points-v2";
382 
383                 opp-50000000 {
384                         opp-hz = /bits/ 64 <50000000>;
385                         required-opps = <&rpmhpd_opp_min_svs>;
386                 };
387 
388                 opp-75000000 {
389                         opp-hz = /bits/ 64 <75000000>;
390                         required-opps = <&rpmhpd_opp_low_svs>;
391                 };
392 
393                 opp-100000000 {
394                         opp-hz = /bits/ 64 <100000000>;
395                         required-opps = <&rpmhpd_opp_svs>;
396                 };
397         };
398 
399         reserved_memory: reserved-memory {
400                 #address-cells = <2>;
401                 #size-cells = <2>;
402                 ranges;
403 
404                 hyp_mem: memory@80000000 {
405                         reg = <0x0 0x80000000 0x0 0x600000>;
406                         no-map;
407                 };
408 
409                 xbl_dt_log_mem: memory@80600000 {
410                         reg = <0x0 0x80600000 0x0 0x40000>;
411                         no-map;
412                 };
413 
414                 xbl_ramdump_mem: memory@80640000 {
415                         reg = <0x0 0x80640000 0x0 0x180000>;
416                         no-map;
417                 };
418 
419                 xbl_sc_mem: memory@807c0000 {
420                         reg = <0x0 0x807c0000 0x0 0x40000>;
421                         no-map;
422                 };
423 
424                 aop_image_mem: memory@80800000 {
425                         reg = <0x0 0x80800000 0x0 0x60000>;
426                         no-map;
427                 };
428 
429                 aop_cmd_db_mem: memory@80860000 {
430                         compatible = "qcom,cmd-db";
431                         reg = <0x0 0x80860000 0x0 0x20000>;
432                         no-map;
433                 };
434 
435                 aop_config_mem: memory@80880000 {
436                         reg = <0x0 0x80880000 0x0 0x20000>;
437                         no-map;
438                 };
439 
440                 tme_crash_dump_mem: memory@808a0000 {
441                         reg = <0x0 0x808a0000 0x0 0x40000>;
442                         no-map;
443                 };
444 
445                 tme_log_mem: memory@808e0000 {
446                         reg = <0x0 0x808e0000 0x0 0x4000>;
447                         no-map;
448                 };
449 
450                 uefi_log_mem: memory@808e4000 {
451                         reg = <0x0 0x808e4000 0x0 0x10000>;
452                         no-map;
453                 };
454 
455                 /* secdata region can be reused by apps */
456                 smem: memory@80900000 {
457                         compatible = "qcom,smem";
458                         reg = <0x0 0x80900000 0x0 0x200000>;
459                         hwlocks = <&tcsr_mutex 3>;
460                         no-map;
461                 };
462 
463                 cpucp_fw_mem: memory@80b00000 {
464                         reg = <0x0 0x80b00000 0x0 0x100000>;
465                         no-map;
466                 };
467 
468                 cdsp_secure_heap: memory@80c00000 {
469                         reg = <0x0 0x80c00000 0x0 0x4600000>;
470                         no-map;
471                 };
472 
473                 video_mem: memory@85700000 {
474                         reg = <0x0 0x85700000 0x0 0x700000>;
475                         no-map;
476                 };
477 
478                 adsp_mem: memory@85e00000 {
479                         reg = <0x0 0x85e00000 0x0 0x2100000>;
480                         no-map;
481                 };
482 
483                 slpi_mem: memory@88000000 {
484                         reg = <0x0 0x88000000 0x0 0x1900000>;
485                         no-map;
486                 };
487 
488                 cdsp_mem: memory@89900000 {
489                         reg = <0x0 0x89900000 0x0 0x2000000>;
490                         no-map;
491                 };
492 
493                 ipa_fw_mem: memory@8b900000 {
494                         reg = <0x0 0x8b900000 0x0 0x10000>;
495                         no-map;
496                 };
497 
498                 ipa_gsi_mem: memory@8b910000 {
499                         reg = <0x0 0x8b910000 0x0 0xa000>;
500                         no-map;
501                 };
502 
503                 gpu_micro_code_mem: memory@8b91a000 {
504                         reg = <0x0 0x8b91a000 0x0 0x2000>;
505                         no-map;
506                 };
507 
508                 spss_region_mem: memory@8ba00000 {
509                         reg = <0x0 0x8ba00000 0x0 0x180000>;
510                         no-map;
511                 };
512 
513                 /* First part of the "SPU secure shared memory" region */
514                 spu_tz_shared_mem: memory@8bb80000 {
515                         reg = <0x0 0x8bb80000 0x0 0x60000>;
516                         no-map;
517                 };
518 
519                 /* Second part of the "SPU secure shared memory" region */
520                 spu_modem_shared_mem: memory@8bbe0000 {
521                         reg = <0x0 0x8bbe0000 0x0 0x20000>;
522                         no-map;
523                 };
524 
525                 mpss_mem: memory@8bc00000 {
526                         reg = <0x0 0x8bc00000 0x0 0x13200000>;
527                         no-map;
528                 };
529 
530                 cvp_mem: memory@9ee00000 {
531                         reg = <0x0 0x9ee00000 0x0 0x700000>;
532                         no-map;
533                 };
534 
535                 camera_mem: memory@9f500000 {
536                         reg = <0x0 0x9f500000 0x0 0x800000>;
537                         no-map;
538                 };
539 
540                 rmtfs_mem: memory@9fd00000 {
541                         compatible = "qcom,rmtfs-mem";
542                         reg = <0x0 0x9fd00000 0x0 0x280000>;
543                         no-map;
544 
545                         qcom,client-id = <1>;
546                         qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
547                 };
548 
549                 xbl_sc_mem2: memory@a6e00000 {
550                         reg = <0x0 0xa6e00000 0x0 0x40000>;
551                         no-map;
552                 };
553 
554                 global_sync_mem: memory@a6f00000 {
555                         reg = <0x0 0xa6f00000 0x0 0x100000>;
556                         no-map;
557                 };
558 
559                 /* uefi region can be reused by APPS */
560 
561                 /* Linux kernel image is loaded at 0xa0000000 */
562 
563                 oem_vm_mem: memory@bb000000 {
564                         reg = <0x0 0xbb000000 0x0 0x5000000>;
565                         no-map;
566                 };
567 
568                 mte_mem: memory@c0000000 {
569                         reg = <0x0 0xc0000000 0x0 0x20000000>;
570                         no-map;
571                 };
572 
573                 qheebsp_reserved_mem: memory@e0000000 {
574                         reg = <0x0 0xe0000000 0x0 0x600000>;
575                         no-map;
576                 };
577 
578                 cpusys_vm_mem: memory@e0600000 {
579                         reg = <0x0 0xe0600000 0x0 0x400000>;
580                         no-map;
581                 };
582 
583                 hyp_reserved_mem: memory@e0a00000 {
584                         reg = <0x0 0xe0a00000 0x0 0x100000>;
585                         no-map;
586                 };
587 
588                 trust_ui_vm_mem: memory@e0b00000 {
589                         reg = <0x0 0xe0b00000 0x0 0x4af3000>;
590                         no-map;
591                 };
592 
593                 trust_ui_vm_qrtr: memory@e55f3000 {
594                         reg = <0x0 0xe55f3000 0x0 0x9000>;
595                         no-map;
596                 };
597 
598                 trust_ui_vm_vblk0_ring: memory@e55fc000 {
599                         reg = <0x0 0xe55fc000 0x0 0x4000>;
600                         no-map;
601                 };
602 
603                 trust_ui_vm_swiotlb: memory@e5600000 {
604                         reg = <0x0 0xe5600000 0x0 0x100000>;
605                         no-map;
606                 };
607 
608                 tz_stat_mem: memory@e8800000 {
609                         reg = <0x0 0xe8800000 0x0 0x100000>;
610                         no-map;
611                 };
612 
613                 tags_mem: memory@e8900000 {
614                         reg = <0x0 0xe8900000 0x0 0x1200000>;
615                         no-map;
616                 };
617 
618                 qtee_mem: memory@e9b00000 {
619                         reg = <0x0 0xe9b00000 0x0 0x500000>;
620                         no-map;
621                 };
622 
623                 trusted_apps_mem: memory@ea000000 {
624                         reg = <0x0 0xea000000 0x0 0x3900000>;
625                         no-map;
626                 };
627 
628                 trusted_apps_ext_mem: memory@ed900000 {
629                         reg = <0x0 0xed900000 0x0 0x3b00000>;
630                         no-map;
631                 };
632         };
633 
634         smp2p-adsp {
635                 compatible = "qcom,smp2p";
636                 qcom,smem = <443>, <429>;
637                 interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
638                                              IPCC_MPROC_SIGNAL_SMP2P
639                                              IRQ_TYPE_EDGE_RISING>;
640                 mboxes = <&ipcc IPCC_CLIENT_LPASS
641                                 IPCC_MPROC_SIGNAL_SMP2P>;
642 
643                 qcom,local-pid = <0>;
644                 qcom,remote-pid = <2>;
645 
646                 smp2p_adsp_out: master-kernel {
647                         qcom,entry-name = "master-kernel";
648                         #qcom,smem-state-cells = <1>;
649                 };
650 
651                 smp2p_adsp_in: slave-kernel {
652                         qcom,entry-name = "slave-kernel";
653                         interrupt-controller;
654                         #interrupt-cells = <2>;
655                 };
656         };
657 
658         smp2p-cdsp {
659                 compatible = "qcom,smp2p";
660                 qcom,smem = <94>, <432>;
661                 interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
662                                              IPCC_MPROC_SIGNAL_SMP2P
663                                              IRQ_TYPE_EDGE_RISING>;
664                 mboxes = <&ipcc IPCC_CLIENT_CDSP
665                                 IPCC_MPROC_SIGNAL_SMP2P>;
666 
667                 qcom,local-pid = <0>;
668                 qcom,remote-pid = <5>;
669 
670                 smp2p_cdsp_out: master-kernel {
671                         qcom,entry-name = "master-kernel";
672                         #qcom,smem-state-cells = <1>;
673                 };
674 
675                 smp2p_cdsp_in: slave-kernel {
676                         qcom,entry-name = "slave-kernel";
677                         interrupt-controller;
678                         #interrupt-cells = <2>;
679                 };
680         };
681 
682         smp2p-modem {
683                 compatible = "qcom,smp2p";
684                 qcom,smem = <435>, <428>;
685                 interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
686                                              IPCC_MPROC_SIGNAL_SMP2P
687                                              IRQ_TYPE_EDGE_RISING>;
688                 mboxes = <&ipcc IPCC_CLIENT_MPSS
689                                 IPCC_MPROC_SIGNAL_SMP2P>;
690 
691                 qcom,local-pid = <0>;
692                 qcom,remote-pid = <1>;
693 
694                 smp2p_modem_out: master-kernel {
695                         qcom,entry-name = "master-kernel";
696                         #qcom,smem-state-cells = <1>;
697                 };
698 
699                 smp2p_modem_in: slave-kernel {
700                         qcom,entry-name = "slave-kernel";
701                         interrupt-controller;
702                         #interrupt-cells = <2>;
703                 };
704 
705                 ipa_smp2p_out: ipa-ap-to-modem {
706                         qcom,entry-name = "ipa";
707                         #qcom,smem-state-cells = <1>;
708                 };
709 
710                 ipa_smp2p_in: ipa-modem-to-ap {
711                         qcom,entry-name = "ipa";
712                         interrupt-controller;
713                         #interrupt-cells = <2>;
714                 };
715         };
716 
717         smp2p-slpi {
718                 compatible = "qcom,smp2p";
719                 qcom,smem = <481>, <430>;
720                 interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
721                                              IPCC_MPROC_SIGNAL_SMP2P
722                                              IRQ_TYPE_EDGE_RISING>;
723                 mboxes = <&ipcc IPCC_CLIENT_SLPI
724                                 IPCC_MPROC_SIGNAL_SMP2P>;
725 
726                 qcom,local-pid = <0>;
727                 qcom,remote-pid = <3>;
728 
729                 smp2p_slpi_out: master-kernel {
730                         qcom,entry-name = "master-kernel";
731                         #qcom,smem-state-cells = <1>;
732                 };
733 
734                 smp2p_slpi_in: slave-kernel {
735                         qcom,entry-name = "slave-kernel";
736                         interrupt-controller;
737                         #interrupt-cells = <2>;
738                 };
739         };
740 
741         soc: soc@0 {
742                 #address-cells = <2>;
743                 #size-cells = <2>;
744                 ranges = <0 0 0 0 0x10 0>;
745                 dma-ranges = <0 0 0 0 0x10 0>;
746                 compatible = "simple-bus";
747 
748                 gcc: clock-controller@100000 {
749                         compatible = "qcom,gcc-sm8450";
750                         reg = <0x0 0x00100000 0x0 0x1f4200>;
751                         #clock-cells = <1>;
752                         #reset-cells = <1>;
753                         #power-domain-cells = <1>;
754                         clocks = <&rpmhcc RPMH_CXO_CLK>,
755                                  <&sleep_clk>,
756                                  <&pcie0_phy>,
757                                  <&pcie1_phy QMP_PCIE_PIPE_CLK>,
758                                  <&pcie1_phy QMP_PCIE_PHY_AUX_CLK>,
759                                  <&ufs_mem_phy 0>,
760                                  <&ufs_mem_phy 1>,
761                                  <&ufs_mem_phy 2>,
762                                  <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
763                         clock-names = "bi_tcxo",
764                                       "sleep_clk",
765                                       "pcie_0_pipe_clk",
766                                       "pcie_1_pipe_clk",
767                                       "pcie_1_phy_aux_clk",
768                                       "ufs_phy_rx_symbol_0_clk",
769                                       "ufs_phy_rx_symbol_1_clk",
770                                       "ufs_phy_tx_symbol_0_clk",
771                                       "usb3_phy_wrapper_gcc_usb30_pipe_clk";
772                 };
773 
774                 gpi_dma2: dma-controller@800000 {
775                         compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
776                         #dma-cells = <3>;
777                         reg = <0 0x00800000 0 0x60000>;
778                         interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
779                                      <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
780                                      <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
781                                      <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
782                                      <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
783                                      <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
784                                      <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
785                                      <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
786                                      <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
787                                      <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
788                                      <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
789                                      <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
790                         dma-channels = <12>;
791                         dma-channel-mask = <0x7e>;
792                         iommus = <&apps_smmu 0x496 0x0>;
793                         status = "disabled";
794                 };
795 
796                 qupv3_id_2: geniqup@8c0000 {
797                         compatible = "qcom,geni-se-qup";
798                         reg = <0x0 0x008c0000 0x0 0x2000>;
799                         clock-names = "m-ahb", "s-ahb";
800                         clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
801                                  <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
802                         iommus = <&apps_smmu 0x483 0x0>;
803                         #address-cells = <2>;
804                         #size-cells = <2>;
805                         ranges;
806                         status = "disabled";
807 
808                         i2c15: i2c@880000 {
809                                 compatible = "qcom,geni-i2c";
810                                 reg = <0x0 0x00880000 0x0 0x4000>;
811                                 clock-names = "se";
812                                 clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
813                                 pinctrl-names = "default";
814                                 pinctrl-0 = <&qup_i2c15_data_clk>;
815                                 interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
816                                 #address-cells = <1>;
817                                 #size-cells = <0>;
818                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
819                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
820                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
821                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
822                                 dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
823                                        <&gpi_dma2 1 0 QCOM_GPI_I2C>;
824                                 dma-names = "tx", "rx";
825                                 status = "disabled";
826                         };
827 
828                         spi15: spi@880000 {
829                                 compatible = "qcom,geni-spi";
830                                 reg = <0x0 0x00880000 0x0 0x4000>;
831                                 clock-names = "se";
832                                 clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
833                                 interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
834                                 pinctrl-names = "default";
835                                 pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
836                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
837                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
838                                 interconnect-names = "qup-core", "qup-config";
839                                 dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
840                                        <&gpi_dma2 1 0 QCOM_GPI_SPI>;
841                                 dma-names = "tx", "rx";
842                                 #address-cells = <1>;
843                                 #size-cells = <0>;
844                                 status = "disabled";
845                         };
846 
847                         i2c16: i2c@884000 {
848                                 compatible = "qcom,geni-i2c";
849                                 reg = <0x0 0x00884000 0x0 0x4000>;
850                                 clock-names = "se";
851                                 clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
852                                 pinctrl-names = "default";
853                                 pinctrl-0 = <&qup_i2c16_data_clk>;
854                                 interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
855                                 #address-cells = <1>;
856                                 #size-cells = <0>;
857                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
858                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
859                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
860                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
861                                 dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
862                                        <&gpi_dma2 1 1 QCOM_GPI_I2C>;
863                                 dma-names = "tx", "rx";
864                                 status = "disabled";
865                         };
866 
867                         spi16: spi@884000 {
868                                 compatible = "qcom,geni-spi";
869                                 reg = <0x0 0x00884000 0x0 0x4000>;
870                                 clock-names = "se";
871                                 clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
872                                 interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
873                                 pinctrl-names = "default";
874                                 pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
875                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
876                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
877                                 interconnect-names = "qup-core", "qup-config";
878                                 dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
879                                        <&gpi_dma2 1 1 QCOM_GPI_SPI>;
880                                 dma-names = "tx", "rx";
881                                 #address-cells = <1>;
882                                 #size-cells = <0>;
883                                 status = "disabled";
884                         };
885 
886                         i2c17: i2c@888000 {
887                                 compatible = "qcom,geni-i2c";
888                                 reg = <0x0 0x00888000 0x0 0x4000>;
889                                 clock-names = "se";
890                                 clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
891                                 pinctrl-names = "default";
892                                 pinctrl-0 = <&qup_i2c17_data_clk>;
893                                 interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
894                                 #address-cells = <1>;
895                                 #size-cells = <0>;
896                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
897                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
898                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
899                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
900                                 dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
901                                        <&gpi_dma2 1 2 QCOM_GPI_I2C>;
902                                 dma-names = "tx", "rx";
903                                 status = "disabled";
904                         };
905 
906                         spi17: spi@888000 {
907                                 compatible = "qcom,geni-spi";
908                                 reg = <0x0 0x00888000 0x0 0x4000>;
909                                 clock-names = "se";
910                                 clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
911                                 interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
912                                 pinctrl-names = "default";
913                                 pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>;
914                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
915                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
916                                 interconnect-names = "qup-core", "qup-config";
917                                 dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
918                                        <&gpi_dma2 1 2 QCOM_GPI_SPI>;
919                                 dma-names = "tx", "rx";
920                                 #address-cells = <1>;
921                                 #size-cells = <0>;
922                                 status = "disabled";
923                         };
924 
925                         i2c18: i2c@88c000 {
926                                 compatible = "qcom,geni-i2c";
927                                 reg = <0x0 0x0088c000 0x0 0x4000>;
928                                 clock-names = "se";
929                                 clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
930                                 pinctrl-names = "default";
931                                 pinctrl-0 = <&qup_i2c18_data_clk>;
932                                 interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
933                                 #address-cells = <1>;
934                                 #size-cells = <0>;
935                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
936                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
937                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
938                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
939                                 dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
940                                        <&gpi_dma2 1 3 QCOM_GPI_I2C>;
941                                 dma-names = "tx", "rx";
942                                 status = "disabled";
943                         };
944 
945                         spi18: spi@88c000 {
946                                 compatible = "qcom,geni-spi";
947                                 reg = <0 0x0088c000 0 0x4000>;
948                                 clock-names = "se";
949                                 clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
950                                 interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
951                                 pinctrl-names = "default";
952                                 pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>;
953                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
954                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
955                                 interconnect-names = "qup-core", "qup-config";
956                                 dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
957                                        <&gpi_dma2 1 3 QCOM_GPI_I2C>;
958                                 dma-names = "tx", "rx";
959                                 #address-cells = <1>;
960                                 #size-cells = <0>;
961                                 status = "disabled";
962                         };
963 
964                         i2c19: i2c@890000 {
965                                 compatible = "qcom,geni-i2c";
966                                 reg = <0x0 0x00890000 0x0 0x4000>;
967                                 clock-names = "se";
968                                 clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
969                                 pinctrl-names = "default";
970                                 pinctrl-0 = <&qup_i2c19_data_clk>;
971                                 interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
972                                 #address-cells = <1>;
973                                 #size-cells = <0>;
974                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
975                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
976                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
977                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
978                                 dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
979                                        <&gpi_dma2 1 4 QCOM_GPI_I2C>;
980                                 dma-names = "tx", "rx";
981                                 status = "disabled";
982                         };
983 
984                         spi19: spi@890000 {
985                                 compatible = "qcom,geni-spi";
986                                 reg = <0 0x00890000 0 0x4000>;
987                                 clock-names = "se";
988                                 clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
989                                 interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
990                                 pinctrl-names = "default";
991                                 pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>;
992                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
993                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
994                                 interconnect-names = "qup-core", "qup-config";
995                                 dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
996                                        <&gpi_dma2 1 4 QCOM_GPI_I2C>;
997                                 dma-names = "tx", "rx";
998                                 #address-cells = <1>;
999                                 #size-cells = <0>;
1000                                 status = "disabled";
1001                         };
1002 
1003                         i2c20: i2c@894000 {
1004                                 compatible = "qcom,geni-i2c";
1005                                 reg = <0x0 0x00894000 0x0 0x4000>;
1006                                 clock-names = "se";
1007                                 clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
1008                                 pinctrl-names = "default";
1009                                 pinctrl-0 = <&qup_i2c20_data_clk>;
1010                                 interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
1011                                 #address-cells = <1>;
1012                                 #size-cells = <0>;
1013                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1014                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1015                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
1016                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1017                                 dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
1018                                        <&gpi_dma2 1 5 QCOM_GPI_I2C>;
1019                                 dma-names = "tx", "rx";
1020                                 status = "disabled";
1021                         };
1022 
1023                         uart20: serial@894000 {
1024                                 compatible = "qcom,geni-uart";
1025                                 reg = <0 0x00894000 0 0x4000>;
1026                                 clock-names = "se";
1027                                 clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
1028                                 pinctrl-names = "default";
1029                                 pinctrl-0 = <&qup_uart20_default>;
1030                                 interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
1031                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
1032                                                  &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
1033                                                 <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
1034                                                  &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
1035                                 interconnect-names = "qup-core",
1036                                                      "qup-config";
1037                                 status = "disabled";
1038                         };
1039 
1040                         spi20: spi@894000 {
1041                                 compatible = "qcom,geni-spi";
1042                                 reg = <0 0x00894000 0 0x4000>;
1043                                 clock-names = "se";
1044                                 clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
1045                                 interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
1046                                 pinctrl-names = "default";
1047                                 pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>;
1048                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1049                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
1050                                 interconnect-names = "qup-core", "qup-config";
1051                                 dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
1052                                        <&gpi_dma2 1 5 QCOM_GPI_SPI>;
1053                                 dma-names = "tx", "rx";
1054                                 #address-cells = <1>;
1055                                 #size-cells = <0>;
1056                                 status = "disabled";
1057                         };
1058 
1059                         i2c21: i2c@898000 {
1060                                 compatible = "qcom,geni-i2c";
1061                                 reg = <0x0 0x00898000 0x0 0x4000>;
1062                                 clock-names = "se";
1063                                 clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
1064                                 pinctrl-names = "default";
1065                                 pinctrl-0 = <&qup_i2c21_data_clk>;
1066                                 interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
1067                                 #address-cells = <1>;
1068                                 #size-cells = <0>;
1069                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1070                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1071                                                 <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
1072                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1073                                 dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
1074                                        <&gpi_dma2 1 6 QCOM_GPI_I2C>;
1075                                 dma-names = "tx", "rx";
1076                                 status = "disabled";
1077                         };
1078 
1079                         spi21: spi@898000 {
1080                                 compatible = "qcom,geni-spi";
1081                                 reg = <0 0x00898000 0 0x4000>;
1082                                 clock-names = "se";
1083                                 clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
1084                                 interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
1085                                 pinctrl-names = "default";
1086                                 pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>;
1087                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
1088                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
1089                                 interconnect-names = "qup-core", "qup-config";
1090                                 dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
1091                                        <&gpi_dma2 1 6 QCOM_GPI_SPI>;
1092                                 dma-names = "tx", "rx";
1093                                 #address-cells = <1>;
1094                                 #size-cells = <0>;
1095                                 status = "disabled";
1096                         };
1097                 };
1098 
1099                 gpi_dma0: dma-controller@900000 {
1100                         compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
1101                         #dma-cells = <3>;
1102                         reg = <0 0x00900000 0 0x60000>;
1103                         interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
1104                                      <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
1105                                      <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
1106                                      <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
1107                                      <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
1108                                      <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
1109                                      <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
1110                                      <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
1111                                      <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
1112                                      <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
1113                                      <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
1114                                      <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
1115                         dma-channels = <12>;
1116                         dma-channel-mask = <0x7e>;
1117                         iommus = <&apps_smmu 0x5b6 0x0>;
1118                         status = "disabled";
1119                 };
1120 
1121                 qupv3_id_0: geniqup@9c0000 {
1122                         compatible = "qcom,geni-se-qup";
1123                         reg = <0x0 0x009c0000 0x0 0x2000>;
1124                         clock-names = "m-ahb", "s-ahb";
1125                         clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
1126                                  <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
1127                         iommus = <&apps_smmu 0x5a3 0x0>;
1128                         interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>;
1129                         interconnect-names = "qup-core";
1130                         #address-cells = <2>;
1131                         #size-cells = <2>;
1132                         ranges;
1133                         status = "disabled";
1134 
1135                         i2c0: i2c@980000 {
1136                                 compatible = "qcom,geni-i2c";
1137                                 reg = <0x0 0x00980000 0x0 0x4000>;
1138                                 clock-names = "se";
1139                                 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
1140                                 pinctrl-names = "default";
1141                                 pinctrl-0 = <&qup_i2c0_data_clk>;
1142                                 interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
1143                                 #address-cells = <1>;
1144                                 #size-cells = <0>;
1145                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1146                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1147                                                 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1148                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1149                                 dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
1150                                        <&gpi_dma0 1 0 QCOM_GPI_I2C>;
1151                                 dma-names = "tx", "rx";
1152                                 status = "disabled";
1153                         };
1154 
1155                         spi0: spi@980000 {
1156                                 compatible = "qcom,geni-spi";
1157                                 reg = <0x0 0x00980000 0x0 0x4000>;
1158                                 clock-names = "se";
1159                                 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
1160                                 interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
1161                                 pinctrl-names = "default";
1162                                 pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
1163                                 power-domains = <&rpmhpd RPMHPD_CX>;
1164                                 operating-points-v2 = <&qup_opp_table_100mhz>;
1165                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1166                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1167                                                 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1168                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1169                                 dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
1170                                        <&gpi_dma0 1 0 QCOM_GPI_SPI>;
1171                                 dma-names = "tx", "rx";
1172                                 #address-cells = <1>;
1173                                 #size-cells = <0>;
1174                                 status = "disabled";
1175                         };
1176 
1177                         i2c1: i2c@984000 {
1178                                 compatible = "qcom,geni-i2c";
1179                                 reg = <0x0 0x00984000 0x0 0x4000>;
1180                                 clock-names = "se";
1181                                 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
1182                                 pinctrl-names = "default";
1183                                 pinctrl-0 = <&qup_i2c1_data_clk>;
1184                                 interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
1185                                 #address-cells = <1>;
1186                                 #size-cells = <0>;
1187                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1188                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1189                                                 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1190                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1191                                 dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
1192                                        <&gpi_dma0 1 1 QCOM_GPI_I2C>;
1193                                 dma-names = "tx", "rx";
1194                                 status = "disabled";
1195                         };
1196 
1197                         spi1: spi@984000 {
1198                                 compatible = "qcom,geni-spi";
1199                                 reg = <0x0 0x00984000 0x0 0x4000>;
1200                                 clock-names = "se";
1201                                 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
1202                                 interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
1203                                 pinctrl-names = "default";
1204                                 pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
1205                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1206                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1207                                                 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1208                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1209                                 dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
1210                                        <&gpi_dma0 1 1 QCOM_GPI_SPI>;
1211                                 dma-names = "tx", "rx";
1212                                 #address-cells = <1>;
1213                                 #size-cells = <0>;
1214                                 status = "disabled";
1215                         };
1216 
1217                         i2c2: i2c@988000 {
1218                                 compatible = "qcom,geni-i2c";
1219                                 reg = <0x0 0x00988000 0x0 0x4000>;
1220                                 clock-names = "se";
1221                                 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
1222                                 pinctrl-names = "default";
1223                                 pinctrl-0 = <&qup_i2c2_data_clk>;
1224                                 interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
1225                                 #address-cells = <1>;
1226                                 #size-cells = <0>;
1227                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1228                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1229                                                 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1230                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1231                                 dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
1232                                        <&gpi_dma0 1 2 QCOM_GPI_I2C>;
1233                                 dma-names = "tx", "rx";
1234                                 status = "disabled";
1235                         };
1236 
1237                         spi2: spi@988000 {
1238                                 compatible = "qcom,geni-spi";
1239                                 reg = <0x0 0x00988000 0x0 0x4000>;
1240                                 clock-names = "se";
1241                                 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
1242                                 interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
1243                                 pinctrl-names = "default";
1244                                 pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
1245                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1246                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1247                                                 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1248                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1249                                 dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
1250                                        <&gpi_dma0 1 2 QCOM_GPI_SPI>;
1251                                 dma-names = "tx", "rx";
1252                                 #address-cells = <1>;
1253                                 #size-cells = <0>;
1254                                 status = "disabled";
1255                         };
1256 
1257 
1258                         i2c3: i2c@98c000 {
1259                                 compatible = "qcom,geni-i2c";
1260                                 reg = <0x0 0x0098c000 0x0 0x4000>;
1261                                 clock-names = "se";
1262                                 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
1263                                 pinctrl-names = "default";
1264                                 pinctrl-0 = <&qup_i2c3_data_clk>;
1265                                 interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
1266                                 #address-cells = <1>;
1267                                 #size-cells = <0>;
1268                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1269                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1270                                                 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1271                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1272                                 dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
1273                                        <&gpi_dma0 1 3 QCOM_GPI_I2C>;
1274                                 dma-names = "tx", "rx";
1275                                 status = "disabled";
1276                         };
1277 
1278                         spi3: spi@98c000 {
1279                                 compatible = "qcom,geni-spi";
1280                                 reg = <0x0 0x0098c000 0x0 0x4000>;
1281                                 clock-names = "se";
1282                                 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
1283                                 interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
1284                                 pinctrl-names = "default";
1285                                 pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
1286                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1287                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1288                                                 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1289                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1290                                 dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
1291                                        <&gpi_dma0 1 3 QCOM_GPI_SPI>;
1292                                 dma-names = "tx", "rx";
1293                                 #address-cells = <1>;
1294                                 #size-cells = <0>;
1295                                 status = "disabled";
1296                         };
1297 
1298                         i2c4: i2c@990000 {
1299                                 compatible = "qcom,geni-i2c";
1300                                 reg = <0x0 0x00990000 0x0 0x4000>;
1301                                 clock-names = "se";
1302                                 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
1303                                 pinctrl-names = "default";
1304                                 pinctrl-0 = <&qup_i2c4_data_clk>;
1305                                 interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
1306                                 #address-cells = <1>;
1307                                 #size-cells = <0>;
1308                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1309                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1310                                                 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1311                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1312                                 dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
1313                                        <&gpi_dma0 1 4 QCOM_GPI_I2C>;
1314                                 dma-names = "tx", "rx";
1315                                 status = "disabled";
1316                         };
1317 
1318                         spi4: spi@990000 {
1319                                 compatible = "qcom,geni-spi";
1320                                 reg = <0x0 0x00990000 0x0 0x4000>;
1321                                 clock-names = "se";
1322                                 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
1323                                 interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
1324                                 pinctrl-names = "default";
1325                                 pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
1326                                 power-domains = <&rpmhpd RPMHPD_CX>;
1327                                 operating-points-v2 = <&qup_opp_table_100mhz>;
1328                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1329                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1330                                                 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1331                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1332                                 dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
1333                                        <&gpi_dma0 1 4 QCOM_GPI_SPI>;
1334                                 dma-names = "tx", "rx";
1335                                 #address-cells = <1>;
1336                                 #size-cells = <0>;
1337                                 status = "disabled";
1338                         };
1339 
1340                         i2c5: i2c@994000 {
1341                                 compatible = "qcom,geni-i2c";
1342                                 reg = <0x0 0x00994000 0x0 0x4000>;
1343                                 clock-names = "se";
1344                                 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1345                                 pinctrl-names = "default";
1346                                 pinctrl-0 = <&qup_i2c5_data_clk>;
1347                                 interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1348                                 #address-cells = <1>;
1349                                 #size-cells = <0>;
1350                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1351                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1352                                                 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1353                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1354                                 dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
1355                                        <&gpi_dma0 1 5 QCOM_GPI_I2C>;
1356                                 dma-names = "tx", "rx";
1357                                 status = "disabled";
1358                         };
1359 
1360                         spi5: spi@994000 {
1361                                 compatible = "qcom,geni-spi";
1362                                 reg = <0x0 0x00994000 0x0 0x4000>;
1363                                 clock-names = "se";
1364                                 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
1365                                 interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
1366                                 pinctrl-names = "default";
1367                                 pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
1368                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1369                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1370                                                 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1371                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1372                                 dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
1373                                        <&gpi_dma0 1 5 QCOM_GPI_SPI>;
1374                                 dma-names = "tx", "rx";
1375                                 #address-cells = <1>;
1376                                 #size-cells = <0>;
1377                                 status = "disabled";
1378                         };
1379 
1380 
1381                         i2c6: i2c@998000 {
1382                                 compatible = "qcom,geni-i2c";
1383                                 reg = <0x0 0x00998000 0x0 0x4000>;
1384                                 clock-names = "se";
1385                                 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
1386                                 pinctrl-names = "default";
1387                                 pinctrl-0 = <&qup_i2c6_data_clk>;
1388                                 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
1389                                 #address-cells = <1>;
1390                                 #size-cells = <0>;
1391                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1392                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1393                                                 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1394                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1395                                 dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
1396                                        <&gpi_dma0 1 6 QCOM_GPI_I2C>;
1397                                 dma-names = "tx", "rx";
1398                                 status = "disabled";
1399                         };
1400 
1401                         spi6: spi@998000 {
1402                                 compatible = "qcom,geni-spi";
1403                                 reg = <0x0 0x00998000 0x0 0x4000>;
1404                                 clock-names = "se";
1405                                 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
1406                                 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
1407                                 pinctrl-names = "default";
1408                                 pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
1409                                 interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
1410                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1411                                                 <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
1412                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1413                                 dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
1414                                        <&gpi_dma0 1 6 QCOM_GPI_SPI>;
1415                                 dma-names = "tx", "rx";
1416                                 #address-cells = <1>;
1417                                 #size-cells = <0>;
1418                                 status = "disabled";
1419                         };
1420 
1421                         uart7: serial@99c000 {
1422                                 compatible = "qcom,geni-debug-uart";
1423                                 reg = <0 0x0099c000 0 0x4000>;
1424                                 clock-names = "se";
1425                                 clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
1426                                 pinctrl-names = "default";
1427                                 pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
1428                                 interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
1429                                 interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
1430                                                  &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
1431                                                 <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
1432                                                  &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
1433                                 interconnect-names = "qup-core",
1434                                                      "qup-config";
1435                                 status = "disabled";
1436                         };
1437                 };
1438 
1439                 gpi_dma1: dma-controller@a00000 {
1440                         compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
1441                         #dma-cells = <3>;
1442                         reg = <0 0x00a00000 0 0x60000>;
1443                         interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
1444                                      <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
1445                                      <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
1446                                      <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
1447                                      <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
1448                                      <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
1449                                      <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
1450                                      <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
1451                                      <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
1452                                      <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
1453                                      <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
1454                                      <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
1455                         dma-channels = <12>;
1456                         dma-channel-mask = <0x7e>;
1457                         iommus = <&apps_smmu 0x56 0x0>;
1458                         status = "disabled";
1459                 };
1460 
1461                 qupv3_id_1: geniqup@ac0000 {
1462                         compatible = "qcom,geni-se-qup";
1463                         reg = <0x0 0x00ac0000 0x0 0x6000>;
1464                         clock-names = "m-ahb", "s-ahb";
1465                         clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
1466                                  <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
1467                         iommus = <&apps_smmu 0x43 0x0>;
1468                         interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>;
1469                         interconnect-names = "qup-core";
1470                         #address-cells = <2>;
1471                         #size-cells = <2>;
1472                         ranges;
1473                         status = "disabled";
1474 
1475                         i2c8: i2c@a80000 {
1476                                 compatible = "qcom,geni-i2c";
1477                                 reg = <0x0 0x00a80000 0x0 0x4000>;
1478                                 clock-names = "se";
1479                                 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1480                                 pinctrl-names = "default";
1481                                 pinctrl-0 = <&qup_i2c8_data_clk>;
1482                                 interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1483                                 #address-cells = <1>;
1484                                 #size-cells = <0>;
1485                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1486                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1487                                                 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1488                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1489                                 dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
1490                                        <&gpi_dma1 1 0 QCOM_GPI_I2C>;
1491                                 dma-names = "tx", "rx";
1492                                 status = "disabled";
1493                         };
1494 
1495                         spi8: spi@a80000 {
1496                                 compatible = "qcom,geni-spi";
1497                                 reg = <0x0 0x00a80000 0x0 0x4000>;
1498                                 clock-names = "se";
1499                                 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1500                                 interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
1501                                 pinctrl-names = "default";
1502                                 pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
1503                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1504                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1505                                                 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1506                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1507                                 dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
1508                                        <&gpi_dma1 1 0 QCOM_GPI_SPI>;
1509                                 dma-names = "tx", "rx";
1510                                 #address-cells = <1>;
1511                                 #size-cells = <0>;
1512                                 status = "disabled";
1513                         };
1514 
1515                         i2c9: i2c@a84000 {
1516                                 compatible = "qcom,geni-i2c";
1517                                 reg = <0x0 0x00a84000 0x0 0x4000>;
1518                                 clock-names = "se";
1519                                 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1520                                 pinctrl-names = "default";
1521                                 pinctrl-0 = <&qup_i2c9_data_clk>;
1522                                 interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1523                                 #address-cells = <1>;
1524                                 #size-cells = <0>;
1525                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1526                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1527                                                 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1528                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1529                                 dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
1530                                        <&gpi_dma1 1 1 QCOM_GPI_I2C>;
1531                                 dma-names = "tx", "rx";
1532                                 status = "disabled";
1533                         };
1534 
1535                         spi9: spi@a84000 {
1536                                 compatible = "qcom,geni-spi";
1537                                 reg = <0x0 0x00a84000 0x0 0x4000>;
1538                                 clock-names = "se";
1539                                 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1540                                 interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
1541                                 pinctrl-names = "default";
1542                                 pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
1543                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1544                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1545                                                 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1546                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1547                                 dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
1548                                        <&gpi_dma1 1 1 QCOM_GPI_SPI>;
1549                                 dma-names = "tx", "rx";
1550                                 #address-cells = <1>;
1551                                 #size-cells = <0>;
1552                                 status = "disabled";
1553                         };
1554 
1555                         i2c10: i2c@a88000 {
1556                                 compatible = "qcom,geni-i2c";
1557                                 reg = <0x0 0x00a88000 0x0 0x4000>;
1558                                 clock-names = "se";
1559                                 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1560                                 pinctrl-names = "default";
1561                                 pinctrl-0 = <&qup_i2c10_data_clk>;
1562                                 interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1563                                 #address-cells = <1>;
1564                                 #size-cells = <0>;
1565                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1566                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1567                                                 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1568                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1569                                 dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
1570                                        <&gpi_dma1 1 2 QCOM_GPI_I2C>;
1571                                 dma-names = "tx", "rx";
1572                                 status = "disabled";
1573                         };
1574 
1575                         spi10: spi@a88000 {
1576                                 compatible = "qcom,geni-spi";
1577                                 reg = <0x0 0x00a88000 0x0 0x4000>;
1578                                 clock-names = "se";
1579                                 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1580                                 interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
1581                                 pinctrl-names = "default";
1582                                 pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
1583                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1584                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1585                                                 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1586                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1587                                 dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
1588                                        <&gpi_dma1 1 2 QCOM_GPI_SPI>;
1589                                 dma-names = "tx", "rx";
1590                                 #address-cells = <1>;
1591                                 #size-cells = <0>;
1592                                 status = "disabled";
1593                         };
1594 
1595                         i2c11: i2c@a8c000 {
1596                                 compatible = "qcom,geni-i2c";
1597                                 reg = <0x0 0x00a8c000 0x0 0x4000>;
1598                                 clock-names = "se";
1599                                 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1600                                 pinctrl-names = "default";
1601                                 pinctrl-0 = <&qup_i2c11_data_clk>;
1602                                 interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1603                                 #address-cells = <1>;
1604                                 #size-cells = <0>;
1605                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1606                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1607                                                 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1608                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1609                                 dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
1610                                        <&gpi_dma1 1 3 QCOM_GPI_I2C>;
1611                                 dma-names = "tx", "rx";
1612                                 status = "disabled";
1613                         };
1614 
1615                         spi11: spi@a8c000 {
1616                                 compatible = "qcom,geni-spi";
1617                                 reg = <0x0 0x00a8c000 0x0 0x4000>;
1618                                 clock-names = "se";
1619                                 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1620                                 interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
1621                                 pinctrl-names = "default";
1622                                 pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
1623                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1624                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1625                                                 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1626                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1627                                 dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
1628                                        <&gpi_dma1 1 3 QCOM_GPI_SPI>;
1629                                 dma-names = "tx", "rx";
1630                                 #address-cells = <1>;
1631                                 #size-cells = <0>;
1632                                 status = "disabled";
1633                         };
1634 
1635                         i2c12: i2c@a90000 {
1636                                 compatible = "qcom,geni-i2c";
1637                                 reg = <0x0 0x00a90000 0x0 0x4000>;
1638                                 clock-names = "se";
1639                                 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1640                                 pinctrl-names = "default";
1641                                 pinctrl-0 = <&qup_i2c12_data_clk>;
1642                                 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1643                                 #address-cells = <1>;
1644                                 #size-cells = <0>;
1645                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1646                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1647                                                 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1648                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1649                                 dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
1650                                        <&gpi_dma1 1 4 QCOM_GPI_I2C>;
1651                                 dma-names = "tx", "rx";
1652                                 status = "disabled";
1653                         };
1654 
1655                         spi12: spi@a90000 {
1656                                 compatible = "qcom,geni-spi";
1657                                 reg = <0x0 0x00a90000 0x0 0x4000>;
1658                                 clock-names = "se";
1659                                 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1660                                 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
1661                                 pinctrl-names = "default";
1662                                 pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
1663                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1664                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1665                                                 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1666                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1667                                 dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
1668                                        <&gpi_dma1 1 4 QCOM_GPI_SPI>;
1669                                 dma-names = "tx", "rx";
1670                                 #address-cells = <1>;
1671                                 #size-cells = <0>;
1672                                 status = "disabled";
1673                         };
1674 
1675                         i2c13: i2c@a94000 {
1676                                 compatible = "qcom,geni-i2c";
1677                                 reg = <0 0x00a94000 0 0x4000>;
1678                                 clock-names = "se";
1679                                 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1680                                 pinctrl-names = "default";
1681                                 pinctrl-0 = <&qup_i2c13_data_clk>;
1682                                 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1683                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1684                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1685                                                 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1686                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1687                                 dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
1688                                        <&gpi_dma1 1 5 QCOM_GPI_I2C>;
1689                                 dma-names = "tx", "rx";
1690                                 #address-cells = <1>;
1691                                 #size-cells = <0>;
1692                                 status = "disabled";
1693                         };
1694 
1695                         spi13: spi@a94000 {
1696                                 compatible = "qcom,geni-spi";
1697                                 reg = <0x0 0x00a94000 0x0 0x4000>;
1698                                 clock-names = "se";
1699                                 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
1700                                 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
1701                                 pinctrl-names = "default";
1702                                 pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
1703                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1704                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1705                                                 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1706                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1707                                 dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
1708                                        <&gpi_dma1 1 5 QCOM_GPI_SPI>;
1709                                 dma-names = "tx", "rx";
1710                                 #address-cells = <1>;
1711                                 #size-cells = <0>;
1712                                 status = "disabled";
1713                         };
1714 
1715                         i2c14: i2c@a98000 {
1716                                 compatible = "qcom,geni-i2c";
1717                                 reg = <0 0x00a98000 0 0x4000>;
1718                                 clock-names = "se";
1719                                 clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
1720                                 pinctrl-names = "default";
1721                                 pinctrl-0 = <&qup_i2c14_data_clk>;
1722                                 interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
1723                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1724                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1725                                                 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1726                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1727                                 dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
1728                                        <&gpi_dma1 1 6 QCOM_GPI_I2C>;
1729                                 dma-names = "tx", "rx";
1730                                 #address-cells = <1>;
1731                                 #size-cells = <0>;
1732                                 status = "disabled";
1733                         };
1734 
1735                         spi14: spi@a98000 {
1736                                 compatible = "qcom,geni-spi";
1737                                 reg = <0x0 0x00a98000 0x0 0x4000>;
1738                                 clock-names = "se";
1739                                 clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
1740                                 interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
1741                                 pinctrl-names = "default";
1742                                 pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
1743                                 interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
1744                                                 <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
1745                                                 <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
1746                                 interconnect-names = "qup-core", "qup-config", "qup-memory";
1747                                 dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
1748                                        <&gpi_dma1 1 6 QCOM_GPI_SPI>;
1749                                 dma-names = "tx", "rx";
1750                                 #address-cells = <1>;
1751                                 #size-cells = <0>;
1752                                 status = "disabled";
1753                         };
1754                 };
1755 
1756                 rng: rng@10c3000 {
1757                         compatible = "qcom,sm8450-trng", "qcom,trng";
1758                         reg = <0 0x010c3000 0 0x1000>;
1759                 };
1760 
1761                 pcie0: pcie@1c00000 {
1762                         compatible = "qcom,pcie-sm8450-pcie0";
1763                         reg = <0 0x01c00000 0 0x3000>,
1764                               <0 0x60000000 0 0xf1d>,
1765                               <0 0x60000f20 0 0xa8>,
1766                               <0 0x60001000 0 0x1000>,
1767                               <0 0x60100000 0 0x100000>;
1768                         reg-names = "parf", "dbi", "elbi", "atu", "config";
1769                         device_type = "pci";
1770                         linux,pci-domain = <0>;
1771                         bus-range = <0x00 0xff>;
1772                         num-lanes = <1>;
1773 
1774                         #address-cells = <3>;
1775                         #size-cells = <2>;
1776 
1777                         ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
1778                                  <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
1779 
1780                         msi-map = <0x0 &gic_its 0x5980 0x1>,
1781                                   <0x100 &gic_its 0x5981 0x1>;
1782                         msi-map-mask = <0xff00>;
1783                         interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
1784                                      <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
1785                                      <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
1786                                      <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
1787                                      <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
1788                                      <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
1789                                      <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
1790                                      <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
1791                         interrupt-names = "msi0",
1792                                           "msi1",
1793                                           "msi2",
1794                                           "msi3",
1795                                           "msi4",
1796                                           "msi5",
1797                                           "msi6",
1798                                           "msi7";
1799                         #interrupt-cells = <1>;
1800                         interrupt-map-mask = <0 0 0 0x7>;
1801                         interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1802                                         <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1803                                         <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1804                                         <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1805 
1806                         interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
1807                                          &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
1808                                         <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
1809                                          &config_noc SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>;
1810                         interconnect-names = "pcie-mem", "cpu-pcie";
1811 
1812                         clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
1813                                  <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
1814                                  <&pcie0_phy>,
1815                                  <&rpmhcc RPMH_CXO_CLK>,
1816                                  <&gcc GCC_PCIE_0_AUX_CLK>,
1817                                  <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
1818                                  <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
1819                                  <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
1820                                  <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
1821                                  <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
1822                                  <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
1823                                  <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
1824                         clock-names = "pipe",
1825                                       "pipe_mux",
1826                                       "phy_pipe",
1827                                       "ref",
1828                                       "aux",
1829                                       "cfg",
1830                                       "bus_master",
1831                                       "bus_slave",
1832                                       "slave_q2a",
1833                                       "ddrss_sf_tbu",
1834                                       "aggre0",
1835                                       "aggre1";
1836 
1837                         iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
1838                                     <0x100 &apps_smmu 0x1c01 0x1>;
1839 
1840                         resets = <&gcc GCC_PCIE_0_BCR>;
1841                         reset-names = "pci";
1842 
1843                         power-domains = <&gcc PCIE_0_GDSC>;
1844 
1845                         phys = <&pcie0_phy>;
1846                         phy-names = "pciephy";
1847 
1848                         perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
1849                         wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
1850 
1851                         pinctrl-names = "default";
1852                         pinctrl-0 = <&pcie0_default_state>;
1853 
1854                         operating-points-v2 = <&pcie0_opp_table>;
1855 
1856                         status = "disabled";
1857 
1858                         pcie0_opp_table: opp-table {
1859                                 compatible = "operating-points-v2";
1860 
1861                                 /* GEN 1 x1 */
1862                                 opp-2500000 {
1863                                         opp-hz = /bits/ 64 <2500000>;
1864                                         required-opps = <&rpmhpd_opp_low_svs>;
1865                                         opp-peak-kBps = <250000 1>;
1866                                 };
1867 
1868                                 /* GEN 2 x1 */
1869                                 opp-5000000 {
1870                                         opp-hz = /bits/ 64 <5000000>;
1871                                         required-opps = <&rpmhpd_opp_low_svs>;
1872                                         opp-peak-kBps = <500000 1>;
1873                                 };
1874 
1875                                 /* GEN 3 x1 */
1876                                 opp-8000000 {
1877                                         opp-hz = /bits/ 64 <8000000>;
1878                                         required-opps = <&rpmhpd_opp_nom>;
1879                                         opp-peak-kBps = <984500 1>;
1880                                 };
1881                         };
1882 
1883                         pcie@0 {
1884                                 device_type = "pci";
1885                                 reg = <0x0 0x0 0x0 0x0 0x0>;
1886                                 bus-range = <0x01 0xff>;
1887 
1888                                 #address-cells = <3>;
1889                                 #size-cells = <2>;
1890                                 ranges;
1891                         };
1892                 };
1893 
1894                 pcie0_phy: phy@1c06000 {
1895                         compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy";
1896                         reg = <0 0x01c06000 0 0x2000>;
1897 
1898                         clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
1899                                  <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
1900                                  <&gcc GCC_PCIE_0_CLKREF_EN>,
1901                                  <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
1902                                  <&gcc GCC_PCIE_0_PIPE_CLK>;
1903                         clock-names = "aux",
1904                                       "cfg_ahb",
1905                                       "ref",
1906                                       "rchng",
1907                                       "pipe";
1908 
1909                         clock-output-names = "pcie_0_pipe_clk";
1910                         #clock-cells = <0>;
1911 
1912                         #phy-cells = <0>;
1913 
1914                         resets = <&gcc GCC_PCIE_0_PHY_BCR>;
1915                         reset-names = "phy";
1916 
1917                         assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
1918                         assigned-clock-rates = <100000000>;
1919 
1920                         status = "disabled";
1921                 };
1922 
1923                 pcie1: pcie@1c08000 {
1924                         compatible = "qcom,pcie-sm8450-pcie1";
1925                         reg = <0 0x01c08000 0 0x3000>,
1926                               <0 0x40000000 0 0xf1d>,
1927                               <0 0x40000f20 0 0xa8>,
1928                               <0 0x40001000 0 0x1000>,
1929                               <0 0x40100000 0 0x100000>;
1930                         reg-names = "parf", "dbi", "elbi", "atu", "config";
1931                         device_type = "pci";
1932                         linux,pci-domain = <1>;
1933                         bus-range = <0x00 0xff>;
1934                         num-lanes = <2>;
1935 
1936                         #address-cells = <3>;
1937                         #size-cells = <2>;
1938 
1939                         ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
1940                                  <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
1941 
1942                         msi-map = <0x0 &gic_its 0x5a00 0x1>,
1943                                   <0x100 &gic_its 0x5a01 0x1>;
1944                         msi-map-mask = <0xff00>;
1945                         interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
1946                                      <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
1947                                      <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
1948                                      <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
1949                                      <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
1950                                      <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
1951                                      <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
1952                                      <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
1953                         interrupt-names = "msi0",
1954                                           "msi1",
1955                                           "msi2",
1956                                           "msi3",
1957                                           "msi4",
1958                                           "msi5",
1959                                           "msi6",
1960                                           "msi7";
1961                         #interrupt-cells = <1>;
1962                         interrupt-map-mask = <0 0 0 0x7>;
1963                         interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1964                                         <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1965                                         <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1966                                         <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1967 
1968                         interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
1969                                          &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
1970                                         <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
1971                                          &config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>;
1972                         interconnect-names = "pcie-mem", "cpu-pcie";
1973 
1974                         clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
1975                                  <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
1976                                  <&pcie1_phy QMP_PCIE_PIPE_CLK>,
1977                                  <&rpmhcc RPMH_CXO_CLK>,
1978                                  <&gcc GCC_PCIE_1_AUX_CLK>,
1979                                  <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
1980                                  <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
1981                                  <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
1982                                  <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
1983                                  <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
1984                                  <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
1985                         clock-names = "pipe",
1986                                       "pipe_mux",
1987                                       "phy_pipe",
1988                                       "ref",
1989                                       "aux",
1990                                       "cfg",
1991                                       "bus_master",
1992                                       "bus_slave",
1993                                       "slave_q2a",
1994                                       "ddrss_sf_tbu",
1995                                       "aggre1";
1996 
1997                         iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,
1998                                     <0x100 &apps_smmu 0x1c81 0x1>;
1999 
2000                         resets = <&gcc GCC_PCIE_1_BCR>;
2001                         reset-names = "pci";
2002 
2003                         power-domains = <&gcc PCIE_1_GDSC>;
2004 
2005                         phys = <&pcie1_phy>;
2006                         phy-names = "pciephy";
2007 
2008                         perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
2009                         wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
2010 
2011                         pinctrl-names = "default";
2012                         pinctrl-0 = <&pcie1_default_state>;
2013 
2014                         operating-points-v2 = <&pcie1_opp_table>;
2015 
2016                         status = "disabled";
2017 
2018                         pcie1_opp_table: opp-table {
2019                                 compatible = "operating-points-v2";
2020 
2021                                 /* GEN 1 x1 */
2022                                 opp-2500000 {
2023                                         opp-hz = /bits/ 64 <2500000>;
2024                                         required-opps = <&rpmhpd_opp_low_svs>;
2025                                         opp-peak-kBps = <250000 1>;
2026                                 };
2027 
2028                                 /* GEN 1 x2 and GEN 2 x1 */
2029                                 opp-5000000 {
2030                                         opp-hz = /bits/ 64 <5000000>;
2031                                         required-opps = <&rpmhpd_opp_low_svs>;
2032                                         opp-peak-kBps = <500000 1>;
2033                                 };
2034 
2035                                 /* GEN 2 x2 */
2036                                 opp-10000000 {
2037                                         opp-hz = /bits/ 64 <10000000>;
2038                                         required-opps = <&rpmhpd_opp_low_svs>;
2039                                         opp-peak-kBps = <1000000 1>;
2040                                 };
2041 
2042                                 /* GEN 3 x1 */
2043                                 opp-8000000 {
2044                                         opp-hz = /bits/ 64 <8000000>;
2045                                         required-opps = <&rpmhpd_opp_nom>;
2046                                         opp-peak-kBps = <984500 1>;
2047                                 };
2048 
2049                                 /* GEN 3 x2 and GEN 4 x1 */
2050                                 opp-16000000 {
2051                                         opp-hz = /bits/ 64 <16000000>;
2052                                         required-opps = <&rpmhpd_opp_nom>;
2053                                         opp-peak-kBps = <1969000 1>;
2054                                 };
2055 
2056                                 /* GEN 4 x2 */
2057                                 opp-32000000 {
2058                                         opp-hz = /bits/ 64 <32000000>;
2059                                         required-opps = <&rpmhpd_opp_nom>;
2060                                         opp-peak-kBps = <3938000 1>;
2061                                 };
2062                         };
2063 
2064                         pcie@0 {
2065                                 device_type = "pci";
2066                                 reg = <0x0 0x0 0x0 0x0 0x0>;
2067                                 bus-range = <0x01 0xff>;
2068 
2069                                 #address-cells = <3>;
2070                                 #size-cells = <2>;
2071                                 ranges;
2072                         };
2073                 };
2074 
2075                 pcie1_phy: phy@1c0e000 {
2076                         compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy";
2077                         reg = <0 0x01c0e000 0 0x2000>;
2078 
2079                         clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
2080                                  <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
2081                                  <&gcc GCC_PCIE_1_CLKREF_EN>,
2082                                  <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
2083                                  <&gcc GCC_PCIE_1_PIPE_CLK>;
2084                         clock-names = "aux",
2085                                       "cfg_ahb",
2086                                       "ref",
2087                                       "rchng",
2088                                       "pipe";
2089 
2090                         clock-output-names = "pcie_1_pipe_clk";
2091                         #clock-cells = <1>;
2092 
2093                         #phy-cells = <0>;
2094 
2095                         resets = <&gcc GCC_PCIE_1_PHY_BCR>;
2096                         reset-names = "phy";
2097 
2098                         assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
2099                         assigned-clock-rates = <100000000>;
2100 
2101                         status = "disabled";
2102                 };
2103 
2104                 config_noc: interconnect@1500000 {
2105                         compatible = "qcom,sm8450-config-noc";
2106                         reg = <0 0x01500000 0 0x1c000>;
2107                         #interconnect-cells = <2>;
2108                         qcom,bcm-voters = <&apps_bcm_voter>;
2109                 };
2110 
2111                 system_noc: interconnect@1680000 {
2112                         compatible = "qcom,sm8450-system-noc";
2113                         reg = <0 0x01680000 0 0x1e200>;
2114                         #interconnect-cells = <2>;
2115                         qcom,bcm-voters = <&apps_bcm_voter>;
2116                 };
2117 
2118                 pcie_noc: interconnect@16c0000 {
2119                         compatible = "qcom,sm8450-pcie-anoc";
2120                         reg = <0 0x016c0000 0 0xe280>;
2121                         #interconnect-cells = <2>;
2122                         qcom,bcm-voters = <&apps_bcm_voter>;
2123                 };
2124 
2125                 aggre1_noc: interconnect@16e0000 {
2126                         compatible = "qcom,sm8450-aggre1-noc";
2127                         reg = <0 0x016e0000 0 0x1c080>;
2128                         #interconnect-cells = <2>;
2129                         clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
2130                                  <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
2131                         qcom,bcm-voters = <&apps_bcm_voter>;
2132                 };
2133 
2134                 aggre2_noc: interconnect@1700000 {
2135                         compatible = "qcom,sm8450-aggre2-noc";
2136                         reg = <0 0x01700000 0 0x31080>;
2137                         #interconnect-cells = <2>;
2138                         qcom,bcm-voters = <&apps_bcm_voter>;
2139                         clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
2140                                  <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
2141                                  <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
2142                                  <&rpmhcc RPMH_IPA_CLK>;
2143                 };
2144 
2145                 mmss_noc: interconnect@1740000 {
2146                         compatible = "qcom,sm8450-mmss-noc";
2147                         reg = <0 0x01740000 0 0x1f080>;
2148                         #interconnect-cells = <2>;
2149                         qcom,bcm-voters = <&apps_bcm_voter>;
2150                 };
2151 
2152                 tcsr_mutex: hwlock@1f40000 {
2153                         compatible = "qcom,tcsr-mutex";
2154                         reg = <0x0 0x01f40000 0x0 0x40000>;
2155                         #hwlock-cells = <1>;
2156                 };
2157 
2158                 tcsr: syscon@1fc0000 {
2159                         compatible = "qcom,sm8450-tcsr", "syscon";
2160                         reg = <0x0 0x1fc0000 0x0 0x30000>;
2161                 };
2162 
2163                 gpu: gpu@3d00000 {
2164                         compatible = "qcom,adreno-730.1", "qcom,adreno";
2165                         reg = <0x0 0x03d00000 0x0 0x40000>,
2166                               <0x0 0x03d9e000 0x0 0x1000>,
2167                               <0x0 0x03d61000 0x0 0x800>;
2168                         reg-names = "kgsl_3d0_reg_memory",
2169                                     "cx_mem",
2170                                     "cx_dbgc";
2171 
2172                         interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
2173 
2174                         iommus = <&adreno_smmu 0 0x400>,
2175                                  <&adreno_smmu 1 0x400>;
2176 
2177                         operating-points-v2 = <&gpu_opp_table>;
2178 
2179                         qcom,gmu = <&gmu>;
2180                         #cooling-cells = <2>;
2181 
2182                         status = "disabled";
2183 
2184                         zap-shader {
2185                                 memory-region = <&gpu_micro_code_mem>;
2186                         };
2187 
2188                         gpu_opp_table: opp-table {
2189                                 compatible = "operating-points-v2";
2190 
2191                                 opp-818000000 {
2192                                         opp-hz = /bits/ 64 <818000000>;
2193                                         opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
2194                                 };
2195 
2196                                 opp-791000000 {
2197                                         opp-hz = /bits/ 64 <791000000>;
2198                                         opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
2199                                 };
2200 
2201                                 opp-734000000 {
2202                                         opp-hz = /bits/ 64 <734000000>;
2203                                         opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
2204                                 };
2205 
2206                                 opp-640000000 {
2207                                         opp-hz = /bits/ 64 <640000000>;
2208                                         opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
2209                                 };
2210 
2211                                 opp-599000000 {
2212                                         opp-hz = /bits/ 64 <599000000>;
2213                                         opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
2214                                 };
2215 
2216                                 opp-545000000 {
2217                                         opp-hz = /bits/ 64 <545000000>;
2218                                         opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
2219                                 };
2220 
2221                                 opp-492000000 {
2222                                         opp-hz = /bits/ 64 <492000000>;
2223                                         opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
2224                                 };
2225 
2226                                 opp-421000000 {
2227                                         opp-hz = /bits/ 64 <421000000>;
2228                                         opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
2229                                 };
2230 
2231                                 opp-350000000 {
2232                                         opp-hz = /bits/ 64 <350000000>;
2233                                         opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
2234                                 };
2235 
2236                                 opp-317000000 {
2237                                         opp-hz = /bits/ 64 <317000000>;
2238                                         opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
2239                                 };
2240 
2241                                 opp-285000000 {
2242                                         opp-hz = /bits/ 64 <285000000>;
2243                                         opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
2244                                 };
2245 
2246                                 opp-220000000 {
2247                                         opp-hz = /bits/ 64 <220000000>;
2248                                         opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
2249                                 };
2250                         };
2251                 };
2252 
2253                 gmu: gmu@3d6a000 {
2254                         compatible = "qcom,adreno-gmu-730.1", "qcom,adreno-gmu";
2255                         reg = <0x0 0x03d6a000 0x0 0x35000>,
2256                               <0x0 0x03d50000 0x0 0x10000>,
2257                               <0x0 0x0b290000 0x0 0x10000>;
2258                         reg-names = "gmu", "rscc", "gmu_pdc";
2259 
2260                         interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
2261                                      <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
2262                         interrupt-names = "hfi", "gmu";
2263 
2264                         clocks = <&gpucc GPU_CC_AHB_CLK>,
2265                                  <&gpucc GPU_CC_CX_GMU_CLK>,
2266                                  <&gpucc GPU_CC_CXO_CLK>,
2267                                  <&gcc GCC_DDRSS_GPU_AXI_CLK>,
2268                                  <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
2269                                  <&gpucc GPU_CC_HUB_CX_INT_CLK>,
2270                                  <&gpucc GPU_CC_DEMET_CLK>;
2271                         clock-names = "ahb",
2272                                       "gmu",
2273                                       "cxo",
2274                                       "axi",
2275                                       "memnoc",
2276                                       "hub",
2277                                       "demet";
2278 
2279                         power-domains = <&gpucc GPU_CX_GDSC>,
2280                                         <&gpucc GPU_GX_GDSC>;
2281                         power-domain-names = "cx",
2282                                              "gx";
2283 
2284                         iommus = <&adreno_smmu 5 0x400>;
2285 
2286                         qcom,qmp = <&aoss_qmp>;
2287 
2288                         operating-points-v2 = <&gmu_opp_table>;
2289 
2290                         gmu_opp_table: opp-table {
2291                                 compatible = "operating-points-v2";
2292 
2293                                 opp-500000000 {
2294                                         opp-hz = /bits/ 64 <500000000>;
2295                                         opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
2296                                 };
2297 
2298                                 opp-200000000 {
2299                                         opp-hz = /bits/ 64 <200000000>;
2300                                         opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
2301                                 };
2302                         };
2303                 };
2304 
2305                 gpucc: clock-controller@3d90000 {
2306                         compatible = "qcom,sm8450-gpucc";
2307                         reg = <0x0 0x03d90000 0x0 0xa000>;
2308                         clocks = <&rpmhcc RPMH_CXO_CLK>,
2309                                  <&gcc GCC_GPU_GPLL0_CLK_SRC>,
2310                                  <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
2311                         #clock-cells = <1>;
2312                         #reset-cells = <1>;
2313                         #power-domain-cells = <1>;
2314                 };
2315 
2316                 adreno_smmu: iommu@3da0000 {
2317                         compatible = "qcom,sm8450-smmu-500", "qcom,adreno-smmu",
2318                                      "qcom,smmu-500", "arm,mmu-500";
2319                         reg = <0x0 0x03da0000 0x0 0x40000>;
2320                         #iommu-cells = <2>;
2321                         #global-interrupts = <1>;
2322                         interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
2323                                      <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
2324                                      <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
2325                                      <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
2326                                      <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
2327                                      <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
2328                                      <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
2329                                      <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
2330                                      <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
2331                                      <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
2332                                      <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
2333                                      <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
2334                                      <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
2335                                      <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
2336                                      <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
2337                                      <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
2338                                      <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
2339                                      <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
2340                                      <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
2341                                      <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
2342                                      <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
2343                                      <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
2344                                      <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
2345                                      <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
2346                                      <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>,
2347                                      <GIC_SPI 700 IRQ_TYPE_LEVEL_HIGH>;
2348                         clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
2349                                  <&gpucc GPU_CC_HUB_CX_INT_CLK>,
2350                                  <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
2351                                  <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
2352                                  <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
2353                                  <&gpucc GPU_CC_AHB_CLK>;
2354                         clock-names = "gmu",
2355                                       "hub",
2356                                       "hlos",
2357                                       "bus",
2358                                       "iface",
2359                                       "ahb";
2360                         power-domains = <&gpucc GPU_CX_GDSC>;
2361                         dma-coherent;
2362                 };
2363 
2364                 usb_1_hsphy: phy@88e3000 {
2365                         compatible = "qcom,sm8450-usb-hs-phy",
2366                                      "qcom,usb-snps-hs-7nm-phy";
2367                         reg = <0 0x088e3000 0 0x400>;
2368                         status = "disabled";
2369                         #phy-cells = <0>;
2370 
2371                         clocks = <&rpmhcc RPMH_CXO_CLK>;
2372                         clock-names = "ref";
2373 
2374                         resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
2375                 };
2376 
2377                 usb_1_qmpphy: phy@88e8000 {
2378                         compatible = "qcom,sm8450-qmp-usb3-dp-phy";
2379                         reg = <0 0x088e8000 0 0x3000>;
2380 
2381                         clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
2382                                  <&rpmhcc RPMH_CXO_CLK>,
2383                                  <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
2384                                  <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
2385                         clock-names = "aux", "ref", "com_aux", "usb3_pipe";
2386 
2387                         resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
2388                                  <&gcc GCC_USB3_PHY_PRIM_BCR>;
2389                         reset-names = "phy", "common";
2390 
2391                         #clock-cells = <1>;
2392                         #phy-cells = <1>;
2393 
2394                         orientation-switch;
2395 
2396                         status = "disabled";
2397 
2398                         ports {
2399                                 #address-cells = <1>;
2400                                 #size-cells = <0>;
2401 
2402                                 port@0 {
2403                                         reg = <0>;
2404 
2405                                         usb_1_qmpphy_out: endpoint {
2406                                         };
2407                                 };
2408 
2409                                 port@1 {
2410                                         reg = <1>;
2411 
2412                                         usb_1_qmpphy_usb_ss_in: endpoint {
2413                                                 remote-endpoint = <&usb_1_dwc3_ss>;
2414                                         };
2415                                 };
2416 
2417                                 port@2 {
2418                                         reg = <2>;
2419 
2420                                         usb_1_qmpphy_dp_in: endpoint {
2421                                                 remote-endpoint = <&mdss_dp0_out>;
2422                                         };
2423                                 };
2424                         };
2425                 };
2426 
2427                 remoteproc_slpi: remoteproc@2400000 {
2428                         compatible = "qcom,sm8450-slpi-pas";
2429                         reg = <0 0x02400000 0 0x4000>;
2430 
2431                         interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>,
2432                                               <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
2433                                               <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
2434                                               <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
2435                                               <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
2436                         interrupt-names = "wdog", "fatal", "ready",
2437                                           "handover", "stop-ack";
2438 
2439                         clocks = <&rpmhcc RPMH_CXO_CLK>;
2440                         clock-names = "xo";
2441 
2442                         power-domains = <&rpmhpd RPMHPD_LCX>,
2443                                         <&rpmhpd RPMHPD_LMX>;
2444                         power-domain-names = "lcx", "lmx";
2445 
2446                         memory-region = <&slpi_mem>;
2447 
2448                         qcom,qmp = <&aoss_qmp>;
2449 
2450                         qcom,smem-states = <&smp2p_slpi_out 0>;
2451                         qcom,smem-state-names = "stop";
2452 
2453                         status = "disabled";
2454 
2455                         glink-edge {
2456                                 interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
2457                                                              IPCC_MPROC_SIGNAL_GLINK_QMP
2458                                                              IRQ_TYPE_EDGE_RISING>;
2459                                 mboxes = <&ipcc IPCC_CLIENT_SLPI
2460                                                 IPCC_MPROC_SIGNAL_GLINK_QMP>;
2461 
2462                                 label = "slpi";
2463                                 qcom,remote-pid = <3>;
2464 
2465                                 fastrpc {
2466                                         compatible = "qcom,fastrpc";
2467                                         qcom,glink-channels = "fastrpcglink-apps-dsp";
2468                                         label = "sdsp";
2469                                         qcom,non-secure-domain;
2470                                         #address-cells = <1>;
2471                                         #size-cells = <0>;
2472 
2473                                         compute-cb@1 {
2474                                                 compatible = "qcom,fastrpc-compute-cb";
2475                                                 reg = <1>;
2476                                                 iommus = <&apps_smmu 0x0541 0x0>;
2477                                         };
2478 
2479                                         compute-cb@2 {
2480                                                 compatible = "qcom,fastrpc-compute-cb";
2481                                                 reg = <2>;
2482                                                 iommus = <&apps_smmu 0x0542 0x0>;
2483                                         };
2484 
2485                                         compute-cb@3 {
2486                                                 compatible = "qcom,fastrpc-compute-cb";
2487                                                 reg = <3>;
2488                                                 iommus = <&apps_smmu 0x0543 0x0>;
2489                                                 /* note: shared-cb = <4> in downstream */
2490                                         };
2491                                 };
2492                         };
2493                 };
2494 
2495                 wsa2macro: codec@31e0000 {
2496                         compatible = "qcom,sm8450-lpass-wsa-macro";
2497                         reg = <0 0x031e0000 0 0x1000>;
2498                         clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2499                                  <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2500                                  <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2501                                  <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2502                                  <&vamacro>;
2503                         clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
2504 
2505                         #clock-cells = <0>;
2506                         clock-output-names = "wsa2-mclk";
2507                         #sound-dai-cells = <1>;
2508                 };
2509 
2510                 swr4: soundwire@31f0000 {
2511                         compatible = "qcom,soundwire-v1.7.0";
2512                         reg = <0 0x031f0000 0 0x2000>;
2513                         interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
2514                         clocks = <&wsa2macro>;
2515                         clock-names = "iface";
2516                         label = "WSA2";
2517 
2518                         pinctrl-0 = <&wsa2_swr_active>;
2519                         pinctrl-names = "default";
2520 
2521                         qcom,din-ports = <2>;
2522                         qcom,dout-ports = <6>;
2523 
2524                         qcom,ports-sinterval-low =      /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
2525                         qcom,ports-offset1 =            /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
2526                         qcom,ports-offset2 =            /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
2527                         qcom,ports-hstart =             /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2528                         qcom,ports-hstop =              /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2529                         qcom,ports-word-length =        /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2530                         qcom,ports-block-pack-mode =    /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>;
2531                         qcom,ports-block-group-count =  /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2532                         qcom,ports-lane-control =       /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2533 
2534                         #address-cells = <2>;
2535                         #size-cells = <0>;
2536                         #sound-dai-cells = <1>;
2537                         status = "disabled";
2538                 };
2539 
2540                 rxmacro: codec@3200000 {
2541                         compatible = "qcom,sm8450-lpass-rx-macro";
2542                         reg = <0 0x03200000 0 0x1000>;
2543                         clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2544                                  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2545                                  <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2546                                  <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2547                                  <&vamacro>;
2548                         clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
2549 
2550                         #clock-cells = <0>;
2551                         clock-output-names = "mclk";
2552                         #sound-dai-cells = <1>;
2553                 };
2554 
2555                 swr1: soundwire@3210000 {
2556                         compatible = "qcom,soundwire-v1.7.0";
2557                         reg = <0 0x03210000 0 0x2000>;
2558                         interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
2559                         clocks = <&rxmacro>;
2560                         clock-names = "iface";
2561                         label = "RX";
2562                         qcom,din-ports = <0>;
2563                         qcom,dout-ports = <5>;
2564 
2565                         pinctrl-0 = <&rx_swr_active>;
2566                         pinctrl-names = "default";
2567 
2568                         qcom,ports-sinterval-low =      /bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
2569                         qcom,ports-offset1 =            /bits/ 8 <0x00 0x00 0x0b 0x01 0x00>;
2570                         qcom,ports-offset2 =            /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
2571                         qcom,ports-hstart =             /bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
2572                         qcom,ports-hstop =              /bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
2573                         qcom,ports-word-length =        /bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
2574                         qcom,ports-block-pack-mode =    /bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
2575                         qcom,ports-block-group-count =  /bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
2576                         qcom,ports-lane-control =       /bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
2577 
2578                         #address-cells = <2>;
2579                         #size-cells = <0>;
2580                         #sound-dai-cells = <1>;
2581                         status = "disabled";
2582                 };
2583 
2584                 txmacro: codec@3220000 {
2585                         compatible = "qcom,sm8450-lpass-tx-macro";
2586                         reg = <0 0x03220000 0 0x1000>;
2587                         clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2588                                  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2589                                  <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2590                                  <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2591                                  <&vamacro>;
2592                         clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
2593 
2594                         #clock-cells = <0>;
2595                         clock-output-names = "mclk";
2596                         #sound-dai-cells = <1>;
2597                 };
2598 
2599                 wsamacro: codec@3240000 {
2600                         compatible = "qcom,sm8450-lpass-wsa-macro";
2601                         reg = <0 0x03240000 0 0x1000>;
2602                         clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2603                                  <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2604                                  <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2605                                  <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2606                                  <&vamacro>;
2607                         clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
2608 
2609                         #clock-cells = <0>;
2610                         clock-output-names = "mclk";
2611                         #sound-dai-cells = <1>;
2612                 };
2613 
2614                 swr0: soundwire@3250000 {
2615                         compatible = "qcom,soundwire-v1.7.0";
2616                         reg = <0 0x03250000 0 0x2000>;
2617                         interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
2618                         clocks = <&wsamacro>;
2619                         clock-names = "iface";
2620                         label = "WSA";
2621 
2622                         pinctrl-0 = <&wsa_swr_active>;
2623                         pinctrl-names = "default";
2624 
2625                         qcom,din-ports = <2>;
2626                         qcom,dout-ports = <6>;
2627 
2628                         qcom,ports-sinterval-low =      /bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
2629                         qcom,ports-offset1 =            /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
2630                         qcom,ports-offset2 =            /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
2631                         qcom,ports-hstart =             /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2632                         qcom,ports-hstop =              /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2633                         qcom,ports-word-length =        /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2634                         qcom,ports-block-pack-mode =    /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>;
2635                         qcom,ports-block-group-count =  /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2636                         qcom,ports-lane-control =       /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
2637 
2638                         #address-cells = <2>;
2639                         #size-cells = <0>;
2640                         #sound-dai-cells = <1>;
2641                         status = "disabled";
2642                 };
2643 
2644                 swr2: soundwire@33b0000 {
2645                         compatible = "qcom,soundwire-v1.7.0";
2646                         reg = <0 0x033b0000 0 0x2000>;
2647                         interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
2648                                      <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
2649                         interrupt-names = "core", "wakeup";
2650 
2651                         clocks = <&txmacro>;
2652                         clock-names = "iface";
2653                         label = "TX";
2654 
2655                         pinctrl-0 = <&tx_swr_active>;
2656                         pinctrl-names = "default";
2657 
2658                         qcom,din-ports = <4>;
2659                         qcom,dout-ports = <0>;
2660                         qcom,ports-sinterval-low =      /bits/ 8 <0x01 0x01 0x03 0x03>;
2661                         qcom,ports-offset1 =            /bits/ 8 <0x00 0x00 0x01 0x01>;
2662                         qcom,ports-offset2 =            /bits/ 8 <0x00 0x00 0x00 0x00>;
2663                         qcom,ports-hstart =             /bits/ 8 <0xff 0xff 0xff 0xff>;
2664                         qcom,ports-hstop =              /bits/ 8 <0xff 0xff 0xff 0xff>;
2665                         qcom,ports-word-length =        /bits/ 8 <0xff 0xff 0xff 0xff>;
2666                         qcom,ports-block-pack-mode =    /bits/ 8 <0xff 0xff 0xff 0xff>;
2667                         qcom,ports-block-group-count =  /bits/ 8 <0xff 0xff 0xff 0xff>;
2668                         qcom,ports-lane-control =       /bits/ 8 <0x01 0x02 0x00 0x00>;
2669 
2670                         #address-cells = <2>;
2671                         #size-cells = <0>;
2672                         #sound-dai-cells = <1>;
2673                         status = "disabled";
2674                 };
2675 
2676                 vamacro: codec@33f0000 {
2677                         compatible = "qcom,sm8450-lpass-va-macro";
2678                         reg = <0 0x033f0000 0 0x1000>;
2679                         clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2680                                  <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2681                                  <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
2682                                  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
2683                         clock-names = "mclk", "macro", "dcodec", "npl";
2684 
2685                         #clock-cells = <0>;
2686                         clock-output-names = "fsgen";
2687                         #sound-dai-cells = <1>;
2688                         status = "disabled";
2689                 };
2690 
2691                 remoteproc_adsp: remoteproc@30000000 {
2692                         compatible = "qcom,sm8450-adsp-pas";
2693                         reg = <0 0x30000000 0 0x100>;
2694 
2695                         interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
2696                                               <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
2697                                               <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
2698                                               <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
2699                                               <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
2700                         interrupt-names = "wdog", "fatal", "ready",
2701                                           "handover", "stop-ack";
2702 
2703                         clocks = <&rpmhcc RPMH_CXO_CLK>;
2704                         clock-names = "xo";
2705 
2706                         power-domains = <&rpmhpd RPMHPD_LCX>,
2707                                         <&rpmhpd RPMHPD_LMX>;
2708                         power-domain-names = "lcx", "lmx";
2709 
2710                         memory-region = <&adsp_mem>;
2711 
2712                         qcom,qmp = <&aoss_qmp>;
2713 
2714                         qcom,smem-states = <&smp2p_adsp_out 0>;
2715                         qcom,smem-state-names = "stop";
2716 
2717                         status = "disabled";
2718 
2719                         remoteproc_adsp_glink: glink-edge {
2720                                 interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
2721                                                              IPCC_MPROC_SIGNAL_GLINK_QMP
2722                                                              IRQ_TYPE_EDGE_RISING>;
2723                                 mboxes = <&ipcc IPCC_CLIENT_LPASS
2724                                                 IPCC_MPROC_SIGNAL_GLINK_QMP>;
2725 
2726                                 label = "lpass";
2727                                 qcom,remote-pid = <2>;
2728 
2729                                 gpr {
2730                                         compatible = "qcom,gpr";
2731                                         qcom,glink-channels = "adsp_apps";
2732                                         qcom,domain = <GPR_DOMAIN_ID_ADSP>;
2733                                         qcom,intents = <512 20>;
2734                                         #address-cells = <1>;
2735                                         #size-cells = <0>;
2736 
2737                                         q6apm: service@1 {
2738                                                 compatible = "qcom,q6apm";
2739                                                 reg = <GPR_APM_MODULE_IID>;
2740                                                 #sound-dai-cells = <0>;
2741                                                 qcom,protection-domain = "avs/audio",
2742                                                                          "msm/adsp/audio_pd";
2743 
2744                                                 q6apmdai: dais {
2745                                                         compatible = "qcom,q6apm-dais";
2746                                                         iommus = <&apps_smmu 0x1801 0x0>;
2747                                                 };
2748 
2749                                                 q6apmbedai: bedais {
2750                                                         compatible = "qcom,q6apm-lpass-dais";
2751                                                         #sound-dai-cells = <1>;
2752                                                 };
2753                                         };
2754 
2755                                         q6prm: service@2 {
2756                                                 compatible = "qcom,q6prm";
2757                                                 reg = <GPR_PRM_MODULE_IID>;
2758                                                 qcom,protection-domain = "avs/audio",
2759                                                                          "msm/adsp/audio_pd";
2760 
2761                                                 q6prmcc: clock-controller {
2762                                                         compatible = "qcom,q6prm-lpass-clocks";
2763                                                         #clock-cells = <2>;
2764                                                 };
2765                                         };
2766                                 };
2767 
2768                                 fastrpc {
2769                                         compatible = "qcom,fastrpc";
2770                                         qcom,glink-channels = "fastrpcglink-apps-dsp";
2771                                         label = "adsp";
2772                                         qcom,non-secure-domain;
2773                                         #address-cells = <1>;
2774                                         #size-cells = <0>;
2775 
2776                                         compute-cb@3 {
2777                                                 compatible = "qcom,fastrpc-compute-cb";
2778                                                 reg = <3>;
2779                                                 iommus = <&apps_smmu 0x1803 0x0>;
2780                                         };
2781 
2782                                         compute-cb@4 {
2783                                                 compatible = "qcom,fastrpc-compute-cb";
2784                                                 reg = <4>;
2785                                                 iommus = <&apps_smmu 0x1804 0x0>;
2786                                         };
2787 
2788                                         compute-cb@5 {
2789                                                 compatible = "qcom,fastrpc-compute-cb";
2790                                                 reg = <5>;
2791                                                 iommus = <&apps_smmu 0x1805 0x0>;
2792                                         };
2793                                 };
2794                         };
2795                 };
2796 
2797                 remoteproc_cdsp: remoteproc@32300000 {
2798                         compatible = "qcom,sm8450-cdsp-pas";
2799                         reg = <0 0x32300000 0 0x1400000>;
2800 
2801                         interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
2802                                               <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
2803                                               <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
2804                                               <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
2805                                               <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
2806                         interrupt-names = "wdog", "fatal", "ready",
2807                                           "handover", "stop-ack";
2808 
2809                         clocks = <&rpmhcc RPMH_CXO_CLK>;
2810                         clock-names = "xo";
2811 
2812                         power-domains = <&rpmhpd RPMHPD_CX>,
2813                                         <&rpmhpd RPMHPD_MXC>;
2814                         power-domain-names = "cx", "mxc";
2815 
2816                         memory-region = <&cdsp_mem>;
2817 
2818                         qcom,qmp = <&aoss_qmp>;
2819 
2820                         qcom,smem-states = <&smp2p_cdsp_out 0>;
2821                         qcom,smem-state-names = "stop";
2822 
2823                         status = "disabled";
2824 
2825                         glink-edge {
2826                                 interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
2827                                                              IPCC_MPROC_SIGNAL_GLINK_QMP
2828                                                              IRQ_TYPE_EDGE_RISING>;
2829                                 mboxes = <&ipcc IPCC_CLIENT_CDSP
2830                                                 IPCC_MPROC_SIGNAL_GLINK_QMP>;
2831 
2832                                 label = "cdsp";
2833                                 qcom,remote-pid = <5>;
2834 
2835                                 fastrpc {
2836                                         compatible = "qcom,fastrpc";
2837                                         qcom,glink-channels = "fastrpcglink-apps-dsp";
2838                                         label = "cdsp";
2839                                         qcom,non-secure-domain;
2840                                         #address-cells = <1>;
2841                                         #size-cells = <0>;
2842 
2843                                         compute-cb@1 {
2844                                                 compatible = "qcom,fastrpc-compute-cb";
2845                                                 reg = <1>;
2846                                                 iommus = <&apps_smmu 0x2161 0x0400>,
2847                                                          <&apps_smmu 0x1021 0x1420>;
2848                                         };
2849 
2850                                         compute-cb@2 {
2851                                                 compatible = "qcom,fastrpc-compute-cb";
2852                                                 reg = <2>;
2853                                                 iommus = <&apps_smmu 0x2162 0x0400>,
2854                                                          <&apps_smmu 0x1022 0x1420>;
2855                                         };
2856 
2857                                         compute-cb@3 {
2858                                                 compatible = "qcom,fastrpc-compute-cb";
2859                                                 reg = <3>;
2860                                                 iommus = <&apps_smmu 0x2163 0x0400>,
2861                                                          <&apps_smmu 0x1023 0x1420>;
2862                                         };
2863 
2864                                         compute-cb@4 {
2865                                                 compatible = "qcom,fastrpc-compute-cb";
2866                                                 reg = <4>;
2867                                                 iommus = <&apps_smmu 0x2164 0x0400>,
2868                                                          <&apps_smmu 0x1024 0x1420>;
2869                                         };
2870 
2871                                         compute-cb@5 {
2872                                                 compatible = "qcom,fastrpc-compute-cb";
2873                                                 reg = <5>;
2874                                                 iommus = <&apps_smmu 0x2165 0x0400>,
2875                                                          <&apps_smmu 0x1025 0x1420>;
2876                                         };
2877 
2878                                         compute-cb@6 {
2879                                                 compatible = "qcom,fastrpc-compute-cb";
2880                                                 reg = <6>;
2881                                                 iommus = <&apps_smmu 0x2166 0x0400>,
2882                                                          <&apps_smmu 0x1026 0x1420>;
2883                                         };
2884 
2885                                         compute-cb@7 {
2886                                                 compatible = "qcom,fastrpc-compute-cb";
2887                                                 reg = <7>;
2888                                                 iommus = <&apps_smmu 0x2167 0x0400>,
2889                                                          <&apps_smmu 0x1027 0x1420>;
2890                                         };
2891 
2892                                         compute-cb@8 {
2893                                                 compatible = "qcom,fastrpc-compute-cb";
2894                                                 reg = <8>;
2895                                                 iommus = <&apps_smmu 0x2168 0x0400>,
2896                                                          <&apps_smmu 0x1028 0x1420>;
2897                                         };
2898 
2899                                         /* note: secure cb9 in downstream */
2900                                 };
2901                         };
2902                 };
2903 
2904                 remoteproc_mpss: remoteproc@4080000 {
2905                         compatible = "qcom,sm8450-mpss-pas";
2906                         reg = <0x0 0x04080000 0x0 0x4040>;
2907 
2908                         interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
2909                                               <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
2910                                               <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
2911                                               <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
2912                                               <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
2913                                               <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
2914                         interrupt-names = "wdog", "fatal", "ready", "handover",
2915                                           "stop-ack", "shutdown-ack";
2916 
2917                         clocks = <&rpmhcc RPMH_CXO_CLK>;
2918                         clock-names = "xo";
2919 
2920                         power-domains = <&rpmhpd RPMHPD_CX>,
2921                                         <&rpmhpd RPMHPD_MSS>;
2922                         power-domain-names = "cx", "mss";
2923 
2924                         memory-region = <&mpss_mem>;
2925 
2926                         qcom,qmp = <&aoss_qmp>;
2927 
2928                         qcom,smem-states = <&smp2p_modem_out 0>;
2929                         qcom,smem-state-names = "stop";
2930 
2931                         status = "disabled";
2932 
2933                         glink-edge {
2934                                 interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
2935                                                              IPCC_MPROC_SIGNAL_GLINK_QMP
2936                                                              IRQ_TYPE_EDGE_RISING>;
2937                                 mboxes = <&ipcc IPCC_CLIENT_MPSS
2938                                                 IPCC_MPROC_SIGNAL_GLINK_QMP>;
2939                                 label = "modem";
2940                                 qcom,remote-pid = <1>;
2941                         };
2942                 };
2943 
2944                 videocc: clock-controller@aaf0000 {
2945                         compatible = "qcom,sm8450-videocc";
2946                         reg = <0 0x0aaf0000 0 0x10000>;
2947                         clocks = <&rpmhcc RPMH_CXO_CLK>,
2948                                  <&gcc GCC_VIDEO_AHB_CLK>;
2949                         power-domains = <&rpmhpd RPMHPD_MMCX>;
2950                         required-opps = <&rpmhpd_opp_low_svs>;
2951                         #clock-cells = <1>;
2952                         #reset-cells = <1>;
2953                         #power-domain-cells = <1>;
2954                 };
2955 
2956                 cci0: cci@ac15000 {
2957                         compatible = "qcom,sm8450-cci", "qcom,msm8996-cci";
2958                         reg = <0 0x0ac15000 0 0x1000>;
2959                         interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
2960                         power-domains = <&camcc TITAN_TOP_GDSC>;
2961 
2962                         clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
2963                                  <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
2964                                  <&camcc CAM_CC_CPAS_AHB_CLK>,
2965                                  <&camcc CAM_CC_CCI_0_CLK>,
2966                                  <&camcc CAM_CC_CCI_0_CLK_SRC>;
2967                         clock-names = "camnoc_axi",
2968                                       "slow_ahb_src",
2969                                       "cpas_ahb",
2970                                       "cci",
2971                                       "cci_src";
2972                         pinctrl-0 = <&cci0_default &cci1_default>;
2973                         pinctrl-1 = <&cci0_sleep &cci1_sleep>;
2974                         pinctrl-names = "default", "sleep";
2975 
2976                         status = "disabled";
2977                         #address-cells = <1>;
2978                         #size-cells = <0>;
2979 
2980                         cci0_i2c0: i2c-bus@0 {
2981                                 reg = <0>;
2982                                 clock-frequency = <1000000>;
2983                                 #address-cells = <1>;
2984                                 #size-cells = <0>;
2985                         };
2986 
2987                         cci0_i2c1: i2c-bus@1 {
2988                                 reg = <1>;
2989                                 clock-frequency = <1000000>;
2990                                 #address-cells = <1>;
2991                                 #size-cells = <0>;
2992                         };
2993                 };
2994 
2995                 cci1: cci@ac16000 {
2996                         compatible = "qcom,sm8450-cci", "qcom,msm8996-cci";
2997                         reg = <0 0x0ac16000 0 0x1000>;
2998                         interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
2999                         power-domains = <&camcc TITAN_TOP_GDSC>;
3000 
3001                         clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
3002                                  <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
3003                                  <&camcc CAM_CC_CPAS_AHB_CLK>,
3004                                  <&camcc CAM_CC_CCI_1_CLK>,
3005                                  <&camcc CAM_CC_CCI_1_CLK_SRC>;
3006                         clock-names = "camnoc_axi",
3007                                       "slow_ahb_src",
3008                                       "cpas_ahb",
3009                                       "cci",
3010                                       "cci_src";
3011                         pinctrl-0 = <&cci2_default &cci3_default>;
3012                         pinctrl-1 = <&cci2_sleep &cci3_sleep>;
3013                         pinctrl-names = "default", "sleep";
3014 
3015                         status = "disabled";
3016                         #address-cells = <1>;
3017                         #size-cells = <0>;
3018 
3019                         cci1_i2c0: i2c-bus@0 {
3020                                 reg = <0>;
3021                                 clock-frequency = <1000000>;
3022                                 #address-cells = <1>;
3023                                 #size-cells = <0>;
3024                         };
3025 
3026                         cci1_i2c1: i2c-bus@1 {
3027                                 reg = <1>;
3028                                 clock-frequency = <1000000>;
3029                                 #address-cells = <1>;
3030                                 #size-cells = <0>;
3031                         };
3032                 };
3033 
3034                 camcc: clock-controller@ade0000 {
3035                         compatible = "qcom,sm8450-camcc";
3036                         reg = <0 0x0ade0000 0 0x20000>;
3037                         clocks = <&gcc GCC_CAMERA_AHB_CLK>,
3038                                  <&rpmhcc RPMH_CXO_CLK>,
3039                                  <&rpmhcc RPMH_CXO_CLK_A>,
3040                                  <&sleep_clk>;
3041                         power-domains = <&rpmhpd RPMHPD_MMCX>;
3042                         required-opps = <&rpmhpd_opp_low_svs>;
3043                         #clock-cells = <1>;
3044                         #reset-cells = <1>;
3045                         #power-domain-cells = <1>;
3046                         status = "disabled";
3047                 };
3048 
3049                 mdss: display-subsystem@ae00000 {
3050                         compatible = "qcom,sm8450-mdss";
3051                         reg = <0 0x0ae00000 0 0x1000>;
3052                         reg-names = "mdss";
3053 
3054                         /* same path used twice */
3055                         interconnects = <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>,
3056                                         <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>,
3057                                         <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
3058                                          &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
3059                         interconnect-names = "mdp0-mem",
3060                                              "mdp1-mem",
3061                                              "cpu-cfg";
3062 
3063                         resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
3064 
3065                         power-domains = <&dispcc MDSS_GDSC>;
3066 
3067                         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3068                                  <&gcc GCC_DISP_HF_AXI_CLK>,
3069                                  <&gcc GCC_DISP_SF_AXI_CLK>,
3070                                  <&dispcc DISP_CC_MDSS_MDP_CLK>;
3071 
3072                         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
3073                         interrupt-controller;
3074                         #interrupt-cells = <1>;
3075 
3076                         iommus = <&apps_smmu 0x2800 0x402>;
3077 
3078                         #address-cells = <2>;
3079                         #size-cells = <2>;
3080                         ranges;
3081 
3082                         status = "disabled";
3083 
3084                         mdss_mdp: display-controller@ae01000 {
3085                                 compatible = "qcom,sm8450-dpu";
3086                                 reg = <0 0x0ae01000 0 0x8f000>,
3087                                       <0 0x0aeb0000 0 0x2008>;
3088                                 reg-names = "mdp", "vbif";
3089 
3090                                 clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
3091                                         <&gcc GCC_DISP_SF_AXI_CLK>,
3092                                         <&dispcc DISP_CC_MDSS_AHB_CLK>,
3093                                         <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
3094                                         <&dispcc DISP_CC_MDSS_MDP_CLK>,
3095                                         <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
3096                                 clock-names = "bus",
3097                                               "nrt_bus",
3098                                               "iface",
3099                                               "lut",
3100                                               "core",
3101                                               "vsync";
3102 
3103                                 assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
3104                                 assigned-clock-rates = <19200000>;
3105 
3106                                 operating-points-v2 = <&mdp_opp_table>;
3107                                 power-domains = <&rpmhpd RPMHPD_MMCX>;
3108 
3109                                 interrupt-parent = <&mdss>;
3110                                 interrupts = <0>;
3111 
3112                                 ports {
3113                                         #address-cells = <1>;
3114                                         #size-cells = <0>;
3115 
3116                                         port@0 {
3117                                                 reg = <0>;
3118                                                 dpu_intf1_out: endpoint {
3119                                                         remote-endpoint = <&mdss_dsi0_in>;
3120                                                 };
3121                                         };
3122 
3123                                         port@1 {
3124                                                 reg = <1>;
3125                                                 dpu_intf2_out: endpoint {
3126                                                         remote-endpoint = <&mdss_dsi1_in>;
3127                                                 };
3128                                         };
3129 
3130                                         port@2 {
3131                                                 reg = <2>;
3132                                                 dpu_intf0_out: endpoint {
3133                                                         remote-endpoint = <&mdss_dp0_in>;
3134                                                 };
3135                                         };
3136                                 };
3137 
3138                                 mdp_opp_table: opp-table {
3139                                         compatible = "operating-points-v2";
3140 
3141                                         opp-172000000 {
3142                                                 opp-hz = /bits/ 64 <172000000>;
3143                                                 required-opps = <&rpmhpd_opp_low_svs_d1>;
3144                                         };
3145 
3146                                         opp-200000000 {
3147                                                 opp-hz = /bits/ 64 <200000000>;
3148                                                 required-opps = <&rpmhpd_opp_low_svs>;
3149                                         };
3150 
3151                                         opp-325000000 {
3152                                                 opp-hz = /bits/ 64 <325000000>;
3153                                                 required-opps = <&rpmhpd_opp_svs>;
3154                                         };
3155 
3156                                         opp-375000000 {
3157                                                 opp-hz = /bits/ 64 <375000000>;
3158                                                 required-opps = <&rpmhpd_opp_svs_l1>;
3159                                         };
3160 
3161                                         opp-500000000 {
3162                                                 opp-hz = /bits/ 64 <500000000>;
3163                                                 required-opps = <&rpmhpd_opp_nom>;
3164                                         };
3165                                 };
3166                         };
3167 
3168                         mdss_dp0: displayport-controller@ae90000 {
3169                                 compatible = "qcom,sm8450-dp", "qcom,sm8350-dp";
3170                                 reg = <0 0xae90000 0 0x200>,
3171                                       <0 0xae90200 0 0x200>,
3172                                       <0 0xae90400 0 0xc00>,
3173                                       <0 0xae91000 0 0x400>,
3174                                       <0 0xae91400 0 0x400>;
3175                                 interrupt-parent = <&mdss>;
3176                                 interrupts = <12>;
3177                                 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3178                                          <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
3179                                          <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
3180                                          <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
3181                                          <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
3182                                 clock-names = "core_iface",
3183                                               "core_aux",
3184                                               "ctrl_link",
3185                                               "ctrl_link_iface",
3186                                               "stream_pixel";
3187 
3188                                 assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
3189                                                   <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
3190                                 assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
3191                                                          <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
3192 
3193                                 phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
3194                                 phy-names = "dp";
3195 
3196                                 #sound-dai-cells = <0>;
3197 
3198                                 operating-points-v2 = <&dp_opp_table>;
3199                                 power-domains = <&rpmhpd RPMHPD_MMCX>;
3200 
3201                                 status = "disabled";
3202 
3203                                 ports {
3204                                         #address-cells = <1>;
3205                                         #size-cells = <0>;
3206 
3207                                         port@0 {
3208                                                 reg = <0>;
3209                                                 mdss_dp0_in: endpoint {
3210                                                         remote-endpoint = <&dpu_intf0_out>;
3211                                                 };
3212                                         };
3213 
3214                                         port@1 {
3215                                                 reg = <1>;
3216 
3217                                                 mdss_dp0_out: endpoint {
3218                                                         remote-endpoint = <&usb_1_qmpphy_dp_in>;
3219                                                 };
3220                 };
3221                                 };
3222 
3223                                 dp_opp_table: opp-table {
3224                                         compatible = "operating-points-v2";
3225 
3226                                         opp-160000000 {
3227                                                 opp-hz = /bits/ 64 <160000000>;
3228                                                 required-opps = <&rpmhpd_opp_low_svs>;
3229                                         };
3230 
3231                                         opp-270000000 {
3232                                                 opp-hz = /bits/ 64 <270000000>;
3233                                                 required-opps = <&rpmhpd_opp_svs>;
3234                                         };
3235 
3236                                         opp-540000000 {
3237                                                 opp-hz = /bits/ 64 <540000000>;
3238                                                 required-opps = <&rpmhpd_opp_svs_l1>;
3239                                         };
3240 
3241                                         opp-810000000 {
3242                                                 opp-hz = /bits/ 64 <810000000>;
3243                                                 required-opps = <&rpmhpd_opp_nom>;
3244                                         };
3245                                 };
3246                         };
3247 
3248                         mdss_dsi0: dsi@ae94000 {
3249                                 compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl";
3250                                 reg = <0 0x0ae94000 0 0x400>;
3251                                 reg-names = "dsi_ctrl";
3252 
3253                                 interrupt-parent = <&mdss>;
3254                                 interrupts = <4>;
3255 
3256                                 clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
3257                                          <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
3258                                          <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
3259                                          <&dispcc DISP_CC_MDSS_ESC0_CLK>,
3260                                          <&dispcc DISP_CC_MDSS_AHB_CLK>,
3261                                         <&gcc GCC_DISP_HF_AXI_CLK>;
3262                                 clock-names = "byte",
3263                                               "byte_intf",
3264                                               "pixel",
3265                                               "core",
3266                                               "iface",
3267                                               "bus";
3268 
3269                                 assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
3270                                 assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
3271 
3272                                 operating-points-v2 = <&mdss_dsi_opp_table>;
3273                                 power-domains = <&rpmhpd RPMHPD_MMCX>;
3274 
3275                                 phys = <&mdss_dsi0_phy>;
3276                                 phy-names = "dsi";
3277 
3278                                 #address-cells = <1>;
3279                                 #size-cells = <0>;
3280 
3281                                 status = "disabled";
3282 
3283                                 ports {
3284                                         #address-cells = <1>;
3285                                         #size-cells = <0>;
3286 
3287                                         port@0 {
3288                                                 reg = <0>;
3289                                                 mdss_dsi0_in: endpoint {
3290                                                         remote-endpoint = <&dpu_intf1_out>;
3291                                                 };
3292                                         };
3293 
3294                                         port@1 {
3295                                                 reg = <1>;
3296                                                 mdss_dsi0_out: endpoint {
3297                                                 };
3298                                         };
3299                                 };
3300 
3301                                 mdss_dsi_opp_table: opp-table {
3302                                         compatible = "operating-points-v2";
3303 
3304                                         opp-187500000 {
3305                                                 opp-hz = /bits/ 64 <187500000>;
3306                                                 required-opps = <&rpmhpd_opp_low_svs>;
3307                                         };
3308 
3309                                         opp-300000000 {
3310                                                 opp-hz = /bits/ 64 <300000000>;
3311                                                 required-opps = <&rpmhpd_opp_svs>;
3312                                         };
3313 
3314                                         opp-358000000 {
3315                                                 opp-hz = /bits/ 64 <358000000>;
3316                                                 required-opps = <&rpmhpd_opp_svs_l1>;
3317                                         };
3318                                 };
3319                         };
3320 
3321                         mdss_dsi0_phy: phy@ae94400 {
3322                                 compatible = "qcom,sm8450-dsi-phy-5nm";
3323                                 reg = <0 0x0ae94400 0 0x200>,
3324                                       <0 0x0ae94600 0 0x280>,
3325                                       <0 0x0ae94900 0 0x260>;
3326                                 reg-names = "dsi_phy",
3327                                             "dsi_phy_lane",
3328                                             "dsi_pll";
3329 
3330                                 #clock-cells = <1>;
3331                                 #phy-cells = <0>;
3332 
3333                                 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3334                                          <&rpmhcc RPMH_CXO_CLK>;
3335                                 clock-names = "iface", "ref";
3336 
3337                                 status = "disabled";
3338                         };
3339 
3340                         mdss_dsi1: dsi@ae96000 {
3341                                 compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl";
3342                                 reg = <0 0x0ae96000 0 0x400>;
3343                                 reg-names = "dsi_ctrl";
3344 
3345                                 interrupt-parent = <&mdss>;
3346                                 interrupts = <5>;
3347 
3348                                 clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
3349                                          <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
3350                                          <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
3351                                          <&dispcc DISP_CC_MDSS_ESC1_CLK>,
3352                                          <&dispcc DISP_CC_MDSS_AHB_CLK>,
3353                                          <&gcc GCC_DISP_HF_AXI_CLK>;
3354                                 clock-names = "byte",
3355                                               "byte_intf",
3356                                               "pixel",
3357                                               "core",
3358                                               "iface",
3359                                               "bus";
3360 
3361                                 assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
3362                                 assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
3363 
3364                                 operating-points-v2 = <&mdss_dsi_opp_table>;
3365                                 power-domains = <&rpmhpd RPMHPD_MMCX>;
3366 
3367                                 phys = <&mdss_dsi1_phy>;
3368                                 phy-names = "dsi";
3369 
3370                                 #address-cells = <1>;
3371                                 #size-cells = <0>;
3372 
3373                                 status = "disabled";
3374 
3375                                 ports {
3376                                         #address-cells = <1>;
3377                                         #size-cells = <0>;
3378 
3379                                         port@0 {
3380                                                 reg = <0>;
3381                                                 mdss_dsi1_in: endpoint {
3382                                                         remote-endpoint = <&dpu_intf2_out>;
3383                                                 };
3384                                         };
3385 
3386                                         port@1 {
3387                                                 reg = <1>;
3388                                                 mdss_dsi1_out: endpoint {
3389                                                 };
3390                                         };
3391                                 };
3392                         };
3393 
3394                         mdss_dsi1_phy: phy@ae96400 {
3395                                 compatible = "qcom,sm8450-dsi-phy-5nm";
3396                                 reg = <0 0x0ae96400 0 0x200>,
3397                                       <0 0x0ae96600 0 0x280>,
3398                                       <0 0x0ae96900 0 0x260>;
3399                                 reg-names = "dsi_phy",
3400                                             "dsi_phy_lane",
3401                                             "dsi_pll";
3402 
3403                                 #clock-cells = <1>;
3404                                 #phy-cells = <0>;
3405 
3406                                 clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
3407                                          <&rpmhcc RPMH_CXO_CLK>;
3408                                 clock-names = "iface", "ref";
3409 
3410                                 status = "disabled";
3411                         };
3412                 };
3413 
3414                 dispcc: clock-controller@af00000 {
3415                         compatible = "qcom,sm8450-dispcc";
3416                         reg = <0 0x0af00000 0 0x20000>;
3417                         clocks = <&rpmhcc RPMH_CXO_CLK>,
3418                                  <&rpmhcc RPMH_CXO_CLK_A>,
3419                                  <&gcc GCC_DISP_AHB_CLK>,
3420                                  <&sleep_clk>,
3421                                  <&mdss_dsi0_phy 0>,
3422                                  <&mdss_dsi0_phy 1>,
3423                                  <&mdss_dsi1_phy 0>,
3424                                  <&mdss_dsi1_phy 1>,
3425                                  <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
3426                                  <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
3427                                  <0>, /* dp1 */
3428                                  <0>,
3429                                  <0>, /* dp2 */
3430                                  <0>,
3431                                  <0>, /* dp3 */
3432                                  <0>;
3433                         power-domains = <&rpmhpd RPMHPD_MMCX>;
3434                         required-opps = <&rpmhpd_opp_low_svs>;
3435                         #clock-cells = <1>;
3436                         #reset-cells = <1>;
3437                         #power-domain-cells = <1>;
3438                         status = "disabled";
3439                 };
3440 
3441                 pdc: interrupt-controller@b220000 {
3442                         compatible = "qcom,sm8450-pdc", "qcom,pdc";
3443                         reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
3444                         qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
3445                                           <94 609 31>, <125 63 1>, <126 716 12>;
3446                         #interrupt-cells = <2>;
3447                         interrupt-parent = <&intc>;
3448                         interrupt-controller;
3449                 };
3450 
3451                 tsens0: thermal-sensor@c263000 {
3452                         compatible = "qcom,sm8450-tsens", "qcom,tsens-v2";
3453                         reg = <0 0x0c263000 0 0x1000>, /* TM */
3454                               <0 0x0c222000 0 0x1000>; /* SROT */
3455                         #qcom,sensors = <16>;
3456                         interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
3457                                      <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
3458                         interrupt-names = "uplow", "critical";
3459                         #thermal-sensor-cells = <1>;
3460                 };
3461 
3462                 tsens1: thermal-sensor@c265000 {
3463                         compatible = "qcom,sm8450-tsens", "qcom,tsens-v2";
3464                         reg = <0 0x0c265000 0 0x1000>, /* TM */
3465                               <0 0x0c223000 0 0x1000>; /* SROT */
3466                         #qcom,sensors = <16>;
3467                         interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
3468                                      <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
3469                         interrupt-names = "uplow", "critical";
3470                         #thermal-sensor-cells = <1>;
3471                 };
3472 
3473                 aoss_qmp: power-management@c300000 {
3474                         compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp";
3475                         reg = <0 0x0c300000 0 0x400>;
3476                         interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
3477                                                      IRQ_TYPE_EDGE_RISING>;
3478                         mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
3479 
3480                         #clock-cells = <0>;
3481                 };
3482 
3483                 sram@c3f0000 {
3484                         compatible = "qcom,rpmh-stats";
3485                         reg = <0 0x0c3f0000 0 0x400>;
3486                 };
3487 
3488                 spmi_bus: spmi@c400000 {
3489                         compatible = "qcom,spmi-pmic-arb";
3490                         reg = <0 0x0c400000 0 0x00003000>,
3491                               <0 0x0c500000 0 0x00400000>,
3492                               <0 0x0c440000 0 0x00080000>,
3493                               <0 0x0c4c0000 0 0x00010000>,
3494                               <0 0x0c42d000 0 0x00010000>;
3495                         reg-names = "core",
3496                                     "chnls",
3497                                     "obsrvr",
3498                                     "intr",
3499                                     "cnfg";
3500                         interrupt-names = "periph_irq";
3501                         interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
3502                         qcom,ee = <0>;
3503                         qcom,channel = <0>;
3504                         interrupt-controller;
3505                         #interrupt-cells = <4>;
3506                         #address-cells = <2>;
3507                         #size-cells = <0>;
3508                 };
3509 
3510                 ipcc: mailbox@ed18000 {
3511                         compatible = "qcom,sm8450-ipcc", "qcom,ipcc";
3512                         reg = <0 0x0ed18000 0 0x1000>;
3513                         interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
3514                         interrupt-controller;
3515                         #interrupt-cells = <3>;
3516                         #mbox-cells = <2>;
3517                 };
3518 
3519                 tlmm: pinctrl@f100000 {
3520                         compatible = "qcom,sm8450-tlmm";
3521                         reg = <0 0x0f100000 0 0x300000>;
3522                         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
3523                         gpio-controller;
3524                         #gpio-cells = <2>;
3525                         interrupt-controller;
3526                         #interrupt-cells = <2>;
3527                         gpio-ranges = <&tlmm 0 0 211>;
3528                         wakeup-parent = <&pdc>;
3529 
3530                         sdc2_default_state: sdc2-default-state {
3531                                 clk-pins {
3532                                         pins = "sdc2_clk";
3533                                         drive-strength = <16>;
3534                                         bias-disable;
3535                                 };
3536 
3537                                 cmd-pins {
3538                                         pins = "sdc2_cmd";
3539                                         drive-strength = <16>;
3540                                         bias-pull-up;
3541                                 };
3542 
3543                                 data-pins {
3544                                         pins = "sdc2_data";
3545                                         drive-strength = <16>;
3546                                         bias-pull-up;
3547                                 };
3548                         };
3549 
3550                         sdc2_sleep_state: sdc2-sleep-state {
3551                                 clk-pins {
3552                                         pins = "sdc2_clk";
3553                                         drive-strength = <2>;
3554                                         bias-disable;
3555                                 };
3556 
3557                                 cmd-pins {
3558                                         pins = "sdc2_cmd";
3559                                         drive-strength = <2>;
3560                                         bias-pull-up;
3561                                 };
3562 
3563                                 data-pins {
3564                                         pins = "sdc2_data";
3565                                         drive-strength = <2>;
3566                                         bias-pull-up;
3567                                 };
3568                         };
3569 
3570                         cci0_default: cci0-default-state {
3571                                 /* SDA, SCL */
3572                                 pins = "gpio110", "gpio111";
3573                                 function = "cci_i2c";
3574                                 drive-strength = <2>;
3575                                 bias-pull-up;
3576                         };
3577 
3578                         cci0_sleep: cci0-sleep-state {
3579                                 /* SDA, SCL */
3580                                 pins = "gpio110", "gpio111";
3581                                 function = "cci_i2c";
3582                                 drive-strength = <2>;
3583                                 bias-pull-down;
3584                         };
3585 
3586                         cci1_default: cci1-default-state {
3587                                 /* SDA, SCL */
3588                                 pins = "gpio112", "gpio113";
3589                                 function = "cci_i2c";
3590                                 drive-strength = <2>;
3591                                 bias-pull-up;
3592                         };
3593 
3594                         cci1_sleep: cci1-sleep-state {
3595                                 /* SDA, SCL */
3596                                 pins = "gpio112", "gpio113";
3597                                 function = "cci_i2c";
3598                                 drive-strength = <2>;
3599                                 bias-pull-down;
3600                         };
3601 
3602                         cci2_default: cci2-default-state {
3603                                 /* SDA, SCL */
3604                                 pins = "gpio114", "gpio115";
3605                                 function = "cci_i2c";
3606                                 drive-strength = <2>;
3607                                 bias-pull-up;
3608                         };
3609 
3610                         cci2_sleep: cci2-sleep-state {
3611                                 /* SDA, SCL */
3612                                 pins = "gpio114", "gpio115";
3613                                 function = "cci_i2c";
3614                                 drive-strength = <2>;
3615                                 bias-pull-down;
3616                         };
3617 
3618                         cci3_default: cci3-default-state {
3619                                 /* SDA, SCL */
3620                                 pins = "gpio208", "gpio209";
3621                                 function = "cci_i2c";
3622                                 drive-strength = <2>;
3623                                 bias-pull-up;
3624                         };
3625 
3626                         cci3_sleep: cci3-sleep-state {
3627                                 /* SDA, SCL */
3628                                 pins = "gpio208", "gpio209";
3629                                 function = "cci_i2c";
3630                                 drive-strength = <2>;
3631                                 bias-pull-down;
3632                         };
3633 
3634                         pcie0_default_state: pcie0-default-state {
3635                                 perst-pins {
3636                                         pins = "gpio94";
3637                                         function = "gpio";
3638                                         drive-strength = <2>;
3639                                         bias-pull-down;
3640                                 };
3641 
3642                                 clkreq-pins {
3643                                         pins = "gpio95";
3644                                         function = "pcie0_clkreqn";
3645                                         drive-strength = <2>;
3646                                         bias-pull-up;
3647                                 };
3648 
3649                                 wake-pins {
3650                                         pins = "gpio96";
3651                                         function = "gpio";
3652                                         drive-strength = <2>;
3653                                         bias-pull-up;
3654                                 };
3655                         };
3656 
3657                         pcie1_default_state: pcie1-default-state {
3658                                 perst-pins {
3659                                         pins = "gpio97";
3660                                         function = "gpio";
3661                                         drive-strength = <2>;
3662                                         bias-pull-down;
3663                                 };
3664 
3665                                 clkreq-pins {
3666                                         pins = "gpio98";
3667                                         function = "pcie1_clkreqn";
3668                                         drive-strength = <2>;
3669                                         bias-pull-up;
3670                                 };
3671 
3672                                 wake-pins {
3673                                         pins = "gpio99";
3674                                         function = "gpio";
3675                                         drive-strength = <2>;
3676                                         bias-pull-up;
3677                                 };
3678                         };
3679 
3680                         qup_i2c0_data_clk: qup-i2c0-data-clk-state {
3681                                 pins = "gpio0", "gpio1";
3682                                 function = "qup0";
3683                         };
3684 
3685                         qup_i2c1_data_clk: qup-i2c1-data-clk-state {
3686                                 pins = "gpio4", "gpio5";
3687                                 function = "qup1";
3688                         };
3689 
3690                         qup_i2c2_data_clk: qup-i2c2-data-clk-state {
3691                                 pins = "gpio8", "gpio9";
3692                                 function = "qup2";
3693                         };
3694 
3695                         qup_i2c3_data_clk: qup-i2c3-data-clk-state {
3696                                 pins = "gpio12", "gpio13";
3697                                 function = "qup3";
3698                         };
3699 
3700                         qup_i2c4_data_clk: qup-i2c4-data-clk-state {
3701                                 pins = "gpio16", "gpio17";
3702                                 function = "qup4";
3703                         };
3704 
3705                         qup_i2c5_data_clk: qup-i2c5-data-clk-state {
3706                                 pins = "gpio206", "gpio207";
3707                                 function = "qup5";
3708                         };
3709 
3710                         qup_i2c6_data_clk: qup-i2c6-data-clk-state {
3711                                 pins = "gpio20", "gpio21";
3712                                 function = "qup6";
3713                         };
3714 
3715                         qup_i2c8_data_clk: qup-i2c8-data-clk-state {
3716                                 pins = "gpio28", "gpio29";
3717                                 function = "qup8";
3718                         };
3719 
3720                         qup_i2c9_data_clk: qup-i2c9-data-clk-state {
3721                                 pins = "gpio32", "gpio33";
3722                                 function = "qup9";
3723                         };
3724 
3725                         qup_i2c10_data_clk: qup-i2c10-data-clk-state {
3726                                 pins = "gpio36", "gpio37";
3727                                 function = "qup10";
3728                         };
3729 
3730                         qup_i2c11_data_clk: qup-i2c11-data-clk-state {
3731                                 pins = "gpio40", "gpio41";
3732                                 function = "qup11";
3733                         };
3734 
3735                         qup_i2c12_data_clk: qup-i2c12-data-clk-state {
3736                                 pins = "gpio44", "gpio45";
3737                                 function = "qup12";
3738                         };
3739 
3740                         qup_i2c13_data_clk: qup-i2c13-data-clk-state {
3741                                 pins = "gpio48", "gpio49";
3742                                 function = "qup13";
3743                                 drive-strength = <2>;
3744                                 bias-pull-up;
3745                         };
3746 
3747                         qup_i2c14_data_clk: qup-i2c14-data-clk-state {
3748                                 pins = "gpio52", "gpio53";
3749                                 function = "qup14";
3750                                 drive-strength = <2>;
3751                                 bias-pull-up;
3752                         };
3753 
3754                         qup_i2c15_data_clk: qup-i2c15-data-clk-state {
3755                                 pins = "gpio56", "gpio57";
3756                                 function = "qup15";
3757                         };
3758 
3759                         qup_i2c16_data_clk: qup-i2c16-data-clk-state {
3760                                 pins = "gpio60", "gpio61";
3761                                 function = "qup16";
3762                         };
3763 
3764                         qup_i2c17_data_clk: qup-i2c17-data-clk-state {
3765                                 pins = "gpio64", "gpio65";
3766                                 function = "qup17";
3767                         };
3768 
3769                         qup_i2c18_data_clk: qup-i2c18-data-clk-state {
3770                                 pins = "gpio68", "gpio69";
3771                                 function = "qup18";
3772                         };
3773 
3774                         qup_i2c19_data_clk: qup-i2c19-data-clk-state {
3775                                 pins = "gpio72", "gpio73";
3776                                 function = "qup19";
3777                         };
3778 
3779                         qup_i2c20_data_clk: qup-i2c20-data-clk-state {
3780                                 pins = "gpio76", "gpio77";
3781                                 function = "qup20";
3782                         };
3783 
3784                         qup_i2c21_data_clk: qup-i2c21-data-clk-state {
3785                                 pins = "gpio80", "gpio81";
3786                                 function = "qup21";
3787                         };
3788 
3789                         qup_spi0_cs: qup-spi0-cs-state {
3790                                 pins = "gpio3";
3791                                 function = "qup0";
3792                         };
3793 
3794                         qup_spi0_data_clk: qup-spi0-data-clk-state {
3795                                 pins = "gpio0", "gpio1", "gpio2";
3796                                 function = "qup0";
3797                         };
3798 
3799                         qup_spi1_cs: qup-spi1-cs-state {
3800                                 pins = "gpio7";
3801                                 function = "qup1";
3802                         };
3803 
3804                         qup_spi1_data_clk: qup-spi1-data-clk-state {
3805                                 pins = "gpio4", "gpio5", "gpio6";
3806                                 function = "qup1";
3807                         };
3808 
3809                         qup_spi2_cs: qup-spi2-cs-state {
3810                                 pins = "gpio11";
3811                                 function = "qup2";
3812                         };
3813 
3814                         qup_spi2_data_clk: qup-spi2-data-clk-state {
3815                                 pins = "gpio8", "gpio9", "gpio10";
3816                                 function = "qup2";
3817                         };
3818 
3819                         qup_spi3_cs: qup-spi3-cs-state {
3820                                 pins = "gpio15";
3821                                 function = "qup3";
3822                         };
3823 
3824                         qup_spi3_data_clk: qup-spi3-data-clk-state {
3825                                 pins = "gpio12", "gpio13", "gpio14";
3826                                 function = "qup3";
3827                         };
3828 
3829                         qup_spi4_cs: qup-spi4-cs-state {
3830                                 pins = "gpio19";
3831                                 function = "qup4";
3832                                 drive-strength = <6>;
3833                                 bias-disable;
3834                         };
3835 
3836                         qup_spi4_data_clk: qup-spi4-data-clk-state {
3837                                 pins = "gpio16", "gpio17", "gpio18";
3838                                 function = "qup4";
3839                         };
3840 
3841                         qup_spi5_cs: qup-spi5-cs-state {
3842                                 pins = "gpio85";
3843                                 function = "qup5";
3844                         };
3845 
3846                         qup_spi5_data_clk: qup-spi5-data-clk-state {
3847                                 pins = "gpio206", "gpio207", "gpio84";
3848                                 function = "qup5";
3849                         };
3850 
3851                         qup_spi6_cs: qup-spi6-cs-state {
3852                                 pins = "gpio23";
3853                                 function = "qup6";
3854                         };
3855 
3856                         qup_spi6_data_clk: qup-spi6-data-clk-state {
3857                                 pins = "gpio20", "gpio21", "gpio22";
3858                                 function = "qup6";
3859                         };
3860 
3861                         qup_spi8_cs: qup-spi8-cs-state {
3862                                 pins = "gpio31";
3863                                 function = "qup8";
3864                         };
3865 
3866                         qup_spi8_data_clk: qup-spi8-data-clk-state {
3867                                 pins = "gpio28", "gpio29", "gpio30";
3868                                 function = "qup8";
3869                         };
3870 
3871                         qup_spi9_cs: qup-spi9-cs-state {
3872                                 pins = "gpio35";
3873                                 function = "qup9";
3874                         };
3875 
3876                         qup_spi9_data_clk: qup-spi9-data-clk-state {
3877                                 pins = "gpio32", "gpio33", "gpio34";
3878                                 function = "qup9";
3879                         };
3880 
3881                         qup_spi10_cs: qup-spi10-cs-state {
3882                                 pins = "gpio39";
3883                                 function = "qup10";
3884                         };
3885 
3886                         qup_spi10_data_clk: qup-spi10-data-clk-state {
3887                                 pins = "gpio36", "gpio37", "gpio38";
3888                                 function = "qup10";
3889                         };
3890 
3891                         qup_spi11_cs: qup-spi11-cs-state {
3892                                 pins = "gpio43";
3893                                 function = "qup11";
3894                         };
3895 
3896                         qup_spi11_data_clk: qup-spi11-data-clk-state {
3897                                 pins = "gpio40", "gpio41", "gpio42";
3898                                 function = "qup11";
3899                         };
3900 
3901                         qup_spi12_cs: qup-spi12-cs-state {
3902                                 pins = "gpio47";
3903                                 function = "qup12";
3904                         };
3905 
3906                         qup_spi12_data_clk: qup-spi12-data-clk-state {
3907                                 pins = "gpio44", "gpio45", "gpio46";
3908                                 function = "qup12";
3909                         };
3910 
3911                         qup_spi13_cs: qup-spi13-cs-state {
3912                                 pins = "gpio51";
3913                                 function = "qup13";
3914                         };
3915 
3916                         qup_spi13_data_clk: qup-spi13-data-clk-state {
3917                                 pins = "gpio48", "gpio49", "gpio50";
3918                                 function = "qup13";
3919                         };
3920 
3921                         qup_spi14_cs: qup-spi14-cs-state {
3922                                 pins = "gpio55";
3923                                 function = "qup14";
3924                         };
3925 
3926                         qup_spi14_data_clk: qup-spi14-data-clk-state {
3927                                 pins = "gpio52", "gpio53", "gpio54";
3928                                 function = "qup14";
3929                         };
3930 
3931                         qup_spi15_cs: qup-spi15-cs-state {
3932                                 pins = "gpio59";
3933                                 function = "qup15";
3934                         };
3935 
3936                         qup_spi15_data_clk: qup-spi15-data-clk-state {
3937                                 pins = "gpio56", "gpio57", "gpio58";
3938                                 function = "qup15";
3939                         };
3940 
3941                         qup_spi16_cs: qup-spi16-cs-state {
3942                                 pins = "gpio63";
3943                                 function = "qup16";
3944                         };
3945 
3946                         qup_spi16_data_clk: qup-spi16-data-clk-state {
3947                                 pins = "gpio60", "gpio61", "gpio62";
3948                                 function = "qup16";
3949                         };
3950 
3951                         qup_spi17_cs: qup-spi17-cs-state {
3952                                 pins = "gpio67";
3953                                 function = "qup17";
3954                         };
3955 
3956                         qup_spi17_data_clk: qup-spi17-data-clk-state {
3957                                 pins = "gpio64", "gpio65", "gpio66";
3958                                 function = "qup17";
3959                         };
3960 
3961                         qup_spi18_cs: qup-spi18-cs-state {
3962                                 pins = "gpio71";
3963                                 function = "qup18";
3964                                 drive-strength = <6>;
3965                                 bias-disable;
3966                         };
3967 
3968                         qup_spi18_data_clk: qup-spi18-data-clk-state {
3969                                 pins = "gpio68", "gpio69", "gpio70";
3970                                 function = "qup18";
3971                                 drive-strength = <6>;
3972                                 bias-disable;
3973                         };
3974 
3975                         qup_spi19_cs: qup-spi19-cs-state {
3976                                 pins = "gpio75";
3977                                 function = "qup19";
3978                                 drive-strength = <6>;
3979                                 bias-disable;
3980                         };
3981 
3982                         qup_spi19_data_clk: qup-spi19-data-clk-state {
3983                                 pins = "gpio72", "gpio73", "gpio74";
3984                                 function = "qup19";
3985                                 drive-strength = <6>;
3986                                 bias-disable;
3987                         };
3988 
3989                         qup_spi20_cs: qup-spi20-cs-state {
3990                                 pins = "gpio79";
3991                                 function = "qup20";
3992                         };
3993 
3994                         qup_spi20_data_clk: qup-spi20-data-clk-state {
3995                                 pins = "gpio76", "gpio77", "gpio78";
3996                                 function = "qup20";
3997                         };
3998 
3999                         qup_spi21_cs: qup-spi21-cs-state {
4000                                 pins = "gpio83";
4001                                 function = "qup21";
4002                         };
4003 
4004                         qup_spi21_data_clk: qup-spi21-data-clk-state {
4005                                 pins = "gpio80", "gpio81", "gpio82";
4006                                 function = "qup21";
4007                         };
4008 
4009                         qup_uart7_rx: qup-uart7-rx-state {
4010                                 pins = "gpio26";
4011                                 function = "qup7";
4012                                 drive-strength = <2>;
4013                                 bias-disable;
4014                         };
4015 
4016                         qup_uart7_tx: qup-uart7-tx-state {
4017                                 pins = "gpio27";
4018                                 function = "qup7";
4019                                 drive-strength = <2>;
4020                                 bias-disable;
4021                         };
4022 
4023                         qup_uart20_default: qup-uart20-default-state {
4024                                 pins = "gpio76", "gpio77", "gpio78", "gpio79";
4025                                 function = "qup20";
4026                         };
4027                 };
4028 
4029                 lpass_tlmm: pinctrl@3440000 {
4030                         compatible = "qcom,sm8450-lpass-lpi-pinctrl";
4031                         reg = <0 0x03440000 0x0 0x20000>,
4032                               <0 0x034d0000 0x0 0x10000>;
4033                         gpio-controller;
4034                         #gpio-cells = <2>;
4035                         gpio-ranges = <&lpass_tlmm 0 0 23>;
4036 
4037                         clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
4038                                  <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
4039                         clock-names = "core", "audio";
4040 
4041                         tx_swr_active: tx-swr-active-state {
4042                                 clk-pins {
4043                                         pins = "gpio0";
4044                                         function = "swr_tx_clk";
4045                                         drive-strength = <2>;
4046                                         slew-rate = <1>;
4047                                         bias-disable;
4048                                 };
4049 
4050                                 data-pins {
4051                                         pins = "gpio1", "gpio2", "gpio14";
4052                                         function = "swr_tx_data";
4053                                         drive-strength = <2>;
4054                                         slew-rate = <1>;
4055                                         bias-bus-hold;
4056                                 };
4057                         };
4058 
4059                         rx_swr_active: rx-swr-active-state {
4060                                 clk-pins {
4061                                         pins = "gpio3";
4062                                         function = "swr_rx_clk";
4063                                         drive-strength = <2>;
4064                                         slew-rate = <1>;
4065                                         bias-disable;
4066                                 };
4067 
4068                                 data-pins {
4069                                         pins = "gpio4", "gpio5";
4070                                         function = "swr_rx_data";
4071                                         drive-strength = <2>;
4072                                         slew-rate = <1>;
4073                                         bias-bus-hold;
4074                                 };
4075                         };
4076 
4077                         dmic01_default: dmic01-default-state {
4078                                 clk-pins {
4079                                         pins = "gpio6";
4080                                         function = "dmic1_clk";
4081                                         drive-strength = <8>;
4082                                         output-high;
4083                                 };
4084 
4085                                 data-pins {
4086                                         pins = "gpio7";
4087                                         function = "dmic1_data";
4088                                         drive-strength = <8>;
4089                                 };
4090                         };
4091 
4092                         dmic23_default: dmic23-default-state {
4093                                 clk-pins {
4094                                         pins = "gpio8";
4095                                         function = "dmic2_clk";
4096                                         drive-strength = <8>;
4097                                         output-high;
4098                                 };
4099 
4100                                 data-pins {
4101                                         pins = "gpio9";
4102                                         function = "dmic2_data";
4103                                         drive-strength = <8>;
4104                                 };
4105                         };
4106 
4107                         wsa_swr_active: wsa-swr-active-state {
4108                                 clk-pins {
4109                                         pins = "gpio10";
4110                                         function = "wsa_swr_clk";
4111                                         drive-strength = <2>;
4112                                         slew-rate = <1>;
4113                                         bias-disable;
4114                                 };
4115 
4116                                 data-pins {
4117                                         pins = "gpio11";
4118                                         function = "wsa_swr_data";
4119                                         drive-strength = <2>;
4120                                         slew-rate = <1>;
4121                                         bias-bus-hold;
4122                                 };
4123                         };
4124 
4125                         wsa2_swr_active: wsa2-swr-active-state {
4126                                 clk-pins {
4127                                         pins = "gpio15";
4128                                         function = "wsa2_swr_clk";
4129                                         drive-strength = <2>;
4130                                         slew-rate = <1>;
4131                                         bias-disable;
4132                                 };
4133 
4134                                 data-pins {
4135                                         pins = "gpio16";
4136                                         function = "wsa2_swr_data";
4137                                         drive-strength = <2>;
4138                                         slew-rate = <1>;
4139                                         bias-bus-hold;
4140                                 };
4141                         };
4142                 };
4143 
4144                 sram@146aa000 {
4145                         compatible = "qcom,sm8450-imem", "syscon", "simple-mfd";
4146                         reg = <0 0x146aa000 0 0x1000>;
4147                         ranges = <0 0 0x146aa000 0x1000>;
4148 
4149                         #address-cells = <1>;
4150                         #size-cells = <1>;
4151 
4152                         pil-reloc@94c {
4153                                 compatible = "qcom,pil-reloc-info";
4154                                 reg = <0x94c 0xc8>;
4155                         };
4156                 };
4157 
4158                 apps_smmu: iommu@15000000 {
4159                         compatible = "qcom,sm8450-smmu-500", "arm,mmu-500";
4160                         reg = <0 0x15000000 0 0x100000>;
4161                         #iommu-cells = <2>;
4162                         #global-interrupts = <1>;
4163                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
4164                                      <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
4165                                      <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
4166                                      <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
4167                                      <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
4168                                      <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
4169                                      <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
4170                                      <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
4171                                      <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
4172                                      <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
4173                                      <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
4174                                      <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
4175                                      <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
4176                                      <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
4177                                      <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
4178                                      <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
4179                                      <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
4180                                      <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
4181                                      <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
4182                                      <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
4183                                      <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
4184                                      <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
4185                                      <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
4186                                      <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
4187                                      <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
4188                                      <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
4189                                      <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
4190                                      <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
4191                                      <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
4192                                      <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
4193                                      <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
4194                                      <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
4195                                      <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
4196                                      <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
4197                                      <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
4198                                      <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
4199                                      <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
4200                                      <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
4201                                      <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
4202                                      <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
4203                                      <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
4204                                      <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
4205                                      <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
4206                                      <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
4207                                      <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
4208                                      <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
4209                                      <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
4210                                      <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
4211                                      <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
4212                                      <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
4213                                      <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
4214                                      <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
4215                                      <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
4216                                      <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
4217                                      <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
4218                                      <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
4219                                      <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
4220                                      <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
4221                                      <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
4222                                      <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
4223                                      <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
4224                                      <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
4225                                      <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
4226                                      <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
4227                                      <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
4228                                      <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
4229                                      <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
4230                                      <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
4231                                      <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
4232                                      <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
4233                                      <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
4234                                      <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
4235                                      <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
4236                                      <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
4237                                      <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
4238                                      <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
4239                                      <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
4240                                      <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
4241                                      <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
4242                                      <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
4243                                      <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
4244                                      <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
4245                                      <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
4246                                      <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
4247                                      <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
4248                                      <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
4249                                      <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
4250                                      <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
4251                                      <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
4252                                      <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
4253                                      <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
4254                                      <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
4255                                      <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
4256                                      <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
4257                                      <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
4258                                      <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
4259                                      <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
4260                 };
4261 
4262                 intc: interrupt-controller@17100000 {
4263                         compatible = "arm,gic-v3";
4264                         #interrupt-cells = <3>;
4265                         interrupt-controller;
4266                         #redistributor-regions = <1>;
4267                         redistributor-stride = <0x0 0x40000>;
4268                         reg = <0x0 0x17100000 0x0 0x10000>,     /* GICD */
4269                               <0x0 0x17180000 0x0 0x200000>;    /* GICR * 8 */
4270                         interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
4271                         #address-cells = <2>;
4272                         #size-cells = <2>;
4273                         ranges;
4274 
4275                         gic_its: msi-controller@17140000 {
4276                                 compatible = "arm,gic-v3-its";
4277                                 reg = <0x0 0x17140000 0x0 0x20000>;
4278                                 msi-controller;
4279                                 #msi-cells = <1>;
4280                         };
4281                 };
4282 
4283                 timer@17420000 {
4284                         compatible = "arm,armv7-timer-mem";
4285                         #address-cells = <1>;
4286                         #size-cells = <1>;
4287                         ranges = <0 0 0 0x20000000>;
4288                         reg = <0x0 0x17420000 0x0 0x1000>;
4289                         clock-frequency = <19200000>;
4290 
4291                         frame@17421000 {
4292                                 frame-number = <0>;
4293                                 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
4294                                              <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
4295                                 reg = <0x17421000 0x1000>,
4296                                       <0x17422000 0x1000>;
4297                         };
4298 
4299                         frame@17423000 {
4300                                 frame-number = <1>;
4301                                 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
4302                                 reg = <0x17423000 0x1000>;
4303                                 status = "disabled";
4304                         };
4305 
4306                         frame@17425000 {
4307                                 frame-number = <2>;
4308                                 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
4309                                 reg = <0x17425000 0x1000>;
4310                                 status = "disabled";
4311                         };
4312 
4313                         frame@17427000 {
4314                                 frame-number = <3>;
4315                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
4316                                 reg = <0x17427000 0x1000>;
4317                                 status = "disabled";
4318                         };
4319 
4320                         frame@17429000 {
4321                                 frame-number = <4>;
4322                                 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
4323                                 reg = <0x17429000 0x1000>;
4324                                 status = "disabled";
4325                         };
4326 
4327                         frame@1742b000 {
4328                                 frame-number = <5>;
4329                                 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
4330                                 reg = <0x1742b000 0x1000>;
4331                                 status = "disabled";
4332                         };
4333 
4334                         frame@1742d000 {
4335                                 frame-number = <6>;
4336                                 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
4337                                 reg = <0x1742d000 0x1000>;
4338                                 status = "disabled";
4339                         };
4340                 };
4341 
4342                 apps_rsc: rsc@17a00000 {
4343                         label = "apps_rsc";
4344                         compatible = "qcom,rpmh-rsc";
4345                         reg = <0x0 0x17a00000 0x0 0x10000>,
4346                               <0x0 0x17a10000 0x0 0x10000>,
4347                               <0x0 0x17a20000 0x0 0x10000>,
4348                               <0x0 0x17a30000 0x0 0x10000>;
4349                         reg-names = "drv-0", "drv-1", "drv-2", "drv-3";
4350                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
4351                                      <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
4352                                      <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
4353                         qcom,tcs-offset = <0xd00>;
4354                         qcom,drv-id = <2>;
4355                         qcom,tcs-config = <ACTIVE_TCS  3>, <SLEEP_TCS   2>,
4356                                           <WAKE_TCS    2>, <CONTROL_TCS 0>;
4357                         power-domains = <&CLUSTER_PD>;
4358 
4359                         apps_bcm_voter: bcm-voter {
4360                                 compatible = "qcom,bcm-voter";
4361                         };
4362 
4363                         rpmhcc: clock-controller {
4364                                 compatible = "qcom,sm8450-rpmh-clk";
4365                                 #clock-cells = <1>;
4366                                 clock-names = "xo";
4367                                 clocks = <&xo_board>;
4368                         };
4369 
4370                         rpmhpd: power-controller {
4371                                 compatible = "qcom,sm8450-rpmhpd";
4372                                 #power-domain-cells = <1>;
4373                                 operating-points-v2 = <&rpmhpd_opp_table>;
4374 
4375                                 rpmhpd_opp_table: opp-table {
4376                                         compatible = "operating-points-v2";
4377 
4378                                         rpmhpd_opp_ret: opp1 {
4379                                                 opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
4380                                         };
4381 
4382                                         rpmhpd_opp_min_svs: opp2 {
4383                                                 opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
4384                                         };
4385 
4386                                         rpmhpd_opp_low_svs_d1: opp3 {
4387                                                 opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
4388                                         };
4389 
4390                                         rpmhpd_opp_low_svs: opp4 {
4391                                                 opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
4392                                         };
4393 
4394                                         rpmhpd_opp_low_svs_l1: opp5 {
4395                                                 opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
4396                                         };
4397 
4398                                         rpmhpd_opp_svs: opp6 {
4399                                                 opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
4400                                         };
4401 
4402                                         rpmhpd_opp_svs_l0: opp7 {
4403                                                 opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
4404                                         };
4405 
4406                                         rpmhpd_opp_svs_l1: opp8 {
4407                                                 opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
4408                                         };
4409 
4410                                         rpmhpd_opp_svs_l2: opp9 {
4411                                                 opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
4412                                         };
4413 
4414                                         rpmhpd_opp_nom: opp10 {
4415                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
4416                                         };
4417 
4418                                         rpmhpd_opp_nom_l1: opp11 {
4419                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
4420                                         };
4421 
4422                                         rpmhpd_opp_nom_l2: opp12 {
4423                                                 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
4424                                         };
4425 
4426                                         rpmhpd_opp_turbo: opp13 {
4427                                                 opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
4428                                         };
4429 
4430                                         rpmhpd_opp_turbo_l1: opp14 {
4431                                                 opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
4432                                         };
4433                                 };
4434                         };
4435                 };
4436 
4437                 cpufreq_hw: cpufreq@17d91000 {
4438                         compatible = "qcom,sm8450-cpufreq-epss", "qcom,cpufreq-epss";
4439                         reg = <0 0x17d91000 0 0x1000>,
4440                               <0 0x17d92000 0 0x1000>,
4441                               <0 0x17d93000 0 0x1000>;
4442                         reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
4443                         clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
4444                         clock-names = "xo", "alternate";
4445                         interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
4446                                      <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
4447                                      <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
4448                         interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
4449                         #freq-domain-cells = <1>;
4450                         #clock-cells = <1>;
4451                 };
4452 
4453                 gem_noc: interconnect@19100000 {
4454                         compatible = "qcom,sm8450-gem-noc";
4455                         reg = <0 0x19100000 0 0xbb800>;
4456                         #interconnect-cells = <2>;
4457                         qcom,bcm-voters = <&apps_bcm_voter>;
4458                 };
4459 
4460                 system-cache-controller@19200000 {
4461                         compatible = "qcom,sm8450-llcc";
4462                         reg = <0 0x19200000 0 0x80000>, <0 0x19600000 0 0x80000>,
4463                               <0 0x19300000 0 0x80000>, <0 0x19700000 0 0x80000>,
4464                               <0 0x19a00000 0 0x80000>, <0 0x19c00000 0 0x80000>;
4465                         reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
4466                                     "llcc3_base", "llcc_broadcast_base",
4467                                     "llcc_broadcast_and_base";
4468                         interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
4469                 };
4470 
4471                 ufs_mem_hc: ufshc@1d84000 {
4472                         compatible = "qcom,sm8450-ufshc", "qcom,ufshc",
4473                                      "jedec,ufs-2.0";
4474                         reg = <0 0x01d84000 0 0x3000>;
4475                         interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
4476                         phys = <&ufs_mem_phy>;
4477                         phy-names = "ufsphy";
4478                         lanes-per-direction = <2>;
4479                         #reset-cells = <1>;
4480                         resets = <&gcc GCC_UFS_PHY_BCR>;
4481                         reset-names = "rst";
4482 
4483                         power-domains = <&gcc UFS_PHY_GDSC>;
4484 
4485                         iommus = <&apps_smmu 0xe0 0x0>;
4486                         dma-coherent;
4487 
4488                         interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
4489                                         <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
4490                         interconnect-names = "ufs-ddr", "cpu-ufs";
4491                         clock-names =
4492                                 "core_clk",
4493                                 "bus_aggr_clk",
4494                                 "iface_clk",
4495                                 "core_clk_unipro",
4496                                 "ref_clk",
4497                                 "tx_lane0_sync_clk",
4498                                 "rx_lane0_sync_clk",
4499                                 "rx_lane1_sync_clk";
4500                         clocks =
4501                                 <&gcc GCC_UFS_PHY_AXI_CLK>,
4502                                 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
4503                                 <&gcc GCC_UFS_PHY_AHB_CLK>,
4504                                 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
4505                                 <&rpmhcc RPMH_CXO_CLK>,
4506                                 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
4507                                 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
4508                                 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
4509                         freq-table-hz =
4510                                 <75000000 300000000>,
4511                                 <0 0>,
4512                                 <0 0>,
4513                                 <75000000 300000000>,
4514                                 <75000000 300000000>,
4515                                 <0 0>,
4516                                 <0 0>,
4517                                 <0 0>;
4518                         qcom,ice = <&ice>;
4519 
4520                         status = "disabled";
4521                 };
4522 
4523                 ufs_mem_phy: phy@1d87000 {
4524                         compatible = "qcom,sm8450-qmp-ufs-phy";
4525                         reg = <0 0x01d87000 0 0x1000>;
4526 
4527                         clock-names = "ref", "ref_aux", "qref";
4528                         clocks = <&rpmhcc RPMH_CXO_CLK>,
4529                                  <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
4530                                  <&gcc GCC_UFS_0_CLKREF_EN>;
4531 
4532                         power-domains = <&gcc UFS_PHY_GDSC>;
4533 
4534                         resets = <&ufs_mem_hc 0>;
4535                         reset-names = "ufsphy";
4536 
4537                         #clock-cells = <1>;
4538                         #phy-cells = <0>;
4539 
4540                         status = "disabled";
4541                 };
4542 
4543                 ice: crypto@1d88000 {
4544                         compatible = "qcom,sm8450-inline-crypto-engine",
4545                                      "qcom,inline-crypto-engine";
4546                         reg = <0 0x01d88000 0 0x8000>;
4547                         clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
4548                 };
4549 
4550                 cryptobam: dma-controller@1dc4000 {
4551                         compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
4552                         reg = <0 0x01dc4000 0 0x28000>;
4553                         interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
4554                         #dma-cells = <1>;
4555                         qcom,ee = <0>;
4556                         qcom,controlled-remotely;
4557                         iommus = <&apps_smmu 0x584 0x11>,
4558                                  <&apps_smmu 0x588 0x0>,
4559                                  <&apps_smmu 0x598 0x5>,
4560                                  <&apps_smmu 0x59a 0x0>,
4561                                  <&apps_smmu 0x59f 0x0>;
4562                 };
4563 
4564                 crypto: crypto@1dfa000 {
4565                         compatible = "qcom,sm8450-qce", "qcom,sm8150-qce", "qcom,qce";
4566                         reg = <0 0x01dfa000 0 0x6000>;
4567                         dmas = <&cryptobam 4>, <&cryptobam 5>;
4568                         dma-names = "rx", "tx";
4569                         iommus = <&apps_smmu 0x584 0x11>,
4570                                  <&apps_smmu 0x588 0x0>,
4571                                  <&apps_smmu 0x598 0x5>,
4572                                  <&apps_smmu 0x59a 0x0>,
4573                                  <&apps_smmu 0x59f 0x0>;
4574                         interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
4575                         interconnect-names = "memory";
4576                 };
4577 
4578                 sdhc_2: mmc@8804000 {
4579                         compatible = "qcom,sm8450-sdhci", "qcom,sdhci-msm-v5";
4580                         reg = <0 0x08804000 0 0x1000>;
4581 
4582                         interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
4583                                      <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
4584                         interrupt-names = "hc_irq", "pwr_irq";
4585 
4586                         clocks = <&gcc GCC_SDCC2_AHB_CLK>,
4587                                  <&gcc GCC_SDCC2_APPS_CLK>,
4588                                  <&rpmhcc RPMH_CXO_CLK>;
4589                         clock-names = "iface", "core", "xo";
4590                         resets = <&gcc GCC_SDCC2_BCR>;
4591                         interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
4592                                         <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
4593                         interconnect-names = "sdhc-ddr","cpu-sdhc";
4594                         iommus = <&apps_smmu 0x4a0 0x0>;
4595                         power-domains = <&rpmhpd RPMHPD_CX>;
4596                         operating-points-v2 = <&sdhc2_opp_table>;
4597                         bus-width = <4>;
4598                         dma-coherent;
4599 
4600                         /* Forbid SDR104/SDR50 - broken hw! */
4601                         sdhci-caps-mask = <0x3 0x0>;
4602 
4603                         status = "disabled";
4604 
4605                         sdhc2_opp_table: opp-table {
4606                                 compatible = "operating-points-v2";
4607 
4608                                 opp-100000000 {
4609                                         opp-hz = /bits/ 64 <100000000>;
4610                                         required-opps = <&rpmhpd_opp_low_svs>;
4611                                 };
4612 
4613                                 opp-202000000 {
4614                                         opp-hz = /bits/ 64 <202000000>;
4615                                         required-opps = <&rpmhpd_opp_svs_l1>;
4616                                 };
4617                         };
4618                 };
4619 
4620                 usb_1: usb@a6f8800 {
4621                         compatible = "qcom,sm8450-dwc3", "qcom,dwc3";
4622                         reg = <0 0x0a6f8800 0 0x400>;
4623                         status = "disabled";
4624                         #address-cells = <2>;
4625                         #size-cells = <2>;
4626                         ranges;
4627 
4628                         clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
4629                                  <&gcc GCC_USB30_PRIM_MASTER_CLK>,
4630                                  <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
4631                                  <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
4632                                  <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
4633                                  <&gcc GCC_USB3_0_CLKREF_EN>;
4634                         clock-names = "cfg_noc",
4635                                       "core",
4636                                       "iface",
4637                                       "sleep",
4638                                       "mock_utmi",
4639                                       "xo";
4640 
4641                         assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
4642                                           <&gcc GCC_USB30_PRIM_MASTER_CLK>;
4643                         assigned-clock-rates = <19200000>, <200000000>;
4644 
4645                         interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
4646                                               <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
4647                                               <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
4648                                               <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
4649                                               <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
4650                         interrupt-names = "pwr_event",
4651                                           "hs_phy_irq",
4652                                           "dp_hs_phy_irq",
4653                                           "dm_hs_phy_irq",
4654                                           "ss_phy_irq";
4655 
4656                         power-domains = <&gcc USB30_PRIM_GDSC>;
4657 
4658                         resets = <&gcc GCC_USB30_PRIM_BCR>;
4659 
4660                         interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
4661                                         <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
4662                         interconnect-names = "usb-ddr", "apps-usb";
4663 
4664                         usb_1_dwc3: usb@a600000 {
4665                                 compatible = "snps,dwc3";
4666                                 reg = <0 0x0a600000 0 0xcd00>;
4667                                 interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
4668                                 iommus = <&apps_smmu 0x0 0x0>;
4669                                 snps,dis_u2_susphy_quirk;
4670                                 snps,dis_enblslpm_quirk;
4671                                 phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
4672                                 phy-names = "usb2-phy", "usb3-phy";
4673 
4674                                 ports {
4675                                         #address-cells = <1>;
4676                                         #size-cells = <0>;
4677 
4678                                         port@0 {
4679                                                 reg = <0>;
4680 
4681                                                 usb_1_dwc3_hs: endpoint {
4682                                                 };
4683                                         };
4684 
4685                                         port@1 {
4686                                                 reg = <1>;
4687 
4688                                                 usb_1_dwc3_ss: endpoint {
4689                                                         remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
4690                                                 };
4691                                         };
4692                                 };
4693                         };
4694                 };
4695 
4696                 nsp_noc: interconnect@320c0000 {
4697                         compatible = "qcom,sm8450-nsp-noc";
4698                         reg = <0 0x320c0000 0 0x10000>;
4699                         #interconnect-cells = <2>;
4700                         qcom,bcm-voters = <&apps_bcm_voter>;
4701                 };
4702 
4703                 lpass_ag_noc: interconnect@3c40000 {
4704                         compatible = "qcom,sm8450-lpass-ag-noc";
4705                         reg = <0 0x03c40000 0 0x17200>;
4706                         #interconnect-cells = <2>;
4707                         qcom,bcm-voters = <&apps_bcm_voter>;
4708                 };
4709         };
4710 
4711         sound: sound {
4712         };
4713 
4714         thermal-zones {
4715                 aoss0-thermal {
4716                         thermal-sensors = <&tsens0 0>;
4717 
4718                         trips {
4719                                 thermal-engine-config {
4720                                         temperature = <125000>;
4721                                         hysteresis = <1000>;
4722                                         type = "passive";
4723                                 };
4724 
4725                                 reset-mon-cfg {
4726                                         temperature = <115000>;
4727                                         hysteresis = <5000>;
4728                                         type = "passive";
4729                                 };
4730                         };
4731                 };
4732 
4733                 cpuss0-thermal {
4734                         thermal-sensors = <&tsens0 1>;
4735 
4736                         trips {
4737                                 thermal-engine-config {
4738                                         temperature = <125000>;
4739                                         hysteresis = <1000>;
4740                                         type = "passive";
4741                                 };
4742 
4743                                 reset-mon-cfg {
4744                                         temperature = <115000>;
4745                                         hysteresis = <5000>;
4746                                         type = "passive";
4747                                 };
4748                         };
4749                 };
4750 
4751                 cpuss1-thermal {
4752                         thermal-sensors = <&tsens0 2>;
4753 
4754                         trips {
4755                                 thermal-engine-config {
4756                                         temperature = <125000>;
4757                                         hysteresis = <1000>;
4758                                         type = "passive";
4759                                 };
4760 
4761                                 reset-mon-cfg {
4762                                         temperature = <115000>;
4763                                         hysteresis = <5000>;
4764                                         type = "passive";
4765                                 };
4766                         };
4767                 };
4768 
4769                 cpuss3-thermal {
4770                         thermal-sensors = <&tsens0 3>;
4771 
4772                         trips {
4773                                 thermal-engine-config {
4774                                         temperature = <125000>;
4775                                         hysteresis = <1000>;
4776                                         type = "passive";
4777                                 };
4778 
4779                                 reset-mon-cfg {
4780                                         temperature = <115000>;
4781                                         hysteresis = <5000>;
4782                                         type = "passive";
4783                                 };
4784                         };
4785                 };
4786 
4787                 cpuss4-thermal {
4788                         thermal-sensors = <&tsens0 4>;
4789 
4790                         trips {
4791                                 thermal-engine-config {
4792                                         temperature = <125000>;
4793                                         hysteresis = <1000>;
4794                                         type = "passive";
4795                                 };
4796 
4797                                 reset-mon-cfg {
4798                                         temperature = <115000>;
4799                                         hysteresis = <5000>;
4800                                         type = "passive";
4801                                 };
4802                         };
4803                 };
4804 
4805                 cpu4-top-thermal {
4806                         thermal-sensors = <&tsens0 5>;
4807 
4808                         trips {
4809                                 cpu4_top_alert0: trip-point0 {
4810                                         temperature = <90000>;
4811                                         hysteresis = <2000>;
4812                                         type = "passive";
4813                                 };
4814 
4815                                 cpu4_top_alert1: trip-point1 {
4816                                         temperature = <95000>;
4817                                         hysteresis = <2000>;
4818                                         type = "passive";
4819                                 };
4820 
4821                                 cpu4_top_crit: cpu-crit {
4822                                         temperature = <110000>;
4823                                         hysteresis = <1000>;
4824                                         type = "critical";
4825                                 };
4826                         };
4827                 };
4828 
4829                 cpu4-bottom-thermal {
4830                         thermal-sensors = <&tsens0 6>;
4831 
4832                         trips {
4833                                 cpu4_bottom_alert0: trip-point0 {
4834                                         temperature = <90000>;
4835                                         hysteresis = <2000>;
4836                                         type = "passive";
4837                                 };
4838 
4839                                 cpu4_bottom_alert1: trip-point1 {
4840                                         temperature = <95000>;
4841                                         hysteresis = <2000>;
4842                                         type = "passive";
4843                                 };
4844 
4845                                 cpu4_bottom_crit: cpu-crit {
4846                                         temperature = <110000>;
4847                                         hysteresis = <1000>;
4848                                         type = "critical";
4849                                 };
4850                         };
4851                 };
4852 
4853                 cpu5-top-thermal {
4854                         thermal-sensors = <&tsens0 7>;
4855 
4856                         trips {
4857                                 cpu5_top_alert0: trip-point0 {
4858                                         temperature = <90000>;
4859                                         hysteresis = <2000>;
4860                                         type = "passive";
4861                                 };
4862 
4863                                 cpu5_top_alert1: trip-point1 {
4864                                         temperature = <95000>;
4865                                         hysteresis = <2000>;
4866                                         type = "passive";
4867                                 };
4868 
4869                                 cpu5_top_crit: cpu-crit {
4870                                         temperature = <110000>;
4871                                         hysteresis = <1000>;
4872                                         type = "critical";
4873                                 };
4874                         };
4875                 };
4876 
4877                 cpu5-bottom-thermal {
4878                         thermal-sensors = <&tsens0 8>;
4879 
4880                         trips {
4881                                 cpu5_bottom_alert0: trip-point0 {
4882                                         temperature = <90000>;
4883                                         hysteresis = <2000>;
4884                                         type = "passive";
4885                                 };
4886 
4887                                 cpu5_bottom_alert1: trip-point1 {
4888                                         temperature = <95000>;
4889                                         hysteresis = <2000>;
4890                                         type = "passive";
4891                                 };
4892 
4893                                 cpu5_bottom_crit: cpu-crit {
4894                                         temperature = <110000>;
4895                                         hysteresis = <1000>;
4896                                         type = "critical";
4897                                 };
4898                         };
4899                 };
4900 
4901                 cpu6-top-thermal {
4902                         thermal-sensors = <&tsens0 9>;
4903 
4904                         trips {
4905                                 cpu6_top_alert0: trip-point0 {
4906                                         temperature = <90000>;
4907                                         hysteresis = <2000>;
4908                                         type = "passive";
4909                                 };
4910 
4911                                 cpu6_top_alert1: trip-point1 {
4912                                         temperature = <95000>;
4913                                         hysteresis = <2000>;
4914                                         type = "passive";
4915                                 };
4916 
4917                                 cpu6_top_crit: cpu-crit {
4918                                         temperature = <110000>;
4919                                         hysteresis = <1000>;
4920                                         type = "critical";
4921                                 };
4922                         };
4923                 };
4924 
4925                 cpu6-bottom-thermal {
4926                         thermal-sensors = <&tsens0 10>;
4927 
4928                         trips {
4929                                 cpu6_bottom_alert0: trip-point0 {
4930                                         temperature = <90000>;
4931                                         hysteresis = <2000>;
4932                                         type = "passive";
4933                                 };
4934 
4935                                 cpu6_bottom_alert1: trip-point1 {
4936                                         temperature = <95000>;
4937                                         hysteresis = <2000>;
4938                                         type = "passive";
4939                                 };
4940 
4941                                 cpu6_bottom_crit: cpu-crit {
4942                                         temperature = <110000>;
4943                                         hysteresis = <1000>;
4944                                         type = "critical";
4945                                 };
4946                         };
4947                 };
4948 
4949                 cpu7-top-thermal {
4950                         thermal-sensors = <&tsens0 11>;
4951 
4952                         trips {
4953                                 cpu7_top_alert0: trip-point0 {
4954                                         temperature = <90000>;
4955                                         hysteresis = <2000>;
4956                                         type = "passive";
4957                                 };
4958 
4959                                 cpu7_top_alert1: trip-point1 {
4960                                         temperature = <95000>;
4961                                         hysteresis = <2000>;
4962                                         type = "passive";
4963                                 };
4964 
4965                                 cpu7_top_crit: cpu-crit {
4966                                         temperature = <110000>;
4967                                         hysteresis = <1000>;
4968                                         type = "critical";
4969                                 };
4970                         };
4971                 };
4972 
4973                 cpu7-middle-thermal {
4974                         thermal-sensors = <&tsens0 12>;
4975 
4976                         trips {
4977                                 cpu7_middle_alert0: trip-point0 {
4978                                         temperature = <90000>;
4979                                         hysteresis = <2000>;
4980                                         type = "passive";
4981                                 };
4982 
4983                                 cpu7_middle_alert1: trip-point1 {
4984                                         temperature = <95000>;
4985                                         hysteresis = <2000>;
4986                                         type = "passive";
4987                                 };
4988 
4989                                 cpu7_middle_crit: cpu-crit {
4990                                         temperature = <110000>;
4991                                         hysteresis = <1000>;
4992                                         type = "critical";
4993                                 };
4994                         };
4995                 };
4996 
4997                 cpu7-bottom-thermal {
4998                         thermal-sensors = <&tsens0 13>;
4999 
5000                         trips {
5001                                 cpu7_bottom_alert0: trip-point0 {
5002                                         temperature = <90000>;
5003                                         hysteresis = <2000>;
5004                                         type = "passive";
5005                                 };
5006 
5007                                 cpu7_bottom_alert1: trip-point1 {
5008                                         temperature = <95000>;
5009                                         hysteresis = <2000>;
5010                                         type = "passive";
5011                                 };
5012 
5013                                 cpu7_bottom_crit: cpu-crit {
5014                                         temperature = <110000>;
5015                                         hysteresis = <1000>;
5016                                         type = "critical";
5017                                 };
5018                         };
5019                 };
5020 
5021                 gpu-top-thermal {
5022                         polling-delay-passive = <10>;
5023 
5024                         thermal-sensors = <&tsens0 14>;
5025 
5026                         cooling-maps {
5027                                 map0 {
5028                                         trip = <&gpu_top_alert0>;
5029                                         cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5030                                 };
5031                         };
5032 
5033                         trips {
5034                                 gpu_top_alert0: trip-point0 {
5035                                         temperature = <85000>;
5036                                         hysteresis = <1000>;
5037                                         type = "passive";
5038                                 };
5039 
5040                                 trip-point1 {
5041                                         temperature = <90000>;
5042                                         hysteresis = <1000>;
5043                                         type = "hot";
5044                                 };
5045 
5046                                 trip-point2 {
5047                                         temperature = <110000>;
5048                                         hysteresis = <1000>;
5049                                         type = "critical";
5050                                 };
5051                         };
5052                 };
5053 
5054                 gpu-bottom-thermal {
5055                         polling-delay-passive = <10>;
5056 
5057                         thermal-sensors = <&tsens0 15>;
5058 
5059                         cooling-maps {
5060                                 map0 {
5061                                         trip = <&gpu_bottom_alert0>;
5062                                         cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
5063                                 };
5064                         };
5065 
5066                         trips {
5067                                 gpu_bottom_alert0: trip-point0 {
5068                                         temperature = <85000>;
5069                                         hysteresis = <1000>;
5070                                         type = "passive";
5071                                 };
5072 
5073                                 trip-point1 {
5074                                         temperature = <90000>;
5075                                         hysteresis = <1000>;
5076                                         type = "hot";
5077                                 };
5078 
5079                                 trip-point2 {
5080                                         temperature = <110000>;
5081                                         hysteresis = <1000>;
5082                                         type = "critical";
5083                                 };
5084                         };
5085                 };
5086 
5087                 aoss1-thermal {
5088                         thermal-sensors = <&tsens1 0>;
5089 
5090                         trips {
5091                                 thermal-engine-config {
5092                                         temperature = <125000>;
5093                                         hysteresis = <1000>;
5094                                         type = "passive";
5095                                 };
5096 
5097                                 reset-mon-cfg {
5098                                         temperature = <115000>;
5099                                         hysteresis = <5000>;
5100                                         type = "passive";
5101                                 };
5102                         };
5103                 };
5104 
5105                 cpu0-thermal {
5106                         thermal-sensors = <&tsens1 1>;
5107 
5108                         trips {
5109                                 cpu0_alert0: trip-point0 {
5110                                         temperature = <90000>;
5111                                         hysteresis = <2000>;
5112                                         type = "passive";
5113                                 };
5114 
5115                                 cpu0_alert1: trip-point1 {
5116                                         temperature = <95000>;
5117                                         hysteresis = <2000>;
5118                                         type = "passive";
5119                                 };
5120 
5121                                 cpu0_crit: cpu-crit {
5122                                         temperature = <110000>;
5123                                         hysteresis = <1000>;
5124                                         type = "critical";
5125                                 };
5126                         };
5127                 };
5128 
5129                 cpu1-thermal {
5130                         thermal-sensors = <&tsens1 2>;
5131 
5132                         trips {
5133                                 cpu1_alert0: trip-point0 {
5134                                         temperature = <90000>;
5135                                         hysteresis = <2000>;
5136                                         type = "passive";
5137                                 };
5138 
5139                                 cpu1_alert1: trip-point1 {
5140                                         temperature = <95000>;
5141                                         hysteresis = <2000>;
5142                                         type = "passive";
5143                                 };
5144 
5145                                 cpu1_crit: cpu-crit {
5146                                         temperature = <110000>;
5147                                         hysteresis = <1000>;
5148                                         type = "critical";
5149                                 };
5150                         };
5151                 };
5152 
5153                 cpu2-thermal {
5154                         thermal-sensors = <&tsens1 3>;
5155 
5156                         trips {
5157                                 cpu2_alert0: trip-point0 {
5158                                         temperature = <90000>;
5159                                         hysteresis = <2000>;
5160                                         type = "passive";
5161                                 };
5162 
5163                                 cpu2_alert1: trip-point1 {
5164                                         temperature = <95000>;
5165                                         hysteresis = <2000>;
5166                                         type = "passive";
5167                                 };
5168 
5169                                 cpu2_crit: cpu-crit {
5170                                         temperature = <110000>;
5171                                         hysteresis = <1000>;
5172                                         type = "critical";
5173                                 };
5174                         };
5175                 };
5176 
5177                 cpu3-thermal {
5178                         thermal-sensors = <&tsens1 4>;
5179 
5180                         trips {
5181                                 cpu3_alert0: trip-point0 {
5182                                         temperature = <90000>;
5183                                         hysteresis = <2000>;
5184                                         type = "passive";
5185                                 };
5186 
5187                                 cpu3_alert1: trip-point1 {
5188                                         temperature = <95000>;
5189                                         hysteresis = <2000>;
5190                                         type = "passive";
5191                                 };
5192 
5193                                 cpu3_crit: cpu-crit {
5194                                         temperature = <110000>;
5195                                         hysteresis = <1000>;
5196                                         type = "critical";
5197                                 };
5198                         };
5199                 };
5200 
5201                 cdsp0-thermal {
5202                         polling-delay-passive = <10>;
5203 
5204                         thermal-sensors = <&tsens1 5>;
5205 
5206                         trips {
5207                                 thermal-engine-config {
5208                                         temperature = <125000>;
5209                                         hysteresis = <1000>;
5210                                         type = "passive";
5211                                 };
5212 
5213                                 thermal-hal-config {
5214                                         temperature = <125000>;
5215                                         hysteresis = <1000>;
5216                                         type = "passive";
5217                                 };
5218 
5219                                 reset-mon-cfg {
5220                                         temperature = <115000>;
5221                                         hysteresis = <5000>;
5222                                         type = "passive";
5223                                 };
5224 
5225                                 cdsp_0_config: junction-config {
5226                                         temperature = <95000>;
5227                                         hysteresis = <5000>;
5228                                         type = "passive";
5229                                 };
5230                         };
5231                 };
5232 
5233                 cdsp1-thermal {
5234                         polling-delay-passive = <10>;
5235 
5236                         thermal-sensors = <&tsens1 6>;
5237 
5238                         trips {
5239                                 thermal-engine-config {
5240                                         temperature = <125000>;
5241                                         hysteresis = <1000>;
5242                                         type = "passive";
5243                                 };
5244 
5245                                 thermal-hal-config {
5246                                         temperature = <125000>;
5247                                         hysteresis = <1000>;
5248                                         type = "passive";
5249                                 };
5250 
5251                                 reset-mon-cfg {
5252                                         temperature = <115000>;
5253                                         hysteresis = <5000>;
5254                                         type = "passive";
5255                                 };
5256 
5257                                 cdsp_1_config: junction-config {
5258                                         temperature = <95000>;
5259                                         hysteresis = <5000>;
5260                                         type = "passive";
5261                                 };
5262                         };
5263                 };
5264 
5265                 cdsp2-thermal {
5266                         polling-delay-passive = <10>;
5267 
5268                         thermal-sensors = <&tsens1 7>;
5269 
5270                         trips {
5271                                 thermal-engine-config {
5272                                         temperature = <125000>;
5273                                         hysteresis = <1000>;
5274                                         type = "passive";
5275                                 };
5276 
5277                                 thermal-hal-config {
5278                                         temperature = <125000>;
5279                                         hysteresis = <1000>;
5280                                         type = "passive";
5281                                 };
5282 
5283                                 reset-mon-cfg {
5284                                         temperature = <115000>;
5285                                         hysteresis = <5000>;
5286                                         type = "passive";
5287                                 };
5288 
5289                                 cdsp_2_config: junction-config {
5290                                         temperature = <95000>;
5291                                         hysteresis = <5000>;
5292                                         type = "passive";
5293                                 };
5294                         };
5295                 };
5296 
5297                 video-thermal {
5298                         thermal-sensors = <&tsens1 8>;
5299 
5300                         trips {
5301                                 thermal-engine-config {
5302                                         temperature = <125000>;
5303                                         hysteresis = <1000>;
5304                                         type = "passive";
5305                                 };
5306 
5307                                 reset-mon-cfg {
5308                                         temperature = <115000>;
5309                                         hysteresis = <5000>;
5310                                         type = "passive";
5311                                 };
5312                         };
5313                 };
5314 
5315                 mem-thermal {
5316                         polling-delay-passive = <10>;
5317 
5318                         thermal-sensors = <&tsens1 9>;
5319 
5320                         trips {
5321                                 thermal-engine-config {
5322                                         temperature = <125000>;
5323                                         hysteresis = <1000>;
5324                                         type = "passive";
5325                                 };
5326 
5327                                 ddr_config0: ddr0-config {
5328                                         temperature = <90000>;
5329                                         hysteresis = <5000>;
5330                                         type = "passive";
5331                                 };
5332 
5333                                 reset-mon-cfg {
5334                                         temperature = <115000>;
5335                                         hysteresis = <5000>;
5336                                         type = "passive";
5337                                 };
5338                         };
5339                 };
5340 
5341                 modem0-thermal {
5342                         thermal-sensors = <&tsens1 10>;
5343 
5344                         trips {
5345                                 thermal-engine-config {
5346                                         temperature = <125000>;
5347                                         hysteresis = <1000>;
5348                                         type = "passive";
5349                                 };
5350 
5351                                 mdmss0_config0: mdmss0-config0 {
5352                                         temperature = <102000>;
5353                                         hysteresis = <3000>;
5354                                         type = "passive";
5355                                 };
5356 
5357                                 mdmss0_config1: mdmss0-config1 {
5358                                         temperature = <105000>;
5359                                         hysteresis = <3000>;
5360                                         type = "passive";
5361                                 };
5362 
5363                                 reset-mon-cfg {
5364                                         temperature = <115000>;
5365                                         hysteresis = <5000>;
5366                                         type = "passive";
5367                                 };
5368                         };
5369                 };
5370 
5371                 modem1-thermal {
5372                         thermal-sensors = <&tsens1 11>;
5373 
5374                         trips {
5375                                 thermal-engine-config {
5376                                         temperature = <125000>;
5377                                         hysteresis = <1000>;
5378                                         type = "passive";
5379                                 };
5380 
5381                                 mdmss1_config0: mdmss1-config0 {
5382                                         temperature = <102000>;
5383                                         hysteresis = <3000>;
5384                                         type = "passive";
5385                                 };
5386 
5387                                 mdmss1_config1: mdmss1-config1 {
5388                                         temperature = <105000>;
5389                                         hysteresis = <3000>;
5390                                         type = "passive";
5391                                 };
5392 
5393                                 reset-mon-cfg {
5394                                         temperature = <115000>;
5395                                         hysteresis = <5000>;
5396                                         type = "passive";
5397                                 };
5398                         };
5399                 };
5400 
5401                 modem2-thermal {
5402                         thermal-sensors = <&tsens1 12>;
5403 
5404                         trips {
5405                                 thermal-engine-config {
5406                                         temperature = <125000>;
5407                                         hysteresis = <1000>;
5408                                         type = "passive";
5409                                 };
5410 
5411                                 mdmss2_config0: mdmss2-config0 {
5412                                         temperature = <102000>;
5413                                         hysteresis = <3000>;
5414                                         type = "passive";
5415                                 };
5416 
5417                                 mdmss2_config1: mdmss2-config1 {
5418                                         temperature = <105000>;
5419                                         hysteresis = <3000>;
5420                                         type = "passive";
5421                                 };
5422 
5423                                 reset-mon-cfg {
5424                                         temperature = <115000>;
5425                                         hysteresis = <5000>;
5426                                         type = "passive";
5427                                 };
5428                         };
5429                 };
5430 
5431                 modem3-thermal {
5432                         thermal-sensors = <&tsens1 13>;
5433 
5434                         trips {
5435                                 thermal-engine-config {
5436                                         temperature = <125000>;
5437                                         hysteresis = <1000>;
5438                                         type = "passive";
5439                                 };
5440 
5441                                 mdmss3_config0: mdmss3-config0 {
5442                                         temperature = <102000>;
5443                                         hysteresis = <3000>;
5444                                         type = "passive";
5445                                 };
5446 
5447                                 mdmss3_config1: mdmss3-config1 {
5448                                         temperature = <105000>;
5449                                         hysteresis = <3000>;
5450                                         type = "passive";
5451                                 };
5452 
5453                                 reset-mon-cfg {
5454                                         temperature = <115000>;
5455                                         hysteresis = <5000>;
5456                                         type = "passive";
5457                                 };
5458                         };
5459                 };
5460 
5461                 camera0-thermal {
5462                         thermal-sensors = <&tsens1 14>;
5463 
5464                         trips {
5465                                 thermal-engine-config {
5466                                         temperature = <125000>;
5467                                         hysteresis = <1000>;
5468                                         type = "passive";
5469                                 };
5470 
5471                                 reset-mon-cfg {
5472                                         temperature = <115000>;
5473                                         hysteresis = <5000>;
5474                                         type = "passive";
5475                                 };
5476                         };
5477                 };
5478 
5479                 camera1-thermal {
5480                         thermal-sensors = <&tsens1 15>;
5481 
5482                         trips {
5483                                 thermal-engine-config {
5484                                         temperature = <125000>;
5485                                         hysteresis = <1000>;
5486                                         type = "passive";
5487                                 };
5488 
5489                                 reset-mon-cfg {
5490                                         temperature = <115000>;
5491                                         hysteresis = <5000>;
5492                                         type = "passive";
5493                                 };
5494                         };
5495                 };
5496         };
5497 
5498         timer {
5499                 compatible = "arm,armv8-timer";
5500                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
5501                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
5502                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
5503                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
5504                 clock-frequency = <19200000>;
5505         };
5506 };

~ [ source navigation ] ~ [ diff markup ] ~ [ identifier search ] ~

kernel.org | git.kernel.org | LWN.net | Project Home | SVN repository | Mail admin

Linux® is a registered trademark of Linus Torvalds in the United States and other countries.
TOMOYO® is a registered trademark of NTT DATA CORPORATION.

sflogo.php